PIN(fe) - メーカー・企業と製品の一覧

Jumper wire / jumper pin

Used on the circuit board! Terminals/pins that change the flow of current by shorting the electrical circuit with jumper pins.

FineNex manufactures and sells "jumper wires and jumper pins," accommodating production from 10,000 pieces to several hundred million pieces per month. These products are used on circuit boards and change the flow of current by shorting (connecting) electrical circuits with jumper pins. We can accommodate materials such as iron-based (Fe, SUS) and non-ferrous (copper-based, aluminum-based, Au, Ag). 【Features】 ■ Used on circuit boards ■ Changes the flow of current by shorting (connecting) electrical circuits with jumper pins ■ Accommodates production from 10,000 pieces to several hundred million pieces per month *Specifications (wire diameter, length, plating), materials, etc. can be discussed separately. *For more details, please refer to the related links or feel free to contact us.

企業：ファインネクス本社、東京支店、大阪支店、名古屋支店、ベトナム工場、シンガポール営業所
価格：Other

Printed Circuit Board

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Iron split pin

It is used to prevent loosening and falling off of nuts. After tightening the nut onto the bolt, a cotter pin is inserted into the pin hole. It is used in areas where vibration or temperature differences occur. It cannot be reused.

企業：ウィルコ
価格：Other

bolt

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Drift Pin MDP

A lineup of products for various uses! We offer four different sizes.

The "Drift Pin MDP" offers a lineup of products for various applications, including 90mm width materials, 105mm decorative materials, and 120mm decorative materials. There are four sizes available: φ12×85, φ12×95, φ12×103, and φ12×118. The material used is "JIS G 3505 SWRM 8." 【Features】 ■ Material: JIS G 3505 SWRM 8 ■ Surface treatment: JIS H 8610 (electro-galvanized) and JIS H 8625 Ep-Fe/Zn8/CM2 C *For more details, please refer to the PDF document or feel free to contact us.

企業：高尾
価格：Other

others

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Current input terminal multi-pin

Short delivery time, low price! Multi-pin type feedthrough for use in high vacuum and ultra-high vacuum containers.

The "Current Introduction Terminal (Multi-Pin Type)" is a current introduction terminal with multi-type connectors on one side or both sides. The materials for the pins include copper, nickel, aluminum alloy (Almel), molybdenum, and Ni-Fe. We also offer a high-current 40A type as a multi-connector connection type. Multi-pin current introduction terminals such as MIL round type, D-Sub, and C-Sub are also available. If you wish to customize, please contact us. 【Features】 ■ Multi-pin type ■ Supports up to 50 pins ■ Customizable ■ Mounting options include ICF flange, NW flange, welding type, BASEPLATE, etc. * For more details, please refer to the catalog or feel free to contact us.

企業：テクサム
価格：Other

others

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Corner ejector pin

The corner ejector pin is an ejector pin with a tip that has been processed into a corner shape. ERH, ERSF, and ERHT□□ are products made from SKH51 and are mainly small diameter. ERDF is a product made from SKD61 and is mainly large diameter.

企業：CHAMPION CORPORATION
価格：Other

Steel

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Cello endpin "Alfe Endpin Antique"

Exhibits high effectiveness in areas with low amplitude!

We offer the cello endpin "Alfe Endpin Antique," which uses "Alfe" to stop micro-vibrations. All manufacturing processes, including melting, billet production, rolling, drawing, processing, and heat treatment, are carried out by domestic manufacturers. We also have diameters of Φ8 and Φ10 available. Please feel free to contact us if you have any requests. 【Features】 ■ Effective in halls with rich resonance ■ Exhibits high effectiveness in areas with low amplitude *For more details, please download the PDF or contact us.

企業：アルフェコ
価格：Other

alloy

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

[Processed Parts Performance] Hinge Pin

Shortest half-day estimate / Introduction of achievements in lathe-processed parts! From one piece of various types in small quantities! We will provide an estimate for processed parts in the shortest half-day.

Agency Assist has a proven track record in the prototyping and development sectors across various industries. We can handle a wide range of materials, including aluminum, iron, stainless steel, brass, and resin. This time, we would like to introduce our lathe-processed component, the "Hinge Pin." 【Features】 -------------------------------------------------------------- Part Name: Hinge Pin Material: Stainless Steel (SUS303D) Processing Method: Lathe Processing Size: φ12mm × 30mm Surface Treatment: None -------------------------------------------------------------- "Features of Agency Assist" - We provide estimates for processed parts within half a day at the shortest. - We accommodate everything from single-item processing to small lots of various types. - We handle everything from surface treatment to hardening, polishing, and precision inspection. From metals to resins, trust us with your cutting processing needs for prototyping and development parts. ☆ Please feel free to contact us for a preliminary estimate! ☆

Processing Contract

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

[Processed Parts Results] Press-fit Pins

Shortest half-day estimate / Introduction of achievements in lathe-processed parts! From one piece of various types and small quantities! We will provide an estimate for processed parts in as little as half a day.

