Last Updated： Aggregation Period:Sep 30, 2026～Oct 27, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 30, 2026～Oct 27, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 30, 2026～Oct 27, 2026
This ranking is based on the number of page views on our site.
751～780 item / All 964 items
Mounting bracket for Shimoda dragonfly.
This is a mounting bracket for the Shimoda Dragonfly wooden type. Please use it in combination with a wooden type pole. *It cannot be attached to telescopic, fixed, or mini fixed type poles (with an oval cross-section).
The warning sign was installed in just 30 seconds.
■Easily and securely fix your sign! This is a fixture for securing construction notice signs using manhole covers or grates. It can be easily and securely fixed with just one piece, eliminating concerns about tipping over. Since it utilizes the tension of the fixture, no weights are needed, reducing the labor involved in installing the sign.
![[Case Study] Minamisawa Co., Ltd.](https://image.mono.ipros.com/public/product/image/cf7/2001173908/IPROS85298891007155965681.png?w=280&h=280)
Introduction of a case where solar panels were installed flat, considering power generation and heat insulation effects.
We spoke with Minamisawa Co., Ltd. about the purpose and effects of introducing solar panels. The company is committed to achieving the SDGs as a whole. As one of these initiatives, we wanted to utilize the generated electricity for self-consumption to contribute to the reduction of greenhouse gas emissions. To increase the installation area and achieve heat insulation effects, we installed the solar panels flat. Additionally, we proposed solutions considering costs, as we wanted to increase the power generation and hoped to mitigate heat in the second-floor office during the summer. [Purpose of Introduction] ■ To utilize the generated electricity for self-consumption and contribute to the reduction of greenhouse gas emissions. ■ To aim for the realization of a carbon-neutral company as early as possible. *For more details, please refer to the PDF document or feel free to contact us.
Install in 3 seconds with one hand! No need for power tools, reducing the burden on the worker!
The "C Quick Fitting" is a flat steel plate fixing fitting that does not require tightening bolts like conventional methods, eliminating the need for fastening tools such as electric tools. It is equipped with a "lock function" to prevent disconnection. Along with preventing loosening and disconnection, it allows for easy confirmation of the fixed state, helping to prevent forgetting to tighten. It can be installed quickly with "one action for fixing" and "two actions for disconnection prevention lock." 【Features】 ■ Easy installation without tools ■ Lock function to prevent loosening ■ Clear tightening confirmation check at a glance ■ Increased work speed without screw tightening ■ Ensures worker safety with one-handed operation *For more details, please refer to the PDF document or feel free to contact us.
Delivery with pre-assembled fittings reduces construction time! Solar panel mounting brackets that do not require drilling holes in the roof.
The "Horizontal Roof Mounting Bracket" is a mounting bracket for solar panels that can be used on horizontal roofs. With fewer components and the brackets shipped pre-assembled, there is no need for detailed assembly work on-site, allowing for smooth installation. Additionally, it can be installed without making holes in the roof, eliminating concerns about leaks. ★ Since its release three months ago, it has received high praise from many customers! 【Features】 ■ Supports a maximum vertical snow load of 200 cm ■ Supports a maximum wind speed of 38 m/s ■ Compatible with a wide range of working widths using two types of racks ■ Made of aluminum and stainless steel for rust resistance ■ Complies with the new JIS standards *For more details, please refer to the documentation. A list of compatible roofs is also available for download.
Can be installed simultaneously with the eaves cover. Just drive the screws in from above the cover. The appearance is also a beautiful finish.
Our company manufactures mounting systems for solar power generation. We also offer a "sliding snow stop bracket" that is useful in situations where snow falling onto neighboring houses is a concern, such as in densely populated residential areas. This product can be installed simultaneously with eaves covers, maintaining the appearance of the building while allowing for easy and speedy installation. Additionally, when combined with intermediate snow stop brackets, it effectively suppresses snow sliding. 【Features】 ■ 25-year product warranty ■ Balances functionality and aesthetics of snow stopping ■ Easy installation by simply driving screws from above the cover ★ Product brochures and installation manuals are currently available! For more details, please check "PDF Download."
Featuring options like 'Sunrock Grip II Plus' that can accommodate a board thickness of 0.35mm!
