Last Updated： Aggregation Period:Jan 14, 2026～Feb 10, 2026
This ranking is based on the number of page views on our site.
1～30 item / All 78 items
High-efficiency deep hole machining drill
- Non-step processing is possible for deep holes ranging from 35D to 50D. (Standard products are available up to 30D.) - High efficiency and long lifespan in both wet and MQL conditions. - The cutting edge shape with low cutting resistance allows for long lifespan in deep hole machining of stainless steel.
This is a two-flute end mill with a 35-degree twist and a pinned tip specification.
■ 2-flute, 35-degree twist, pin end mill specification ■ Blade length ranges from 2.5D to 3D medium length ■ Capable of handling a wide range from general steel to difficult-to-cut materials due to high-quality ultra-fine particle carbide and high heat-resistant ALCrN-based coating *For more details, please download the PDF or feel free to contact us.
It is a 4-flute radius end mill with a 35/38 degree twist.
■4-blade, 35/38 degree twisted radius end mill ■Outstanding vibration resistance due to uneven division and uneven lead ■Wide compatibility from general steel to difficult-to-machine materials thanks to high-quality ultra-fine particle carbide and high heat-resistant ALCrN-based coating *For more details, please download the PDF or feel free to contact us.*
It is a long-end mill type with 4 blades, a twist of 35/38 degrees, and a blade length of 4D to 5D.
■4-blade, 35/38 degree twist, long blade type with a blade length of 4D to 5D ■Outstanding vibration resistance due to uneven division and uneven lead ■Wide compatibility from general steel to difficult-to-machine materials, thanks to high-quality ultra-fine particle carbide and high heat-resistant ALCrN coating *For more details, please download the PDF or feel free to contact us.*
This end mill demonstrates high performance on hard materials with a hardness of HRC35 or higher, as well as difficult-to-cut materials such as stainless steel and Inconel.
■ Latest ultra-fine particle super hard ■ Improved wear resistance with high-temperature resistant TiSi-based coating ■ Excellent vibration damping performance with uneven division and uneven lead (39/42 degrees) ■ High rigidity with a shape that increases core thickness towards the shank ■ High performance on harder work materials with HRC 35 or higher, such as stainless steel and Inconel, which are difficult to machine *For more details, please download the PDF or feel free to contact us.*
Adopting an irregular core thickness to improve rigidity. Capable of drilling with a four-blade carbide design. Vibration is also reduced.
The "Fujin Mill" and "Raijin Mill" are end mills that contribute to high-efficiency machining with irregular core thickness (tapered core thickness) for groove processing and side processing. By adopting uneven division and uneven lead, they suppress chatter, and their unique bottom blade shape allows for drilling with four cutting edges. We also offer types with hybrid coatings suitable for machining SUS304 and Ti-6Al-4V workpieces for each product. 【Features】 ■ Increased tool rigidity due to irregular core thickness, preventing machining surface collapse ■ Sizes: φ1 to 20 (Fujin Mill), φ1 to 25 (Raijin Mill) ■ Blade diameter tolerance: 0 to -0.02 ■ Compatible with regrinding *For more details, please refer to the documentation. Feel free to contact us with any inquiries.
Improving machining surfaces and achieving long tool life! Introducing special end mills for difficult-to-machine materials along with processing examples.
"TWIN BEAT" is a special end mill for difficult-to-machine materials with AN coating. It is a finishing product developed for difficult-to-machine materials such as precipitation-hardened stainless steel and titanium alloys. By suppressing vibration, it has achieved improved machining surfaces and longer tool life. 【Machining Example】 ■Tool Used: TWBT-3 ■Material Being Machined: Ti 6AI 4V ■Machining Details: Side finishing ■Cutting Conditions ・Rotational Speed: 700 min-1 ・Cutting Speed: V=35 m/min ・Feed Rate: 210 mm/min ・Depth of Cut: ae=0.2 mm ap=40 mm *For more details, please refer to the PDF document or feel free to contact us.
