Flaw detector Product List and Ranking from 63 Manufacturers, Suppliers and Companies

Case Studies of Demonstration Tests Using PVT Detectors

We are publishing a demonstration experiment using a PVT detector!

This case study collection presents the demonstration tests of a pass-through decontamination waste and radioactivity measurement device using a PVT detector, conducted by a company that imports and sells various products including radiation measurement devices, X-ray non-destructive testing equipment, goniometers, X-ray optical instruments, as well as freezers and bio-sample refrigerators. In the decontamination project following the nuclear power plant accident, tests were conducted with the aim of quickly sorting and reducing the large amounts of contaminated waste generated, measuring the radiation concentration, and moving it to intermediate storage facilities. The PTV detector was installed in a spatial dose rate field of 0.35-0.4 μSv/hr, which is close to actual installation conditions, to demonstrate the performance of the device. As a result of the demonstration tests, it was confirmed that stable results could be obtained by measuring accident shielding and standard samples (samples taken from the material and quantitatively analyzed using Ge or NaI) according to the vehicles passing after installation, and calculating the conversion counts. [Overview] ■ Demonstration tests of a pass-through decontamination waste and radioactivity measurement device using a PVT detector *For more details, please refer to the catalog or feel free to contact us.

Company：仁木工芸
Price：Other

Radiation detector
Flaw detector

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Ultrasonic Flaw Detector 'USMGo+'

Design based on ergonomics! It can also be used for inspections in narrow spaces and difficult-to-access areas.

"USMGo+" is a compact, lightweight ultrasonic flaw detector designed based on ergonomic principles, with a palm-sized form factor. It features a compact design weighing only 850g (including the battery). It can be used for inspections in tight spaces or areas that are difficult to access. Additionally, despite its compact body, it has a large screen measuring 64.8×108mm (H×W) and a high-resolution display of 480×800 pixels, ensuring visibility even outdoors with a color screen that is easy to read. 【Features】 - Ergonomic, robust, compact, and lightweight design - Palm-sized - Compact - Weighs only 850g (including the battery) - Usable for inspections in tight spaces or areas that are difficult to access *For more details, please refer to the PDF document or feel free to contact us.

Company：KS-NET
Price：Other

Other inspection equipment and devices
Flaw detector

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High-performance, high-resolution portable ultrasonic flaw detector 'USN60'

Large screen with 640×480 pixels! Compatible with a wide range of applications.

The "USN60" is a high-performance, high-resolution portable digital flaw detector equipped with standard VGA functionality. It can be used as a portable device suitable for field inspections, as well as a versatile system device, accommodating a wide range of applications. Additionally, a 19" rack model option is available. 【Features】 ■ High performance and high resolution: Large VGA screen with 640×480 pixels ■ Excellent waveform tracking: Screen refresh rate of 60Hz ■ Pulse repetition frequency: Up to 6000Hz ■ Wide measurement range: 1 to 27940mm ■ 19" rack model available (for immersion testing, system applications, etc.) *For more details, please refer to the PDF document or feel free to contact us.

Company：KS-NET
Price：Other

Other inspection equipment and devices
Flaw detector

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Portable Ultrasonic Flaw Detector 'EPOCH 6LT'

Easy to carry! The standard handheld ultrasonic flaw detector.

The portable ultrasonic flaw detector 'EPOCH 6LT' combines the powerful features of an ultrasonic flaw detector with the portability required for rope access and various field inspections. It is easy to carry and use, featuring an ergonomic design and robustness that ensure comfortable flaw testing. 【Features】 - Lightweight and compact design for easy operation - Weighs 890g (including battery) - Menu selection and adjustment of settings can be operated with one hand - Rated IP65/67, with confirmed drop resistance - Complies with the requirements of EN12668-2010 - A-scan is readable in both bright and dark environments *For more details, please refer to the PDF document or feel free to contact us.

Company：KS-NET
Price：1 million yen-5 million yen

Other inspection equipment and devices
Flaw detector

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Portable Phased Array Ultrasonic Flaw Detector 'Mentor UT'

Excels particularly in mapping for corrosion! A powerful ultrasonic flaw detector with excellent connectivity.

