Last Updated： Aggregation Period:Oct 22, 2025～Nov 18, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Oct 22, 2025～Nov 18, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Oct 22, 2025～Nov 18, 2025
This ranking is based on the number of page views on our site.
1261～1275 item / All 1789 items
Fully compliant with the technical standards due to the enforcement amendment of the Road Transport Vehicle Act.
Easy to move to the measurement location with an integrated caster cart. Light transmission black smoke meter.
A dual-type device that can measure both contact and non-contact! An inspection instrument that consolidates rotational measurement technology.
The "HT-5500" is an easy-to-use, high-performance handheld tachometer that can be used for both contact and non-contact measurements. It combines advanced rotational measurement technology with a sophisticated body fully equipped with features. It comes standard with both analog output and pulse output; the analog output is for recording purposes with data recorders, while the pulse output can be used as a tracking analysis signal for FFT analyzers. 【Features】 ■ Dual-use type that can measure both contact and non-contact ■ Memory function allows for saving up to 20 data points ■ Capable of counting accumulated rotations ■ Standard equipped with analog output and pulse output ■ Hold function for maximum and minimum values of rotational speed, period, and circumferential speed *For more details, please refer to the PDF document or feel free to contact us.
Many measurement items! A user-friendly and high-performance handheld type that can be used for both contact and non-contact measurements.
The "HT-5100" is a wide-range tachometer capable of measuring from 6 to 99,999 r/min. The measurement items include cumulative count, linear speed (m/min), period (msec), and rotational speed (rpm/rps), among others. It features analog output (HT-5100) and pulse output (HT-5200), allowing for connection to data recorders. Additionally, it combines advanced rotational measurement technology with a sophisticated body that is fully equipped with functions. It is a user-friendly and high-performance device that can be used for both contact and non-contact measurements. 【Features】 ■ Dual-use type that can measure both contact and non-contact ■ Capable of counting cumulative rotational speed ■ Equipped with analog output (HT-5100) ■ Usable with AC power (when using AC adapter PB-703) ■ Hold function for maximum and minimum rotational speed, memory recall function, alarm function *For more details, please refer to the PDF document or feel free to contact us.
Utilizing the property of absorbing blue light and emitting red light (fluorescence).
The fluorescence intensity generated in accordance with the concentration of chlorophyll in the living cells of phytoplankton can be measured directly.
A portable conductivity meter with anti-slip processing, easy to hold with one hand and convenient for use on-site.
This is a notice from Rex Co., Ltd. regarding the "portable conductivity meter sensION5."
Made of special lightweight alloy, easy to handle.
The air content measuring device for fresh concrete allows for easy direct reading operation, enabling accurate testing.
Standard scintillation survey meter
This is a standard scintillation survey meter using a NaI(Tl) scintillation detector with a diameter of 1 inch and a length of 1 inch. It is ideal for measuring dose rates of gamma rays and X-rays.
Portable radiation measurement equipment for responding to radioactive material disasters within NBC disasters.
The RadEye G-10 enables the measurement of cumulative dose values as a personal dosimeter and dose rate measurement as a radiation measurement device. It supports a wide gamma-ray measurement range from 0.05 μSv/h to 100 mSv/h, providing quick and highly reliable measurement data.
Energy compensation dose and dose rate measurement up to a maximum of 100 mSv/h (or 10 rem/h) is possible.
The RadEye PRD-ER is a device with superior response compared to similar equipment, enabling energy-compensated dose and dose rate measurements of up to 100 mSv/h (or 10 rem/h) thanks to its unique circuitry.
Adopting a silicon resonant sensor, we have achieved compactness, lightweight design, and high reliability!
The MT-10(265303) is a mini manometer that achieves compactness, lightweight design, and high reliability. It uses a silicon resonant sensor that has won the Okouchi Memorial Prize and the Keidanren Chairman's Award for pressure measurement. The detection part employs single crystal silicon, which offers superior reproducibility compared to conventional metal sensors and allows for stable measurements due to minimal aging changes. For more details, please contact us.
Energy compensation type scintillation survey meter
TCS-172B is an energy-compensated type scintillation survey meter. It can switch between dose equivalent rate (μSv/h) and counting rate (s^-1 = cps). The dose equivalent rate mode is used for measuring environmental gamma radiation dose equivalent rates, while the counting rate mode can be used for iodine measurements in emergencies. In the case of dose rate measurements, due to the built-in energy compensation circuit, raw counting values are displayed without using calibration constants. For more details, please contact us.
It is an in-situ horizontal loading test device designed for soft rock to hard rock.
Understanding the stress and deformation characteristics of the ground is extremely important for the foundation design of large structures, high-rise buildings, or dams and bridges. The "Elastometer 2" is an in-situ horizontal loading test device that enables the measurement of these stress and deformation characteristics across a wide range of rock types, from soft rock to hard rock. The Elastometer HQ probe integrates various functions, improving accuracy and operability. Data is automatically recorded by the "Elastologger 2," and data printing on-site is also possible. Additionally, the "Elastologger 2" is compatible with the conventional Elastometer 2 probes. For more details, please contact us.
With a digital display, measurements can be taken easily and accurately without individual reading errors.
The KS-221 uses a load cell to measure penetration load, and the penetration load value can be read on a digital display. Therefore, there is no need for calculations based on calibration values, and measurement accuracy is sufficiently secured at ±1%. Additionally, with conventional analog load gauges, accurate measurements were difficult due to the needle's jumping and swaying on the dial gauge, but this product can be easily and accurately measured without individual reading errors, as it only requires reading the digital display. For more details, please contact us or refer to the catalog.
It is an innovative shape measuring device that instantly measures area and line length and displays the results digitally.
The PLANIX5000 is an innovative shape measuring device that detects the coordinates of measurement shapes through a completely new mechanism and built-in computer, instantly measuring area and line length for digital display. For linear shapes, the point mode function allows for simultaneous measurement of area and line length by simply plotting each vertex, while for curved shapes, the stream mode function enables simultaneous calculation of area and line length. Additionally, it is equipped with numerous advanced features such as arithmetic calculation functions, memory functions, and high precision with a line resolution of 0.05mm. 【Features】 ○ Simultaneous measurement of area and line length ○ Point mode that changes the measurement process ○ Smooth stream mode for curved shapes For more details, please contact us.
Integrated infrared thermal camera! Two-in-one humidity meter!
Using the built-in infrared thermal camera, you can identify cold spots and find areas with high humidity. By utilizing the meter's pin and pinless humidity measurement functions, you can check the actual humidity levels. In addition to displaying thermal images and humidity readings on a single screen, it is also possible to generate reports using the free software "FLIR Tools." 【Features】 - Built-in infrared thermal camera - Measurement of relative humidity by pressing the moisture sensor on the back - Robust compact design with a rechargeable built-in battery for convenient portability wherever needed - Humidity measurement possible with an external probe For more details, please contact us.