Recommended for NC automatic lathes and complex machining! Easy-to-use low-cost type.
The "Eco End Mill" is an end mill that boasts high hardness with NC25B (TiAIN coating). It is compatible with a wide range of materials such as steel and stainless steel, and we offer both 2-flute and 4-flute options at an affordable price. Custom sizes and shapes can also be manufactured upon request. In addition, we have a lineup of high-performance end mills called the "Short End Mill" series, which provides stable quality. 【Features (Eco End Mill)】 ■ Easy-to-use low-cost type ■ High hardness with NC25B (TiAIN coating) ■ Recommended for NC automatic lathes and complex machining ■ Available in both 2-flute and 4-flute options at an affordable price ■ Usable for a wide range of materials from non-ferrous metals to cast iron *For more details, please refer to the PDF document or feel free to contact us.
A wide variety of options available as ultra-hard end mills!
We handle "Carbide 3-Flute End Mills with 45° Helix" and "Carbide 2-Flute End Mills with 35° Helix," among other "Square End Mills." Additionally, we offer "SUSPRO-L," which suppresses chatter and achieves high-efficiency machining through unequal lead and unequal pitch design, as well as "SHXPRO," which is suitable for finishing operations on general steel to high-hardness materials (up to HRC65). 【Product Lineup】 ■ Carbide 3-Flute End Mill with 45° Helix ZPRO ■ Carbide 4-Flute Unequal Pitch and Unequal Lead End Mill 3D Type SUSPRO-L ■ Carbide 4-Flute Unequal Pitch and Unequal Lead End Mill SUSPRO ■ Carbide 6-Flute End Mill with 45° Helix SHXPRO ■ Carbide 4-Flute End Mill with C Face and 45° Helix SEZPRO, etc. *For more details, please download the PDF or contact us.
Belt-type forced running device for mice and rats
The stimulation grid is available separately for mice and rats. There is a wide range of series lineups, allowing you to choose the appropriate type based on experimental conditions and installation space. There are also types with a wider living space. It can be combined with shockless parts that do not use position sensors or electronic stimulation. 【Features】 ■ Speed, time, and intensity of electrical stimulation can be set and checked with the controller ■ A wide range of series lineups ■ The grid section can be easily removed and washed ■ A variety of types can be selected according to experimental conditions and installation space ■ Adjustable angles, allowing for downhill running *For more details, please refer to the PDF materials or feel free to contact us.
Prevent processing surface collapse! With a unique bottom blade shape, drilling processing with four blades is possible.
We would like to introduce our ultra-hard 4-flute vibration-damping end mills, 'FUZINE' and 'RYZINE'. By adopting a variable core thickness, we achieve high-efficiency machining for groove and side processing. The use of unequal division and unequal lead reduces chatter and allows for stable machining. Additionally, the "HIBRID coating" excels in wear resistance and is suitable for workpieces such as SUS304. 【Features】 ■ High-efficiency machining for groove and side processing achieved through variable core thickness ■ Reduced chatter and stable machining possible with unequal division and unequal lead ■ Unique bottom blade shape allows for drilling with 4 flutes ■ "HIBRID coating" offers excellent wear resistance, making it ideal for workpieces like SUS304 ■ Tool rigidity improved by taper core thickness, which changes from the cutting edge to the shank ■ Blade diameter tolerance: 0 to -0.02 *For more details, please refer to the PDF document or feel free to contact us.
Ideal for resin processing with a sharp blade tip!
To reduce cutting heat during resin processing, we have adopted sharper cutting edges than conventional end mills. Additionally, we have ensured good chip evacuation with a large chip pocket. We are fully responsive to the needs of resin processing.
This is the end mill series of Miyamae Kiko's original products.
Miyamae Kiko's original end mills are available for customers from the MS222 series of carbide 2-flute end mills and the MS425 series of carbide 4-flute end mills. 【Features】 ■ The MS222 series is a general-purpose 35° end mill. ■ The MS425 series suppresses chatter vibrations, enabling efficient machining. ■ Various outer diameter sizes are available for selection. *For more details, please download the PDF or feel free to contact us.
