Metal fittings Product List and Ranking from 287 Manufacturers, Suppliers and Companies

PBS High Corrosion Resistant PBS Hanging Stop Fitting

The nails fit perfectly! Since there is no wobbling in the formwork, it makes it easy to pull through.

This product is a width stop fitting that allows nails to fit snugly without any play in the formwork. Since there is no play in the formwork, it makes the removal process easier. With the slits provided, the panel receiving part can be easily removed after demolding. For widths below 170mm, there is a Φ13 hole in the center, allowing for the installation of anchor bolts. Additionally, we also offer a "One-Touch Slide Panel" that integrates a sliding panel and a flat panel. 【Features】 ■ Width stop fitting with no play in the formwork ■ Easy removal due to no play ■ Slits allow for easy removal of the panel receiving part after demolding ■ PBS hanging width stop fitting (Material: ordinary steel plate) ■ High corrosion-resistant PBS hanging width stop fitting (Material: high corrosion-resistant galvanized steel plate) *For more details, please refer to the PDF document or feel free to contact us.

Company：エヌ・エス・ピー
Price：Other

Other work tools
Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Formwork Release "Strong Supporter"

It's also useful for reinforcing the joints of outer corners and partitions! It can flexibly adapt to the conditions on site.

The "Strong Supporter" is a product that can flexibly respond to site conditions when reinforcing formwork. It powerfully pushes against U-pins, the top edge of the formwork, and steel pipes (single pipes), making it convenient for reinforcing external corners and joints of partitions. Additionally, we also offer "Vertical Batten Supports," which are essential for safe and accurate construction. 【Features】 ■ Powerfully pushes against U-pins, the top edge of the formwork, and steel pipes (single pipes) ■ Convenient for reinforcing external corners and joints of partitions ■ "Strong Supporter Steel Pipe Floating Stopper Fitting" Even when strongly pushed against steel pipes (single pipes), it does not lift (for NSP formwork 600H only) ■ Compatible with formwork widths of 45 and 50mm *For more details, please refer to the PDF materials or feel free to contact us.

Company：エヌ・エス・ピー
Price：Other

Other work tools
Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Fixed fittings for shaped steel "Multi Clamper"

Compatible with various fixing methods in combination with Rail Ace!

We would like to introduce our fixed fittings for shape steel, the "Multi Clamper." When combined with Rail Ace, it supports a variety of fixing methods. It features a W3/8 tap specification and is available in both electric zinc plating and stainless steel versions. Additionally, we also offer "reinforcement fittings for Multi Clamper," "HC Clamper," and "clamper clips for HC Clamper." 【Product Lineup】 ■ Multi Clamper A (without swing) - Electric zinc plating version - Stainless steel version ■ Multi Clamper B (with swing) - Electric zinc plating finish - Stainless steel finish *For more details, please download the PDF or feel free to contact us.

Company：八州電工
Price：Other

Piping Materials
Piping parts
Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Seismic-resistant fixing hardware for H-shaped steel "Funbaldon"

Zero processing for H-shaped steel (no drilling or welding required)! Supports and fixes angle and channel materials.

"Funbaldon" is a fixed bracket for seismic resistance that offers high strength and high durability. It requires no drilling on H-shaped steel and does not involve any welding work. It can be fixed and removed without the use of special tools. Because it allows for easy replacement and position adjustment on site, it significantly reduces construction time. Since bolts and nuts are delivered pre-assembled, there is zero hassle of searching for missing nuts on site. 【Features】 ■ Easy installation ■ Quick and easy construction ■ High strength and durability ■ Reliable for seismic applications ■ Delivered with bolts and nuts pre-assembled *For more details, please download the PDF or feel free to contact us.

Company：八州電工
Price：Other

Anti-vibration, earthquake-proof, vibration-isolating devices
Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

HC Clamper Suspension Bolt Support Bracket

A tie wrap can be used in the long hole of the main body, allowing for direct attachment of bolts!

Introducing the "HC Clamper Hanging Bolt Support Bracket." The "Hanging Plate for Multi-Clamper" features larger wiring holes to facilitate the passage of electrical wires when installing lighting fixtures or outlet boxes. Please feel free to contact us if you need assistance. 【Related Products for Multi-Clamper】 ■ Hanging Plate for Multi-Clamper ■ Multi-Clamper A ■ Reinforcement Bracket for Multi-Clamper (for Angle Steel and Channel Steel) ■ Joint for Multi-Clamper ■ Multi-Clamper B ■ Reinforcement Bracket for Multi-Clamper (for H Steel) *For more details, please download the PDF or feel free to contact us.

