Last Updated： Aggregation Period:Sep 02, 2026～Sep 29, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 02, 2026～Sep 29, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 02, 2026～Sep 29, 2026
This ranking is based on the number of page views on our site.
61～90 item / All 128 items
32Channel Optically Coupled Digital I/O Board with Built-in-Test
32-Channel Optically Coupled Digital I/O Board with Built-in-Test. This board has 32 optically coupled inputs and 32 optically coupled outputs. Both the outputs and inputs have Built-in-Test capability and provide a sustained 1 kV of system isolation to the VMEbus backplane.
32-bit High-Voltage Digital Input/Output Board
VME-2532A 32-bit High-Voltage Digital Input/Output Board, 32 bits of high-voltage outputs, 8- or 16-bit data transfers, Built-in-Test (off-line and real-time support)with Front panel with fail LED.
TG45AX dedicated LVDS output unit
TG45AX002 is a dedicated LVDS output option for the TG45AX test signal generator. It outputs up to 12-bit LVDS for display panels that are advancing in high resolution and wide color gamut. Depending on the dot clock frequency, it can switch output in single-phase mode (20-135MHz), dual-phase mode (40-270MHz), and quad-phase mode (80-400MHz), and it also allows switching of the grayscale for each RGB channel between 8, 10, and 12 bits (8-bit grayscale for dot clock frequencies above 200MHz). The test signals from the TG45AX itself can output natural image signals, and additionally, it can output in conjunction with variable functions such as adjustable signal levels, frequencies, and phases.
HDMI output unit upgrade for TG35 series
Shibasoku has started accepting paid upgrades for the HDMI output unit TG35AX003 (optional), exclusively for the TG35AX/BX/CX digital test signal generator. TG35AX003 is an output unit compliant with HDMI Version 1.1, and the upgrade will enable the output of two new HDMI output formats (VIC 16: 1920*1080p at 59.94/60Hz, VIC 31: 1920*1080p at 50Hz). The HDMI Tx PHY will be replaced from SiI9190 to SiI9030, and a firmware update compatible with SiI9030 will be performed.
The Zilog Z0853606 has been discontinued due to the cessation of production, and this product has also been discontinued. (2022.10.26)
1. This is a digital input/output board with 32 input points and 32 output points. 2. All inputs and outputs are isolated. 3. The input/output status can be checked in 8-bit units. 4. The 32 input points can be used as interrupt inputs.
This is an I/O board that complies with the EtherCAT slave specification and can connect to the EtherCAT master at 100 Mbps.
● This is a compact general-purpose digital input/output board with isolated input and output, featuring 4 input ports and 4 output ports. ● It connects to adjacent devices using a 100 baseTX CAT-5 cable, and the distance between devices can be extended up to 100m. ● It is capable of multi-point synchronization signal input and output (utilizing EtherCAT's distributed clock). ● We can accommodate inquiries regarding customization of the number of input and output signals and support for various data input/output devices with EtherCAT.
Full hot-swap compatible 6U size Compact PCI board
■Compliant with PCI Local Bus Specification Revision 2.2 ■Compliant with PICMG 2.0 R3.0 CompactPCI Specification ■Compliant with PICMG 2.1 R1.0 CompactPCI Hot Swap Specification ■Number of input channels: 64ch, Number of output channels: 64ch ■Photocoupler isolation ■Operates on a single 5V power supply provided by the CompactPCI slot ■Supports device drivers for Windows NT/2000/XP/Vista ■Supports device drivers for VxWorks (paid option)
Selectable input and output for all 16 bits!
■Digital input/output board with USB interface ■High-speed data transfer is possible just by connecting the cable without removing any covers ■Input and output selection can be made separately for all 16 bits ■High functionality packed into a compact board, achieving low cost for embedded use ■Includes USB cable, connectors, and more
Complete insulation between each bit and the computer! You can safely build a system even when connecting multiple devices with different ground potentials and in very noisy environments.
