Last Updated： Aggregation Period:Jul 09, 2025～Aug 05, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jul 09, 2025～Aug 05, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jul 09, 2025～Aug 05, 2025
This ranking is based on the number of page views on our site.
121～135 item / All 135 items
We provide comprehensive support from heat treatment, plating, to finishing of outer and inner diameters.
We have a wealth of experience in parts for hydraulic valves, particularly with over 300 types of processed spools. We are confident in our machining of seat surfaces, sliding surfaces, and sealing surfaces, which are essential for fluid control!
![[Processing Technology] Custom Parts Processing](https://image.mono.ipros.com/public/product/image/79c/2001484784/IPROS01278862567980118840.png?w=280&h=280)
Anything that can be shaved is fine! We respond to the diverse needs of our customers.
We would like to introduce "Custom Parts Processing" conducted by Morik Engineering Co., Ltd. We manufacture a wide variety of processed parts quickly and efficiently. Anything that can be cut is acceptable. We respond to the diverse needs of our customers and provide high-precision parts. Please feel free to contact us with your requests. 【Supported Materials (Partial)】 ■SUJ2 ■S45C ■S55C ■SS400 ■SCM415 ■SCM440 *For more details, please download the PDF or feel free to contact us.
Mold processing for automatic machines that perform crimping operations on crimp terminals! Feel free to entrust us with single items or small lots.
We would like to introduce our "Automated Machine Mold Parts Processing." We handle the mold processing for automated machines that perform crimping operations for crimp terminals, including dies and punches for connector automated machine molds. Please feel free to contact us when you need our services. 【Features】 ■ High skill level ■ Short delivery times ■ Nationwide support for single items and small lots ■ Overseas production is also possible *For more details, please refer to the PDF materials or feel free to contact us.
Are you struggling with difficult-to-cut materials, 5-axis machining, or cutting processes? Leave the precision machining of small lots of aluminum to us! We have obtained JIS Q 9100 certification.
We would like to introduce a case study of "machined parts" that we processed. We can handle everything from a single prototype to mass production of 100,000 units, and we specialize in the production of small quantities of a wide variety of parts. Since we design and manufacture jigs in-house, we have achieved rapid turnaround and low costs. 【Case Overview】 ■ Application: Machine parts ■ Material: Aluminum ■ Size: Φ100x5 (half section) ■ Supported lot size: 100 to 500 *For more details, please refer to the related links or feel free to contact us.
We also handle products that are difficult to grasp! We specialize in hard-to-cut materials, 5-axis machining, and cutting processes.
We would like to introduce a processing example of "parts used for railway rails" that we have conducted. We accept orders starting from one piece and can accommodate products that are difficult to grasp. We respond to a wide range of requests. Our company has obtained JIS Q 9100 certification and can handle everything from single prototypes to mass production of 100,000 pieces. 【Case Overview】 ■ Material: S50C ■ Size: 30×30×400 ■ Supported Lot Size: 1 *For more details, please refer to the related links or feel free to contact us.
We have NC lathes with bar feeders! We can offer mass-produced items such as pipe cuts and round nuts at low prices.
Shiraishi Co., Ltd. has been steadily processing metal parts in a small town factory. Using our unique technology, we manufacture pepper mills and coffee mills, as well as perform metal cutting and milling. With our NC lathe equipped with a bar feeder, we can offer mass-produced items such as collars, spacers, bosses, dowels, pipe cuts, and round nuts at low prices, which is our strength. We face our customers sincerely every day to ensure that this technology is not lost. 【Business Activities】 ■ Manufacturing and sales of pepper mills, coffee mills, etc. ■ Manufacturing of automotive parts, miscellaneous goods, furniture, construction hardware, etc. ■ Press processing, bending processing, turning, general metal processing *For more details, please refer to the PDF document or feel free to contact us.
DMU50 (5-axis machining center) in operation! Quickly responds to complex shapes!
