Last Updated： Aggregation Period:Apr 01, 2026～Apr 28, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Apr 01, 2026～Apr 28, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Apr 01, 2026～Apr 28, 2026
This ranking is based on the number of page views on our site.
1351～1380 item / All 2077 items
Nextech 21.5-inch Industrial Resistive Touch Monitor (with Panel Mount Bracket)
Features: ● 21.5-inch 1920x1080 (FHD) industrial touch panel monitor ● Wide viewing angle (up/down/left/right): 178°/178° ● Wide temperature range support from 0°C to 50°C ● Resistive touch panel with hardness of 3H
Nextech 17-inch Industrial Capacitive Touch Monitor (with Panel Mount Bracket)
Features: ● 17-inch industrial touch panel monitor with a resolution of 1280x1024 ● Wide viewing angle (up/down/left/right): 178°/178° ● Capacitive touch panel with 7H hardness tempered glass surface ● Supports 10-point simultaneous touch with fingers or stylus pen
Nextech 19-inch Industrial Capacitive Touch Monitor (with Panel Mount Bracket)
Features: ● 19-inch industrial touch panel monitor with a resolution of 1280x1024 ● Wide viewing angle (up/down/left/right): 170°/160° ● Wide temperature range supporting 0℃ to 50℃ ● Capacitive touch panel with surface hardened glass of 7H hardness ● Supports 10-point simultaneous touch with fingers or stylus pen
Nextech 15.6-inch Industrial Capacitive Touch Monitor (with Panel Mount Bracket)
Features: ● 15.6-inch 1920x1080 (FHD) resolution industrial touch panel monitor ● Wide viewing angle (up/down/left/right): 178°/178° ● Wide temperature range -20℃ to 70℃ support ● Capacitive touch panel with 7H hardness tempered glass surface ● Supports 10-point simultaneous touch with finger or stylus pen
Nextech 17-inch Industrial Resistive Touch Monitor (with Panel Mount Bracket)
Features: ● 17-inch industrial touch panel monitor with a resolution of 1280x1024 ● Wide viewing angle (up/down/left/right): 178°/178° ● Resistive touch panel with a hardness of 3H
Perfect for replacing a 9-inch CRT monitor! 8-inch size analog monitor.
The "Analog Monitor (8-inch Standard)" is an 8-inch LCD monitor that can be directly connected to analog surveillance cameras. It is an ideal model for replacing 9-inch CRT monitors and has obtained various safety standards (UL, CE, CCC). 【Features】 ■ Panel Size: 1 size (8 inches) ■ Analog Input: Can be connected to analog surveillance cameras using only BNC cables Equipped with 2 channels for both input and output for analog BNC ■ VGA Input: Equipped with a VGA (mini D-sub 15-pin) connector Ideal for replacing CRT monitors (9 inches) ■ Burn-in Prevention Function: After a certain period, a line moves from the top to the bottom of the screen, replacing the display to prevent burn-in. *For more details, please refer to the PDF document or feel free to contact us.
We accommodate your needs with monochrome and color CRTs!
We offer the "LCD Monitor Unit," which enables the replacement of industrial equipment monitors and solves your concerns. By supporting a wide variety of video signals and special resolutions (low resolutions), we make replacement possible. Our dedicated LSI, designed for special applications (such as unique resolutions), achieves smooth resolution conversion. We accept orders starting from one unit and can customize according to your needs, so please feel free to contact us. 【Features】 ■ Function design to accommodate a wide range of products ■ Customization available ■ Small quantity and long-term supply possible *For more details, please download the PDF or feel free to contact us.
We tailor the features to meet your needs, achieving overwhelming cost performance!
The "Kinrinkun 2" is a noise and vibration monitor equipped with a one-axis vibration level measurement. Installation is extremely simple. Just plug the power plug into the outlet and start measuring immediately. It features a large LED display for easy visibility. Additionally, it offers one month of automatic measurement, continuously collecting data. It records noise and vibration data every 10 minutes and displays it easily with a dedicated app. 【Features】 ■ Low-cost model with built-in sound level meter and vibration level meter ■ Sound level meter and vibration level meter come with certification ■ The sound level meter complies with the Measurement Law, JIS C 1509-1:2017 (Class 2), and JIS C 1516:2014 (Class 2) ■ The vibration level meter complies with the Measurement Law, JIS C 1510:1995, and JIS C 1517:2014 *For more details, please download the PDF or feel free to contact us.