Company：八州電工
Price：Other

Wiring materials
Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Specialized components for bathing facilities and pool equipment (for circulation fittings) - General catalog

For connecting two or more tanks for suction and discharge of bathhouse and pool water.

This is the comprehensive catalog of "specialized components for bathing and pool facilities (for circulation fittings)" from Nihon Leonard Co., Ltd., designed for suction and discharge of water in baths and pools, as well as for connecting two or more tanks. It includes various circulation fittings for bathtub filtration systems such as "bottom circulation fittings CS series, bottom square circulation fittings SK4 series, discharge fittings T4 series, and clamping drainage fittings ULHS series," as well as circulation fittings suitable for hot springs and seawater, including "bottom circulation fittings SSP series, drainage fittings HSP series, discharge fittings with strainer TP/G series, and waterproof plates made of titanium F2Ti series." For more details, please contact us or refer to the catalog.

Company：日本レオナード商会
Price：Other

Piping Materials
filter
Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Installation hardware for privacy lattice fence (exterior materials)

This is a fitting used to install privacy lattice on balcony grids, fences, etc. (for the upper and lower parts of the lattice fence).

This is a multi-type fitting that can securely fasten fences and lattices. If the diameter is 28mm or less, it can be easily connected, making it suitable for various types of wood and more. *We offer further discounts for bulk and large orders. <Note> The U-shaped fitting is designed to be somewhat tight to ensure a secure installation, so some force may be required during installation. If it is difficult, please use tools to widen the U-shaped fitting beforehand. Wholesale of artificial wood products, aluminum products, lattices, louvers, fences, privacy screens, wooden decks, board materials, and installation fixing fittings.

Company：旭興進
Price：Less than 10,000 yen

others
Metal fittings

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Blind lattice fence connection fittings (straight type)

It is a fastening hardware that securely connects fence lattices to each other.

■This is a straight type of fixing hardware that securely connects lattice (fence) panels (screws for installation included). ■For those interested in bulk orders or large orders, please contact us by phone. ■The "lattice fence fixing hardware" is very popular on discount e-commerce sites. Depending on stock availability, there may be cases where immediate shipping is not possible. Please check along with your estimate. Wholesale of fixing hardware for lattice fences for privacy. For more details, please contact us or download the catalog.

Company：旭興進
Price：Less than 10,000 yen

others
Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Angle Adjustable Type Lattice Fence Connecting Fitting (L-Shaped)

It is an L-shaped fixing bracket that allows you to adjust the angle of the connecting fence lattice.

■ Adjustable angle type! You can adjust it to your preferred angle, allowing you to connect fences to fences and lattices to lattices without being limited by location or design. (Includes mounting screws) ■ We accept orders from one piece (small orders) to large quantities (bulk orders). ■ The "connecting hardware" is very popular on budget online shopping sites. Depending on stock availability, there may be cases where immediate shipping is not possible. Please check along with your estimate. Wholesale of artificial wood fences for privacy. For more details, please contact us or download the catalog.

Company：旭興進
Price：Less than 10,000 yen

others
Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Ceiling mounting bracket

Forwarding press

After processing with progressive stamping, surface treatment is performed with trivalent chrome. During the stamping process, beads are added to enhance the strength of the product.

Company：昭和スプリング
Price：Other

Press Dies
Metal fittings

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

U-shaped collapse prevention

Fix the upper and lower units of the stacked furniture to prevent the upper unit from tipping over or falling!

This product is an earthquake-resistant system that secures the upper and lower units of stacked furniture, preventing the upper unit from tipping over or falling. Kawano utilizes its long-standing know-how in aluminum products and meticulous OEM development to support the imagination and creativity of everyone involved in manufacturing. 【Specifications】 ■Material: Steel ■Finish: Zinc plating *For more details, please refer to the PDF document or feel free to contact us.

Company：カワノ
Price：Other

Anti-vibration, earthquake-proof, vibration-isolating devices
Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Hera-shaped products anti-vibration fittings

For anything related to spoon-shaped products, Konno Industries.

Herashibori is a type of sheet metal processing where a mold is attached to a lathe, and while rotating, the metal sheet is processed to fit the mold. Common examples include reflective panels for lighting fixtures and ashtrays, while unique examples include the tip of a rocket and the "bell" that is rung when offering money at a shrine.