"Mentor UT" features an intuitive touchscreen user interface and customizable inspection applications, making powerful array ultrasonic testing a part of everyday life. Setting inspection conditions and various configurations can be performed according to on-screen guides, improving inspection efficiency. 【Features】 ■ A powerful 32:32 configuration array ultrasonic testing device with conventional UT channels ■ In addition to the standard corrosion inspection application, the ability to create custom inspection applications ■ Smooth report generation with standard analysis and data export functions ■ Industry-leading capabilities ■ Lightweight body weighing approximately 2.9 kg *For more details, please refer to the PDF document or feel free to contact us.

Company：KS-NET
Price：Other

Other inspection equipment and devices
Flaw detector

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Notice of Manufacturing Subsidy

For more details, please view the flyer by downloading the PDF. Also, feel free to contact us regarding the discounted prices.

Company：KS-NET
Price：Other

Ultrasonic Oscillator
Flaw detector

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Portable Ultrasonic Flaw Detector 'UI-S9'

Pursuing even greater ease of use! Meeting both on-site needs and testing needs with a single model.

The "UI-S9" is a portable ultrasonic flaw detector designed for ease of operation. With compliance to JSNDI specifications, it is possible to meet both on-site needs and testing requirements with a single model. It features high waterproofing and visibility, and has a compact design. 【Features】 ■ Complies with JSNDI specifications ■ High waterproofing and visibility ■ Compact design ■ Equipped with high-brightness LED LCD ■ Intuitive operation with direct keys *For more details, please refer to the PDF document or feel free to contact us.

Company：KS-NET
Price：Other

Flaw detection testing
Flaw detector

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Rotary Eddy Current Testing Device "EDDIO ROTO-EDX"

Detection parameters and the ability to save and reproduce detection waveforms! Four probes rotate to detect flaws at high speed.

"EDDIO ROTO-EDX" is an inspection device that detects scattered defects in tubular and rod-shaped metal primary products using non-contact, high-speed eddy current testing. The main screen allows for easy operation and settings of rotation, penetration, testing parameters, judgment parameters, and common parameters via a touch panel. Additionally, the display of longitudinal defect positions color-codes the size of the defects, making it easy to identify their locations. 【Features】 ■ Excellent operability ■ Self-diagnosis function included ■ AGC function included ■ Windows compatible ■ Expansion for penetration ECT is possible *For more details, please refer to the PDF document or feel free to contact us.

Company：KS-NET
Price：Other

Other inspection equipment and devices
Flaw detection testing
Flaw detector

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Eddy current testing device for rolling rolls "ROLL-ECT"

Automatic flaw detection for rolling rolls! Multi-channel processing is also possible to improve processing speed.

"ROLL-ECT" is an electronic device optimized for the inspection of rolled products, combining sensors that can automatically detect defects scattered across the roll without the need for complex setups for each inspection. It features a user-friendly interface compatible with Windows, allowing for easy operation via a touchscreen. Inspection data can be saved to an internal PC or external HDD, enabling smarter management of roll defects than ever before. 【Features】 ■ Excellent operability designed for Japanese users ■ Ability to save and replay inspection waveforms ■ Capability to expand sensors to 2 channels ■ Dual frequency compatibility ■ Equipped with self-diagnostic functions *For more details, please refer to the related link page or feel free to contact us.

Company：KS-NET
Price：Other

Other inspection equipment and devices
Flaw detection testing
Flaw detector

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

"Solutions for Challenges in Non-Destructive Testing" *Materials such as Q&A collection will be provided.

Are you struggling with non-destructive testing issues such as measuring pipe wall thickness, reducing inspection time, and detecting welding defects?

Our company is engaged in the sale of non-destructive testing equipment such as ultrasonic flaw detectors, industrial endoscopes, and radiographic inspection devices, as well as inspection calibration, repair, and rental services. Based on the technology and experience accumulated over more than 20 years, we can provide total solutions that lead to solving our customers' challenges. If you have concerns about inspection and measurement, please feel free to consult with us. 【We can solve the following issues】 - I want to measure the wall thickness of pipes. - I want to increase inspection speed. - I want to inline non-destructive testing. - I want to find welding defects. - I don't know the appropriate inspection method. *We are currently offering a Q&A collection that summarizes frequently asked questions about non-destructive testing. You can view it by clicking on "PDF Download."

Company：KS-NET
Price：Other

Contract Inspection
Other inspection equipment and devices
Flaw detector

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Portable Ultrasonic Flaw Detector 'EPOCH 650'

High mobility to accommodate a wide range of applications! Equipped with excellent detection performance in a compact body.

