Last Updated： Aggregation Period:Apr 22, 2026～May 19, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Apr 22, 2026～May 19, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Apr 22, 2026～May 19, 2026
This ranking is based on the number of page views on our site.
451～480 item / All 678 items
Pitot tube flow velocity and flow rate measurement system (catalog)
This is an introduction to a flow velocity and flow rate measurement system that flexibly responds to on-site conditions. Automatic compensation for temperature and static pressure, automatic zero point correction, and automatic purging functions are available. The system can be configured according to your requirements.
This system combines the FV-21A type with a built-in differential pressure sensor, solenoid valve, and timer to automate the purging process.
If there is a risk of blockage in the pitot tube due to the inflow and accumulation of solid particles (such as dust) or moisture/mist, or if there is a risk of the pressure conduit being obstructed due to condensation, there is a method to perform purging to remove these substances.
It is very convenient for on-site measurements such as regular measurements of flow rate and flow volume, as well as maintenance measurements.
The FV-21A type with a built-in differential pressure sensor has been integrated into the portable box.
Accurate measurement of gas flow rate, flow volume, static pressure, atmospheric pressure, and temperature. Portable.
A portable manometer equipped with a high-precision semiconductor sensor that has the capability to measure the gas's flow rate/flow, static pressure, atmospheric pressure, and temperature with greater accuracy. 【Features】 ○ It has an RS232C output as an external output. ○ Outputs all information collected every second. ○ TYPE 1-3 - The differential pressure measurement sensor uses the same detector as our precision micro differential pressure gauge, allowing for high-precision and high-resolution measurements. - Can be used with installed equipment. - Calibration of the pressure detection part can be performed with absolute calibration using weights, ensuring reliability. ○ TYPE 4-5 - Uses a compact, high-performance semiconductor sensor for the differential pressure sensor, with a lead-acid battery and built-in. - Can be placed in the included carrying case for measurements on-site. ● For more details, please request materials or download the catalog.
FLOW value selectable! Compatible with spark ignition and diesel engines.
It is a "blow-by gas flow meter" with selectable FLOW values. It is compatible with spark ignition and diesel engines, features a 0-5V linear output (programmable), and has a display that makes it easy to identify FLOW output and configuration. It is equipped with an oil separator and a damper. It is suitable for dynamometer or vehicle engine testing, lubricant testing, and maintenance. 【Features】 ○ Compact and highly versatile ○ Selectable FLOW values ○ Compatible with spark ignition and diesel engines ○ 0-5V linear output (programmable) ○ Display that makes it easy to identify FLOW output and configuration ○ Equipped with an oil separator and damper *For more details, please contact us or refer to the catalog.
ict Company Internal Insertion Type Ultrasonic Flow Meter ULSONA ST
**Features** 1. No installation cost required When attaching to an existing ball valve, there is no need for water stoppage or construction, making installation easy. 2. Ease of adjustment and calibration The adjustment and calibration of the installed ULSONA ST are fully automated. Complicated adjustment and calibration tasks can be resolved with the push of a button by the user. 3. High precision with the latest ultrasonic technology The accuracy of transit time measurement has dramatically improved with the latest technology. It has an industry-leading flow velocity resolution of 0.001 m/sec, allowing for accurate measurement of very small flow rates. 4. Settings The setting of parameters necessary for measurement can be easily configured interactively through the LCD screen of the display unit. 5. Temperature measurement function The ULSONA ST also has a water temperature measurement function. It allows for constant temperature monitoring with an accuracy of ±1°C. 6. Comprehensive output Pulses: Forward flow pulse, reverse flow pulse, error output Analog: Flow (4-20mA), fluid temperature (DC 0-5A) Data storage: SD card (csv format) Computer communication: Can be directly connected to MODBUS monitoring systems.
Up to 60 sensors can be connected simultaneously (100 sensors during Modbus communication), allowing for remote monitoring over a wide range of 800 m to 1.6 km.