Company：今野工業株式会社
Price：Other

Welding Machine
Metal fittings

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Seismic reinforcement hardware

Introducing the seismic reinforcement hardware we handle! We apply surface treatments such as plating, solvent painting, and electropolishing.

Round Monolith Co., Ltd. is a company engaged in precision sheet metal processing, can manufacturing, and painting. We handle "seismic reinforcement fittings" and provide services for cutting, polishing, punching and molding, bending, welding, and polishing and inspection. We use materials such as "SPHC-P," "SUS304-HL," and "SUS304H." Please feel free to contact us when you need our services. 【Processing Methods】 ■ Shearing ■ Deburring ■ Pressing ■ Press Brake ■ Argon Welding / Semi-Automatic Welding ■ Finishing / Inspection *For more details, please refer to the PDF materials or feel free to contact us.

Company：ラウンドモノリス
Price：Other

Contract manufacturing
Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Hexagonal hardware

Transitioning from cutting processing to forging processing to achieve zero chip discharge! Full inspection support is possible!

We handle "hexagonal fittings." By transitioning from cutting processing to forging processing, we achieve zero chip discharge, contributing to environmental conservation. We have a quality assurance system that enables 100% inspection with automatic inspection equipment, achieving zero defective outflow. 【Features】 ■ Transitioning from cutting processing to forging processing to achieve zero chip discharge ■ Contributing to environmental conservation ■ Capable of 100% inspection with automatic inspection equipment, achieving zero defective outflow ■ Quality assurance system ・Non-electrolytic plating of the internal bottom of the female thread, unprocessed threads, and spring washer removal *For more details, please refer to the PDF document or feel free to contact us.

Company：富士セイラ
Price：Other

bolt
Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Counter angle

Three sizes available! Please use them separately or in combination with the counter brackets.

We offer a "Counter Angle" made of steel with a white powder-coated finish. It can be used in situations where counter brackets cannot be used due to installation conditions or when installed on corner walls. We have three sizes available. Please use it in conjunction with or as an alternative to counter brackets. 【Lineup】 ■LY-210 (340) ■LY-210 (390) ■LY-210 (490) *For more details, please refer to the PDF document or feel free to contact us.

Company：株式会社タイメック建材事業部
Price：Other

bracket
Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Directly Attached Ceiling Base Metal Fitting "J-M Fitting"

Introducing flexible and low-cost ceiling system parts that meet your needs!

The "J-M Bracket" is a direct-attachment ceiling substrate bracket that can use conventional lightweight substrate materials, allowing for cost-effective installation of earthquake and wind pressure-resistant substrates. Installation can be performed while checking the marking position through the slit of the base bracket. Level adjustments can be made after temporarily placing the substrate on lip channel steel, just like with conventional lightweight substrates. Additionally, the method of attaching the bracket to the furring channel combines both hook and screw fastening, ensuring safe usage. 【Features】 ■ Flexible & Low Cost ■ Design of non-suspended earthquake and wind pressure-resistant ceilings is possible ■ Easy level adjustment (±10mm from the reference point) ■ Level adjustments can be made after temporarily placing the substrate on lip channel steel ■ Installation can be performed while checking the marking position through the slit of the base bracket ■ The method of attaching the bracket to the furring channel combines both hook and screw fastening for safety *For more details, please refer to the PDF document or feel free to contact us.

Company：森村金属
Price：Other

Other metal materials
Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Architectural Hardware - Sanki Manufacturing Co., Ltd.

We meet various needs for architectural hardware.

Please feel free to consult us about anything from fixed brackets to wedges.

Company：三喜製作所
Price：Other

Processing Contract
Metal fittings

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

ProSeven Seismic Mat / Dedicated Seismic Fittings

Protect equipment and lives from major earthquakes! Why not consider simple and reliable earthquake measures?

The "Pro Seven Seismic Mat" is a special gel (urethane elastomer) that possesses both solid and liquid properties. With excellent flexibility and adhesive strength, it responds to various vibrations. Even in the event of a major earthquake with a seismic intensity of 7, it prevents damage and tipping of important equipment caused by shaking. By using "dedicated seismic brackets" for securing equipment, it demonstrates outstanding effectiveness against earthquakes. 【Features】 ■ Passed seismic intensity 7 tests (with acceleration of 1000 gal or more) ■ Easy installation by simply laying it down, and it is removable ■ Can be cleanly peeled off if removed slowly ■ Responds to shaking in all directions: front-back, left-right, up-down ■ Can be attached to materials that can hold tape *For more details, please refer to the PDF document or feel free to contact us.

