We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Monitor.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Monitor×関西オートメイション - List of Manufacturers, Suppliers, Companies and Products

Monitor Product List

1～11 item / All 11 items

Displayed results
Electrodynamic Dust Monitor "VIEW Series"

Electrodynamic Dust Monitor "VIEW Series"

Instantaneous concentration changes won't be missed! Achieving ultra-low concentration measurement, high-speed response, and free maintenance.

The "VIEW Series" is a high-resolution and highly stable dust monitor that is less affected by dust adhesion to the probe compared to conventional triboelectric methods and traditional optical detection methods. Starting with the "VIEW370," which can be used for measuring dust concentration in various processes, the lineup also includes the "VIEW Ex800," which can measure in hazardous areas. Despite having one of the largest functionalities among dust monitors, it achieves high-speed data processing. 【Features】 ■ Almost unaffected by adhesion or dirt on the probe ■ Ultra-high sensitivity of 0.01 to 1000 mg/m3 ■ PTFE and FRP coatings can be manufactured (VIEW370・370PRO) ■ Capable of measuring high-humidity gases with a special air purge (VIEW370・370PRO) ■ Free power supply: AC 90 to 260V *For more details, please refer to the PDF document or feel free to contact us.

  • Other measurement, recording and measuring instruments
  • Other process controls

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Exhaust Gas Heating Type Dust Monitor 'QAL182WS'

Exhaust Gas Heating Type Dust Monitor 'QAL182WS'

Stable detection of particulate matter concentration in exhaust gas below the dew point with water droplets! Introducing a dust monitor with an exhaust gas heating method.

The QAL182WS is a dust monitor that enables the measurement of dust concentration in exhaust gas from wet desulfurization and wet dust collection equipment at "below dew point" levels. Exhaust gas containing water droplets below the dew point is suctioned from the duct due to the eductor effect. By vaporizing the water droplets in a vaporization chamber, the dust concentration is measured in a dry state. Dust measurement is conducted using a forward scattering method with high-resolution laser light. 【Specifications (Measurement Conditions)】 ■ Exhaust Gas Temperature: 80°C (MAX 200°C) ■ Measurement Range: 0 to 100 mg/m³ ■ Detection Resolution: 0.1 mg/m³ ■ Ambient Temperature: -20 to +50°C ■ Exhaust Gas Flow Rate: MAX 30 m/sec *For more details, please refer to the PDF document or feel free to contact us.

  • Other measurement, recording and measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Electrodynamic Dust Monitor "VIEW Series"

Electrodynamic Dust Monitor "VIEW Series"

A high-resolution and highly stable dust monitor that is less susceptible to dust adhesion on the probe.

Starting with the "VIEW370," which can be used for measuring dust concentration in various processes, we also offer the "VIEW Ex800," which can measure in hazardous areas. Despite having one of the most advanced features in dust monitoring, it achieves high-speed data processing. 【Features】 ■ Almost unaffected by adhesion or dirt on the probe ■ Ultra-high sensitivity of 0.01 to 1000 mg/m3 ■ PTFE and FRP coatings can be manufactured (VIEW370・370PRO) ■ Capable of measuring high humidity gases with special air purging (VIEW370・370PRO) ■ Free power supply: AC 90 to 260V ■ Capable of withstanding ultra-high temperatures: MAX 800℃ ■ Supports up to 16-channel sensors (VIEW370PRO) ■ Can be connected to a common bus with other models from our company (VIEW370PRO) *For more details, please refer to the PDF document or feel free to contact us.

  • Other measurement, recording and measuring instruments
  • Other process controls

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Dust Monitor "Leak Alert 73/65-02"

Dust Monitor "Leak Alert 73/65-02"

Achieving outstanding high precision and stability through a unique measurement principle! The standard for dust collector predictive alarms.

The "Leak Alert 73/65-02" is an electrodynamic dust monitor that reliably detects even minor increases in concentration of bag filters and cyclones. In particular, it ensures the detection of slight concentration increases within the normal range for monitoring bag filters. It achieves reduced running costs and guarantees that it will not "leak" at all. The "Leak Alert 73" is an integrated type, while the "Leak Alert 65-02" is a separated type. 【Features】 ■ Exceptional high precision and stability achieved through a unique measurement principle ■ Reliable detection of minor concentration increases in bag filters and cyclones ■ Early detection of filter cloth abnormalities in bag filter exhaust dust concentration measurement ■ Reduced running costs and guaranteed "no leaks" *For more details, please refer to the PDF document or feel free to contact us.

  • Other measurement, recording and measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
No calibration needed! Dynamic opacity method (optical) dust monitor

No calibration needed! Dynamic opacity method (optical) dust monitor

A unique principle dust monitor that calculates the ratio of dust particles, sparkle (amount of change), and light reception to determine dust concentration.

The "Dynamic Opacity Method Dust Monitor" has no moving parts, making it highly reliable and capable of stable measurements over long periods. We offer a lineup that includes the basic model mass concentration meter "STACK602," which can measure exhaust ducts up to 15m, the basic model relative concentration meter "VIEW580," and the light transmission dust monitor "STACK710." Unlike typical light scattering dust monitors, our measurement principle is not affected by lens dirt or optical axis misalignment, simplifying maintenance. 【Features】 ■ Wide range: <10–1000mg/m3 ■ Free power supply: AC90–260V ■ Highest resolution: 0.2mg/m3, maximum response speed: high sensitivity and fast measurement at 2 seconds ■ Unique measurement principle allows for calibration-free operation despite being an optical dust monitor ■ Capable of measuring large ducts of 10m (15m for the STACK602 model) due to the use of high-brightness LEDs *For more details, please refer to the PDF document or feel free to contact us.

