Molding Line - メーカー・企業10社の製品一覧とランキング

更新日：Oct 29, 2025 集計期間:Oct 01, 2025～Oct 28, 2025
※当サイトの各ページの閲覧回数を元に算出したランキングです。

Molding Lineのメーカー・企業ランキング

更新日：Oct 29, 2025 集計期間:Oct 01, 2025～Oct 28, 2025
※当サイトの各ページの閲覧回数を元に算出したランキングです。

バッテンフェルト・シンシナティ日本支社 Kanagawa//Industrial Machinery
英田エンジニアリング Okayama//Industrial Machinery
山本鉄工所 Tokushima//Industrial Machinery
4 南陽 Kanagawa//Industrial Machinery
5 アイ・ケー・ジー Tokyo//Industrial Machinery

企業ランキングへ

Molding Lineの製品ランキング

更新日：Oct 29, 2025 集計期間:Oct 01, 2025～Oct 28, 2025
※当サイトの各ページの閲覧回数を元に算出したランキングです。

Pallet molding line (extruder, injection molding machine, molding machine, welding machine) 山本鉄工所
Fully automate extrusion molding! Fully automatic extrusion molding line. バッテンフェルト・シンシナティ日本支社
Pipe extrusion molding line from extruder to cutter. バッテンフェルト・シンシナティ日本支社
4 Slurry filling molding line 南陽
5 High-tensile material coil processing sheet rail forming line 英田エンジニアリング

Molding Lineの製品一覧

1～15 件を表示／全 17 件

表示件数

Slurry filling molding line

The filling is done to align the liquid level without being affected by the variation in the bottle's content volume.

■Features of the Device - All processes that affect product quality can be selected and input through the touch panel, and conditions can be saved and retrieved. - The filling mechanism uses a servo motor, allowing for pressurized filling (back) and quantitative filling (front) with a single pump. - The pressing mechanism also uses a servo motor, performing high-speed positioning control of the vacuum pad up to a certain point, then switching to torque control for pressing. - For preliminary pressing of front-filled products, a special vacuum pad is used, allowing for molding without contaminating the intermediate plate. (Patent pending) - The safety-enhanced explosion-proof specification increases the internal pressure within the control panel to prevent the entry of flammable gases. It monitors air pressure and will cut off the power supply if the air pressure drops.

企業：南陽
価格：Other

Powder Molding Machine
Filling and bottling machines

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Pallet molding line (extruder, injection molding machine, molding machine, welding machine)

A recycling system for regenerating composite waste plastics into high-quality molded products. *Molded products: pallets, sheets, etc.

■Features ≪Easy and High Quality≫ ◎ A semi-automatic line that achieves labor savings through a line configuration of melting, injection, molding (mold exchange cart), and welding. ◎ High-quality molding achieved through excellent kneading and vacuum degassing, with the possibility of composite molding with various fillers, glass fibers, and wood powder. ◎ The adoption of an inclined leveling press system enables low-pressure injection and low-pressure molding, resulting in less warping and bending during molding. ≪Compatible with Various Raw Materials≫ ◎ Molding of difficult-to-process waste plastics such as low fluidity, impurity-containing, and composite waste plastics is possible. ◎ Sorted and cleaned container packaging plastics (general waste) can also be processed. ≪Reliable System≫ ◎ The melting machine can accommodate multiple manufacturers. ◎ Molds can be selected from reliable domestic or overseas options with assured support. ◎ As a hydraulic press manufacturer with a proven track record in designing and manufacturing recycling plants for local governments, we ensure high quality. *For more details, please download the PDF or feel free to contact us.

企業：山本鉄工所
価格：Other

Other processing machines
Crusher
Other Auto Parts

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Fully automate extrusion molding! Fully automatic extrusion molding line.

Of course, the extruder, molds, water tanks, retrieval, and cutting are all automated! Just select the recipe, and leave the rest to the machine.

