Last Updated： Aggregation Period:Jul 16, 2025～Aug 12, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jul 16, 2025～Aug 12, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jul 16, 2025～Aug 12, 2025
This ranking is based on the number of page views on our site.
106～120 item / All 461 items
Lightweight due to being made of aluminum.
Surface treatment: Anodizing High corrosion resistance Obtained AS/NZS1170 and SGS certifications.
Molded from aluminum alloy - excellent waterproofing and weather resistance - high workability and safety.
• The main structure was calculated and comprehensively analyzed using the architectural software SAP2000. • To ensure the strength of the main body, the main parts were tested through tensile tests and load tests. • Customization is possible according to conditions such as wind force, snow load, and seismic force based on the JIS C 8955:2011 standard. • The frame is made of aluminum alloy (6005-T5), and the screws are made of stainless steel (SUS304), providing greater strength. • The surface of the frame has a 7um anodized treatment and a 7um acrylic coating, offering good weather resistance. • The structure of the frame is simple, making on-site construction easy and allowing for cost savings in construction. • The frame is designed for high versatility and can accommodate various types of solar panel modules.
We provide various pipes primarily made of brass, including water faucet fittings and automotive parts, to our customers!
Our company provides various pipes primarily made of brass, including faucet fittings and automotive parts, to our customers. In addition to the spouts used in kitchens, we continue to produce essential products for everyday life, such as faucet pipes, towel racks for thermostats, pipes used in engine oil components, and handrails. [Features] - Spouts used in kitchens - Faucet pipes and towel racks for thermostats - Pipes used in engine oil components - Production of essential products for everyday life, such as handrails *For more details, please refer to the PDF document or feel free to contact us.
A lineup of over 2000 access hardware products using various materials.
The lineup of access hardware products from Essentra Components Japan Inc. is designed for a wide range of applications, including cabinets/enclosures, machinery, generators, and HVAC units. We offer over 2,000 access hardware products made from various materials such as plastic, steel, stainless steel, and aluminum to meet your design requirements. 【Product Lineup】 ○ Hinges ○ Locks ○ Compression Locks ○ Latches and Catches For more details, please contact us or download the catalog. *This catalog is a digest version. If you need the full version, please contact us.
A place for people to gather and converse! Easy and affordable geometric dome hardware that you can assemble yourself.
The "hitode bracket" is a geometric dome fixture made from a spring-like stainless material that maintains a dome shape through elasticity. It is designed to visually indicate the position and length of wood alignment based on the shape of the tip and the presence or absence of holes. We developed this product to provide a space where people can gather in the dome and enjoy a fun time together. 【Features】 ■ A design that visually indicates connections ■ Does not collapse due to spring-like material ■ Maintains dome shape through elasticity ■ Ensures a certain level of strength *For more details, please refer to the PDF document or feel free to contact us.
Easily and reliably press-fittable into the base resin! It is used to secure resin products such as automotive interior materials.
"Fit Color" is a product developed to solve various problems that arise when attaching resin with screws and other fasteners. It protects the resin during tightening while preventing loosening through proper torque (metal touch) and absorbs discrepancies during the installation of resin products and the main body, allowing for proper installation. Additionally, after press-fitting the resin, it has a structure that prevents falling, ensuring there is no detachment during transport or while waiting. 【Features】 ■ Can be easily and securely press-fitted (fixed) into the resin of the base material ■ Usable with almost all types of hard resin ■ No detachment during transport, delivery, or on the production line after press-fitting ■ As a recyclable product, it completely separates the resin (base material) and the collar (metal) *For more details, please refer to the PDF document or feel free to contact us.
No processing of roofing materials is required. Installation of solar modules is streamlined without using racks. Compatible with a wide range of regions.
The "Tile Bar Type 1" is a gripping fixture designed for installing solar modules without the need for wooden battens. It can be installed without drilling holes in the roofing material, and since it does not require a rack, installation is easy and smooth, which is an added benefit. It can accommodate a maximum vertical snow load of 200 cm and wind speeds of up to 46 m/s, making it suitable for a wide range of regions. 【Features】 ■ Made from corrosion-resistant aluminum and stainless steel ■ Compatible with medium dimensions of 33 mm width ■ Complies with JIS C 8955:2017 ■ Product warranty of 25 years *For more details, please refer to the materials. Feel free to contact us with any inquiries.
Just tighten one bolt from the top. Easy installation and securely fixed. Lightweight with aluminum alloy.
The "Sunrock Grip II" is a mounting bracket for solar panels that is compatible with both standing seam and corrugated roofs. It accommodates seam heights of up to 35mm and can be used with a wide range of roofing materials. Installation is quick and easy, requiring only the tightening of a single bolt from above. There is also the "Sunrock Grip II Plus," which is equipped with anti-slip fittings for rolled seam roofs. 【Features】 ■ Lightweight due to aluminum alloy construction ■ Compact design for low cost ■ Easy installation with position adjustment function (module stopper) ■ Compatible with 2m of snow load
Easy installation above furniture and kitchen doors! Introduction of earthquake-resistant hardware for swinging doors.