Constantly monitor carbon dioxide levels to maintain a comfortable environment!
The CO2 monitor "RI-600" can be used for CO2 measurement based on the Building Management Act and Office Sanitation Standards Regulations, as well as for air management in places where people gather, such as offices, classrooms, and conference rooms. It can also be used as a guideline for ventilation measures to prevent the spread of the novel coronavirus. The detection principle is non-dispersive infrared absorption, with a contact capacity of AC125V・1A or DC30V・1A. Options such as mounting plates and power cables are also available. 【Features】 ■ Non-dispersive infrared absorption type ■ Compact and lightweight ■ Easy operation ■ Structure: Wall-mounted ■ Accessories ・Two cross-recessed round wood screws for mounting ・Two cross-recessed pan head screws for mounting *For more details, please refer to the PDF document or feel free to contact us.
Equipped with a new type R sensor, it has evolved into a high-performance and highly durable portable gas monitor for single-component and two-component use with long continuous operation time!
The "04 Series" is a portable gas monitor equipped with a new high-performance, high-durability R sensor. Even if it is accidentally dropped during high-altitude work, the risk of malfunction is low, allowing for safe use. Additionally, models like the "OX-04G," "CO-04," and "HS-04" achieve a long continuous usage time of 9000 hours, and we offer a lineup of sensors with some of the longest continuous usage times in the world, including "OX-04" and "CO-04(C-)." 【Features】 ■ Passes 7m drop durability test ■ Equipped with a high-performance, high-durability new R sensor ■ Safe design for use anywhere ■ Power supply options available with rechargeable batteries or dry batteries *For more details, please refer to the PDF document or feel free to contact us.
Compact and lightweight design of only 45g! With intrinsic safety explosion-proof structure, it can be used in hazardous locations.
The "GW-3" is a portable gas monitor designed to be worn directly, featuring a compact and lightweight design. It has an intrinsically safe explosion-proof structure (domestic explosion-proof/ATEX/IECEx), making it suitable for use in hazardous locations. The protection rating is equivalent to IP66/68 (2m, 1h), providing a dustproof and waterproof structure that is safe for outdoor work. Additionally, the gases that can be detected include oxygen (using a potentiostatic electrochemical method) with the "GW-3(OX)", as well as a rich lineup including "GW-3(O2)" and "GW-3(HS)". 【Features】 ■ Compact and lightweight design at just 45g ■ Alerts for gas detection through a buzzer, lamp, and vibration ■ Equipped with a new high-functionality and high-durability R sensor ■ Safe design for use anywhere *For more details, please refer to the PDF document or feel free to contact us.
Weighing only about 100g! A portable gas monitor that performs well in various environments.
The "GX-3R" is a portable gas monitor with a compact design that does not interfere with work. It features a robust design that can withstand a 7-meter drop test, ensuring safety during high-altitude work. The newly developed CO sensor reduces the interference effects of hydrogen. Equipped with various functions for safety, it is effective in various settings, including construction sites, gas plants, and steelworks. 【Features】 ■ Compact design that does not interfere with work ■ Equipped with a high-performance new R sensor ■ Robust design that can withstand a 7-meter drop test ■ Safety checks before entering pits are possible using a suction unit ■ Newly developed CO sensor reduces the interference effects of hydrogen *For more details, please refer to the PDF materials or feel free to contact us.
The protection level is equivalent to IP67, ensuring safety for outdoor work! It can be used for preventing explosions in work environments, among other applications.
The "GX-2012" is a portable multi-gas monitor that corresponds to a hydrogen sulfide (H2S) alarm setting management concentration of 1 ppm. It has a protection rating equivalent to IP67, ensuring safety for outdoor work. With its intrinsically safe explosion-proof structure, it can be used as explosion-proof equipment even in hydrogen and acetylene atmospheres. Additionally, we offer the "GX-2012GT," which features a leak check function for detecting leaks of flammable gases (ppm measurement). 【Features】 ■ Corresponds to a hydrogen sulfide (H2S) alarm setting management concentration of 1 ppm ■ Intrinsically safe explosion-proof structure ■ Usable as explosion-proof equipment even in hydrogen and acetylene atmospheres ■ Compatible with both dry battery units and lithium-ion battery units ■ Protection rating: IP67, ensuring safety for outdoor work *For more details, please refer to the PDF document or feel free to contact us.