We would like to introduce the fully automatic mold and downstream molding equipment for irregular profile extrusion lines manufactured by our group company, Exelliq. Inside the mold, the resin filling conditions at each part of the profile are adjusted, and the resin shortage and accurate shape molding are automatically controlled. It accurately molds the specified shape while minimizing excess material. This improves weight tolerance, contributes to lightweight profiles, reduces material usage, and ultimately lowers costs. 【Features】 ■ Automatically measures the shape after mold forming ■ Maintains stable profile dimensions ■ Stabilizes variations in material properties for each lot ■ Capable of reading, saving, and registering recipes (parameters) ■ Prevents resin clogging between the mold and downstream equipment *For more details, please download the PDF or feel free to contact us.

企業：バッテンフェルト・シンシナティ日本支社
価格：Other

Other processing machines

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Tube and pipe forming line

General industrial, medical, precision tubes, etc.! We accommodate a wide variety of product applications.

IKG Corporation's "Tube and Pipe Forming Line" accommodates a wide variety of products for general industrial pipes and tubes, medical tubes, precision tubes, and more. We offer a range of molds and sizing formers for both single-layer and multi-layer tubes and pipes. From material supply devices to extruders, molds, vacuum tanks, pullers, and winders, we provide a complete line. 【Features】 ■ Accommodates a wide variety of products for general industrial pipes and tubes, medical tubes, precision tubes, etc. ■ Molds for single-layer and multi-layer tubes and pipes, as well as sizing formers, are also available. *For more details, please refer to the PDF materials or feel free to contact us.

企業：アイ・ケー・ジー
価格：Other

Other processing machines

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

High-tensile material coil processing sheet rail forming line

High-tensile materials are shaped with a dimensional accuracy of ±0.2mm! A high-value-added molding line that produces 30 pieces per minute.

If you need the production of molding machines using roll forming processing, please leave it to us. Our AP-60DB cassette-type PP RST molding line accurately processes holes in coils of high-tensile material (100kg/mm²) for automotive seat rails and molds them using a 30-stage BURS-type molding machine. Simultaneously with double-cutting, we create five round holes and perform straightening on both end faces, producing at a speed of 30 pieces per minute, including deburring (on both end faces) in the final online process, making it a high-value-added molding line. We create approximately 60 holes in a seat rail cross-section of about 350mm in length, molding hard high-tensile material with a dimensional accuracy of ±0.2mm. 【Features】 ■ Hole pitch accuracy is also strict at ±0.2mm and ±0.3mm ■ Since internal stress is released during cutting, causing deformation, a hydraulic correction device is added at the cutting machine section ■ In the final process, the product's end faces are pressed against a cylindrical wire brush for deburring ■ The seat rail product is deburred cleanly on both end faces while changing its posture, ensuring it is safe to touch by hand *For more details, please refer to the PDF materials or feel free to contact us.

企業：英田エンジニアリング
価格：Other

Plastic processing machines (cutting and rolling)

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Corner pillar molding line for residential bus units.

The accumulation device can be automatically accumulated by a robot on a dedicated pallet without human intervention! An automatic supply stock device for the pallets is also fully equipped.

If you need the production of molding machines using roll forming processing, please leave it to us. With the technology and experience we have cultivated over many years, we will design a dedicated machine tailored to your requirements. Our AP-40D cassette-type running pre-notch molding line produces corner posts and other components for residential bath units (5 types). In the pre-processing section (running pre-notch section), hole drilling and notching are performed before molding, and the roll exchange of the molding machine is done through a cassette exchange method. With the automatic cassette changer, a set of cassettes for one product cross-section can be exchanged simultaneously, allowing for quick and unmanned changeovers. 【Features】 - The accumulation device can automatically accumulate on a dedicated pallet using a robot. - An automatic supply stock device for pallets is also fully equipped. - Production is possible for lengths from L: 400mm to L: 2200mm. - Accumulation can be automatically done for lengths from L: 1400mm to L: 2200mm. *For more details, please refer to the PDF document or feel free to contact us.