Watchlog Wireless is designed to enable pressure, temperature, and flow measurements in locations where cable wiring is not possible and power cannot be used. Data can be checked in multiple ways. There is free software for Windows tablet/PC that comes with all sensors, as well as separately sold software that has data visualization and data logging features. With the optional cloud service, you can log in from a PC anywhere in the world, set alarms, and receive notifications via email/SMS. 【Examples of Use Cases】 ■ Construction machinery (measurements can be taken while in operation) ■ Large press machines ■ Large factories such as steel mills, power plants, and paper mills Acquired Technical Standard Mark: R205-170296 Related items (Bluetooth pressure sensor/USB pressure sensor) https://www.watchlog-bluetooth.jp *For more details, please refer to the PDF document or feel free to contact us.
Used for liquids such as water, light oil, solvents, low-viscosity chemical agents, and mineral oils (up to 46 cSt). Custom solutions are also available for high temperature, high pressure, screw-in, flange, and other applications.
Based on the principles of turbines that have been proven in the past, fluid acts on the inclined surfaces of precision turbine blades, causing them to rotate. The movement at the tips of each blade is detected by sensors built into the main body of the measuring instrument, converted into pulse signals, and then the frequency is converted into flow rate. With a rated pressure of 3.5 MPa (maximum 34.5 MPa optional) and a rated temperature of 110°C (optional 232°C), it can accommodate many industries. We offer 12 sizes (0.7 L/min to 18,000 L/min) with screw-type (straight G thread [male thread] and tapered R thread [female thread] up to 40 MPa) or JIS 10K-RF flange connections, allowing us to meet various customer requirements. You can choose from three methods: 1] millivolt sine wave, 2] rectangular wave (square wave), or 3] 4-20 mA analog signal.
The screw meter OME is a helical gear type volumetric flow meter, lightweight and compact, with a wide measurement range and high precision.
OME is a helical gear type volumetric flow meter, a screw meter. It has an aluminum body, featuring a lightweight and compact design. The measurement accuracy is ±0.3% RS (1:150), providing high precision. The 1:10 range (from 1/10 of F.S.) has linearity of ±0.1%. It also supports calibration in accordance with ISO/IEC 17025 ILAC MRA (JCSS mutual recognition).
Conduct safety valve and pressure gauge inspections in accordance with the High-Pressure Gas Safety Act.
We will issue an inspection report along with a pressure gauge certificate with traceability as the standard.
High-pressure gas safety association certified product! It purifies and deodorizes high-pressure gas, preventing foreign matter contamination.
The maintenance of the cleaning agent is an economical and simple method that only involves replacing the cleaning agent. Depending on the application, the optimal cleaning agent can be selected from options such as activated carbon, activated alumina, and synthetic zeolite. You can leave the installation, piping work, and high-pressure gas application to us.
The KRAL screw meter OMG + BEV13 is a high-precision flow meter that supports a wide temperature range from low to high temperatures.
The KRAL screw meter OMG series, which can withstand high temperatures of up to 200°C, is used for performance and durability testing of automotive parts. Particularly at high temperatures, the viscosity of oil decreases, leading to significant leaks with conventional gear meters, raising concerns about accuracy at low viscosity. This is because conventional gear meters conduct flow tests at the time of shipment at viscosities of 20 to 30 mm²/s. Volumetric flow meters struggle with low-viscosity fluids and require a certain level of viscosity to ensure accuracy. The viscosity of the test fluid serves as a guideline. It is widely known that ensuring measurement accuracy and linearity becomes very difficult when the viscosity is lower than the test viscosity at shipment, which poses a challenge. Therefore, many users implement measures such as linearization corrections, especially at low viscosity and low flow rates. The KRAL screw meter is calibrated at 5 mm²/s, equivalent to diesel oil, and can be used at high temperatures without correction. KRAL is a flow meter manufacturer capable of performing ISO/IEC 17025 calibrations (ILAC MRA certification). It is also used as a standard instrument (master meter) for flow meter calibration.
The accuracy is an impressive ±0.1% R.S. High precision at a low price! The high-precision flow meter OMP, with its wide temperature range, can also be used as a reference instrument or secondary standard!