The portable ultrasonic flaw detector "EPOCH 650" combines ease of use and high performance, featuring a portable design that accommodates various inspection environments. With its lightweight and ergonomic design, it is easy to carry and excels in durability and flexibility, delivering performance in any field. 【Features】 - Battery life: approximately 15 hours - Weight: 1.6 kg (including battery) - Full VGA display readable indoors and in sunlight - Rated IP66/67, also evaluated for drop resistance - Compliant with EN12668-1 - Two selectable operation pads *For more details, please refer to the PDF materials or feel free to contact us.

Company：KS-NET
Price：1 million yen-5 million yen

Other inspection equipment and devices
Flaw detector

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Laser inspection device 'LIST30'

If it reflects light, it can be inspected! Non-contact, high-speed inspection of tiny scratches is performed.

The "LIST30" is a laser inspection device that irradiates laser light onto the surface of inspection materials and determines pass or fail based on changes in the amount of reflected light received. It allows for easy and reliable inspection of tiny scratches on catheters and injection needles. In recent years, as quality improvement has progressed, this is the first attempt in a long history. It enables automatic inspection of extremely fine wires (less than Φ1mm), which have generally been considered difficult to inspect. 【Features】 ■ Full inspection is possible by arranging the light-receiving part according to the work shape. ■ Changes in reflected light are processed with filters, allowing for noise-resistant judgment. ■ Any object that reflects light can be inspected. ■ Detection capability increases with the smoothness of the surface. ■ Pass/Fail judgment can be made at any arbitrary threshold. *For more details, please refer to the PDF materials or feel free to contact us.

Company：KS-NET
Price：Other

Defect Inspection Equipment
Flaw detector

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Steel Material Identifier "Sam Steel Checker"

Are you sure about the material of the steel you are using? ~To prevent contamination with different materials~

It is a steel material identifier that can be used for various applications. It is a product that shows little variation depending on the skill level of the technician. 【Features】 ■ Non-destructive measurement ■ Portable and easy to carry ■ No expertise required (measurement time is approximately 5 seconds)

Company：KS-NET
Price：Other

Other inspection equipment and devices
Flaw detector

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Ultrasonic flaw detector 'USM38 JE'

The long-awaited ultrasonic flaw detector has evolved and is back!

The USM38 JE is the successor to the USM35X JE. It complies with the basic operational specifications of the "JSNDI Specification Digital Ultrasonic Flaw Detector" set by the Japan Non-Destructive Testing Association. Basically, the key layout, menu structure, and operation are the same as the USM35X JE. It has been made even easier to use and its functionality has been improved. Screenshots and flaw detection data can be saved to an SD card, making it a versatile ultrasonic flaw detector suitable for a wide range of inspections. *Starting in 2027, it will be the device used for lending in the UT practical examination by JSNDI. (The choice between G type and R type will no longer be available.) 【Features】 ■ No operational stress due to the same key layout and menu structure as the USM35X JE. ■ Equipped with JIS-DAC function (up to 16 points recording) and S-DAC function (distance-amplitude characteristic curve). ■ Features color-coded display for angle skip points. (Color-coded display on the screen every 0.5S, 1.0S, and 1.5S) ■ Battery operating time is 13 hours. (When using standard lithium-ion battery) ■ Screen display colors can be selected according to the working environment. ■ Can connect to external monitors or projectors via VGA output with a dedicated cable.

Company：KS-NET
Price：1 million yen-5 million yen

Flaw detection testing
Flaw detector

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Magnetization (Pulse magnetic field / Static magnetic field generation method, etc.)

A rich selection of high-voltage capacitor types, including capacitor-based and electrolytic capacitors!

"Magnetizing equipment" is an energy supply device that creates the "high magnetic field" necessary for magnetizing magnetic materials. It is an essential device for the magnetization of permanent magnets. The catalog features a rich lineup, from the "static magnetic field generation method" for generating high magnetic fields to the "pulsed magnetic field generation method" for generating high magnetic fields instantaneously. You can choose the optimal device that meets the needs of the field. 【Lineup】 ■ Pulsed magnetic field generation method 　□ High-voltage capacitor type 　□ Large-capacity capacitor type 　□ Electrolytic capacitor type ■ Static magnetic field generation method 　□ Electromagnet type 　□ Coil type *For more details, please download the catalog or contact us.