Company：東横化学
Price：Other

Other safety and hygiene products
Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Hayatec Suspension Bolt Vibration Stopper Fitting "Gachiri Lock"

Efficient installation of vibration dampers! Suspension bolt vibration damper fittings from the skillful reduced construction series.

The "Gatchiri Lock" is a suspension bolt stabilizing fixture that significantly reduces installation time. It can be retrofitted to existing suspension bolts for stabilization, allowing for one-touch temporary fixing. We offer two types: "one-sided" and "both-sided." Our company is committed to developing new functional products that meet the diverse needs of job sites, free from traditional construction methods. 【Features】 ■ Labor-saving stabilization installation ■ Slide-in with one hand ■ Temporary fixing and height adjustment available ■ Significantly reduces installation time ■ Available in one-sided and both-sided options *For more details, please refer to the PDF document or feel free to contact us.

Company：ネグロス電工
Price：Other

others
Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Delivery example: Mounting bracket for PDP substrate No. DK014-1059

Achieving significant cost reduction by carrying out mold manufacturing and processing completion in China.

By manufacturing molds with local Chinese manufacturers and completing processing at our Chinese factory, we have achieved significant cost reductions compared to conventional products (50% reduction in mold investment costs). [Process] Progressive press (110tW) → Tapping (multi-axis single process) → Single press (bending) → Single press (bending / riveting) → Cleaning → Inspection and packaging → Shipping. For more details, please contact us or refer to the catalog.

Company：大喜金属製作所蘇州大喜金属製品有限公司
Price：Other

Processing Contract
Other metal materials
Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Lockout device "PMD Series"

Installation work for existing control panels is easy! It can be used not only with our products but also with emergency stop switches from other companies.

The "PMD Series" features a structure that allows the metal frame to be "co-tightened" with the switch's fastening nut, eliminating the need to add rivet holes or screw holes for installation on the control panel using drills or similar tools. We offer the "PMD-RC2-D30ADP," compatible with mounting hole sizes of Φ22 to 30, and the "PMD-RC2-D16," designed for small switches (operating part φ30) with a Φ16 size. Installation on existing control panels is straightforward, and it can be used not only with our products but also with emergency stop switches from other manufacturers. 【Features】 ■ Structure that allows the metal frame to be "co-tightened" with the switch's fastening nut ■ No need to add rivet holes or screw holes for installation on the control panel ■ One padlock (lock) and hasp can be installed on each side ■ Usable with emergency stop switches from other manufacturers as well ■ Easy installation on existing control panels *For more details, please refer to the PDF document or feel free to contact us.

Company：マルヤス電業
Price：Other

Safety switch
Other safety equipment
Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Lockout device "PMD Series" <Φ16・22・25・30>

It is possible to easily add a lockout function to the existing emergency stop switch!

The "PMD Series" is a device designed to prevent unauthorized unlocking of emergency stop equipment by third parties, ensuring the safety of operators through the use of padlocks and hasps. Maruyasu Electric Co., Ltd. offers models for mounting holes of φ16, φ22, and φ30, which are compatible with major Japanese manufacturers' emergency stop switches. This product features a structure where the fixture frame is secured with the switch's tightening nut, eliminating the need for additional drilling or screw holes in the control panel, making it easy to implement lockout for emergency stop switches. 【Benefits】 ■ Significantly enhances machine safety and improves operator safety ■ The PMD-RC2-D30ADP can accommodate both φ30 and φ22 emergency stop switches ■ Lockout can be achieved simply by securing it to the switch ■ Contributes to the reliable operation of emergency stop switches ■ The φ16 emergency stop switch can also be easily locked out with the PMD-RC2-D16 ■ Enables cost-effective lockout of existing emergency stop switches *For more details, please refer to the PDF document or feel free to contact us.

Company：マルヤス電業
Price：Other

Work tools
Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Ultra-thin TV wall mount bracket

The ultra-thin arm LED TV mount is a patented product made from aluminum alloy materials with a stylish design. It is the perfect choice for creating space.

The AE211 is a newly developed product, featuring an ultra-thin LED TV mount series with a minimum distance of 35mm from the wall, compatible with VESA 100x100/75x75mm. The ultra-thin arm LED TV mount is a patented product made from aluminum alloy, offering a stylish design. It is the perfect choice for creating space.