This catalog features gripping hardware handled by Eishin Co., Ltd. We introduce various products including the "Sunrock Grip II Plus," specialized for rolled edges, and the "Horizontal Gripping Hardware," which accommodates a wide range of working dimensions with two types of racks. [Contents] ■ Sunrock Grip II Plus ■ Horizontal Gripping Hardware ■ One Catch ■ Tile Bar Type 1 ■ Fixed Hardware (M)/(P) ■ Compatibility Table *For more details, please refer to the PDF document or feel free to contact us.
No need to remove the tiles! The new tile rackless fixture "Kawara Danjiro" has arrived!
"Wadadanjirō" is a rackless mounting bracket that allows for the installation of solar panels on tile roofs without the use of vertical racks. Being rackless not only reduces construction time but also cuts costs and weight! Since there is no need to remove the tiles like with conventional tile mounting brackets, installation can be done without being affected by the mandatory tile fastening required by guidelines. The special structure reduces the load on the tiles! It is well-suited for the solar industry. Please feel free to consult us when needed. 【Features】 ■ Overall weight and cost reduction due to no use of vertical racks ■ Installation possible without removing tiles ■ Installation possible without being affected by tile fastening ■ Reduced construction time ■ Well-suited for the solar industry *For more details, please refer to the related links or feel free to contact us.
Neatly install your TV with wall-mounted brackets. Compatible with VESA standards for easy one-touch installation. Please consider it as an earthquake prevention measure as well.
◎Proposal◎ In Japan, where earthquakes frequently occur, various earthquake countermeasures such as safety measures for furniture and appliances, as well as anti-tipping measures, are being implemented. Even when considering just one aspect of anti-tipping, many people may have adopted support rods to prevent shelves from tipping over as a standard countermeasure. The product, TV wall mount NTK-05, is increasingly being considered by those looking to implement anti-tipping measures for televisions. In fact, we have received inquiries from hotel staff stating, "A freestanding television in a guest room tipped over during an earthquake, so we would like to change it to a wall-mounted setup as a countermeasure." Many may associate wall mounting with a more spacious use of space, but we encourage you to consider our original product, the TV wall mount NTK-05, from a safety perspective as well. At Horie Hardware, we not only handle furniture and architectural hardware such as nuts, screws, knobs, handles, and slide rails, but we also offer LED products. Additionally, our partner factories both domestically and internationally are actively engaged in the production of custom items and the development of new products using advanced metal and resin processing technologies. If you are looking for a specific product, please feel free to contact us.
Discreet and reassuring! Can be easily installed on storage furniture and kitchen sliding doors.
The "PFR-HT" is a seismic-resistant hardware for sliding doors that detects shaking during an earthquake and prevents the door from opening. The lock activates at a seismic intensity of 5 or higher. Once the shaking subsides, the lock automatically releases, allowing the sliding door to be opened and closed. The main unit is installed at the top of the cabinet, so it does not interfere with the storage and retrieval of items. 【Features】 ■ Detects shaking simultaneously with an earthquake to prevent the sliding door from opening ■ The lock automatically releases as soon as the shaking subsides ■ Does not interfere with the normal opening and closing of the sliding door ■ Used in conjunction with our original damper function (HDC) ■ Lock activates at a seismic intensity of 5 or higher *For more details, please refer to the PDF document or feel free to contact us.
During an earthquake, instantly lock the drawer! It is effective for seismic intensity of 5 or higher.
The "PFR-QS2/PFR-QD" is an earthquake-resistant fitting for drawers that prevents them from opening during an earthquake. The locking mechanism activates during vibrations ranging from small, rapid shakes to larger, slow sways (up to seismic intensity 5 weak). When the earthquake subsides, the lock is automatically released. Additionally, it does not interfere with the normal opening and closing of drawers. 【Features】 ■ Locks drawers during an earthquake ■ Effective for seismic intensity of 5 weak or higher ■ Does not interfere with normal drawer operation ■ Earthquake-resistant fitting is inconspicuous (PFR-QS2) ■ Easy installation without special tools (PFR-QD) *For more details, please refer to the PDF document or feel free to contact us.
