Last Updated： Aggregation Period:Oct 22, 2025～Nov 18, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Oct 22, 2025～Nov 18, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Oct 22, 2025～Nov 18, 2025
This ranking is based on the number of page views on our site.
3481～3495 item / All 3603 items
Asuka Type A = for soft materials. Asuka Type D = for hard materials.
The Asker A and D type rubber and plastic hardness testers are used for measuring the hardness of various rubber and plastic materials (durometer hardness testing) and are manufactured in compliance with foreign standards and JIS standards (JIS K 6253, JIS K 7215, ASTM D 2240, ISO 868). For more details, please contact us or refer to the catalog.
Measurement of properties such as elasticity, viscosity, and hardness of the specimen surface.
- Quality control of products and materials - No samples needed, measurement and analysis on the spot - On the production line of factories - Sensor heads for silicone gel are also available, accommodating a wide range of material properties The viscoelasticity measuring device, the Besmeter, was developed to measure the characteristics of the surface layer of the specimen, such as elasticity, viscosity, and hardness, with the aim of appropriately evaluating the properties of materials. Unlike conventional measuring devices, the measurement of viscoelasticity by the Besmeter is a patented technology that realizes the measurement of viscosity and elasticity as defined in physics. ● Validation of silicone gel data From evaluation results by major chemical manufacturers Based on the viscoelastic evaluation results of silicone gel using our E-200DT and UBM's Rheogel E4000, 1. A good correlation is observed between needle penetration and hardness. 2. The correlation of elasticity, viscosity, and relaxation time changes with different types of polymers. Thus, by creating an appropriate calibration line, relative evaluation is possible. ● Custom modifications are available For example, 1. Setting measurement range according to the "hardness" of the specimen 2. Selecting sensor head materials according to application (metal, PPS resin, etc.) 3. Custom design of probe shapes
The thickness of the laser disc will be measured (both contact and non-contact) and used within the evaluation system.
We will build a system for measuring various parameters such as voltage, current values, temperature and humidity, and pressure, as well as data processing. Additionally, Cosmotec's inspection equipment, based on measurement technology, plays a central role in quality assurance at our customers' production sites. 【Configuration】 ○CPU: Z80 4MHz ○ROM: 4Kbyte ○RAM: 1Kbyte ○I/O: TTL, 6 Port ●For more details, please download the catalog or contact us.
Compared to conventional products, it has a faster response speed to odors and higher accuracy in repeated odor measurements! This is a portable odor sensor developed by odor judges!
If it's about odors, leave it to the specialized company, Karmore Co., Ltd. We have been facing unpleasant odors for nearly 30 years, providing odor control solutions across Japan and overseas every day. ● An odor measuring device developed from scratch by odor judges ● 【Features of the Odor Sensor POLFA】 1. A portable odor sensor that is just the right size for your palm. 2. Higher response performance compared to conventional odor sensors! (Fast reaction speed to odors!) 3. Only the truly necessary functions selected by odor judges are included, so no complicated settings or operations are required. Anyone can use it easily! 4. The graph display is always on, making it easy to understand odor fluctuations. 5. The menu screen is in English, allowing use by those who cannot read Japanese. 6. Odor measurement data is recorded on a (micro) SD card, so no other applications are needed to extract the data. 7. Power is supplied by AA batteries or an AC adapter. Since it does not have a built-in rechargeable battery (lithium battery), export procedures are easy. <<< Odor Sensor POLFA is also available for rent >>>
Measuring range from 0.2 to 5000 mNm! Sizes available from φ11×16mm. Good responsiveness, with a torsion angle of approximately 1 degree at rated capacity. *Custom specifications are also available.
Our company offers a wide range of compact and high-performance "micro torque meters" that ensure responsiveness, measurement accuracy, and durability while using strain gauges. Starting with ultra-compact products with a rated capacity of 0.2 to 5 mNm, we provide products that cover a wide measurement range, including 0.2 to 2000 mNm, 10 to 500 mNm, and 50 to 5000 mNm, allowing customers to choose according to their needs. 【Features】 ■ Good responsiveness, with a twist angle of about 1 degree at rated capacity ■ Achieves low prices and short delivery times through in-house processing ■ Capable of accommodating various applications with bidirectional load cells, torque thrust meters, etc. ■ Not only standard catalog items but also a wide range of custom specifications are available 【Examples of Applications】 ◎ Torque of small bearings ◎ Dynamic torque of small motors ◎ Torque of electronic devices and components ◎ Measurement of micro and ultra-micro torques ◎ Cogging measurement of motors ◎ Measurement of opening/closing and rotation of rotating parts ◎ Opening/closing measurement of electrical product levers ◎ Measurement of softness, twisting, and bending *You can view a comprehensive catalog with additional application examples available for PDF download. Please feel free to contact us.
![3D shape measurement service [*Case study collection gift & demo available*]](https://image.mono.ipros.com/public/product/image/2cf/2000523795/IPROS51178851079619803316.png?w=280&h=280)
From difficult measurements to maintenance and renovation work! Utilizing 3D data to achieve shorter construction periods and cost reductions.
