Probeのメーカーや取扱い企業、製品情報、参考価格、ランキングをまとめています。
イプロスは、 製造業 ・ BtoB における情報を集めた国内最大級の技術データベースサイトです。

Probe×ウェーブクレスト - メーカー・企業と製品の一覧

Probeの製品一覧

16～27 件を表示 ／ 全 27 件

表示件数
Opening fixed RF current monitoring probe, opening 25mm

Opening fixed RF current monitoring probe, opening 25mm

RF current monitoring probe with fixed opening to expand the scope of EMC pre-compliance test products.

【TBCP1-200】 The TBCP1-200 is a fixed aperture RF current monitoring probe. The probe has a 3dB bandwidth of approximately 200 MHz. The aperture of the RF current monitoring probe is 25 mm. Its transmission impedance is > 14 dB ohms in the range of 40 kHz to 200 MHz. 【TBCP1-250】 The TBCP1-250 is a fixed aperture RF current monitoring probe. The probe shows a very flat response with a 3dB bandwidth of 250 MHz and is characterized and usable in the frequency range of 30 kHz to 250 MHz. The aperture of the RF current monitoring probe is 25 mm. Its transmission impedance is > 16 dB ohms in the range of 300 kHz to 250 MHz. 【TBCP1-500】 The TBCP1-500 is a fixed aperture RF current monitoring probe. The probe shows a very flat response with a 3dB bandwidth of 500 MHz and is characterized and usable in the frequency range of 30 kHz to 500 MHz. The aperture of the RF current monitoring probe is 25 mm. Its transmission impedance is > 15 dB ohms in the range of 300 kHz to 500 MHz.

  • EMC Testing

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Opening fixed RF current monitoring probe, opening 32mm

Opening fixed RF current monitoring probe, opening 32mm

RF current monitoring probe for fixed openings to expand the scope of EMC pre-compliance test products.

【TBCP4-250】 The TBCP4-250 exhibits a very flat response with a 3dB bandwidth of 250 MHz and is characterized and usable in the frequency range of 10 kHz to 250 MHz. The opening of the RF current monitoring probe is 32 mm. Its transfer impedance is close to 14 dB ohms in the range of 400 kHz to 250 MHz. 【TBCP4-500】 The TBCP4-500 exhibits a very flat response with a 3dB bandwidth of 500 MHz and is characterized and usable in the frequency range of 10 kHz to 500 MHz. The opening of the RF current monitoring probe is 32 mm. Its transfer impedance is close to 16 dB ohms in the range of 400 kHz to 500 MHz. 【TBCP4-750】 The TBCP4-750 exhibits a very flat response with a 3dB bandwidth of 750 MHz and is characterized and usable in the frequency range of 10 kHz to 800 MHz. The opening of the RF current monitoring probe is 32 mm. Its transfer impedance is close to 20 dB ohms in the range of 400 kHz to 750 MHz.

  • EMC Testing

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Opening fixed RF current monitoring probe, opening 17mm

Opening fixed RF current monitoring probe, opening 17mm

RF current monitoring probe with fixed opening to expand the scope of EMC pre-compliance test products.

The TBCP3-1000 is a fixed aperture RF current monitoring probe. It has a very flat response with a 3dB bandwidth of 1 GHz and is characterized and usable over a frequency range of 30 kHz to 1 GHz. The aperture of the RF current monitoring probe is 17 mm. Its transfer impedance is close to 20 dB ohms in the range of 3 MHz to 1 GHz. Tekbox provides calibration fixtures compatible with the TBCP3 series of fixed aperture current probes.

  • EMC Testing

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Snap-on 32mm RF current monitoring probe, maximum 750MHz

Snap-on 32mm RF current monitoring probe, maximum 750MHz

RF current monitoring probe with fixed opening to expand the scope of EMC pre-compliance test products.