![Frame support and frame hanging hardware [Cushion for frame support] <Polyester>](https://image.mono.ipros.com/public/product/image/926/2001261902/IPROS10649170633322533006.png?w=280&h=280)
For decoration between the frame and the frame support! 【Cushion for frame support】
We would like to introduce our framed art supports and hanging hardware, specifically the "Cushion for Framed Art Supports." ■ Available in luxurious and eye-catching red and purple ■ Sizes - Small - Medium - Large - Extra Large - 150 mm ■ Colors - Red - Purple We also offer weight-rated framed art supports and hanging hardware. Please feel free to contact us if you have any inquiries.
![Single pipe driving fitting [hammering - large]](https://image.mono.ipros.com/public/product/image/d05/2000248464/IPROS331147694510896129.jpg?w=280&h=280)
No deformation of the single pipe even with powerful strikes! With a large target of 60mm, it ensures accuracy! It adopts a tapered structure that efficiently transmits striking force.
By enlarging the striking area, it is designed to make it easier to hit with a hammer. The supporting side below can work with peace of mind. You can confidently and powerfully drive in Skat 91 or single pipes with a hammer! 【Features】 ■ Outer diameter Φ48.6, thickness 2.4mm specification ■ The target is large, making it easy for the hammer to hit ■ Fewer mis-hits with the hammer, providing reassurance for the person supporting ■ The heads (striking parts) of single pipe piles [Skat 91] and single pipe do not deform ■ Single pipes can also be driven in directly ■ No rebound during striking ■ Treated with hardening processing for long-term use *For more details, please download the PDF or feel free to contact us.
![New Model: Single Pipe Pile [Scat 91]](https://image.mono.ipros.com/public/product/image/d79/2000248465/IPROS4933718720326826449.JPG?w=280&h=280)
A single pipe pile that can be freely extended in length according to the ground and site conditions! Suitable for both manual driving with a hammer and machine driving!
A convenient single pipe pile that can be easily extended to various lengths according to the ground and site conditions! The "Skat 91" comes in three lengths: 1.0m, 1.5m, and 2.0m. By connecting these three types with various lengths of single pipe using our "Tsunagood," you can create single pipe piles of various lengths on-site, accommodating different ground conditions and site environments. Additionally, not only can it be machine-driven, but using our "Tataka (large, medium, small)" allows for driving without deforming the single pipe with a hammer. In any scaffolding environment, you can always keep both feet on the ground and safely drive long single pipe piles alone, enhancing safety and work efficiency while achieving cost reduction. 【Product Features】 - Eliminates the striking part, achieving lower costs for single pipe piles. - Using "Tsunagood" ensures it reaches the support layer reliably. - Various uses can be achieved by attaching rope fittings to the single pipe pile. - Extend! Connect! Pull! Stand up! The convenience of single pipe piles is enhanced. *For more details, please download the PDF or feel free to contact us.
Safe for one person! Quickly drive in stakes of any length, and they are reusable!
The single pipe joint was born from the urgent desire of construction sites to drive long stakes safely and easily. It can securely connect the single pipe stake "Scat 91," allowing for deep driving! It connects so firmly that it can be removed as a single stake even after being pulled out. With "Tsunagood," you can extend the length of the stake while maintaining strength, adapting it to the ground conditions and site situation. Since it is a completely internal joint type, there are no protrusions to interfere with driving. ~ Features of the connection fitting "Tsunagood" ~ ■ Outer diameter φ48.6, thickness 2.4 mm specification ■ The length of the stake "Scat 91" can be extended according to ground conditions. ■ You can safely drive stakes alone with both feet always on the ground, regardless of the construction situation. ■ No need for a standing horse or ladder, no matter how long the stake is. ■ It can be reused. * For more details, please download the PDF or feel free to contact us.
![Connection fittings for securely joining single pipes [Massgood - Straight type]](https://image.mono.ipros.com/public/product/image/412/2000251793/IPROS8169980809630254622.jpg?w=280&h=280)
It is a single pipe joint that connects single pipes more securely as if they were one solid piece.
The "Massgood Straight Type" connects single pipes firmly and straight with fewer components. Even when bolts are tightened, the single pipes do not deform, and there is no loosening, play, or settling at the connection points. ~Features of the Connection Fitting [Massgood Straight Type]~ ■ There are two types available: for single pipes with an outer diameter of 48.6mm and a thickness of 2.4mm, and for those with an outer diameter of 48.6mm and a thickness of 1.8mm. ■ There is no loosening, play, or settling at the connection points. ■ Connects more quickly and firmly straight with fewer components, allowing one person to do it. ■ High-tension bolts are used. ■ The single pipes do not deform even when the bolts are tightened. *For more details, please download the PDF or feel free to contact us.