![[Campaign] 5-Sided Pyramid Chisel Drill 'Pentagon'](https://image.mono.ipros.com/public/product/image/69d/2001526088/IPROS16693018332382938422.png?w=280&h=280)
From March 13, 2025, to June 13, 2025! Improvement of hole position accuracy in stainless steel and cast processing.
"Pentagon" has won the Impact Naming Award at the 35th Naming Awards by Nikkan Kogyo Shimbun. In celebration of this, we will offer a 15% discount on the sales price for orders of this product placed during the campaign period. Here are the details of the campaign: 【Campaign Details】 ■ Period: March 13, 2025 – June 13, 2025 ■ Content: 15% off the sales price ■ Eligible Product: Pentagon *For more details, please check the related link or feel free to contact us.
A mini vice developed by the manufacturer of "Robot Town Minamisoma" has arrived!
● A serious mini vice developed by professionals in precision vice manufacturing for hobby use. ● Convenient for holding and fixing small workpieces, as well as for soldering and gluing! ● Equipped with a magnet at the bottom for secure fixing. Improves work efficiency! ● Available in aluminum and plastic types. Choose according to your needs. *Please feel free to contact us for more details.*
A mini vice developed by the manufacturer of "Robot Town Minamisoma" has arrived!
● A serious mini vice developed by professionals in precision vice manufacturing for hobby use. ● Convenient for holding and fixing small workpieces, as well as for soldering and gluing! ● Equipped with a magnet at the bottom for secure fixing. Improves work efficiency! ● Available in aluminum and resin types. Choose according to your needs. *Please feel free to contact us for more details.*
Short blade length and overall length, perfect for use on automatic lathes!
The shank diameter for a blade diameter of φ10 or less is φ6 and can be used with an ER11 collet. The new Vc coating offers significantly higher hardness (approximately 3000 HV) and oxidation onset temperature (approximately 800°C) compared to the conventional V1 (TiAlN coating), resulting in even longer tool life. 【Features】 ■ AlTiN coating ■ Ultra-fine particle carbide ■ Groove machining ■ Side machining ■ Helix angle of 35° ■ Gash land *For more details, please refer to the PDF document or feel free to contact us.
High-performance square end mill compatible with difficult-to-machine materials such as stainless steel and Inconel!
We are conducting the "Giga SUS Fighter Campaign." We have a lineup of 13 types of the target product "SUS Fighter SJDM440." We are offering a special price for orders of three units. 【Campaign Overview】 ■ Duration: Orders received from April 2024 to the end of June 2024 ■ Target Product: SJDM440 SUS Fighter *For more details, please refer to the PDF document or feel free to contact us.
With stopper ring! A wide variety of sizes of ultra-hard SG ball end mills.
The "SG Ball End Mill" is a product handled by BBK Company, which manufactures precision cutting carbide tools, precision molds, and press parts. The material is carbide, which lasts about 7 to 10 times longer than high-speed steel (HSS). It comes with a stopper ring, but orders without the ring can also be accepted. Additionally, we can accommodate sizes that meet your needs, so please feel free to consult us. 【Features】 ■ Carbide ■ Lasts about 7 to 10 times longer than HSS ■ Available in 2-flute or 3-flute (varies by size) ■ Comes with a stopper ring ＝＝＝＝＝ For more details, please contact us＝＝＝＝＝ TEL 044-811-0065 FAX 044-811-0925 Contact: Kawaguchi, Kamimoto
Added 35 items of free neck type! Machining is now possible in deeper areas.
The "Epoch Turbo Series" is a high-efficiency corner R end mill that responds to the demand for shorter delivery times for molds. It provides strong support for discharge-free direct engraving processing. The blade profile cross-section adopts an oval shape that has proven effective with the Epoch Turbo Mill. Additionally, there is a "Free Neck Type" that accommodates deep processing for large die-cast molds, casting molds, and general plastic molds. 【Features】 ■ Oval effect ■ High rigidity blade shape (low speed, high feed) ■ Composite neck shape ■ ATH coating *For more details, please download the PDF or feel free to contact us.