Company：高誠
Price：Less than 10,000 yen

LED Module
Metal fittings

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Three-axis hinge ultra-short throw projector wall mount bracket

Compatible with all short-throw projectors.

Highgrade is a specialized manufacturer of mounting brackets for LED TVs, LCDs, plasma TVs, monitor stands, and projector mounting brackets in Taiwan. Since its establishment, Highgrade has been pursuing safety and perfection in its products through unique technologies and designs for which it has obtained patents, and continues to develop. As a result, it has received much acclaim from customers around the world. Our unique technology includes hinge modules and torque adjustment features. The newly announced product, the three-axis hinge ultra-short throw projector wall mount bracket, has an application range of 0.25-0.3 for the PB046B, with a maximum wall distance of 460 mm. It is compatible with all ultra-short throw projectors.

Company：高誠
Price：Less than 10,000 yen

Projector
Metal fittings

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Seismic reinforcement hardware made with bending processing.

Cost reduction is possible because it is made only with bending processing! It is possible to manufacture reinforcement materials for construction without welding!

The "seismic reinforcement hardware" made through progressive bending processing is typically produced only by welding or pressing, but by streamlining the bending process, it has become a building and construction material component that achieves high strength and low cost. With the know-how gained from many years in the automotive industry, we can also manufacture complexly bent hardware. 【Main Applications】 ■ Reinforcement materials for construction and building materials ■ Various automotive parts etc. *Please download the catalog for "progressive bending processing" to view the PDF file.

Company：プレテック本社
Price：Other

Press Dies
Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Flowing Tech Co., Ltd. Hose and Hose Fittings Comprehensive Catalog

We are currently offering a free comprehensive catalog of Flowing Tech's hose fittings and other products!

Flowing Tech Co., Ltd. specializes in the assembly of water, air, and hydraulic hoses, as well as the design and manufacturing of hose fittings used in industries such as chemicals, food, and airports. We are also responding to new demands by developing high-pressure rubber hoses and high-pressure resin hoses using advanced technology. Leveraging the know-how cultivated as a fluid technology company, we provide precise proposals and comprehensive support for our customers' challenges. The comprehensive catalog we are introducing includes a wide range of products, from fuel hoses used for kerosene, light oil, and heavy oil to Japan's first 360-degree rotating cam arm coupling for installation on chemical and food tank product outlets. We invite you to take a look at this opportunity! *For more details, please contact us or refer to the catalog.

Company：フローイング・テクノ
Price：Other

hose
nozzle
Pipe Fittings
Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Wire adjustment hanging bracket Ultima Line Grip

Used as inspection jigs by Shimano, Inc., the world's largest manufacturer of bicycle parts! Proprietary one-touch wire suspension hardware

【Applications】 Installation on lightweight ceilings, installation on slabs, installation on concrete floors, installation on lighting fixture flanges, horizontal installation, installation on frames, installation on wood, etc. 【What makes the Ultima Line Grip different from a standard hanger hook?】 It allows for the secure, compact, and aesthetically pleasing suspension of lighting fixtures using thinner wire, thanks to its robust grip mechanism (which clamps and secures the wire) that differs from conventional wire grips. For more details, please refer to the catalog.

Company：ULTIMA
Price：Other

Other lighting equipment
Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Proposal: Ultima Wire Lock (Stabilizing Wire)

As a wire stabilizer used for lighting and air conditioning equipment, we have a shipping record of over 1 million units. *Individual sales and sales of grip + wire are available.

Ultima's wire grips are widely used as sway braces in equipment installation. Since our establishment, the wire grips used in our products have been designed to meet industry demands and provide grips suitable for those needs. Not only in the construction hardware industry, but also due to their gentle handling of wires and strong gripping power, they are widely used in industrial equipment for wire inspection jigs and in the construction equipment industry. In particular, we have a shipping record of over 1 million units since 1990 as adjustment and fixing hardware for wire sway braces used in equipment for installing lighting and air conditioning fixtures for a certain electrical materials company. In response to numerous requests, the purchasing options have become available as individual grips or combinations of grips and wires. Wires can be selected in 10-meter rolls (for on-site cutting) or as cut wires (1m, 2m).

Company：ULTIMA
Price：Other

others
Anti-vibration, earthquake-proof, vibration-isolating devices
Other lighting equipment
Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Metal fittings Product List and Ranking from 287 Manufacturers, Suppliers and Companies | IPROS GMS

Metal fittings Manufacturer, Suppliers and Company Rankings

Metal fittings Product ranking