The "PFR-TSA/PFR-TSAα" is an earthquake-resistant hardware for swinging doors that demonstrates its effectiveness instantly during an earthquake. When an earthquake occurs, a sensing sensor detects the shaking immediately and prevents the door from opening. Once the earthquake subsides, the lock is automatically released. It operates silently, minimizing noise during regular door opening and closing, so it does not become a nuisance. 【Features】 ■ Locks the door upon detecting shaking simultaneously with the earthquake ■ Automatically releases the lock as soon as the shaking subsides ■ Can be used without stress during regular door opening and closing ■ The latch receiver is automatically adjustable ■ The lock activates at seismic intensity of 5 or higher *For more details, please refer to the PDF materials or feel free to contact us.
![Single pipe driving fitting [hammered, medium]](https://image.mono.ipros.com/public/product/image/02a/2000248494/IPROS5796843977666870807.JPG?w=280&h=280)
The tapered structure transmits strong impact force to the single pipe and prevents deformation of the single pipe. It can also be reused!
The "TatakI - Medium" has undergone heat treatment on the striking part to prevent deformation, and its tapered structure transmits strong impact force to the single pipe, preventing deformation of the single pipe through a fitting that matches the inner diameter of the pipe. When driven with a hydraulic breaker, it can drive in 150 to 250 pieces! ~ Features of the Single Pipe Driving Tool "TatakI - Medium" ~ ■ Outer diameter Φ48.6, thickness 2.4mm specification ■ The head of the single pipe pile [Scat 91] and the single pipe (striking part) do not deform. ■ It prevents deformation of the head (striking part) due to the powerful driving of the hydraulic breaker. ■ There is no rebound during impact. ■ It is heat-treated, allowing for long-term use. ■ It is also used for driving [Scat SP] and [Scat SF]. *For more details, please download the PDF or feel free to contact us.
![Single pipe driving fitting [hammering, small]](https://image.mono.ipros.com/public/product/image/2ea/2000248500/IPROS257822353951931169.JPG?w=280&h=280)
Durability that can withstand over 1000 strikes! Even though it's small, it can drive multiple single pipes! Repeated use is also possible!
The "Small Hammer" features a tapered structure that effectively transmits impact force to the single pipe. It is primarily used for the installation of our Skat SP parking stops, which are removable. Our testing has shown that it can withstand over 1,000 strikes without issue. ~ Features of the Single Pipe Driving Tool "Small Hammer" ~ ■ Outer diameter Φ48.6, thickness 2.4mm specification ■ The heads (impact areas) of single pipes and single pipe stakes (Skat 91) do not deform. ■ It does not bite into the single pipe. ■ Can be used repeatedly. ■ Also used for driving Skat SP and Skat SF. *For more details, please download the PDF or feel free to contact us.
Create a flat door without the need for knobs or handles!
The "ECONO Lock" is a closing hardware that can accommodate thick furniture doors with a stroke of 26.5mm. It achieves a robust lock with a door pull resistance value of 20kgf when locked. The adjustable hinge allows for door adjustments within a range of ±3mm in all directions. 【Lineup】 ■YJ-ELB (Black) ■YJ-ELW (White) *For more details, please download the PDF or feel free to contact us.
A simple design that maximizes the beauty of door design!
The "pivot hinge" allows for the easy attachment and detachment of doors simply by pulling a pin from below, eliminating the hassle during installation. Unlike traditional hinges, it can be adjusted while the door is closed. Additionally, it can be used for larger gap settings under the door due to its vertical frame installation. 【Features】 ■ Simple design ■ Easy installation ■ 3D adjustment mechanism ■ Vertical frame installation *For more details, please download the PDF or feel free to contact us.
Improved construction efficiency with a catch-and-direct method that does not create holes in the roof! This is a solar panel mounting system that eliminates racks and allows for a sleek appearance!
The solar panel mounting system "D-SWAT" allows for the installation of solar power generation systems without making holes in the roof, thanks to its adoption of a catch method. It standardly employs a newly developed direct method, eliminating the need for vertical and horizontal racks, which improves construction efficiency by directly securing and connecting the product to the modules. Additionally, by omitting racks with the direct method, the height from the roof surface to the module surface is minimized, resulting in a sleek appearance. 【Features】 ■ Hole-free roof surface ■ Increased efficiency ■ Smart design *For more details, please refer to the PDF document or feel free to contact us.
Overwhelming construction speed. Place it, tighten it, that's it.
"Fitting Hyper Lock" is a snow stop bracket compatible with flat roofs. It adopts a footed structure that pursues workability and stability, significantly improving work efficiency and leading to a reduction in construction time. Due to its lightweight and compact design, it is easy to transport on construction sites, allowing for smooth installation. You can choose from various colors to match the appearance of the roof. [Features] - Improved work efficiency - Reduced construction time - Lightweight and compact - Smooth installation *For more details, please refer to the PDF document or feel free to contact us.