Rich gas lineup! Equipped with two new features to ensure worker safety.
The "GX-6000" is a portable multi-gas monitor capable of simultaneously detecting up to six types of gases. Equipped with a PID sensor, it can also detect VOCs. It features two new functions for protecting worker safety: a panic alarm and a man-down alarm. With the ability to measure several types of gases with a single device, it is effective in improving work efficiency and is suitable for the safety management of chemical substances that are subject to mandatory risk assessments. 【Features】 ■ Simultaneous detection of up to six types of gases with one device ■ VOC detection possible with PID sensor ■ Self-management of hazardous chemicals ■ Japanese display available ■ Two new functions for protecting worker safety (panic alarm & man-down alarm) *For more details, please refer to the PDF document or feel free to contact us.
Detects all 25 types with one device / Direct concentration reading is possible! The pump booster function supports long-distance suction as well.
The "GP-1000" is a portable combustible gas monitor capable of switching between 25 types of detection gases (with direct concentration reading). It has a protection rating equivalent to IP67, ensuring safety for outdoor work. With an explosion-proof rating of ExiaIICT4, it can measure in hazardous locations classified as Zone 0, where there is always a risk of explosion. Additionally, the standard probe can be equipped with a hydrogen sulfide removal filter and a silicone removal filter, allowing for probe configuration when used in work environments where hydrogen sulfide or silicone, which can damage the sensor, are present. 【Features】 ■ Switchable measurement gas types ■ Pump capacity switching function ■ Intrinsically safe explosion-proof structure ■ Protection rating equivalent to IP67 ■ Standard probe can be fitted with cartridge filters (sold separately) *For more details, please refer to the PDF document or feel free to contact us.
Over 740 types of gas measurements are possible at the ppb level! Suitable for measuring individual exposure concentrations.
The "CUB" is a personal PID monitor equipped with a photoionization detector (PID) suitable for VOC detection. It features the ability to read over 740 types of VOCs and toxic gases. The detection range can accommodate a wide spectrum from 0.001 ppm (1 ppb) to 5,000 ppm. With a battery life of up to 16 hours of continuous use, it can also be managed via dedicated software through a PC connection. 【Features】 ■ Sensor structure with minimal humidity influence and resistance to dirt ■ Simple one-button operation ■ Large display with easy-to-understand digital readout ■ Dust and waterproof structure equivalent to protection rating IP65 ■ Measurement results can be viewed in graph form *For more details, please refer to the PDF document or feel free to contact us.
Detects a total of 25 types, including methane, hydrogen, BTX, and alcohol-based gases, all with one device! Direct concentration reading is possible!
The "NC-1000" is a high-sensitivity combustible gas monitor designed for low concentration measurements, capable of measuring various combustible gases in the ppm range. It can directly read the concentrations of 25 types of combustible gases, and it is possible to measure multiple combustible gases with a single unit. The pump booster function allows for long-distance suction. Additionally, a cartridge filter can be attached to the standard probe, enabling customization of the probe for use in work environments where harmful substances like hydrogen sulfide and silicon may damage the sensor. 【Features】 ■ Capable of measuring various combustible gases in the ppm range ■ Gas type switching function allows detection of 25 types of combustible gases with one unit ■ Long-distance suction supported by the pump booster function ■ Automatic switching between two range displays (Low/High) according to measurement values ■ Cartridge-type filter (sold separately) can be attached to the standard probe *For more details, please refer to the PDF document or feel free to contact us.
Even when away from the display unit, it is possible to identify the detection status! Three types of power supply specifications are available.
