We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Measuring Instrument.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Measuring Instrument(ol) - List of Manufacturers, Suppliers, Companies and Products

Last Updated： Aggregation Period:Oct 22, 2025～Nov 18, 2025
This ranking is based on the number of page views on our site.

Measuring Instrument Product List

166～180 item / All 219 items

Displayed results
[Topic] For the Optimal Operation of Anaerobic Digestion Equipment

[Topic] For the Optimal Operation of Anaerobic Digestion Equipment

Measurement of volatile acids and alkalinity! Related online titration devices are also listed.

In the multi-stage process of anaerobic digestion, various types of bacteria first convert complex organic compounds into volatile fatty acids (VFA), and finally into biogas (methane). To achieve optimal results, the pH of the digester should be between 6.5 and 7.5; however, merely measuring the pH is not sufficient. To ensure sustainable and safe operation, adequate buffering capacity (Total Alkalinity, TAC) is necessary to compensate for changes in acid concentration. A digester that becomes too acidic is harmful to bacteria, especially methane-producing bacteria. The occurrence of abnormal conditions due to low pH can be very costly to address, and re-seeding the digester can take a long time. Therefore, measuring the ratio of VFA to TAC serves as a good indicator of the actual state of the digester. *For more details, please refer to the related links or feel free to contact us.*

  • Other measurement, recording and measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
ASC IMU 7 Series Inertial Measurement Unit

ASC IMU 7 Series Inertial Measurement Unit

Main markets: automotive, railway, agriculture, civil engineering, marine

The ASC Inertial Measurement Unit (IMU) is a 6-axis system that uses a combination of gyroscopes and accelerometers to measure linear and angular motion. The ASC MEMS IMU 7.x.y incorporates precision inertial sensors, including a 3-axis accelerometer and a 3-axis gyroscope. This allows the IMU to output raw acceleration signals and rotational velocity signals, which can be integrated to obtain actual position and orientation. The ASC IMU 7.x.y is equipped with either an ASC LN series (low noise) accelerometer or an ASC MF series (medium frequency) accelerometer, with an acceleration range of ±2g to ±50g. The IMU 7.x.y features a MEMS vibrating ring gyro with a range of ±75°/s to ±900°/s. Users can configure the IMU by selecting from a wide range of acceleration and rotational velocity ranges. It is lightweight, low power consumption, and has a wide temperature range.

  • Sensors
  • Testing Equipment and Devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Unit 2 completed! Automatic micrometer measurement device [Yamazen TFS]

Unit 2 completed! Automatic micrometer measurement device [Yamazen TFS]

Supports long object work! Combines micrometers and collaborative robots to automate the measurement process!

**Main Features** - Measures the outer diameter at two locations using a micrometer automatic measurement device. - Measures the total length with a digital micrometer automatic measurement device. → Compatible with long workpieces. - Displays measurement results using Mitutoyo's data collection software 'MeasurLink' and sorts workpieces based on the measurement results. → OK products are packaged in specified quantities at designated locations. → NG products are placed in designated locations according to NG items. - Reduces measurement time by 6 seconds by measuring while holding the workpiece, achieving a reduction in cycle time. - Designed with space-saving in mind. - The adoption of collaborative robots eliminates the need for safety fences, allowing shared workspace with humans. - The use of Techman, which comes standard with a camera, reduces installation costs and enables recognition of part shapes. We also conducted interviews, so please be sure to watch the video!

  • Other measurement, recording and measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Carbon Monoxide Detector (CO Meter) "XP-333III ai"

Carbon Monoxide Detector (CO Meter) "XP-333III ai"

The installation of the sampling tube is one-touch! It provides excellent operability for measuring the combustion efficiency of combustion devices.

The "XP-333III ai" is a carbon monoxide (CO meter) compatible with the gas detector management operation Xai system. It assesses the condition of a wide range of combustion equipment. The changes in concentration during measurement are indicated by the color of the LED. Additionally, its compact and slim design includes a lighting lamp, enhancing usability in dark environments. Please feel free to contact us when you need assistance. 【Specifications (excerpt)】 ■ Target gas: Carbon monoxide (CO) in the exhaust gases of gas appliances ■ Detection principle: Constant potential electrochemical method ■ Sampling method: Automatic suction type ■ Detection range: SAFETY mode up to 2000 ppm, other modes 0.000–0.499 vol% ■ Response time: Time to pass 90% of the measured gas concentration is within 14 seconds *For more details, please download the PDF or feel free to contact us.

  • Gas Detectors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Biochemical testing products 'B-105N/B・Ht-205'

Biochemical testing products 'B-105N/B・Ht-205'

Measuring total bilirubin and hematocrit in newborn blood! No need to replace the light source lamp.