The difference can be understood through groove processing! The fact that burrs are less likely to occur in groove processing is a sign of stable processing.
The "AE-VMSS/VMS" is a light angle type ultra-hard vibration-resistant end mill with an innovative cutting edge designed to machine right angle corners. Poor chip evacuation and high cutting resistance can lead to unstable machining, making it easier for burrs to form. Additionally, we also offer the "AE-VML," which focuses on high-efficiency side cutting, and the "AE-VMFE," designed for vertical wall applications. 【Features】 ■ Positive rake angle ■ High rigidity ■ New groove form *For more details, please download the PDF or feel free to contact us.
A new model, MM500, has been added to the mixer mill, which is compact in size and widely used for sample preparation of small quantities.
The new design of the grinding jar (container) and the adoption of an upgraded drive have improved airtightness and grinding capability, enabling ultra-fine grinding (<0.1 μm) comparable to a planetary ball mill, grinding under gas atmosphere, and long durations for mechanical alloying (MA) and mechanochemical processes. Additionally, the jar capacity has increased to a maximum of 125ml. It also supports freeze grinding, which has gained attention in recent years. 【Features】 ■ The series' maximum grinding power of 35Hz (2100rpm) ■ A new design grinding jar with excellent airtightness suitable for dry grinding, wet grinding, freeze grinding, and grinding under gas atmosphere (pressure resistant up to 5bar) ■ Grinding jar capacities of 50ml, 80ml, and 125ml; two jars can be set simultaneously ■ Suitable for long-duration grinding: ideal for applications in reaction systems such as mechanochemistry ■ Remote operation via smartphone or tablet using the new RETSCH App (sold separately)
Reduce vibration and noise during processing! Achieve a good surface finish and significantly extend tool life.
The "General Purpose Unequal Lead End Mill Short 4-Flute RF100U" is a product from Gühring Japan, a comprehensive tool manufacturer that handles various cutting tools. By adopting an unequal lead (with two or more different helix angles), it suppresses resonance, reducing vibration and noise during machining, resulting in a good surface finish and significantly extending tool life. It features a flat shank. 【Features】 ■ Made of carbide material ■ DIN Standard No. 6527K ■ FIRE coating with excellent wear resistance and impact resistance ■ 4 flutes ■ Helix angles of 35 degrees and 38 degrees ■ Blade diameter tolerance h10 *For more details, please refer to the catalog or feel free to contact us.
![[Processing Example] DC End Mill](https://image.mono.ipros.com/public/product/image/cd3/2000511518/IPROS49961655193331853432.jpeg?w=280&h=280)
We will introduce examples of machining with DC end mills, including the wear condition of the cutting edge after processing!
We would like to introduce a machining example of the "DC End Mill" that we handle. In User Company A's mold department, machining was conducted using the currently used end mill along with cutting conditions, depth of cut, and machine to observe the tool wear state. The currently used end mill A required a tool change after 1.5 hours of machining, but after testing the "DCB2100," it was able to machine for 3.0 hours with minimal tool wear, allowing for a total of 4.5 hours of machining. After reviewing the photos taken post-machining, formal adoption was decided. 【Overview】 ■ Tool used: DCB2100 ■ Specs: R5×18×100L ■ Material being machined: S50C (HRC35) ■ Spindle speed: 7370 min^-1 ■ Feed rate: 300 mm/min *For more details, please refer to the PDF document or feel free to contact us.
Achieve high performance at a low price! Vibration reduction, noise reduction, and significant reduction in maintenance work.
The "Fujisaki Gear Type Mill" is a product that significantly enhances crushing efficiency. It is a gear-driven type that improves return reduction recovery rate and machine lifecycle. Additionally, we can manufacture the drums for ball mills and rod mills according to customer requests. Please feel free to contact us when you need assistance. 【Features】 ■ Significant increase in crushing efficiency ■ Reduction of vibration, noise, and maintenance work ■ Improved return reduction recovery rate ■ Enhanced machine lifecycle *For more details, please refer to the PDF document or feel free to contact us.
