Last Updated： Aggregation Period:Mar 18, 2026～Apr 14, 2026
This ranking is based on the number of page views on our site.
1～30 item / All 105 items
Drainage fitting 1-1/4
●It ends with a male thread (1-1/4) as shown in the picture. Please choose the direction of water drainage with the drainage pipe (straight and elbow). *The included plug has changed from a chain type to a pull ring type.
Introducing a variety of standard hoses and fittings made by Parker!
This catalog is a comprehensive catalog from Amano Kiko Co., Ltd., the authorized distributor for Parker Hannifin Corporation, primarily dealing with hose and air equipment, as well as hydraulic equipment. It features a wide range of hose products, including Parker's non-skive hydraulic hoses and non-skive hydraulic hoses (no stripping required), as well as fittings such as DIN L series, DIN L series with O-rings and male threads, DIN S series, and DIN 60° cone male/female fittings. [Contents] ■ Basic knowledge of world-standard hoses and fittings ■ Non-skive hydraulic hoses ■ Non-skive hydraulic hoses (no stripping required) ■ Various crimp metal series ■ Field attachable fittings, etc. *For more details, please refer to the catalog or feel free to contact us.
Antique finish with uneven black plating! Brackets that make it easy to create shelves.
The "1x4 shelf bracket" from Oari allows you to easily create shelves by screwing it into 2x4 lumber that is braced against the wall or floor and ceiling, simply passing 1x4 lumber through it. With a smart and plain finish, it has a well-fitting design aesthetic. The uneven black plating gives it an antique feel. 【Features】 ■ Easy-to-make shelf bracket ■ Smart, plain design with a good fit ■ Uneven black plating for an antique look *For more details, please feel free to contact us.
Can be used for fixing boards! There are countersunk holes and straight holes on each side, allowing for versatile use!
The "Z Angle" from Ōsaki is used to secure 1x4 lumber to 2x4 lumber like a slatted shelf, or to flatly secure 1x4 lumber as a shelf board in a frame. One side has countersunk holes, and the other side has straight holes, allowing for versatile use according to your needs. 【Features】 ■ One side has countersunk holes, and the other side has straight holes ■ When securing 1x4 lumber to 2x4 lumber like a slatted shelf ■ When flatly securing 1x4 lumber as a shelf board in a frame *For more details, please feel free to contact us.
It's easy to determine the angle and achieve a strong fastening! Ideal for creating boxes with partitions.
The "1x4 Joint" from Dairi is used to fix 1x4 lumber in L, T, or X shapes. It allows for easy angle determination and strong fastening, making it ideal for creating boxes with dividers. Made from slightly thicker metal plates, it also has a remarkable presence. 【Features】 ■ Fastening hardware for 1x4 lumber ■ Ideal for creating boxes with dividers ■ Made with slightly thicker metal plates ■ Remarkable presence *For more details, please feel free to contact us.
Efficient installation of vibration dampers! Suspension bolt vibration damper fittings from the skillful reduced construction series.
The "Gatchiri Lock" is a suspension bolt stabilizing fixture that significantly reduces installation time. It can be retrofitted to existing suspension bolts for stabilization, allowing for one-touch temporary fixing. We offer two types: "one-sided" and "both-sided." Our company is committed to developing new functional products that meet the diverse needs of job sites, free from traditional construction methods. 【Features】 ■ Labor-saving stabilization installation ■ Slide-in with one hand ■ Temporary fixing and height adjustment available ■ Significantly reduces installation time ■ Available in one-sided and both-sided options *For more details, please refer to the PDF document or feel free to contact us.
●Type with insertable intermediate material
It is a joint fitting that can be installed even after assembly. Since it can be added later, there's no need to reassemble!
ボルト1本締めるだけ！技あり省施工シリーズの吊りボルト用ケーブル支持金具
『ベビーラック』は、仮止め・高さ調節が可能なケーブル支持金具です。 吊りボルト・壁面用の「FBR150C-W3W4」をはじめ、吊りボルト用の 「FBR200C-W3W4」と「FBR300C-W3W4」をラインアップ。 当社は、多様化する現場のニーズに対応し、従来の施工方法に捉われない 新たな機能の製品開発に取り組んでいます。 【特長】 ■片手でスライドイン ■仮止め・高さ調節可能 ■ボルト1本締めるだけでOK ■吊りボルトの接触も防ぐ ■カバーなしもご用意 ※詳しくはPDF資料をご覧いただくか、お気軽にお問い合わせ下さい。
Stable running performance at a maximum speed of 250m/min! This is a roller chain type clip for high-speed mercerizing.