This is an isolated input/output unit with USB connection. Since each bit is completely isolated from the computer, it allows for the connection of multiple devices with different ground potentials, and it can be used safely to build computer systems even in very noisy environments. Due to its compact and lightweight design, it requires only a small installation area, making it advantageous in terms of space when integrating into various devices. Up to 16 units can be connected for one model. It has become even easier to use when combined with optional input/output adapter boards. 【Features】 - Compact and lightweight, requiring only a small installation area, making it advantageous in terms of space when integrating into various devices. - Up to 16 units can be connected for one model (ID number selection via rear switch). - Further ease of use when combined with optional input/output adapter boards. - Three models available with different input/output specifications: - TUSB-INS8/8Z (8 inputs/8 outputs) - TUSB-INS16IZ (16 inputs) - TUSB-INS16OZ (16 outputs) *For more details, please request documentation or view the PDF data available for download.
Easily connect to the installed LAN and output two sets of voltage-free contacts (ON/OFF)!
It features high voltage resistance for safety, is PoE compatible so no power supply is needed, does not require tools such as drivers for wiring connections, and complies with RoHS directives. It can be mounted on a DIN rail and is suitable for factory production equipment, power facilities, and large buildings.
8ch Relay Output Module ND-6063
ADLINK's NuDAM data acquisition module constitutes a comprehensive acquisition network and control system. Up to 256 NuDAM modules can communicate over a single serial RS-232 connection to an RS-485 network from a host computer, enabling communication over distances of up to 4000 feet. Based on an RS-485 multi-drop network system, each module has a unique address ID that allows control of all NuDAM modules within the RS-485 network through a simple ASCII command and response protocol via a standard RS-485 interface. The NuDAM modules provide direct communication with various sensors that perform all signal conditioning, scaling, linearization, and conversion, allowing for the acquisition of measurements for temperature, pressure, flow, voltage, current, and multiple types of digital signals.
A bridge between industrial control devices and PCs.
This is hardware that serves as a bridge between various sensors, switches, encoders, PLCs, and various PC platforms.
● High-speed sampling (Analog input 180 KSPS) (Analog output 150 KSPS) ● 6-channel simultaneous sampling ● Built-in bus isolation circuit
Compatible with Windows 11 / 10 Supports USB 2.0 (480Mbps / 12Mbps) High resolution (16-bit) Wide range (-10V to +10V) input/output High-speed sampling (analog input 180KSPS) (analog output 150KSPS) 6-channel simultaneous sampling → Sampling at the highest speed is possible even when using all channels. Equipped with a large data buffer (1M data per channel) → Significantly reduces the load on the computer side. Features external clock, external trigger, and analog trigger functions Built-in bus isolation circuit → High noise resistance. → Protects the computer from abnormalities in external circuits. Software is also provided, allowing operation without programming. [Example of software] ・Continuous analog input with waveform displayed in graph form ・Continuous analog input with file saving (data logger) ・Reads waveform data from CSV files and outputs analog signals (arbitrary waveform / function generator)
Bus-powered high-reliability insulated input/output board with detachable screwless terminal block type.
Compatible with Windows 11 / 10 / Linux Supports USB2.0 (480Mbps / 12Mbps) It operates on bus power, so no external power supply is needed. (However, a power supply is required to operate the isolation circuit and load.) Opto-isolated digital input/output → High noise resistance. → Protects the computer from abnormalities in external circuits. The input voltage for digital input supports DC12V and DC24V. Digital output is a high-current open collector output → Capable of directly driving relays, LEDs, etc. The connection method for input/output uses a detachable screwless terminal block type, making wiring easy and detachable. Mounting methods can be selected between DIN rail and spacers.
Communication response with the host is swift! Usable on Windows and Linux with a USB port.
The "USB-PC104 series" is an isolated analog input/output unit (A/D, D/A) with USB connection type. It allows voltage measurement and output using the USB port of a computer. The USB supports High-speed mode (480Mbps). Depending on customer needs, a wide variety of models are available to choose from regarding the number of analog input/output channels and digital input/output points. 【Features】 ■ Usable with computers that do not have PCI slots ■ USB supports High-speed mode (480Mbps) ■ High resolution (16-bit) and wide range (-10V to +10V) input/output ■ Built-in bus isolation circuit ■ Up to 16 units can be connected to a single PC (USB hub can be used) * For more details, please refer to the related links or feel free to contact us.
Bus-powered, high-reliability insulated input/output, screwless terminal block type.