Introducing high-hardness end mills suitable for hardened steel over 60HRC, along with processing examples.
"HARD BEAT" is a high-hardness end mill with AD coating. It enhances tool rigidity and is suitable for hardened steel with a hardness of 60HRC or higher. Additionally, it has proven performance not only with high-hardness steel but also with FCD. 【Processing Example】 <Rough Machining> ■ Tool Used: HBT-2 No Radius ■ Work Material: S43CN ■ Machining Details: Side Cutting (Rough Machining) ■ Cutting Conditions - Spindle Speed: 3000 min-1 - Cutting Speed: V=94 m/min - Feed Rate: 450 mm/min - Depth of Cut: ae=15～2.0 mm ap=9 mm *For more details, please refer to the PDF document or feel free to contact us.
Achieve excellent cutting performance and machining surfaces! Introducing aluminum end mills along with processing examples.
"ZERO BEAT" is a non-coated end mill for aluminum. It adopts our unique blade shape for aluminum, achieving excellent cutting performance and surface finish. It is also compatible with inclined cutting such as helical machining and wrapping processing. Additionally, the DLC (hydrogen-free type) coating can be added for further performance enhancement. 【Processing Example】 ■ Tool Used: ZBT-T Custom (Blade Diameter φ18×R0.2, Blade Length L35, Shank Diameter φ16, Total Length L105) ■ Material Being Processed: A5052 ■ Processing Details: Rough machining ■ Cutting Conditions - Spindle Speed: 20000 min-1 - Cutting Speed: V=1130 m/min - Feed Rate: 10000 mm/min - Depth of Cut: ae=9～12 mm, ap=2 mm *For more details, please refer to the PDF document or feel free to contact us.
セラミックコーヒーミルです。
当社で運営する会員限定の卸売(仕入れ)サイト「Kenko卸.com」では、 「コーヒーミル【ピュア】 MI-015」を取り扱っております。 セラミック刃なので、金属臭がなく、コーヒー本来の風味を損ないません。 粗さ調節ネジでお好みの粗さが選べます。 摩耗しにくく、使い始めの挽き味が持続します。 クリアーなフタ・容器で中身を確認しながら挽くことができます。 挽き立ての美味しさをお楽しみください。 セラミック刃は取外しができ、水洗いしても錆びず いつでも清潔にお使いいただけます。 （内刃のみ）
セラミック刃なので、簡単に粉末にでき、お料理にも使えます。
当社で運営する会員限定の卸売(仕入れ)サイト「Kenko卸.com」では、 「お茶ミル ピュア MI-014」を取り扱っております。 粗さ調節ネジでお好みの粗さが選べます。 クリアーなフタ・容器で中身を確認しながら挽くことができます。 石臼型セラミック刃をゆっくり挽くことで、 熱をもたず酸化しにくくお茶本来の風味を楽しめます。 摩耗しにくく、使い始めの挽き味が持続します。 セラミック刃は取外しが可能です。 水洗いしても錆びることがなくいつでも清潔にお使いいただけます。
Optimized for thin-walled parts by reducing axial cutting resistance! Extended cutter body lifespan through shim protection.
The "Sandvik Coromant CoroMill MF80" is a high-performance face and shoulder milling cutter. It features internal lubrication that achieves good chip evacuation, and a lightweight cutter body that is particularly effective in NC machining. The robust chip seat design ensures additional safety against inconsistent forces caused by variations in casting and forging. 【Features】 ■ Open pocket design that achieves good chip flow, especially in the machining of steel materials (ISO P) ■ New cutter shape allows for machining close to fixtures or parts ■ New design reduces chatter during machining with long overhangs, and reduces cutter weight by up to 35% *For more details, please refer to the PDF document or feel free to contact us.