The TBCP2-250 shows a very flat response with a 3dB bandwidth of 250 MHz and is characterized over a frequency range of 30 kHz to 300 MHz. Upon request, a test protocol covering a frequency range of 1 kHz to 350 MHz can also be provided. Its transmission impedance is > 12 dB ohms in the range of 700 kHz to 300 MHz. The TBCP2-500 shows a flat response with a 3dB bandwidth of 500 MHz and is characterized over a frequency range of 30 kHz to 600 MHz. Upon request, the test protocol can be extended to frequencies up to 1 kHz. Its transmission impedance is > 15 dB ohms in the range of 1 MHz to 500 MHz. The TBCP2-750 shows a very flat response with a 3dB bandwidth of 750 MHz and is characterized over a frequency range of 30 kHz to 800 MHz. Upon request, the test protocol can be extended to frequencies up to 1 kHz. Its transmission impedance is > 15 dB ohms in the range of 1 MHz to 750 MHz. The opening of the RF current monitoring probe is 32 mm.

  • EMC Testing

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Coaxial RF current monitoring probe 10Hz to 600MHz

Coaxial RF current monitoring probe 10Hz to 600MHz

Equipped with a 3dB bandwidth from 400kHz to 600MHz and a very flat response from 1MHz to 200MHz.

**Product Overview** The TBCCP1-400K600 is a coaxial RF current monitoring probe that expands Tekbox's range of affordable EMC pre-compliance test equipment. This probe features a 3 dB bandwidth from 400 kHz to 600 MHz and a very flat response from 1 MHz to 200 MHz. The transimpedance is characterized over a frequency range of 10 Hz to 100 MHz. The TBCCP1-400K600 is primarily designed as a transducer for passive loop antennas or for measuring RF current in coaxial cables. The probe is equipped with an N connector and can be connected to a standard tripod via an attachment with a ¼ inch screw.

  • Other electronic measuring instruments
  • EMC Testing

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Coaxial RF current monitoring probe 10Hz to 100MHz

Coaxial RF current monitoring probe 10Hz to 100MHz

Equipped with a 3dB bandwidth from 3kHz to 100MHz and a very flat response from 9kHz to 30MHz.

**Product Overview** The TBCCP1-3K100 is a coaxial RF current monitoring probe that expands Tekbox's range of affordable EMC pre-compliance testing equipment. This probe features a 3 dB bandwidth from 3 kHz to 100 MHz and a very flat response from 9 kHz to 30 MHz. The transimpedance is characterized over a frequency range of 10 Hz to 100 MHz. The TBCCP1-3K100 is primarily designed for use as a converter for active loop antennas or for measuring RF current in coaxial cables. The probe is equipped with an N connector and can be connected to a standard tripod via an attachment with a ¼ inch screw.

  • Other electronic measuring instruments
  • EMC Testing

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Coaxial RF current monitoring probe 10Hz to 100MHz

Coaxial RF current monitoring probe 10Hz to 100MHz

It shows a very flat response from 2kHz to 70MHz, covering a frequency range from 10Hz to 100MHz.

【Product Overview】 The TBCCP1-2K70 is a coaxial RF current monitoring probe that expands Tekbox's range of affordable EMC pre-compliance test equipment. This probe exhibits a very flat response from 2 kHz to 70 MHz and is characterized over a frequency range of 10 Hz to 100 MHz. The TBCCP1-2K80 is designed to be used as a transducer for applications that require measuring RF currents from large loop antennas or coaxial cables. With a transimpedance of 0 dBΩ, it complies with the specifications for large loop antennas (LLA) as per CISPR 15 (EN 555015) and CISPR 16-1-4.

  • Other electronic measuring instruments
  • EMC Testing

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
RF surface current monitoring probe 30kHz to 600MHz

RF surface current monitoring probe 30kHz to 600MHz

It shows a very flat response from 10MHz to 500MHz, covering a frequency range from 9kHz to 600MHz.