The maintenance solution business utilizing 3D laser measurement employs three-dimensional measurement technologies such as laser scanners and laser trackers to meet a wide range of needs, from small machinery to entire factories. In particular, it enables quick measurement and data collection for equipment that is difficult to assess in high places or narrow spaces, as well as for equipment that requires documentation but lacks drawings. By utilizing 3D data in construction, it achieves reduced construction time and cost savings. 【Features】 ■ High-precision dimensions can be obtained on-site - Real-time measurement of positions and dimensions for repair work, etc. - Measurement at the micron level for tasks such as alignment and span measurement ■ Rapid 3D documentation of machinery and equipment without existing drawings or CAD files ■ Measurement possible even in high or confined spaces where actual measurement is difficult ■ High-precision measurement on-site to identify the causes of equipment anomalies using 3D data *We are currently offering a case study collection as a gift! Demo measurements are also available. For more details, please contact us or download the PDF to learn more.
We provide total support from sales to installation and maintenance of powder measurement devices.
The powder measurement contract service is provided by our subsidiary, "High Techno Rise Co., Ltd." Do you have any concerns regarding powders (raw materials and products) at your site (both development and factory)? We will solve your problems related to powders. ◆ Evaluation of a wide variety of materials, including battery materials and metal 3D printer powders, is possible. ◆ Testing can be conducted with a minimum of 1ml. ◆ Extremely small forces can be measured over a wide range from 10nN to 10N. ≪Products handled by High Techno Rise≫ 1: Powder Friction Testing Device MKPF-S100 type *See attached image Measures the "mechanical properties" of bulk powders. Features: Multiple physical property parameters can be obtained in a single test. Measurement is possible with just 1ml of powder/sample recovery is possible. For example... Internal friction angle/wall friction of pharmaceutical materials can be obtained, allowing evaluation of stickiness. 2: Powder Strength Testing Device MKPS-A100 type Measures "strength" at the individual particle level. Features: A wide range of measurements from 10nN to 10N is possible. Measurement is possible for particles ranging from 5µm to 1mm. For example... Clear peak values can be obtained during the fracture of coated resin materials. Please feel free to consult with us.
![We will investigate the electrical properties of aluminum materials under high-temperature environments [Contract Measurement Service].](https://image.mono.ipros.com/public/product/image/68e/2000171363/IPROS05987205103333146029.jpeg?w=280&h=280)
Resistance measurements can be performed at 300℃. It is also possible to combine with high current conduction.
What happens at the contact point during electrical measurements? How does the contact resistance value change over time? What is the temperature rise when a large current, such as 400A, is flowing? What is the contact resistance value in a high-temperature environment of 300°C? By conducting actual measurements, it is possible to quantify what is really happening. Additionally, by combining several types of devices, we can approach measurements that are closer to real-world conditions. We are also accepting requests for visits at any time. For more details, please contact us through our website. ○http://www.sankei-engineering.com/○
Capable of resistance measurement under continuous current of 400A and in environments ranging from -180 to 1000°C!
What happens at the contact point during electrical measurements? How does the contact resistance change over time? What is the temperature rise during high current flow, such as 400A? What is the contact resistance value in a high-temperature environment of 300°C? By conducting actual measurements, it is possible to quantify what is really happening. Additionally, by combining several types of equipment, we can approach measurements that are closer to real-world conditions. We are also accepting requests for visits at any time. For more details, please contact us through our website. ○http://www.sankei-engineering.com/○
Prism Coupler Type Optical Loss Measurement Device (Achieving World’s Highest Precision of 0.01 dB/cm!)
● Up to four lasers can be simultaneously mounted, including 633nm, 830nm, 1310nm, and 1550nm. ● Low price, with a one-year manufacturer warranty. ● Holds TL-9000 and ISO-9001 certifications. ● If you send us a sample, we will conduct a demo measurement.
The amount of ozone generated may decrease due to various conditions such as temperature and humidity.
When using an ozone generator, the method for measuring the concentration in the air is generally to use an "ozone meter" or "ozone concentration meter." However, the reality is that few people purchase machines that cost tens of thousands of yen solely for the purpose of measuring ozone concentration. So, what should be used to determine the ozone concentration? It is the ozone generation amount from each ozone generator manufacturer. *For detailed content of the column, you can view it from the related links. For more information, please feel free to contact us.*
Wide-ranging support from large measurement objects to equipment and mold measurements! Introduction of on-site 3D measurement and CAD modeling services!
At the original manufacturing facility, we use non-contact 3D digitizers such as "ATOS Triplescan," "Compactscan," "TRITOP," "INFINITE FOCUS," "X-ray CT scan," and "Artec" to measure all kinds of three-dimensional shapes and create 3D data. It is now possible to visualize shapes that were previously difficult to understand. After 3D measurement, it is possible to create CAD data! Our services are utilized in various scenarios such as cultural heritage preservation, product inspection, collision testing, and expansion deformation analysis. For large measurement objects that are difficult to move, our professional staff will come to you with high-precision measuring equipment. Right now, we are offering a free collection of case studies on on-site 3D measurements! We clearly present the problem points, solutions, measurements, analyses, and actual effects, and introduce case studies of on-site measurements for aircraft, ships, vehicle bodies (white bodies), molds, and more. We encourage you to take this opportunity to check it out. ● The collection of on-site 3D scan case studies can be downloaded from the catalog. For more details, please contact us.