This product is a roller chain type high-speed mercerizing clip developed based on extensive experience and excellent technology backed by a proven track record in the manufacturing of mercerizing machines with overwhelming market share. It offers stable operation at a maximum speed of 250m/min and uniform contact with the sliding surface. We have a total of five types available, including the SC-2 5"P high-speed mercerizing clip and the SC-1 4"P high-speed mercerizing clip. 【Product Lineup】 ■ SC-2 5"P High-Speed Mercerizing Clip ■ SC-1 4"P High-Speed Mercerizing Clip ■ S-1 Mercerizing Clip (Head Keri) ■ S-2 Mercerizing Clip (Head Keri) ■ S-4 Mercerizing Clip (Belly Keri) *For more details, please refer to the PDF document or feel free to contact us.
Widely usable! Angle brackets that can be used for corner connections and reinforcements with a basic shape.
The "Angle Bracket" from Ōdai is a versatile angle bracket that can be used widely, including sizes like 2x2, 1x4, 2x4, and 4x4. It has a basic shape and can be used for corner connections and reinforcements. Although it may seem plain, its thickness gives it a strong presence. 【Features】 ■ Versatile angle bracket ■ Basic shape ■ Usable for corner connections and reinforcements ■ Thickness adds to its presence *For more details, please feel free to contact us.
With a speedy and seamless thickness adjustment, mold changing times are significantly shortened! This tool has gained a high market share in Japan and is trusted by customers around the world.
The Matex EASYCLAMP is widely used both domestically and internationally as a mold fixing tool. The EASYCLAMP is a tool born from experience, as we have been engaged in plastic injection molding for many years. The sluggish mold setup changes required during production switches were always a significant barrier to improving our productivity and reliability. We developed the EASYCLAMP by incorporating requests from the factory and constantly improving the design. Over the years, it has received high praise from customers around the world for its ease of use and reliability. EASYCLAMP is a registered trademark of Matex Co.,Ltd. 【Features】 ■ One type of clamp can fix four different mold thicknesses! ■ Thanks to our unique structure, the mold can be removed and installed simply by loosening the bolts slightly. ■ If there is limited space on the die plate, it is possible to install the block by shifting it. ■ The large surface area of the block prevents damage to the die plate and bolt holes. ■ The body and block are connected by a link, allowing the mold to be attached and detached without any parts getting lost. ■ The bolts are tightened vertically so as not to damage the screw threads on the die plate. *For more details, please refer to the materials below (PDF).
Compatible with seismic intensity class 7! Can be installed on objects with a flat surface that are 18mm or less in height from the floor.
The "MSTL-BG" is a side-mounted seismic bracket designed to be installed on the floor and the side of the object. It can be easily installed without moving the object. The height of the object can be up to 1 meter (with a center of gravity position of up to 0.5 meters). Please feel free to contact us when you need assistance. 【Specifications】 ■ Recommended installation weight - 100 kg (when using 2 units) - 200 kg (when using 4 units) ■ Bracket size (mm): W155 × D84.2 × H70.9 ■ Quantity: 1 set (4 units included) *For more details, please refer to the PDF document or feel free to contact us.
This is a connector fitting for the PS series!
This is a connecting fitting for the PS series. It can be secured with two or four points. To accommodate site conditions and the expansion and contraction of the resin, the upper fitting has elongated holes to allow for some flexibility in bolt tightening. *For more details, please download the catalog.
Safety, peace of mind, no welding NETIS registered: KT-200095-A
The double plate is one of the patented examination items, which involves tightening a plate with a "safety pin" using bolts and driving it in with a hammer, allowing it to bite into the steel plate and control the "opening, shifting, and rattling" of the plate. By securely fixing the steel plate with the double plate, it prevents serious accidents caused by the rattling of the steel plate due to cutting the welded sections, as was the case with traditional methods. The double plate is safe and easy to install, requires no welding, and therefore does not emit CO2 during welding, making it environmentally friendly. It is a construction site steel plate fastening safety device that does not incur repair costs upon the return of the steel plate. *Rental options are also available.