USB2.0 compatible bus-powered high-reliability isolated input/output board 'DIO-8/8B-UBT' Compatible with Windows 11 / 10 / Linux Supports USB2.0 (480Mbps / 12Mbps) It operates on bus power, so no external power supply is needed. (However, a power supply is required to operate the isolation circuit and load) Photocoupler isolated digital input/output → High noise resistance. → Protects the computer from external circuit abnormalities. Digital input voltage supports DC12V and DC24V Digital output is a high-current open collector output → Can directly drive relays, LEDs, etc. The connection method for input/output is a screwless terminal block, making wiring easy.
Bus-powered high-reliability insulated input/output board, MIL connector type.
Compatible with Windows 11 / 10 / Linux Supports USB2.0 (480Mbps / 12Mbps) It operates on bus power, so no external power supply is needed. (However, a power supply is required to operate the isolation circuit and load.) Photocoupler isolated digital input/output → High noise resistance. → Protects the computer from external circuit anomalies. The input voltage for digital input supports DC12V and DC24V. Digital output is a high-current open collector output → Capable of directly driving relays, LEDs, etc. The connection method for input/output uses MIL connectors with locking levers, making it easy to plug and unplug.
16-bit input + 16-bit output expansion I/O board 'MPC-RAS32IO-V2' developed for Raspberry Pi.
The output signal and input signal are isolated by a phot coupler, and the withstand voltage of the external power supply for output is a maximum of 36V. The communication protocol can be selected between I2C or SPI. The input signal is turned on/off by the current flowing through the phot coupler. ◆ Features Input Section ◎ Wide Input Voltage Range The voltage of the input signal can be specified as 5V, 12V, 24V, or 36V, which will be set at the time of shipment. Output Section ◎ High Voltage and High Output Current The output section covers a wide range of voltages from 5V to 36V using FETs. The power supply is provided externally. Common Section ◎ Isolation from External Sources The internal circuit is electrically isolated from the external circuit by the phot coupler, preventing malfunctions or electrical damage caused by abnormal voltages, noise, or ground level fluctuations from outside. ◎ Board Size Same size as Raspberry Pi 3 MODEL-B and Raspberry Pi 2 MODEL-B. ◎ Connection with Raspberry Pi Connect to the 40-pin (GPIO) of the Raspberry Pi and communicate via I2C or SPI. ◎ When connecting to the 40-pin connector of the Raspberry Pi, an MPC-RASST may be required as an intermediary board.
Customization of output voltage is possible according to the target!
The "PA Series" is a high-voltage pulse output unit that integrates a DC power supply, amplifier, and high-voltage transformer. It allows for customization of the output voltage to suit the application, making it effective for generating plasma and ions. If you have any specific requests regarding custom outputs, please feel free to contact us. 【Features】 ■ Ideal for plasma and ion generation ■ Integration of DC power supply, amplifier, and high-voltage transformer ■ Low cost *For more details, please download the PDF or feel free to contact us.
This is a lineup of compact input/output units equipped with TS over IP/ASI input and output functions.
The "DBS7700/7800" is a compact unit that enhances the convenience of TS over IP transmission. It features TS over IP/ASI output capabilities in a compact chassis measuring 130(W) × 38(H) × 210(D) mm. It converts the received TS to TS/IP in real-time and transmits it via unicast or multicast RTP. 【DBS7800】... ASI input IP transmission unit 【DBS7700】... IP input ASI transmission unit They are essentially configured as a pair. 【Features】 ■ Compact chassis measuring 130(W) × 38(H) × 210(D) mm ■ Real-time TS/IP conversion of received TS ■ Unicast or multicast RTP transmission ■ Support for PRO-MPEG CoP3, FEC addition, and CBR transmission ■ The DBS7800 allows for unicast transmission settings for 5 or 10 locations as a paid option *For more details, please refer to the PDF materials or feel free to contact us through our website.
We provide user-friendly products and will respond flexibly to our customers' requests.
Our company started with the design and development of semiconductor IP products and has continued to focus on in-house product development since its establishment. The primary goal of our product development is short-term development. To achieve this, we have adopted an "architecture" that combines dedicated boards accumulated on a platform called a motherboard, which has enabled us to reduce development costs and achieve a variety of short-term developments. We will introduce innovative products based on patented technology and respond flexibly to our customers' requests. 【Business Activities】 ■ Design and sales of digital broadcasting-related equipment ■ Sales of MULTI2/IP products *For more details, please refer to the PDF materials or feel free to contact us.