Company：日本電磁測器
Price：Other

Other energy equipment
Flaw detector

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Pear-shaped sedimentation meter MST-1

You can check the amount of magnetic powder sediment after placing the inspection liquid in use and letting it stand for 30 minutes.

In the JIS-Z2320 standard test specimen verification method, the concentration of magnetic particles is typically specified to be in the range of 2 to 10 g/L for non-fluorescent wet methods and 0.2 to 2 g/L for fluorescent wet methods. In magnetic particle testing, it is essential to carefully manage the concentration of magnetic particles in the inspection liquid. According to JIS, the concentration of magnetic particles in the inspection liquid is expressed as the volume of the sediment of magnetic particles contained in a unit volume of the inspection liquid (100 mL). By placing the inspection liquid in a sedimentation gauge and allowing it to stand for 30 minutes, the concentration of magnetic particles can be measured by directly reading the scale of the sedimentation amount. Generally, the volume of magnetic particles contained in 100 mL is approximately 0.09 to 0.2 cc for fluorescent magnetic particles and about 1.7 to 2.4 cc for non-fluorescent wet methods. For more details, please contact us or refer to the catalog.

Company：日本電磁測器
Price：Other

Other measurement, recording and measuring instruments
Flaw detector

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Steel choke

You can mark the position of the wound with a vivid color.

Steel chalk is used for marking the location of defects detected during inspection. It can mark vividly even on wet steel after inspection. Additionally, it has a color tone that is easy to see even outside of a darkroom. It can be easily wiped off with a cloth after use.

Company：日本電磁測器
Price：Less than 10,000 yen

Plastic processing machines (cutting and rolling)
Flaw detector

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

DC Inversion Demagnetization Device "LF-20M"

A demagnetization device that can easily handle steel materials with a large cross-sectional area and residual magnetic properties.

The "LF-20M" is a direct current demagnetization device that allows for the demagnetization of internal magnetism using a DC inversion method. It adopts the single-phase full-wave rectification unit "GD10-5," which enables attenuation demagnetization through DC inversion. Additionally, since it uses single-phase full-wave rectification, it is particularly effective for large cross-sectional areas such as round steel bars, pipes, bundle demagnetization, and thick plates. 【Features】 ■ Capable of demagnetizing internal magnetism ■ Effective for large cross-sectional areas such as round steel bars, pipes, bundle demagnetization, and thick plates ■ Adopts the single-phase full-wave rectification unit "GD10-5" *For more details, please refer to the PDF document or feel free to contact us.

Company：日本電磁測器
Price：Other

Other machine elements
Flaw detector

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Large Screen Portable Eddy Current Tester ELOTEST M3

High-performance portable eddy current flaw detector with a 5.7-inch large screen LCD.

The newly developed ELOTEST M3 is a portable eddy current flaw detector based on the minimal and lightweight ELOTEST M2, featuring a large LCD screen with excellent image quality and brightness as its main characteristic. In inspection sites, when multiple technicians need to view the flaw detection signals on a single screen simultaneously, or when it becomes difficult to support the device with both hands for probe holding, the ELOTEST M3 offers the optimal choice with its large screen and lightweight design.

Company：ローマン・ジャパンローマン・ジャパン株式会社
Price：Other

Defect Inspection Equipment
Flaw detector

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Portable Eddy Current Tester M2V3

World's smallest and lightest portable eddy current flaw detector M2V3

The world's smallest and lightest portable eddy current flaw detector based on ergonomics. The ELOTEST M2V3 is equipped with dual frequencies (with mixing function) and is ideal for manual inspections (surface cracks, internal defects in boreholes, internal defects in multilayer structures), and it also has conductivity and film thickness measurement capabilities. The inspection frequency range is 10Hz-12MHz, achieving optimal signal processing through full filter functions (LP, HP, BP). The high-resolution LCD display achieves perfect contrast, making it easy to read in any lighting environment. A calibration standard test piece is mounted on the handle for instant signal verification. With nine keys using pictograms, all functions can be accessed from the setup menu, making it a user-friendly model for field operators.

Company：ローマン・ジャパンローマン・ジャパン株式会社
Price：Other

Defect Inspection Equipment
Flaw detector

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

The pinnacle of eddy current testing systems for high-resolution high-speed inspection: PL500.

Achieving high-resolution flaw detection and high-speed material sorting with an eddy current testing system on the manufacturing line.

Faster, higher, stronger—this series of eddy current testing equipment equipped with V5 technology combines ultra-high-speed inspection, ultra-high sensitivity, ultra-high resolution, and signal dynamics to provide our customers with the best value!