The EC-600 is a compact carbon monoxide monitor suitable for preventing carbon monoxide poisoning. It allows remote measurement up to 20 meters with a remote sensor. You can install the sensor in areas where there is a risk of leakage and check the concentration values from a separate safe area. We offer four cable lengths: 3m, 5m, 10m, and 20m. You can choose from three types of power supply specifications: AC power, DC power, and battery-operated. This means you can select the power specification that suits your installation location. In the case of the battery-operated specification, two AA batteries can fit inside the main unit, so no extra space is required. 【Features】 ■ Large and easy-to-read LCD screen that lights up in three colors ■ Remote measurement up to 20m with a remote sensor (sold separately) ■ Cables can be drawn out from all four sides of the main unit ■ Three types of power supply specifications available ■ Continuous operation for about one year with two AA alkaline batteries *For more details, please refer to the PDF document or feel free to contact us.
![[Labor Accident Case] Death due to oxygen deficiency during hatch opening work in the hold.](https://image.mono.ipros.com/public/product/image/c76/2000665324/IPROS17718621456955957125.png?w=280&h=280)
A case of oxygen deficiency occurring during the opening operations of hatches and other areas after the completion of wood fumigation in the ship's hold.
On the day before, gas concentration measurements were conducted in the cargo hold where fumigation had taken place, under the supervision of a quarantine officer. As a result, the effectiveness of the fumigation was confirmed, and the opening work for the hatches of each cargo hold began. Since the victim had not returned, a search was conducted, and it was discovered that there was a hatch on the deck that was left open. Looking down from there, the victim was found lying on their back with a gas mask on. Although gas measurements were taken, oxygen concentration measurements were not conducted, leading to a state of asphyxiation, resulting in death due to oxygen deficiency. [Recommendation] ■ For safety confirmation, it is recommended to use a portable gas monitor capable of detecting multiple gases with one device. *For more details, please refer to the PDF document or feel free to contact us.
Check the ventilation status of spaces where people gather with numerical data! A solution for "visualizing" ventilation conditions.
The "Logtta CO2 Monitor" measures the concentration of carbon dioxide (CO2) using a CO2 sensor, allowing you to check the ventilation status of spaces where people gather in numerical form. The measurement values are transmitted via Bluetooth, so you can view them on your smartphone from a distance. You can view up to four sensors on one screen, and it is also possible to use an optional temperature and humidity sensor. 【Features】 ■ Measures the concentration of carbon dioxide (CO2) with a CO2 sensor ■ Allows you to check the ventilation status of spaces where people gather in numerical form ■ Measurement values are transmitted via Bluetooth ■ Can be viewed on a smartphone from a distance ■ Up to four sensors can be checked on one screen *For more details, please refer to the PDF document or feel free to contact us.
Indoor air monitors widely used in schools, offices, and hospitals.
The MB-350U-C series is an indoor air monitor that can precisely measure carbon dioxide (CO2), carbon monoxide (CO), temperature, and humidity. With warning indicators in three colors and a melody alarm, it enables the creation of a comfortable indoor environment. In particular, the MB-350U-CV series can also measure volatile organic compounds (VOCs). Please feel free to contact us if you have any requests. 【Features】 ■MB-350U-CV (485M) ・CO2, CO, VOCs, temperature and humidity, alarm, RS485-Modbus *For more details, please download the PDF or contact us.
Touch monitor compatible with both Windows and Android operating systems.
Touch monitor compatible with both Windows and Android operating systems. *The firmware needs to be matched before use. *For more details, please refer to the PDF document or feel free to contact us.
Introducing our "C/N Monitor," which eliminates the need for entrusted monitoring by performing C/N value judgment!
This document introduces the "C/N Monitor" that our company handles. In the "Specifications and Features" section, we include details such as [Input Frequency], [Measurement Range, Accuracy], [Control Items], [Measurement Signal Input], [External Dimensions], and [Standard Price]. Additionally, we provide explanations about "This Device and Control Software." We encourage you to read it. 【Contents (Excerpt)】 <Specifications and Features> ■ Input Frequency ■ Measurement Range, Accuracy ■ Input Level ■ Control Items ■ External Dimensions *For more details, please refer to the PDF document or feel free to contact us.
Quantitatively measure signal levels! Display measurement timing.
The "ESD-04 type" is an FID voltage monitor for pulse NMR experimental equipment. It reads the FID signal and measures the voltage at any desired timing, allowing for quantitative measurement of differences due to sample materials. It is easy to operate, simply connecting to the EP-350 and E-35 type pulse NMR experimental equipment, and measurements are updated when a trigger is input (with a built-in hold function). 【Features】 ■ Measurement timing delay time setting: 200μS to 2mS (variable from 2mS to 20mS in increments of 10) ■ Hold function: possible with the hold switch ■ Input pulse monitor: can be monitored with an LED lamp upon input ■ Timing pulse monitor: can be monitored with an LED lamp upon input *For more details, please download the PDF or feel free to contact us.