Protect equipment and lives from major earthquakes! Why not consider simple and reliable earthquake measures?
The "Pro Seven Seismic Mat" is a special gel (urethane elastomer) that possesses both solid and liquid properties. With excellent flexibility and adhesive strength, it responds to various vibrations. Even in the event of a major earthquake with a seismic intensity of 7, it prevents damage and tipping of important equipment caused by shaking. By using "dedicated seismic brackets" for securing equipment, it demonstrates outstanding effectiveness against earthquakes. 【Features】 ■ Passed seismic intensity 7 tests (with acceleration of 1000 gal or more) ■ Easy installation by simply laying it down, and it is removable ■ Can be cleanly peeled off if removed slowly ■ Responds to shaking in all directions: front-back, left-right, up-down ■ Can be attached to materials that can hold tape *For more details, please refer to the PDF document or feel free to contact us.
Just tighten one fixing screw! Outlet installation auxiliary bracket.
The "DH Holder (Socket Mounting Type)" is an auxiliary mounting bracket for sockets that is used with DIN rails manufactured by Shinohara Electric. 【Features】 1. It now supports the installation of Panasonic and Meiko Electric tumbler switches (only DH-5050TS). 2. It can be fixed at any position on the DIN rail by simply tightening one fixing screw. 3. It uses flat head screws for the mounting screws (with countersunk holes), making the mounting surface flat. 4. It is pre-processed to allow for easy installation of sockets. 5. In addition to socket installation, we can also provide additional processing to allow for the installation of noise filters, etc., upon request. *For more details, please refer to the PDF document or feel free to contact us.
![All stainless steel tripod-compatible antenna mounting bracket [NB500]](https://image.mono.ipros.com/public/product/image/422478/IPROS18392370213430605221.jpg?w=280&h=280)
Universal antenna mounting bracket that can be attached to a camera tripod, compatible with 1/4-20UNC screws.
- 3mm thick all stainless steel This is a 3mm thick antenna mounting bracket made of durable, rust-resistant all stainless steel. - Compatible with 1/4-20UNC screws This is a universal antenna mounting bracket that can be attached to camera tripods. - Compatible with SMA, M, and N type connectors It has mounting holes for φ6.5 (SMA connector, M6 bolt) and φ16.2 (M and N connectors). - Compatible with U-bolts Our U-bolts (U35, U45) can be mounted.
Network cameras are used not only for communication, disaster prevention, and crime prevention, but also for monitoring production lines and improving business operations.
This is a product from the dedicated mounting bracket series for network cameras. There are various challenges related to installation scenes and fixing methods, and solutions are required. "Camera Rack" addresses this theme. A total of 10 different types are available in a rich lineup! Please choose according to your installation scene. 【Features】 ■ Various installations are possible through combinations ■ Sensors and lighting fixtures can also be mounted *For more details, please refer to the PDF materials or feel free to contact us.
Display brackets, laser processing experts.
Since our founding in 1973, we have aimed to create products that bring joy to our customers, achieving steady growth and development. We sincerely thank you for your warm support, which has made this possible. In today's rapidly globalizing and diversifying world, we will continue to gather information, further enhance our technological capabilities, and develop products that can accurately meet the diverse needs of our customers. To respond to the increasingly complex and varied user needs, we will not only introduce the latest equipment but also continuously engage in the development, improvement, and research of our facilities, ensuring we meet user needs with the best production efficiency. We kindly ask for your continued guidance and support in the future. 【Business Activities】 - Metal pressing, sheet metal forming, lighting fixtures, and gas appliance parts manufacturing - Store fixtures and display hardware For more details, please contact us or download our catalog.
This is an adjustment bracket (U-shaped metal fitting) for mounting EIA standard equipment onto JIS standard mounting rails (mounting angles).
This is a bracket that converts IS standard mounting rails to EIA standard. It is an adjustment bracket (U-shaped bracket) for mounting EIA standard equipment onto JIS standard mounting rails (mounting angles). You can specify the U number, offset length, and it can be custom-made starting from one set.