Company：ローマン・ジャパンローマン・ジャパン株式会社
Price：Other

Defect Inspection Equipment
Flaw detector

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Phased Array Flaw Detector SyncScan2

This is a lightweight and compact ultrasonic flaw detector with an easy-to-read 8.4-inch large screen, perfect for on-site inspection work.

Lightweight (4kg) and compact size, suitable for high-altitude and on-site work. It features an 8.4-inch touchscreen with a bright and easy-to-read large display, designed with an emphasis on operability and a layout that allows for one-handed operation. <Features> - Maintains the operability of SyncScan while significantly enhancing functionality High-performance model with a maximum of 128 elements and simultaneous excitation of 32 elements - Detection of welding defects and internal defects in steel materials - Flaw detection in high-damping materials and thick plates - High-performance model capable of testing with various probes and scanners - A wide range of scanners available tailored to inspection locations

Company：エフティーエス
Price：Other

Testing Equipment and Devices
Flaw detector

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Acoustic Pulse Reflection Measurement System APRIS

A flaw detection test can be performed within 10 seconds per tube. It is ideal for flaw detection testing of heat exchange tubes.

The flaw detector "APRIS," which utilizes acoustic pulse reflection, can be applied to complex internal diameters regardless of the material. Measurements can be taken within 10 to 15 seconds per tube, and no coupling is required. It is particularly effective for U-bend pipes. It is easy to operate even for beginners, and data management and report creation can be done using a PC.

Company：エフティーエス
Price：Other

Flaw detection testing
Flaw detector

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Ultrasonic Thickness Gauge / Ultrasonic Flaw Detector Smartor

Smartor is a revolutionary product that combines an ultrasonic flaw detector and an ultrasonic thickness gauge.

The ultrasonic thickness gauge and ultrasonic flaw detector 'Smartor' developed by SIUI Co., Ltd. is an ultrasonic testing device that can switch between an ultrasonic thickness gauge and an ultrasonic flaw detector through software upgrades. In previous ultrasonic flaw testing, there has been a demand for improved visibility of display images under outdoor sunlight, as well as for miniaturization of the device's dimensions and weight. 'Smartor' addresses these challenges while also functioning effectively as a thickness gauge. Despite its compact size of 198x128x52 mm (weight: 0.9 kg), the device features a 5.7-inch LCD screen for better visibility, and with the inclusion of an "outdoor mode," it allows for good waveform observation even in sunlight. 【Features】 - Rugged housing with dust and water resistance (IP66) - Lightweight and compact design (0.9 kg including battery / 198x128x52 mm) - 5.7-inch LCD display with high resolution of 640x480 pixels - Frequency filter: customizable filter settings for various applications - Easy operation with an intuitive interface - Comprehensive flaw detection capabilities - Extensive thickness measurement functions - External connection ports: encoder, mini HDMI, SD card, USB

Company：エフティーエス
Price：Other

Testing Equipment and Devices
Flaw detector

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Digital Ultrasonic Flaw Detector 'UI-27'

Standard equipped with JSNDI functionality! Improved distance measurement accuracy! For precise thickness measurement and axial force measurement, etc.

The "UI-27" is a digital ultrasonic flaw detector that consolidates the necessary technologies for portable flaw detection into a single device. It is equipped with 12 types of frequency band filters, enabling high-sensitivity detection in suitable receiving bands. Additionally, it adopts a 200MHz sampling frequency, improving distance measurement accuracy across the entire measurement range. From manual detection to automatic detection and special applications, it can be widely used. 【Features】 ■ Complies with JSNDI specifications; R-type function is standard ■ Supports SD cards (standard 2GB included) up to SDHC 32GB ■ Stepless adjustment handle ■ Improved operability with left and right key operations ■ One-touch image saving ■ Waterproof performance compliant with IP66 *For more details, please refer to the PDF document or feel free to contact us.

Company：ダイヤ電子応用
Price：Other

Flaw detection testing
Flaw detector

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Phased Array Ultrasonic Testing Device "TOPAZ16"

All inspection procedures with this one device! Multifunctional 16CH phased array ultrasonic testing equipment.