In a 3-axis machining center composed of three slide axes (X-axis, Y-axis, and Z-axis), the machine's structure limits the approach direction for machining to only the top surface of the workpiece. Therefore, when performing complex and high-precision machining that requires angle determination, it is necessary to first create a fixture to tilt the workpiece and repeatedly grasp and reposition the workpiece. As the work becomes more complex, the 3-axis machining center has disadvantages compared to the 5-axis machining center, such as unstable angle determination accuracy, the need for setup changes, and the requirement for indexing fixtures. In contrast, a 5-axis machining center, which consists of five axes (X-axis, Y-axis, Z-axis, + A-axis (rotational axis relative to the X-axis) or B-axis (rotational axis relative to the Y-axis), + C-axis (rotational axis relative to the Z-axis)), allows for approaches from arbitrary angles to complex workpieces with a lot of angle information. We also accept 5-axis three-dimensional shape machining. When machining vertical wall shapes where the cutting tool cannot reach from the top surface, we can use short-reach cutting tools, enabling us to achieve high surface finish accuracy.
We specialize in processing products with a shaft diameter tolerance of 0.01mm or less for sizes up to 1 inch (φ25.4mm).
【Features】 ■ Track record in the defense industry and civilian aircraft engine parts ■ Supports a wide range of sizes and materials ■ Capable of diverse processing with a rich lineup of equipment ■ Inspection room maintained at 20°C with climate control ■ High-precision measurements using a three-dimensional measuring machine ■ Capable of processing from aluminum to difficult-to-cut materials, with extensive processing know-how and experience
We handle punching and bending with dies! We offer both continuous molds and single molds.
We would like to introduce our "Press Die Parts Processing." We carry out press die processing for crimp terminals in round, Y, R, C, A, I, bar, and chain types. We process parts for crimp terminal press dies and conduct general processing of parts for progressive dies. We perform punching and bending using punches and dies. 【Features】 ■ Processing of parts for crimp terminal press dies ■ General processing of parts for progressive dies ■ Punching and bending using punches and dies *For more details, please refer to the PDF document or feel free to contact us.
Processing of molded molds for automobiles, mobile phones, digital cameras, SD cards, etc.!
We would like to introduce our "Molded Die Parts Processing" that we conduct. Molds for connectors, automotive molds, molds for mobile phones, molds for digital cameras, and more are implemented. Molded dies are divided into core and cavity parts surrounding the molded section, and the two parts are opened to extract the product. 【Types of Processing】 ■ Automotive Molds ■ Mobile Phone Molds ■ Digital Camera Molds ■ SD Card Molds ■ ETC Card Molds *For more details, please refer to the PDF document or feel free to contact us.
Providing high-precision solutions and precision parts in semiconductors, medical, and automotive fields!
We would like to introduce our "Precision Parts Processing." Pressing and sintering are fully vertically integrated from powder to raw materials, mastering the entire process of hard metals and ceramics. We also utilize our own designed compression system and leverage a pressure sintering system to provide high-quality products. 【Materials Used (Partial)】 ■ Tungsten carbide ■ Silicon carbide (SiC) ■ Silicon nitride (Si3N4) ■ Various grades of stainless steel (203, 316, 304, etc.) ■ Alumina/Aluminum oxide (Al2O3) *For more details, please refer to the PDF document or feel free to contact us.
Are you struggling with difficult-to-machine materials, 5-axis processing, or cutting processes? Leave the precision machining of small lots of castings to us! JIS Q 9100 certification obtained.
We would like to introduce a case study of "machined parts" that we processed. There has been a high demand for precision and cost reduction using 5-axis machining, which fully demonstrates the advantages of this technology. Through machining, we achieved both precision and cost performance by simultaneously processing the front and side using 5-axis machining. 【Case Overview】 ■ Application: Parts for machine tools ■ Material: Cast iron ■ Size: 15X20X350 ■ Lot size: 1 to 10 *For more details, please refer to the related links or feel free to contact us.
Compatible with various materials such as different types of steel, iron, and resin!
We would like to introduce the "Parts Processing" conducted at Yamato Seiko Co., Ltd. We can accommodate various materials such as different types of steel (S※C, SK, SKD, SCM, SUJ, SUS, SKH, etc.), iron (FCD, etc.), and plastics. We perform processing with precision as per your request, taking into account the heat treatment process. We are also committed to processing using general-purpose machines, not just automatic machines. 【Supported Materials (Partial)】 ■S※C ■SK ■SKD ■SCM ■SUJ ■SUS *For more details, please download the PDF or feel free to contact us.