The screw meter volumetric flow meter "OMP Series" is a new series that has achieved a lower price based on the "OMG Series." Its specifications are fundamentally equivalent to those of the "OMG Series," but it has limited model sizes, temperature ranges, and pressure ranges. However, the measurement accuracy is the same as the "OMG Series," with a very high precision of ±0.1RS, making it suitable for use as a reference instrument or secondary standard instrument. The compatible fluids include not only high-viscosity liquids such as adhesives, sealants, PVC, and polyols, but also low-viscosity liquids such as gasoline, light oil, and kerosene. 【Do you have any of these concerns?】 - The data during high-temperature tests is poor, making accurate measurement impossible. - They break down quickly within 3 to 5 years due to high temperatures, necessitating replacement. - I want to measure high-viscosity fluids like grease, adhesives, and sealants. *For more details, please download the catalog or contact us directly.
Accuracy is ±0.1% R.S.! An economy-type flow meter that achieves high precision at a low price!
OME is a low-pressure model of the economy type. To achieve cost reduction and a low price, the main body material is aluminum, and the detection method and number of parts have been reduced. Although the output pulse has decreased, the internal spiral gear is the same as that used in OMG, maintaining high precision of ±0.1% R.S. A new amplifier box has been added, integrating a 2-phase 90° phase difference pulse (PNP) and a temperature sensor Pt100Ω. With 4-fold input, calculations can be performed with 1/4 pulse resolution, simplifying wiring compared to conventional types. It is lightweight and compact, making it ideal for measuring fuel consumption in various engines, and is also used for performance testing of fuel pumps. It is designed for intrinsically safe explosion-proof use as well. ≪Features≫ Lightweight and compact aluminum body Ideal for fuel consumption measurement High precision (±0.2% R.S.) at a low price ≪Materials≫ Main body: Aluminum (3.0615) Spindle: Hardened steel (1.0737) Bearing: Steel/Stainless steel O-ring: Viton, EPDM
High-capacity compressor with a maximum operating pressure of 29.4 MPa!
Common pressure: 29.4 MPa Water-cooled 4-stage compression Maximum discharge capacity: 2.74 m³/min
Low-viscosity liquids such as gasoline and diesel fuel can also be measured with high precision!
The "OMH Series" is a screw-type volumetric flow meter compatible with a maximum pressure of 42 MPa. It is also referred to as a screw meter or helical gear meter. The movement of the rotating screw, driven by the flow of fluid, is detected by a pickup sensor and output as a pulse signal. Thanks to the precisely machined screw, it is hardly affected by the changes in viscosity due to temperature variations of the fluid, allowing for high-precision measurements across a wide range. 【Features】 ■ Supports large flow rates (Max. 3,000 L/min) ■ High-pressure compatible (Max. 42 MPa) ■ Wide measurement range (up to 1:150) ■ Wide temperature range (-20 to +200℃) ■ High precision (±0.1% R.S.) ■ Low pressure loss and low noise design *For more details, please refer to the PDF document or feel free to contact us.
No worries about wear or clogging since there are no moving parts! The MIM series electromagnetic flow meter features a high-performance, compact design that allows for simultaneous temperature measurement with low pressure loss.
Water Flow Meter MIM Series 【Features】 - Electromagnetic flow meter using Faraday's law of electromagnetic induction - No moving parts in the flow path - Low pressure loss - No concerns about wear or clogging - Display can be rotated 90° according to installation position - Can be installed in both horizontal and vertical positions - Simultaneous temperature measurement - High-temperature version available (Max 140°C) - Can measure fluids with conductivity of 20μS/cm or higher 【Main Applicable Fluids】 - Water, antifreeze, LLC, ethylene glycol, various aqueous solutions, and other liquids with conductivity of 20μS/cm or higher *If you send a sample liquid, we will confirm the measurement feasibility free of charge. 【Measurement Accuracy】 ±0.8% RS (for water at 15–30°C) 【Reproducibility】 ±0.2% 【Fluid Temperature】 -20 to +70°C (Remote type: -40 to +140°C) 【Operating Pressure】 Max 1.6MPa 【Protection Rating】 IP67 【Power Supply Voltage】 19–30VDC, Power Consumption Max 200mA
Using a flow meter allows for measurement without the need for an oil jug!
The "M101" is a meter for measuring oil flow. It is used by attaching it to the discharge of various hand bucket oil pumps, oil pumps for pails, reciprocating air drum pumps, and the ends of hoses. By using the flow meter, measurement can be done without using an oil jug. 【Features】 ■ An analog meter for measuring oil flow ■ Used by attaching it to the discharge of various hand bucket oil pumps, oil pumps for pails, etc. ■ Measurement is possible without using an oil jug when using the flow meter *For more details, please refer to the PDF document or feel free to contact us.