The "TOPAZ16" is a multifunctional 16-channel portable phased array ultrasonic testing device manufactured by ZETEC. It comes standard with UltraVision Touch software, which allows you to utilize many useful features on a single software platform common to all ultrasonic testing products. It can be used for various applications, including weld inspections, corrosion mapping, encoded testing using scanners, manual testing, and inspections of complex parts. 【Features】 ■ Wide range of flexible operating temperature ■ Multiple probe connections and multi-group settings ■ 10.4-inch high-resolution multi-touch display ■ Independent channels for conventional UT ■ Improved continuous operating time with hot-swappable batteries *For more details, please refer to the PDF materials or feel free to contact us.

Company：ダイヤ電子応用
Price：Other

Flaw detection testing
Flaw detector

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Phased Array Ultrasonic Flaw Detector "TOPAZ32"

Improve productivity! Portable multifunctional phased array ultrasonic testing device.

The "TOPAZ32" is a multifunctional phased array ultrasonic testing device equipped with a multi-touch screen manufactured by ZETEC. With its high-resolution, high-brightness multi-touch display, it is suitable for both indoor and outdoor use. The outdoor-only mode ensures high visibility. Additionally, the casing is a sealed type that does not allow outside air to enter, and it dissipates heat through a removable external cooling fan. The sealed casing prevents dust, moisture, or other contaminants from entering the device, making it suitable for use in various environments. 【Features】 ■ Touch screen operation available ■ High-brightness multi-touch display ■ Improved processing speed ■ Sealed type that does not allow outside air to enter ■ Various interfaces *For more details, please refer to the PDF document or feel free to contact us.

Company：ダイヤ電子応用
Price：Other

Flaw detection testing
Flaw detector

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Phased Array Ultrasonic Testing Device "TOPAZ64"

64-channel portable phased array ultrasonic testing device that integrates multiple capabilities.

The "TOPAZ64" is a 64-channel portable phased array ultrasonic testing device manufactured by ZETEC, equipped with TFM functionality. It achieves more accurate and rapid inspections with the required capabilities integrated into a single unit. It complies with the 64/128PR phased array ultrasonic testing method and supports high-resolution full matrix capture (FMC), among other features. Even when inspecting complex composite materials or thick steel welds, it provides superior coverage. 【Features】 ■ Equipped with UltraVision Touch software ■ Addresses various inspection needs and challenges ■ Powerful channel configuration ■ High resolution and enhanced performance ■ Improved defect detection probability *For more details, please refer to the PDF materials or feel free to contact us.

Company：ダイヤ電子応用
Price：Other

Flaw detection testing
Flaw detector

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Eddy Current Flaw Detector VOLUTE-1000, aect-1000T

This is an inspection device suitable for surface crack inspection of automotive metal parts and welded joints!

The "Eddy Current Testing Device VOLUTE-1000, aect-1000T" is an inspection device suitable for surface crack inspection of automotive metal parts and welds. It meets various needs according to the application. 【VOLUTE-1000】 This is a testing device for automatic flaw detection. It can be selected from 1 to 16 channels and can perform multi-frequency testing. 【aect-1000T】 This is a testing device for surface crack inspection of welds, which reduces noise from the weld bead and improves detection performance. It can be configured with dedicated software on a tablet PC and is developed for testing welds on train bogie frames. When combined with a host PC, work efficiency is improved, and the specified inspection areas can be displayed. *For more details, please refer to the PDF materials or feel free to contact us.

Company：ダイヤ電子応用
Price：Other

Industrial Endoscope
Flaw detector

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Car air conditioning piston parts ultrasonic testing device for electron beam welding.

An ultrasonic automatic flaw detection device for the electron beam welded parts of a slant plate type compressor piston.

The "Ultrasonic Testing Device for Electron Beam Welded Parts" is a device capable of automatically detecting defects in the electron beam welded parts of slant plate type compressor pistons using ultrasonic waves. It is a device for rapidly inspecting the electron beam welded parts of aluminum pistons for car air conditioners. ◎ Line Specification: Offline Automatic Operation ◎ Defect Detection: Insufficient Fusion / Misalignment / Blow Holes ◎ Processing Capacity: 6 seconds per unit ◎ Testing Method: Full Immersion Method *For more details, please refer to the PDF document or feel free to contact us.

Company：ダイヤ電子応用
Price：Other

Industrial Endoscope
Flaw detector

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Flaw detector Product List and Ranking from 63 Manufacturers, Suppliers and Companies | IPROS GMS

Flaw detector Manufacturer, Suppliers and Company Rankings

Flaw detector Product ranking