Easy to install! Simply insert it into the single pipe stake, tighten the eye bolt, and secure it with a nut to easily tension ropes or chains!
The "rope fittings" for single pipe posts come in two types: the S type with a ring on one side and the W type with rings on both sides. Installation is simple; just insert it into the single pipe post, tighten the eye bolt, and secure it with a nut. This allows for easy tensioning of various ropes and chains, enabling a wide range of applications for single pipe posts. ~ Features of the easy-to-install "rope fittings" for single pipe posts ~ ■ Easy to install by simply tightening the eye bolt and securing it with a nut. ■ Available in two types: S type with a ring on one side and W type with rings on both sides. ■ Specifically designed for our single pipe posts "Shinko no Kui" and "Scat 91." ■ Can accommodate commercially available plastic chains, tar ropes, and steel chains. *For more details, please download the PDF or feel free to contact us.
![Single pipe piles that can be driven into hard ground [Shinko Piles]](https://image.mono.ipros.com/public/product/image/dfa/2000298859/IPROS587718669038417698.JPG?w=280&h=280)
Both the striking part and the tip are tapered structures, making it a durable single-pole pile that can be reused!
Three Features of the Reusable Single Pipe Pile "Shinko no Kui" ■ Sturdy Driving Section with Tapered Structure By adopting a tapered structure, the strength of the single pipe pile is enhanced, resulting in a pile that does not deform or settle due to impact. ■ Use of 20mm Machined Material and Full Circumference Welding on the Driving Section The driving section uses 20mm thick machined material and is fully welded, making it a highly durable single pipe pile. The top has a flat surface, making it easy for a hammer to strike, allowing for secure driving. ■ Use of Conical Machined Material and Full Circumference Welding on the Tip The tip uses a pointed conical machined material, enabling the single pipe pile to be driven into hard ground. Additionally, - It can be easily installed by simply tightening the eye bolt and securing it with a nut. - Available in two types: S type with a single side ring and W type with double side rings. - Our single pipe pile "Shinko no Kui" is a dedicated product for the single pipe pile "Scat 91." - Compatible with commercially available plastic chains, tar ropes, and steel chains. *For more details, please download the PDF or feel free to contact us.
Compatible with thick furniture doors with a stroke of 27.5mm!
"ECONO Catch" is a closing hardware that allows for a flat door design without the need for knobs or handles. It features an adjustment mechanism that allows for front and back adjustments even after installation. Additionally, the push release amount is 1.5 to 2.0 mm, minimizing the gap of the door. 【Lineup】 ■YJ-EKB (Black) ■YJ-EKW (White) *For more details, please download the PDF or feel free to contact us.
Achieve a comfortable lifestyle! Motion control technology embedded in small fittings.
We developed a kitchen storage shelf at the request of Company T. The doors can be easily moved up and down with just one finger, and the springs and brakes maintain a perfect balance, allowing them to stop at any desired position. Additionally, at the request of Company P, we developed handrails that can be directly attached to toilets. When not in use, they can be fixed in an elevated position, and when needed, they can be slowly lowered. Our company aims to refine "motion control technology" and create a society filled with comfort and consideration. We also showcase other examples on our website, so please take a look. 【Case Studies】 ■ Up and Down Slide ■ EG Bed Fittings ■ Theater Chairs ■ Armrests ■ Pivot Hinges *For more details, please refer to the related links or feel free to contact us.
Ceiling-mounted arm with a fixed height of 12 inches (30.48 cm) for sealing pipes. Tilt range up to 180°, swivel up to 360°.
ICWUSA's "UL500i Series" Ceiling-Mounted Monitor Arm from the United States The two-joint VESA bracket allows for significant adjustment of the display's tilt angle. - Load capacity: 8.2 kg - Fixed to the ceiling with an 8" x 8" (20.32 cm x 20.32 cm) plate - Other lengths of ceiling pipes are also available. *For more details, please refer to the external link page or feel free to contact us.
It is a mechanical component primarily designed for locking doors and covers.
It is a locking mechanism for a padlock.
It is a mechanical component primarily designed for locking doors and lids.