Use it by attaching it to the oil pump outlet, hose end, or oil gun!
The "M201" is a digital meter that measures oil flow. It is used by attaching it to the oil pump discharge of various hand bucket oil pumps, oil pumps for pails, reciprocating air drum pumps, etc., as well as to the ends of hoses and oil guns. By using the flow meter, measurement can be done without using an oil jug. 【Features】 ■ Digital meter for measuring oil flow ■ Can be used by attaching to the oil pump discharge of various hand bucket oil pumps and oil pumps for pails, etc. ■ Measurement is possible without using an oil jug when using the flow meter *For more details, please refer to the PDF document or feel free to contact us.
It is a portable liquid flow meter equipped with a large LCD screen that supports easy-to-use Japanese display.
This is a portable liquid flow meter equipped with a large LCD screen that supports easy-to-use Japanese display. It utilizes a correlation reception method to accommodate fluids that have been difficult to measure, such as two-phase flows containing solids and bubbles, as well as hydrocarbon liquids. It also features a comprehensive self-diagnostic function that helps improve the efficiency of measurement tasks. Additionally, flow data can be transferred to a computer for editing in spreadsheet software. (Compatible with Windows XP and earlier.) For more details, please contact us or download the catalog.
Measurement possible without cutting pipes for compressed air, ultra-high purity gases, etc.
The portable ultrasonic gas flow meter PT878GC-01 can measure the flow of almost any gas in the industrial sector, from compressed air to ultra-pure gases. Its ultrasonic characteristics provide high accuracy with zero pressure loss, and its wide rangeability makes it applicable in various fields, such as energy-saving diagnostics. Since it operates without contact with the gas and has no moving or wearing parts, and theoretically has no drift in measurement values, it is extremely effective for measuring gases that are sensitive to contamination or corrosive gases, as well as for reducing running costs. For more details, please contact us.
Fluid with bubbles and solid particles can also be measured! Clamp-on type portable flow meter.
The Portable Flow Meter G601 CA Energy is an easy-to-set-up clamp-on type ultrasonic flow meter compatible with various types of piping. It can measure fluids with a large amount of bubbles or solid particles mixed in. Additionally, it can also perform thermal flow measurement. Flow measurement, wide measurement range, high accuracy, high zero-point stability, and compatibility with high temperatures. 【Features】 ■ 2-channel specification, multiple inputs and outputs, data logger, serial interface. Body protection rating: IP65 ■ Continuous operation for up to approximately 14 hours with a lithium-ion battery. Easy setup within 5 minutes with automatic transducer recognition. ■ Pipe inner diameter: 50 to 550 mm ■ Measurement temperature: -40 to +130℃ ■ Sturdy carrying case with protection rating: IP67 *For more details, please contact us.
Easy installation with fixed jigs! A wide selection of sensors suitable for various applications is available!
The "PT900" is a new type of portable clamp-on flow meter that utilizes a user interface through applications installed on Android tablets. It can be easily installed with a newly designed fixed fixture and is capable of measuring flow velocity, volumetric flow rate, mass flow rate, cumulative flow, and thermal flow. Additionally, it is versatile, easy to install, intuitive to use, and provides reliable measurements even in harsh applications. 【Features】 ■ A wide selection of sensors suitable for almost any application ■ Transmitter compatible with Bluetooth wireless tablets ■ Easy programming with the tablet's touchscreen and a multilingual user interface, including Japanese ■ High-speed response and high-precision transmitter with an indicator for abnormal conditions using green/red lights and a data recording capacity of 4GB ■ Equipped with an easy-to-install clamp-on mounting fixture *For more details, please refer to the PDF document or feel free to contact us.
The operation consists of just three simple steps that anyone can follow!
This flowmeter varies depending on the size of the pipe, making equipment selection challenging. However, because it is a Doppler type, you can start measuring any target with just this one device. *Note: It is not suitable for measuring completely pure substances like clean water. Additionally, it is palm-sized and easy to carry, taking up minimal storage space. The usage method is straightforward, making it very user-friendly. *For more details, please refer to the catalog available for download below under "PDF Download." You can also request a quote through "Contact Us." Feel free to reach out.