  • Other measurement, recording and measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Backscatter type dust monitor "QAL360 series"

Backscatter type dust monitor "QAL360 series"

Please use it for high-precision continuous measurement of exhaust gas concentration and monitoring of bag filter performance! It is suitable for measuring dust concentration in large equipment ranging from 1 to 15 meters.

The "QAL360 Series" is a backscatter dust monitor that achieves easy installation and high maintenance capability by adopting a backscattering method. It includes models such as the "QAL360Std," which can be used as a mass concentration meter, and the "QAL360PRO," which can connect up to 16 sensors. 【Features】 ■ Adoption of the backscatter method enables convenient one-sided installation ■ Suitable for measuring dust concentration in large equipment from 1 to 15 meters ■ Less affected by various conditions, allowing for stable measurements ■ Resolution of 0.01 mg/m3 ■ Equipped with self-diagnosis function *For more details, please refer to the PDF materials or feel free to contact us.

  • Other measurement, recording and measuring instruments
  • Other process controls

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Forward Light Scatter Dust Monitor "QAL181"

Forward Light Scatter Dust Monitor "QAL181"

High cost-performance forward light scattering dust monitor with multi-controller supporting up to 16 channels of multi-sensor!

The QAL181 is a dust monitor that employs a forward light scatter method with high detection efficiency. 【Features】 ■ High-precision and high-resolution measurement using the forward light scatter method ■ High resolution: 0.1 mg/m3; recommended measurement range: 0 to 10/100 mg/m3 ■ Robust probe structure and dust adhesion resistance ■ Less affected by various conditions due to pinpoint measurement ■ Equipped with automatic ZERO and SPAN check mechanism ■ Free power supply: AC 90–260V 50/60Hz 【Standards】 ■ CEN standards: EN-13284-2/EN-14181 (incinerators, power plants, cement kilns) ■ US EPA standards: PM-CEMS (PS-11) *For more details, please refer to the PDF document or feel free to contact us.

  • Other measurement, recording and measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Manga Explanation: Electrodynamic Dust Monitor

Manga Explanation: Electrodynamic Dust Monitor

Stable detection of dust concentration with a unique measurement principle! An explanation of dust monitors in manga format.

This booklet provides an easy-to-understand explanation of the electrodynamic dust monitor through manga. "We had a serious situation in the factory when the filter cloth of the bag filter tore and dust leaked out. Is there any equipment that can monitor dust leakage from the bag filter?" This addresses the real voices from the manufacturing site. Please feel free to download and take a look. [Contents] ■ Electrodynamic Dust Monitor ・ Bag Filter *For more details, please refer to the PDF document or feel free to contact us.

  • Other measurement, recording and measuring instruments
  • Other process controls

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Explanation in Manga: Backscatter Method Dust Monitor

Explanation in Manga: Backscatter Method Dust Monitor

A groundbreaking integrated light emission and reception system using optical methods! An explanation of the main features of the backscatter-type dust monitor.

This booklet provides an easy-to-understand explanation of backscatter dust monitors through manga. "We want to measure dust concentration in a 10m class duct, but isn't it difficult because optical sensors need to be installed facing each other?" This addresses the real voices from manufacturing sites. Please feel free to download and take a look. [Contents] ■ Backscatter Dust Monitor ・ Maintenance *For more details, please refer to the PDF document or feel free to contact us.

  • Other measurement, recording and measuring instruments
  • Other process controls

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Dust Monitor "Leak Alert 73/65-02"

Dust Monitor "Leak Alert 73/65-02"

Dust Monitor Leak Alert 73/65-02, optimal for monitoring bag filter performance and detecting initial defects in dust collectors!

Leak Alert 73 (integrated type) / 65-02 (separated type) is an electrodynamic dust monitor. The electrodynamic type is a high-resolution and high-stability dust monitor (particulate concentration meter) that is less affected by dust adhesion to the probe compared to conventional triboelectric methods or traditional optical detection methods. Generally, during filter cleaning (pulse jet, shaking, backwashing), the exhaust concentration of a typical bag filter temporarily increases. If there is an abnormality in the filter, a rapid concentration increase occurs. By monitoring this rapid concentration increase with a dust monitor (particulate concentration meter), it is possible to detect abnormalities in the filter at an early stage and replace the filter before it completely tears. Additionally, it is possible to identify filters that are experiencing abnormalities from trends, which can help reduce running costs. We can assist with explanations of the dust monitor, selection of sensors suitable for usage conditions, and we also offer test product loans, so please feel free to contact us.

  • Other measurement, recording and measuring instruments
  • Other process controls

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Explosion-proof type dust monitor "Leak Alert 73X/65-02X"

Explosion-proof type dust monitor "Leak Alert 73X/65-02X"

Domestic explosion-proof certification completed! Dust monitor LeakAlert73X and LeakAlert65-02X.

The Electro-Dynamic Dust Monitor LeakAlert73 (integrated type) and LeakAlert65-02 (separated type) have obtained domestic explosion-proof certification, so they can be used in explosion-proof areas. <Integrated Type Explosion-Proof> Model: LeakAlert73X Explosion-Proof Structure: Dust explosion-proof structure "t" by container Applicable Zone: Zone 20 <Separated Type Explosion-Proof> Model: LeakAlert65-02X Explosion-Proof Structure: Dust explosion-proof structure "t" by container Applicable Zone: Zone 22 We can assist with explanations of the dust monitor, selection of sensors suitable for usage conditions, and we also offer the possibility of lending test products, so please feel free to contact us.

  • Other measurement, recording and measuring instruments
  • Other process controls

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Monitor

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.