We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Holder.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Holder×ムサシノ電子 - List of Manufacturers, Suppliers, Companies and Products

Holder Product List

1～11 item / All 11 items

Displayed results
Precision grinding sample holder

Precision grinding sample holder

We offer a wide range of products, including vacuum chuck holders and adhesive holders!

When performing automatic polishing using a precision grinding device, the selection of the sample holder is very important. Considering the shape of the sample and the target finishing accuracy, we will propose suitable sample holders. For samples with special shapes or requiring higher precision, we also accept requests for custom sample holders. 【Product Lineup】 <Holder with Polishing Amount Adjustment Mechanism> ■ Vacuum Chuck Holder ■ High-Precision Holder ■ TEM Holder ■ Thickness Adjustment Holder *For more details, please refer to the PDF materials or feel free to contact us.

  • Wafer processing/polishing equipment
  • Other processing machines
  • Other machine elements

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
1-piece adhesive holder

1-piece adhesive holder

Adjustable grinding load! Precisely manufactured fitting tolerances for the guide ring and guide shaft.

The "Single Attachment Holder" fixes the sample to the attachment plate using hot wax or double-sided adhesive sheets, and inserts the attachment plate with the adhered sample into the guide ring connected to the guide axis for polishing. This holder is manufactured with high precision to ensure the fit tolerance between the guide ring and the guide axis. As the guide axis (sample) descends parallel to the inner wall of the guide ring onto the polishing plate, it is designed to be polished at a right angle to the inner wall of the guide ring. 【List of Accessories】 ■ Attachment Holder ■ Guide Ring ■ Weight *For more details, please refer to the PDF document or feel free to contact us.

  • Other machine elements
  • Processing Jig

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Embedding sample holder

Embedding sample holder

It is possible to add any weight! Polishing can also be done with the pantograph-type sample holding unit!

The "Embedding Sample Holder" allows for the chucking of 3 to 6 samples embedded in resin within the holder, which is then inserted into a rotating auxiliary ring for polishing. A brass rod can be attached to the center of the holder, allowing for the addition of any desired weight. Additionally, by attaching a bearing instead of the brass rod, polishing can also be performed using a pantograph-type sample holding unit. 【List of Embedding Holder Accessories】 ■ Embedding Holder ■ Height Adjustment Ring ■ Rotating Auxiliary Ring ■ Embedded Samples *For more details, please refer to the PDF document or feel free to contact us.

  • Other machine elements
  • Processing Jig

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Guide ring type clamping holder

Guide ring type clamping holder

It is possible to polish the end face while securely clamping the sample in a vice! Designed with strict tolerances.

We would like to introduce our "Guide Ring Type Clamping Holder." This product allows for the polishing of the end face while the sample is securely clamped in a vice. Additionally, we manufacture the fit tolerance between the guide ring and the guide shaft with high precision. The guide shaft (sample) descends parallel to the inner wall of the guide ring onto the polishing disk, ensuring that it is polished perpendicularly and accurately against the inner wall of the guide ring. 【List of Accessories】 ■ Clamping Holder (W58mm × D8mm) ■ Guide Shaft ■ Guide Ring ■ Weight Rod ■ Gauge Block 1mm *For more details, please refer to the PDF document or feel free to contact us.

  • Other machine elements
  • Processing Jig

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Simple 2-axis goniometer sample holder

Simple 2-axis goniometer sample holder

Polishing work with corrected two-axis orientation is possible! Achieving high parallelism accuracy in polishing work.

We would like to introduce our "Simple 2-Axis Goniometer Sample Holder." By using an attachment that can be mounted on the rail of an X-ray Laue camera, it is possible to perform polishing work while correcting the orientation in two axes. By utilizing guide rings, we have achieved high parallelism accuracy in polishing operations. Please feel free to contact us if you have any inquiries. Examples of materials we have experience processing: Semiconductor materials (silicon, germanium, silicon carbide, strontium silicate, gallium arsenide, indium gallium arsenide, indium phosphide, indium gallium zinc oxide, gallium nitride, gallium oxide, cadmium telluride, etc.) Optical materials (quartz glass, sapphire, fluorite lenses, spinel, phosphate glass, lithium borate, acrylic resin, CLBO, YiG, GGG, etc.) Ceramic materials (alumina, zirconia, silicon nitride, ferrite, etc.) Metal materials (iron and steel materials, stainless steel, copper, gold, silver, platinum, aluminum, titanium, molybdenum, etc.) [Internal Structure of the Holder] ■ 2-Axis Goniometer ■ Outer Wall of the Holder ■ Adhesive Plate *For more details, please refer to the PDF document or feel free to contact us.

  • Other machine elements
  • Processing Jig

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Sample holder "Hand Polishing Dedicated Holder"

Sample holder "Hand Polishing Dedicated Holder"

Setting of grinding amount is possible! Sample holder designed in a shape that is easy to hold by hand.