企業：英田エンジニアリング
価格：Other

Plastic processing machines (cutting and rolling)

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Steel formwork molding line for concrete foundation construction.

The line width can be produced from 200mm to 1200mm, and the length L can range from 150mm to 2250mm!

This is an introduction to a production line for steel formwork used in concrete foundation work. In the pre-processing section (pre-notch section), drilling, notching, marking, and shearing are performed, and the forming machine is an outboard expansion type that can quickly adjust the width of the roll stand according to the width of the product. This line can produce widths from 200mm to 1200mm and lengths from L: 150mm to L: 2250mm. To prevent misalignment of the cut plates, the forming machine clamps the cut plates at the entrance and engages them with the roll. *For more details, please refer to the PDF materials or feel free to contact us.*

企業：英田エンジニアリング
価格：Other

Plastic processing machines (cutting and rolling)

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Extrusion Molding Line Product Catalog

From hardness to higher levels! We propose an extension of the service line for the extrusion molding line.

This catalog summarizes the products of the "Extrusion Molding Line" handled by Tokyo Hard Facing. It features various products, including the highly wear-resistant and corrosion-resistant screw parts "Screw Elements and Kneading Disks for Twin-Screw Extruders," as well as "Barrels for Extruders" and "Screws and Cylinders for Single-Screw Extruders." Please feel free to download and take a look. 【Featured Products】 ■ Screw Elements and Kneading Disks for Twin-Screw Extruders ■ Barrels for Extruders ■ Screws and Cylinders for Single-Screw Extruders ■ Wear- and Corrosion-Resistant Air Transport Clad Pipes ■ Titanium Carbide Lining Dies *For more details, please refer to the PDF document or feel free to contact us.

企業：東京ハードフェイシング
価格：Other

Extrusion Machine

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Hollow profile PC manufacturing extrusion line

Hollow profile PC

- Constant technological innovation and development of new products - Patented calibration system equipped with air cushions and floating plates - UV cut system technology - Energy-saving equipment - Various new shapes of profiles: roof panels, wall panels, clip profiles, cogging profiles, corrugated hollow profiles, and "wing" panels 【Main Features of the Line】 Materials: PC, UV/PC, PMMA, ABS Thickness range: from 4mm (lightweight) to 60mm, with thicker profiles available for special applications upon request. Product shape: 2 to 13 walls, or more Effective width: 600 to 2400mm, or more Output capacity: up to 900kg/h Configuration: single-layer, double-layer, triple-layer, or more

企業：エム・テクノロジーズ
価格：Other

Blow Molding Machine

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

From extruder to stacker! T-die PVC sheet extrusion line.

All equipment from the extruder to the loader is manufactured in-house! A sheet line that can also be fully automated.

We would like to introduce the "PVC Sheet Complete System" that we handle. To ensure a successful production process, it is essential to control the melting temperature within a limited operating range. Foam extrusion requires a material formulation and mold design that are more closely integrated than any other PVC process to achieve optimal performance. 【Advantages】 ■ Density and weight reduction of up to 67% ■ Co-extrusion: Skin layer with high weather resistance ■ The key to successful production is consistency *For more details, please refer to the PDF document or feel free to contact us. *We also have planetary machines available for calendar use.

企業：バッテンフェルト・シンシナティ日本支社
価格：Other

Extrusion Machine

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Pipe extrusion molding line from extruder to cutter.

Lineup of PVC pipe 2-strand lines, cutting machines for 2.5m lines, and more!

Our company supplies a complete set of extruders and production lines as a global company in the field of PVC and non-PVC pipes (mainly PE and PP, as well as ABS, PC, PA, etc.). Examples of pipe applications include hot water and potable water pipes, agricultural and irrigation pipes, and telecom and IT pipes. Please feel free to contact us when you need our services. 【Product Lineup (Excerpt)】 ■ Component assembly: 2.5m helix PO pipe head ■ High-speed 4-layer co-extrusion line equipped with a high-speed dimension change system (FDC) ■ solEX NG with a new processing unit for high output and energy efficiency ■ spider1200 pipe head for a maximum diameter of 1,200mm ■ 4-strand pipe head and calibration for maximum 63mm PVC pipes *For more details, please refer to the PDF document or feel free to contact us.