IoT unit capable of remote monitoring
The CD-S-IOT is a general-purpose I/O board equipped with analog inputs, I/O ports, Wi-Fi, RTC, and flash memory. By combining it with our CD-S board, it can be utilized as an IoT unit capable of AD sampling, numerical and graphical display, data logging, alarm output, and remote monitoring via Wi-Fi.
An addon module with 16 digital inputs and 16 digital outputs!
The "Kvaser DIN Rail S010-X10 Digital add-on" is an add-on module available as an option for the Kvaser DIN Rail SE400S-X10 base module. This module, with an IP20 protection rating, includes a thermal protector, reverse polarity protection, and surge power protection. The status of the module is indicated by a power LED, and there are also LEDs for both input and output. To operate the add-on module, the Kvaser DIN Rail SE400S-X10 is required. Please feel free to contact us if you need assistance. 【Features】 ■ Supports 16 digital inputs and 16 digital outputs, controllable via the base module ■ Class 2 rated input voltage of 24VDC (-15%/+20%) ■ IP20 protection rating, with thermal protector, reverse polarity protection, and surge protection ■ Easy installation on DIN rail with a plastic modular housing that requires no tools *For more details, please download the PDF or feel free to contact us.
Dedicated individual output unit for communication-linked multi-channel controller.
■Features The individual output unit can be configured for individual alarm output, individual set output, individual loop output, etc. *Up to 3 units (3 systems) can be embedded for every 10 channels.
Compatible with various small temperature and humidity sensor cables! Suitable for temperature and humidity management in air conditioning systems.
We would like to introduce a series of temperature and humidity analog output modules that can easily convert the digital signals from high-precision capacitive temperature and humidity sensors into analog outputs. The temperature and humidity analog output module "SHTDA-2" allows for easy analog conversion of high-precision capacitive digital temperature and humidity sensors. The temperature and humidity analog output unit "SHTDA-W" features a microUSB input and an easily detachable BNC cable output. Please select the sensor according to your measurement environment. 【Features】 ■SHTDA-2 - Ultra-compact size of 27×14×9mm - Easy connection for immediate output start ■SHTDA-W - Compact analog output unit capable of simultaneous 4-channel output - Digital display via LCD monitor *For more details, please download the PDF or feel free to contact us.
Compact and easy to handle, with the possibility of embedding. Output of 0 to 3.0V, compatible with power supply of 5 to 24V.
The temperature and humidity analog conversion output module 'SCM-DA2' is a product that reduces the burden of temperature and humidity measurement. Simply turning on the power automatically recognizes the sensor and converts the digital data from the temperature and humidity sensor into an analog output. The output is clear at 0 to 3.0V, and it can be powered with 5 to 24V. It can be connected and utilized with PLCs, voltage data loggers, panel meters, and more. *The catalog also includes the accuracy and specifications of the sensors, so please download it for confirmation.
Ultra-compact and easy to embed, streamlining data collection.
In the field of meteorological observation, the accurate collection of temperature and humidity data is essential. Observational data is utilized in various areas, including climate change analysis, extreme weather prediction, and environmental conservation. However, traditional temperature and humidity measurement systems can be cumbersome in terms of installation and data processing. The temperature and humidity analog conversion output module 'SCM-DA2' is a product that can reduce the burden of temperature and humidity measurement. 【Usage Scenarios】 - Outdoor meteorological observation stations - Environmental monitoring in research institutions - Environmental management in agriculture 【Benefits of Implementation】 - Easy data collection and analysis - Simplification of data integration with other measurement items - Compatibility with a variety of sensors
Temperature and humidity measurement solutions that support quality control in food manufacturing.
In the food manufacturing industry, precise management of temperature and humidity in the manufacturing environment is essential to maintain product quality. In particular, changes in temperature and humidity directly affect food spoilage and quality degradation, making proper temperature and humidity management indispensable. Inadequate management can lead to a decline in product quality or waste. The temperature and humidity analog conversion output module 'SCM-DA2' is a product that can reduce the burden of temperature and humidity measurement. [Usage Scenarios] - Food storage rooms - Production lines - Quality control rooms [Benefits of Implementation] - Visualization of temperature and humidity data - Improved efficiency in quality management - Maintenance of product quality