We handle the "B-105N/B·Ht-205," which are bilirubin meters and bilirubin-hematocrit meters. The "B-105N" is a device for measuring total bilirubin in the blood of newborns. It uses an LED as a light source, so it does not require replacement and can be used semi-permanently. Additionally, the "B·Ht-205" can measure hematocrit in addition to the functions of the same product. 【Common Features】 - Uses LED as a light source, so it does not require replacement and can be used semi-permanently. - Automatically corrects hemolyzed samples up to 250 mg/dl, and displays a warning for levels above that. - Bilirubin concentration display can be selected in either mg/dl or μmol/l. - Zero and standard values are automatically calibrated. - No distilled water is needed for blanking. *For more details, please refer to the PDF document or feel free to contact us.

  • Other measurement, recording and measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Turbidity and fluorescence measurement device 'LF-8 Plus'

Turbidity and fluorescence measurement device 'LF-8 Plus'

Introducing a device for gene amplification detection using the LAMP method with just a few minutes of analysis time!

The "LF-8 Plus" is a device equipped with two types of measuring instruments: turbidity and fluorescence, allowing both data to be obtained in a single measurement. In addition to turbidity data for gene detection using the LAMP method, it can be combined with intercalating dyes or fluorescent probes (such as Quenching Probes and Molecular Beacons). The included PC software "LF-8 Manager" enables turbidity measurement and gene polymorphism analysis, while the PC software "LF-8 Analyzer" allows for the analysis of gene amplification data using fluorescent substances and melting curve analysis, making it possible to perform various measurements using the LAMP method, not just gene polymorphism analysis. 【Features】 ■ Equipped with two types of measuring instruments (turbidity and fluorescence) ■ Analysis time of just a few minutes ■ Very simple operation ■ Capable of gene polymorphism analysis *For more details, please refer to the PDF document or feel free to contact us.

  • Other measurement and measuring equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Crystallinity and density of polyethylene

Crystallinity and density of polyethylene

It takes 25 minutes from taking out the sample to evaluating the results. Measurable at the line!

The crystallinity of polyethylene (PE) is determined by factors such as hardness, compressive strength, tensile strength, transparency, and the material's electrical resistance. Measuring crystallinity is an important measurement related to the specifications of PE grades, and commonly used methods are very time-consuming and require complicated sample preparation. Our method for measuring the crystallinity of PE can be performed at line without the need for special training and is not dependent on laboratory conditions. 【Features】 ■ Quality control of product specifications ■ Measurement at line ■ Minimal sample preparation (can be measured directly in pellet or powder form) ■ 25 minutes from sample extraction to result evaluation ■ Equipment validation through daily check functionality *For more details, please refer to the PDF document or feel free to contact us.

  • image_01.png
  • image_04.png
  • Other polymer materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Automatic Moisture Measurement Device for Gas Samples "Easy Aqua"

Automatic Moisture Measurement Device for Gas Samples "Easy Aqua"

It is possible to analyze moisture with high sensitivity and accuracy!

"Easy Aqua" is a moisture concentration measurement device designed to easily measure moisture in gas samples using gas chromatography. It can concentrate and measure moisture in sample gases with high sensitivity and accuracy. Additionally, it is capable of measuring moisture in pure gases as well as in corrosive gases and liquefied gases. 【Features】 ■ Capable of measuring moisture with high sensitivity (1 vol.ppm) ■ Adjustable moisture concentration levels ■ Can measure even at high moisture concentrations ■ Easy maintenance *For more details, please refer to the catalog or feel free to contact us.

  • Analytical Equipment and Devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Uniformity measuring instrument "UA-10A Series" high-speed inline inspection

Uniformity measuring instrument "UA-10A Series" high-speed inline inspection

Specialized in high-speed measurement and compatible with inline inspection, high-speed and stable measurement of uniformity.

The Uniformity Measuring Device UA-10A is a compact and lightweight imaging measurement instrument that achieves high-speed evaluation. It is designed with specifications suitable for production processes and comes standard with an SDK for external control. 【Features】 1. High-speed uniformity measurement in just 0.98 seconds 2. Equipped with a 2.3-megapixel CMOS camera 3. Wide-range brightness measurement 4. Three types of lens variations 5. A diverse lineup of analysis software

  • Other measurement, recording and measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Ascona/Promex (Profile Cross-Section Inspection Machine and Surface Inspection Machine)

Ascona/Promex (Profile Cross-Section Inspection Machine and Surface Inspection Machine)

The operation is simple, measurements can be taken in just a few seconds, and the preparation/cutting conditions and effort for the material have been significantly reduced.

Aluminum, resin, rubber, and various extruded materials are supported. ASCONA goes beyond quality control to optimize the entire manufacturing process. ✔ easy usage ✔ results within seconds ✔ measurements at the press ✔ objective results ✔ ROI -1 year ✔ decreasing scrap rates ✔ increase of productivity ✔ continuous process control ✔ 100% made in Germany

  • Defect Inspection Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Measuring Instrument

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.