企業：バッテンフェルト・シンシナティ日本支社
価格：Other

Extrusion Machine

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Automotive wire line

Production speed is MAX. 1200m/min! An automatic wire line for automobiles equipped with a tension stand.

The product is an automotive wire line that uses aluminum as the conductor. The automatic bundling device features our own compact bundling head and includes a tension stand to maintain consistent tension during bundling. Additionally, to accommodate both thick and thin products, the supply stand is available in two types: dual hood type and pay-off type, and there are dedicated extruders for each type. 【Features】 ■ Applicable conductor diameter: 0.75sq to 12sq ■ Production speed: MAX. 1200m/min ■ Aluminum used as the conductor ■ Tension stand included ■ Dedicated extruder provided *For more details, please refer to the external link page or feel free to contact us.

企業：三葉製作所
価格：Other

Extrusion Machine

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Abnormal formation line

From material drying, mixing, and supply equipment to extruders, molds, water tanks, take-off machines, and cutting machines, we provide everything in a line!

We would like to introduce our "Dysplastic Forming Line." It is used for automotive parts, construction materials, home appliance parts, industrial parts, and more. In addition to a suitable screw design tailored to resin materials, we propose an appropriate line configuration that matches the molding conditions, including sizing tanks, take-off machines, and cutting machines. 【Features】 ■ Applications include automotive parts, construction materials, home appliance parts, industrial parts, etc. ■ Suitable screw design tailored to resin materials ■ Proposal of an appropriate line configuration that matches molding conditions, including sizing tanks, take-off machines, and cutting machines *For more details, please refer to the PDF document or feel free to contact us.

企業：アイ・ケー・ジー
価格：Other

Other processing machines

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Spring Roll Filling and Forming Line 'HTS-55'

Capable of producing 3,300 pieces per hour! A fully automated spring roll forming machine that automates everything from filling to wrapping.

The "HTS-55" is a fully automated spring roll forming machine that completely automates the process of filling thin wrappers with a specified amount of filling (meat, vegetables, etc.) and wrapping them. It consists of a section for making the thin wrappers and a section for filling and rolling them. Paste-like raw materials (such as flour and eggs) are fed into a hopper, and while taking the thin wrappers that are baked in strips to a specified length, a specified amount of filling is filled and wrapped. The rolled products are lined up on a conveyor for transport. If connected to a tray packing machine, automatic tray packing is possible. 【Features】 ■ Fully automated filling and wrapping of specified amounts of filling ■ Automatic tray packing is also possible by connecting to a tray packing machine *For more details, please refer to the catalog or feel free to contact us.

企業：大英技研
価格：Other

Other food machinery

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Automotive high-strength steel bumper forming line

Roll exchange is done using a cassette exchange method! The product cutting is performed using a double cut method, resulting in a clean cut surface with minimal deformation.

If you need the production of molding machines using roll forming processing, please leave it to us. With the technology and achievements we have cultivated over many years, we will design dedicated machines tailored to your needs. Our AP-75D cassette-type pre-notch H bumper molding line produces high-tensile steel bumpers for automobiles, combining high quality and versatility. In the pre-treatment section (pre-notch section), hole processing is performed before molding, and the roll exchange of the molding machine is completed in a short time using a cassette exchange method. The installation of an auto cassette changer further improves the efficiency of the changeover. 【Features】 ■ After molding to the specified product cross-sectional shape, rotary spot welding is performed. ■ Following that, R bending is done, and cutting is carried out along the R. ■ The product cutting uses a double cut method, resulting in a clean cut with minimal deformation. *For more details, please refer to the PDF materials or feel free to contact us.

企業：英田エンジニアリング
価格：Other

Plastic processing machines (cutting and rolling)

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

前へ 1 2 次へ