Agency Assist has a proven track record in processing for prototype and development fields across various industries. We can handle a wide range of materials, including aluminum, iron, stainless steel, brass, and resin. This time, we would like to introduce our lathe-processed component, the "Press Fit Pin." 【Features】 -------------------------------------------------------------- Component Name: Press Fit Pin Material: Stainless Steel (SUS303D) Processing Method: Lathe Processing Size: φ16mm × 23.5mm Surface Treatment: None -------------------------------------------------------------- "Features of Agency Assist" - We provide estimates for processed parts within half a day at the shortest. - We accommodate everything from single-item processing to small lots of various types. - We handle everything from surface treatment to hardening, polishing, and precision inspection. From metals to resins, leave your cutting processing for prototype and development parts to us. ☆ Please feel free to contact us for a preliminary estimate! ☆

Processing Contract

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

[Processed Parts Results] Pin

Shortest half-day estimate / Introduction of achievements in lathe-processed parts! From one piece of various types and small quantities! We will provide an estimate for processed parts in as little as half a day.

Agency Assist has a proven track record in processing for prototype and development fields across various industries. We can handle a wide range of materials, including aluminum, iron, stainless steel, brass, and resin. This time, we would like to introduce our lathe-processed part "Pin φ16." 【Features】 -------------------------------------------------------------- Part Name: Pin Material: Stainless Steel (SUS303) Processing Method: Lathe Processing Size: φ15mm × 36.4mm Surface Treatment: None -------------------------------------------------------------- "Features of Agency Assist" - We provide estimates for processed parts in as little as half a day. - We accommodate everything from single-item processing to small lots of various types. - We handle everything from surface treatment to hardening, polishing, and precision inspection. We can handle everything from metals to resins! Trust us with your cutting processing for prototype and development parts. ☆ Please feel free to contact us for a preliminary estimate! ☆

Other machine elements

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

[Processed Parts Results] Pin

Shortest half-day estimate / Introduction of lathe-processed parts! From one piece of various types and small quantities! We will provide an estimate for processed parts in as little as half a day.

Agency Assist has a track record in processing for prototype and development fields across various industries. We can handle a wide range of materials, including aluminum, iron, stainless steel, brass, and resin. This time, we would like to introduce our lathe-processed component, the "Pin." 【Features】 -------------------------------------------------------------- Part Name: Pin Material: Aluminum (A5052) Processing Method: Lathe Processing Size: φ16×37 Surface Treatment: White Anodizing -------------------------------------------------------------- "Features of Agency Assist" - We provide estimates for processed parts in as little as half a day. - We accommodate everything from single-item processing to small lots of various types. - We handle everything from surface treatment to hardening, polishing, and precision inspection. We can process materials from metals to resins! Trust us with your prototype and development component machining. ☆ Please feel free to contact us for a comparative estimate first! ☆

Processing Contract

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

[Processed Parts Performance] Lock Bolt Pin <Industrial Machinery>

Plating processing available! The main materials we can handle include iron, steel, copper, as well as titanium and aluminum.

We would like to introduce our machining achievements of "lock bolt pins" in the industrial machinery industry. The machining processes include turning, threading, and trivalent chromium plating for surface treatment. The processing lot size ranges from 1 to 10 pieces, made from S45C material. We procure general-purpose components such as bolts, as well as mechanical and structural components like bearings, with suitable quality, price, and delivery times. We manage inventory at our logistics center and ensure proper delivery. 【Case Overview (Partial)】 ■Part Name: Lock Bolt Pin ■Sales Industry: Industrial Machinery ■Processing Lot Size: 1 to 10 pieces ■Material: S45C ■Machining Processes: Turning, Threading, Trivalent Chromium Plating *For more details, please download the PDF or feel free to contact us.

企業：森康
価格：Other

bolt

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

[Processed Parts Achievements] Injection Molding Guide Pin <Industrial Machinery>

All cutting processes are key! We will introduce our processing achievements with mold tool steel.

We would like to introduce our processing achievements of "injection molding guide pins" in the industrial machinery industry. The material used is mold tool steel, and the processing method is machining. The dimensions are X200mm, Y10mm, Z32mm. Our company procures general parts such as bolts, as well as mechanical and structural parts like bearings, with appropriate quality, price, and delivery time. 【Case Overview (Partial)】 ■Part Name: Injection Molding Guide Pin ■Sales Industry: Industrial Machinery ■Processing Lot Size: 1 to 10 pieces ■Material: Mold Tool Steel ■Processing Method: Machining *For more details, please download the PDF or feel free to contact us.

企業：森康
価格：Other

Other machine elements

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

PIN(fe) - メーカー・企業と製品の一覧

PINの製品一覧

Jumper wire / jumper pin

Iron split pin

Drift Pin MDP

Current input terminal multi-pin

Corner ejector pin

Cello endpin "Alfe Endpin Antique"

[Processed Parts Performance] Hinge Pin

[Processed Parts Results] Press-fit Pins

[Processed Parts Results] Pin

[Processed Parts Results] Pin

[Processed Parts Performance] Lock Bolt Pin <Industrial Machinery>

[Processed Parts Achievements] Injection Molding Guide Pin <Industrial Machinery>

PINに関連する検索キーワード