You can visualize the movement of the larynx during swallowing!
It captures the movements of the throat during swallowing and displays them as waveforms on a tablet. The automatic judgment algorithm allows for the measurement of the number of swallows and the timing of swallowing. Measurement results can be recorded and compared with past records.
Contributing to the improvement of cleaning process efficiency with high-temperature direct measurement, long-term stability performance, and a compact body that meets the demands of advanced processes.
The "CS-600F" is a fiber optic chemical concentration monitor that enables direct and stable measurement of high-temperature chemical solutions (20°C to 80°C). It eliminates the need for cooling the chemical solution on the user side, allowing for stable direct measurement of high-temperature chemicals that tend to fluctuate. This achieves greater efficiency and accuracy in chemical management. 【Features】 ■ Compact design of the main unit allows for flexible layout ■ Significantly reduces the frequency of background correction in inline measurements ■ Capable of measuring up to 6 types of chemicals (chemical solutions or ranges) with a single unit ■ Can output measurement values for up to 6 components (in the case of serial output) *For more details, please download the PDF or contact us.
We contribute to improving yield and optimizing processes through drug solution concentration management.
The "CS-900" is a non-contact liquid concentration monitor that achieves high functionality suitable for on-site needs, such as stable measurement accuracy, a unique piping retention structure that considers operational safety, and a compact design, in order to respond to the stringent liquid concentration management in semiconductor manufacturing processes. Thanks to its unique sensor structure that directly attaches to PFA piping, the contamination risk is reduced to "zero." Additionally, it eliminates the need for piping installation during sensor attachment, thereby reducing the risk of accidents such as liquid leaks. 【Features】 ■ Improved installation layout flexibility due to optical design that does not use optical fibers and miniaturization of the amplifier and sensor ■ Achieves complete non-contact and high stability ■ Enables direct and stable measurement of liquid concentrations (20°C to 80°C) ■ Easy to install and remove *For more details, please download the PDF or contact us.
A manufacturing process that requires continuous pH monitoring without sample contamination!
The "UP-100" is a pH monitor capable of measuring with an extremely small sampling volume of 500μL (one-millionth of a liter) per measurement. It can be utilized in a wide range of processes that require continuous pH monitoring, such as semiconductor cleaning and etching processes, food manufacturing processes, pharmaceutical processes, and bioprocesses. 【Features】 ■ Micro-sampling - 500μL per measurement - Maximum consumption of 30mL per hour ■ Real-time measurement - Shortest measurement interval: 1 minute ■ Significantly reduced maintenance cycle - Maintenance once every six months (depending on usage conditions) - Automatic calibration and automatic KCl replenishment *For more details, please download the PDF or contact us.
可燃性ガス（メタン）、硫化水素、一酸化炭素、酸素の濃度を測定表示し、 警報設定時になればブザーを鳴らして知らせてくれます。
■ 保護等級は、屋外作業に安心のIP67相当 ■ 三方向警報ランプ・二方向ブザーで携帯者と周囲に危険をお知らせ ■ 警報はブザー音量95dB以上で騒々しい場所でも聞き逃しなし ■ 4成分のガス濃度を大型液晶画面で同時表示 ■ 時計表示やデータロガ機能も搭載 ■ 小型・軽量、楽々持ち運び ■ 大流量ポンプによる強力吸引
![Portable combustible gas monitor 'GP-1000' [Rental]](https://image.mono.ipros.com/public/product/image/5c0/2000453951/IPROS82248091771693169031.jpeg?w=280&h=280)
Methane, hydrogen, and also BTX (benzene, toluene, xylene) and alcohols. A single device can detect 25 types of gases and allows for direct reading of concentrations.
■ Switchable measurement gas types. Direct reading of concentrations for 25 types of combustible gases. ■ The pump booster function supports long-distance suction. 0.3L/min ⇒ 0.6L/min. ■ Equivalent to protection grade IP67, ensuring safety for outdoor work.