The patented helical rotor demonstrates numerous excellent characteristics! A flow meter with high precision and high durability.
The "robe-type flow meter" features a unique helical rotor that demonstrates excellent characteristics, allowing for high-precision measurement across a wide flow range. It continuously utilizes liquid pressure to measure smoothly at a constant speed. This unique technology achieves high-precision measurement, outstanding durability, and a compact shape. We offer various types and sizes to suit your applications. 【Features】 ■ High-precision measurement ■ Outstanding durability ■ Compact shape due to high-speed measurement *For more details, please refer to the PDF document or feel free to contact us.
Simple measurement by just installing the sensor! A type of open channel flow meter that measures flow velocity distribution and water level!
The "MS II Series" is a surface velocity flow meter that can measure with high precision from wastewater to clean water, thanks to its phase coherence function. With measurement control features based on signal quality, the portable flow meter has become even more energy-efficient. We have added the ABM ultrasonic water level sensor to our lineup for measuring industrial wastewater. 【Features】 ■ Open channel flow meter that measures flow velocity distribution and water level ■ Easy measurement by simply attaching the sensor ■ High precision measurement from wastewater to clean water due to the phase coherence function ■ Further energy efficiency of the portable flow meter *For more details, please refer to the PDF document or feel free to contact us.
Significantly improved reaction speed and resolution! Measurement is possible regardless of the shape of pipes or waterways, even with sediment present!
This catalog introduces area-velocity flow meters. It features the area-velocity flow meter "MS-BASIC," as well as the portable area-velocity flow meter "MS-P II" and the area-velocity flow transmitter "MS-FT." Please use this for product selection. 【Featured Products】 ■ Area-Velocity Flow Meter [MS-BASIC] ■ High-Performance Area-Velocity Flow Meter [MS-PREMIER] ■ Portable Area-Velocity Flow Meter [MS-P II] ■ Ultrasonic Flow Velocity Transmitter [MS-VT] ■ Area-Velocity Flow Transmitter [MS-FT] ■ Flow Velocity Detector ■ Water Level Transmitter *For more details, please refer to the PDF document or feel free to contact us.
You can easily see the approximate flow rate of water at a glance!
The MKT type WATER SIGNAL (for water use) is a flow control device that allows for approximate flow rate confirmation by observing the relationship between the ball (or float) and the displayed red line, thanks to its use of a transparent tapered tube. Additionally, since it uses a spring internally, it can be installed in various orientations, including upward, downward, and sideways. 【Product Lineup】 ■MKT25-1TW ■MKT25-2TW ■MKT25-3TW ■MKT30-2TW ■MKT30-3TW ■MKT30-4TW, etc. *For more details, please download the PDF or feel free to contact us.
Easy installation on supply and transport machines! Can be used for flow measurement and control from fine powders to bulk materials and slurries.
We handle the "Impact Line Flow Meter" for powders, granules, and slurries. The "Impact Line Flow Meter" can be easily installed in feeders, conveyors, grinders, classifiers, and is used for flow measurement and control from fine powders to bulk solids and slurries. We offer a range of transmitters including the "ILE series," "ILC series," and "ILS series." 【Features】 ■ Easily installed in feeders, conveyors, grinders, classifiers, etc. ■ Used for flow measurement and control from fine powders to bulk solids and slurries ■ A wide variety of transmitters available *For more details, please refer to the PDF document or feel free to contact us.
Equipped with two scale hoppers! It serves as a high-precision measuring and control flow meter for processes.
The "Stopless Flow Meter" is a device used to measure the weight of powders and granules. It has two measuring tanks, allowing for continuous feeding of materials. It is easy to install and maintain. As a high-precision measuring and control flow meter for processes, it is widely used in industries such as milling, food, and chemicals. 【Features】 ■ Wide range of measured materials and measurement ranges ■ High precision measurement (from 5/1000 to 1/1000) ■ Completely sealed structure ■ Explosion-proof and sanitary structures are also possible ■ Easy to install and maintain *For more details, please refer to the PDF materials or feel free to contact us.