This is for flat mounting of the catch clip.
It is a mechanical component primarily intended for locking doors and covers.
This is for corner installation of the catch clip.
12×8×8L=40 L type and 12×9×9L=40 with wings! Available in various sizes.
Our company leverages the manufacturing know-how of our original product "OK Con" and has achieved results in insert molding. The salt damage countermeasure "OK Long P Con" is available in various sizes, including 12×8×8L=40 L type and 12×9×9L=40 with blades. In addition, we also offer "D type P Con" and "Iron Con." 【Product Lineup】 ■ Long P Con for salt damage countermeasures (w5/16, w3/8) ■ Long P Con N.type 30φ for salt damage countermeasures (w5/16, w3/8) ■ Long P Con for beams (w5/16, w3/8) ■ Long P Con for salt damage countermeasures (w1/2, w5/8) ■ D type P Con (w1/2, w5/8) ■ Iron Con (w1/2, w5/8) *For more details, please refer to the PDF document or feel free to contact us.
We have 12 press machines ranging from 20 tons to 80 tons, and you can leave everything from processing to surface treatment and assembly to us.
Our company does not just perform press processing and deliver parts; we manage processes such as barrel plating, coating, assembly, and resin assembly, and conduct inspection and packaging in-house to provide you with "products." 【Our Processing Technologies】 ◇ Progressive Press Processing We have 12 press machines ranging from 20t to 80t, which is our main processing method. ◇ Multi-Forming Processing This method has good material yield and is advantageous for materials like leaf springs that utilize the width of the material. ◇ Single-Stage Press Processing We finish molds quickly to accommodate prototypes and small lots. ◇ Various Assemblies We procure materials as much as possible and assemble multiple parts into finished products. *For more details, please contact us or download the catalog.
Lightweight without the need for a base material! Excellent workability and even higher strength inclined support brackets.
The "SK Frame" is a high-strength inclined support bracket that does not require a base material and offers excellent workability. It adopts a triangular frame structure with an incline angle of 10°, and the base frame is hat-shaped, which disperses the load and provides outstanding stability. It is compatible with both "flow incline" and "orthogonal incline," allowing you to choose from two types of construction methods. 【Features】 - No base material required, lightweight, and improved workability - Fewer components result in shorter delivery times - Two types of construction methods (flow incline and orthogonal incline) - Excellent stability and robust frame structure *For more details, please refer to the PDF document or feel free to contact us.
Snow prevention brackets for solar panels that prevent snow from falling off vigorously! By gradually shedding snow, it suppresses snow sliding, snow accumulation, and icicle formation!
The snow stop hardware "Snow Truss," developed specifically for solar panels, prevents sliding snow from the glass surface of solar panels, which are prone to snow sliding. The snow that is caught is finely divided by a net, gradually releasing the snow to suppress the occurrence of snow avalanches, snow drifts, and icicles. While the image may be that "snow stops = snow country," this product is particularly recommended for areas where snow only falls once every few years. ● Avalanche Prevention Prevents sliding snow from solar panels and suppresses the occurrence of snow avalanches, snow drifts, and icicles. ● Snow Damage Prevention Prevents troubles caused by falling snow (such as damage to neighbors' carports or vehicles). ● Height Increase Body height is 205mm. It effectively catches sliding snow from solar panels. ● Compact Design Can be installed in small spaces at the eaves (minimum installation area of 150mm). ● Compatible Roofs Horizontal roofing / Fitting type standing seam / Tile rods (without core wood) / Decorative slate / Flat tiles *For details, please request materials or view the PDF data from the download.
High-quality fittings from Swallow Industries featured with photos! A catalog packed with specifications and strength information.
The "Snow Stopper Hardware, Gutter Hardware, and Folded Plate Hardware Product Catalog" features a wide range of hardware products from Swallow Industry, a specialized manufacturer focused on roofing-related businesses. Products are categorized into "Snow Stopper Hardware," "Gutter Hardware," and "Folded Plate Hardware." The catalog provides detailed specifications for each product, including materials, finish colors, quantities, and socket sizes (tightening torque). An indexed format with photos makes it easy to find products. [Contents] ■ Snow Stopper Hardware ■ Gutter Hardware ■ Folded Plate Hardware ■ Others *For more details, please refer to the catalog. Feel free to contact us with any inquiries.