**Product Overview** The TBSCP1-10M500 is an RF surface current monitoring probe that expands Tekbox's range of affordable EMC pre-compliance testing equipment. This probe exhibits a very flat response from 10 MHz to 500 MHz and is characterized over a frequency range of 9 kHz to 600 MHz. The TBSCP1-10M500 is designed for RF current monitoring applications where it is necessary to measure RF currents flowing on surfaces such as PCB ground planes or traces, metal planes, or wires. The footprint of the RF current monitoring probe is 40 mm x 15 mm. The transfer impedance is -5 dB ohms, and the standard 3 dB bandwidth is from 10 MHz to 500 MHz.

  • Other electronic measuring instruments
  • EMC Testing

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Snap-on bulk current injection probe for industrial products

Snap-on bulk current injection probe for industrial products

Designed for conducted immunity testing primarily in the frequency range of 150 kHz to 230 MHz, in accordance with the standard IEC/EN61000-4-6.

**Product Overview** The TBBCI1-200K280 is a Snap-On bulk current injection probe. The BCI probe is designed primarily for conductive immunity testing in the frequency range of 150 kHz to 230 MHz, in accordance with the standard IEC / EN 61000-4-6. The insertion loss is 8 dB over most of the bandwidth, fully complying with the insertion loss specifications of IEC / EN 61000-4-6. The probe is individually characterized and can be used in the frequency range of 10 kHz to 300 MHz. According to IEC/EN 61000-4-6, it can inject into conductive immunity test setups at severity levels 1, 2, 3, and level X, up to 30V. This probe can also be used for RF current monitoring applications. The opening of the RF current monitoring probe is 27 mm. The standard insertion loss is 8 dB, and the standard transfer impedance is 26 dB ohms.

  • Other electronic measuring instruments
  • EMC Testing

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Snap-on bulk current injection probe for automotive products

Snap-on bulk current injection probe for automotive products

Designed for conducted immunity testing of automotive products primarily in the frequency range of 1MHz to 400MHz according to standard ISO11452-4.

**Product Overview** The TBBCI1-800K420 is a Snap-On bulk current injection probe. The BCI probe is designed primarily for conducting immunity testing of automotive products in accordance with standard ISO11452-4, mainly in the frequency range of 1 MHz to 400 MHz. The insertion loss is 5 dB over most of the bandwidth. It complies with the insertion loss specifications of ISO11452-4 in the frequency range of 250 kHz to 230 MHz. The probe is individually characterized and can be used in the frequency range of 10 kHz to 450 MHz. This probe can be used for injections of severity I (60mA), II (100mA), III (150mA), IV (200mA), and customer-specific severity V (up to 350 mA). This probe can also be used for RF current monitoring applications. The opening of the RF current monitoring probe is 27 mm. The standard insertion loss is 5 dB, and the standard transfer impedance is 26 dB ohms.

  • Other electronic measuring instruments
  • EMC Testing

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
WP-WiFi Probe

WP-WiFi Probe

WiFi 2.45GHz band electric field measurement

【Features】 - WiFi 2.45GHz frequency probe - Isotropic & true RMS measurement - High sensitivity 0.04V/m - High out-of-band attenuation - Electric field

  • EMC Testing
  • Strength Testing Equipment
  • Other electronic measuring instruments

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Wavecontrol Magnetic Field Probe WPH1000

Wavecontrol Magnetic Field Probe WPH1000

The new WPF1000 magnetic field probe features a high sensitivity of 0.018 A/m, isotropic RMS measurement, and complies with international standards.

New H-field broadband probe WPH1000 from Wavecontrol! High sensitivity of 0.018 A/m, isotropic RMS measurement, and compliant with international standards for magnetic field probe WPF1000. 【Main Features】 - High sensitivity - Isotropic & RMS measurement - Excellent attenuation - Compliant with international standards

  • EMC Testing
  • Strength Testing Equipment
  • Other electronic measuring instruments

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Probeに関連する検索キーワード

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.