The polished bar steel is bent and treated with phosphate.
The material used is "polished round steel - SGD." After being bent by hand, it undergoes phosphate treatment for rust prevention. Since polished round steel is a so-called raw material, no heat treatment is performed after processing. For similar shapes, we have a track record with the following materials: 1) Ordinary iron wire - SWM-F 2) Piano wire - SWP-A, SWP-B 3) Hard steel wire - SW-B, SW-C 4) Stainless steel wire - SUS304-W1 5) Spring stainless steel wire - SUS304-WPB Our company handles spring processing and bending of round bars. Please feel free to consult us if you have any concerns. Turuoka Spring Co., Ltd. Contact: Ujiie Phone: 0235-22-0407 FAX: 0235-22-0546 Email: web@tohj.com We also support web conferencing.
Supports two heights from the floor to the shelf! Confirmed effectiveness at a seismic intensity of class 7 in earthquake resistance tests.
We would like to introduce our "Seismic Brackets for Racks." The height of the installed items can be up to 1.8m (with a center of gravity position up to 0.9m), or up to 2.1m (with a center of gravity position up to 1.05m) when using drill screws. We offer two models: "MRAS100-BG" and "MRAM100-BG." Please feel free to contact us when you need them. 【Features】 ■ Easy installation with mounting between the floor and shelf ■ Simple installation without moving the installed items ■ Supports two height options from the floor to the shelf ■ Confirmed effectiveness for seismic intensity class 7 in seismic testing ■ Service life of 8 to 10 years *For more details, please refer to the PDF document or feel free to contact us.
Preventing container tipping is easy with Rack Raku! Choose from three types depending on the installation situation and wall material!
"Bonberakku" is a dedicated fixing device for preventing the tipping of containers. By using this product, it is possible to reduce the amplitude of container vibrations and the load applied to belts and chains compared to simple chaining. The belt and chain can each hold one container with a single unit, and the main body is made of aluminum, making it effective against rust due to the use of a cylinder belt. 【Features】 ■ Reduces the amplitude of container vibrations and the load on belts and chains compared to simple chaining. ■ Complies with LP gas equipment installation standards and handling guidelines. ■ The belt and chain can each hold one container with a single unit. ■ The main body is made of aluminum and is effective against rust due to the use of a cylinder belt. ■ Three types are available to match installation conditions and wall materials. *For more details, please refer to the PDF document or feel free to contact us.
The surface finish is 3C (trivalent chrome)! There are tapped holes for component mounting, so nutting is unnecessary.
The "Connection Kanag S" is a convenient product for supporting ducts, wiring, small parts, etc. All Kanag models have tapped holes for attaching parts (except for S-5), so there is no need for nuts. S-11 and S-11B are used when connecting U-1 and U-26 at right angles (S-11B has a 9φ hole instead of a tapped hole). Additionally, S-20-25 and S-20-32 are sturdy right-angle connection Kanags, so please use them for securing heavy objects. 【Lineup (partial)】 ■S-4-3C ■S-4-5-3C ■S-5-3C ■S-6-3C ■S-6B-3C *For more details, please refer to the PDF document or feel free to contact us.
Improved workability. Temporary installation of glass and adjustment of dimensions for transport are possible!!
Glass stairs commonly seen in offices and stores. By using glass for the wall section of the handrail, you can create an open space without a sense of pressure. Supporting such stairs is the stainless steel surface-mounted fix, OT-G640-SUS. Here are three key points: ★POINT★ ● Glass can be temporarily attached to the shaft, allowing for smooth installation. ● The glass overhang dimensions can be adjusted. ● Allowable load: 200 kg (when using 4 units and installed vertically). Please consider this fix that enables smooth installation. ◇◇◇◇◇◇◇◇ Joe Prince Takeshita Co., Ltd. ◇◇◇◇◇◇◇◇ Feel free to consult Joe Prince regarding hardware components. Osaka Branch: 06-6747-2591 Tokyo Branch: 03-3633-8505 Nagoya Branch: 052-893-0792 Fukuoka Office: 092-483-8566