The "Hand Polishing Dedicated Holder" is a sample holder that can be used with the hand polishing device "MM-200." It allows for the setting of polishing amounts, enabling controlled processing during hand polishing. We also offer "Shift Wax," "Futarik Glue," and "Waterproof Sandpaper," among other items. 【Features】 ■ Usable with the hand polishing device "MM-200" ■ Adjustable polishing amount ■ Enables controlled processing during hand polishing ■ Designed for easy handling by hand *For more details, please refer to the PDF document or feel free to contact us.

  • Other machine elements

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Sample holder "Vacuum chuck type holder"

Sample holder "Vacuum chuck type holder"

The stroke width is 5mm! A sample holder with a backlash-free stopper is included.

The "Vacuum Chuck Holder" is a sample holder that allows for automatic precision grinding up to a set amount of grinding. The grinding amount can be set with a precision of ±3μm or less (with a minimum reading of 1μm dial gauge included), and the stroke width is 5mm. It is suitable for sample preparation for transmission electron microscopy and for thinning of compound semiconductors such as Si wafers and InP. 【Features】 ■ Ideal for sample preparation for transmission electron microscopy ■ Capable of automatic precision grinding up to the set amount ■ Grinding amount can be set with a precision of ±3μm or less ■ Comes with a zero-backlash stopper ■ Stroke width is 5mm *For more details, please refer to the PDF document or feel free to contact us.

  • Other machine elements

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Sample Holder "High Precision Holder"

Sample Holder "High Precision Holder"

Equipped with a backlash-free stopper! The setting accuracy for the grinding amount can be adjusted to within ±3μm.

The "High Precision Holder" is a sample holder capable of automatic polishing based on a set polishing amount. The accuracy of the polishing amount setting can be adjusted to within ±3μm, and it is possible to achieve parallelism accuracy within ±1μm after polishing. Additionally, there is a "Load Reduction Type" equipped with a spring. We also offer an optional "Two-Axis Goniometer for Fine Tilt Adjustment." 【Features】 ■ Capable of automatic polishing based on the set polishing amount ■ Polishing amount setting accuracy adjustable to within ±3μm ■ Achieves parallelism accuracy within ±1μm after polishing ■ Equipped with a backlash-free stopper ■ Stroke width is 5mm *For more details, please refer to the PDF document or feel free to contact us.

  • Other machine elements

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Sample holder "TEM holder"

Sample holder "TEM holder"

Can be used for samples embedded in resin! A sample holder that enables automatic precision polishing to the desired amount of polishing.

The "TEM Holder" is a polishing tool suitable for sample preparation for transmission electron microscopy (TEM). It allows for the setting of the polishing amount and can automatically perform the necessary polishing work. It can also be used for polishing resin-embedded samples and cylindrical samples. The precision of the polishing amount setting is adjustable to within ±5μm (with a dial gauge that has a minimum reading of 1μm). 【Features】 ■ Allows for the setting of the polishing amount and can automatically perform the necessary polishing work ■ Usable for polishing resin-embedded samples and cylindrical samples ■ The precision of the polishing amount setting is adjustable to within ±5μm ■ Can achieve parallelism accuracy of within ±2μm after polishing ■ A no-load type using springs is also available *For more details, please refer to the PDF document or feel free to contact us.

  • Other machine elements

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
1-piece embedded sample holder

1-piece embedded sample holder

Strictly designed tolerances! Precisely polished at a right angle to the inner wall surface of the guide ring.

The "1-piece embedded sample holder" is manufactured with precise fit tolerances between the guide ring and the holder. The sample, embedded in resin, is chucked within the holder and inserted into the guide ring for polishing. As the holder (sample) descends parallel to the inner wall of the guide ring onto the polishing plate, it is polished with high precision at a right angle to the inner wall of the guide ring. 【List of Accessories】 ■ Embedded sample holder ■ Brass rod ■ Guide ring ■ Weight ■ Height adjustment ring (2mm) *For more details, please refer to the PDF document or feel free to contact us.

  • Other machine elements
  • Processing Jig

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Instruction Manual] TEM Holder

[Instruction Manual] TEM Holder

Ideal for sample preparation for transmission electron microscopy (TEM)! The polishing amount can be set in 1μm increments using a dial gauge.

This document is the instruction manual for the "TEM Holder," which is suitable for sample preparation for transmission electron microscopy. It includes a "List of Accessories," as well as information on the "Structure of the TEM Holder" and the "Mechanism for Controlling Grinding Amount." Additionally, there are notes on "Usage and Cleaning," so please take a moment to read through it. 【Contents (partial)】 ■ List of Accessories ■ Structure of the TEM Holder ■ Mechanism for Controlling Grinding Amount ■ Sample Attachment (Fixing with Thermal Wax) ■ Sample Attachment (Fixing with Double-Sided Adhesive Sheets) *For more details, please refer to the PDF document or feel free to contact us.

  • Other machine elements
  • Processing Jig

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Holder

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.