We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Probe.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Probe×テクノプローブ - List of Manufacturers, Suppliers, Companies and Products

Probe Product List

31～44 item / All 44 items

Displayed results
RF_MEMS Probe "TPWR12"

RF_MEMS Probe "TPWR12"

Selectable probe pitch from 50 to 1,000 µm! The contact resistance (to gold pads) is 0.05 ohms.

We would like to introduce our RF_MEMS probe 'TPWR12' that we handle. The breakdown voltage is 100V, and the rated current is 1A, with a contact life (when using an auto-prober) of 1 million cycles. Please feel free to contact us when you need assistance. 【Features】 ■ Low loss, low reflection air coplanar probe design ■ Small probe footprint ■ Probe pitch can be selected from 50 to 1,000um ■ Probe repair and tip chip replacement available (Repair may not be possible depending on the damage condition) *For more details, please refer to the PDF document or feel free to contact us.

  • probe

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
RF MEMS Probe "TPWR15"

RF MEMS Probe "TPWR15"

Probe repair and tip chip replacement available! Contact resistance (to gold pad) is 0.05 ohm.

We would like to introduce our RF_MEMS probe 'TPWR15' that we handle. The reflection loss (typ. GSG-150um pitch) is -5.0dB, the power tolerance is 5W, and the probe mark size (width) is less than 30um. Please feel free to contact us when you need assistance. 【Features】 ■ Low loss, low reflection air coplanar probe design ■ Small probe scars ■ Probe pitch selectable from 50 to 1,000um ■ Probe repair and tip chip replacement available (Repair may not be possible depending on the damage condition) *For more details, please refer to the PDF document or feel free to contact us.

  • probe

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
RF MEMS Probe "WR8-Tall Series"

RF MEMS Probe "WR8-Tall Series"

Selectable probe pitch from 50 to 1,000 µm! Probe mark size (width) is 30 µm or less.

We would like to introduce our RF_MEMS probe, the 'WR8-Tall Series'. The reflection loss (GSG-150um pitch typ.) is -10.0dB, and the power handling is 5W, with a recommended needle pressure (overdrive = 20-30um) of 20gf. Please feel free to contact us if you have any inquiries. 【Features】 ■ Low loss, low reflection air coplanar probe design ■ Small probe footprint ■ Probe pitch selectable from 50 to 1,000um ■ Probe repair and tip chip replacement available (Note: Repair may not be possible depending on the damage condition) *For more details, please refer to the PDF document or feel free to contact us.

  • probe

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
RF MEMS Probe "WR12-Tall Series"

RF MEMS Probe "WR12-Tall Series"

Probe repair and tip replacement possible! Rated voltage 100V, rated current 1A.

We would like to introduce our RF_MEMS probe, the 'WR12-Tall Series'. The probe's needle material is nickel alloy, and the housing material is aluminum alloy, with a probe mark size (width) of less than 30um. Please feel free to contact us when you need assistance. 【Features】 ■ Low loss, low reflection air coplanar probe design ■ Small probe scars ■ Probe pitch selectable from 50 to 1,000um ■ Probe repair and tip chip replacement available (Repair may not be possible depending on the damage condition) *For more details, please refer to the PDF document or feel free to contact us.

  • probe

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
RF MEMS Probe "WR15-Tall Series"

RF MEMS Probe "WR15-Tall Series"

Low loss, low reflection air coplanar probe design! The needle material is nickel alloy.

We would like to introduce the 'WR15-Tall Series' that we handle. The contact life (when using an auto-prober) is 1 million cycles, with a withstand voltage of 100V, a withstand current of 1A, and a power rating of 5W. Please feel free to contact us when you need assistance. 【Features】 ■ Low loss, low reflection air coplanar probe design ■ Small probe footprint ■ Probe pitch selectable from 50 to 1,000um ■ Probe repair and tip replacement available (Note: Repair may not be possible depending on the condition of damage) *For more details, please refer to the PDF document or feel free to contact us.

  • probe

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
RF Cantilever Probe "Cantilever Series"

RF Cantilever Probe "Cantilever Series"

Supports up to 10 ports! Flexible probing performance with cantilever structure.

We would like to introduce the RF_Cantilever probe, part of our "Cantilever Series." This probe features a cantilever design optimized for RF probes, allowing for custom configurations and pitch. Additionally, it can be modified for high-power device measurement probes. Please feel free to contact us if you have any inquiries. 【Features】 ■ Low-loss, low-reflection coaxial probe design (up to 67GHz) ■ Custom manufacturing for flexible layouts ■ Supports up to 10 RF ports (additional RF ports can be considered upon request) ■ Custom calibration kits can be manufactured, providing optimized constants ■ Short lead time (2 weeks or more) *For more details, please refer to the PDF document or feel free to contact us.

  • probe

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Document] TCS3-100 Calibration Board Instruction Manual

[Document] TCS3-100 Calibration Board Instruction Manual

Equipped with a high-precision load pad with an accuracy of ±0.3%! Introducing the product's applications and the position of the elements.

This document presents the specifications of the custom calibration board "TCS3-100" that can be manufactured with a dedicated calibration kit in a tabular format. The arrangement is GSGSG, the pad size is 50μm × 50μm, and the pad pitch is 100μm. It is a simple and easy-to-reference booklet. Please take a moment to read it. 【Contents (partial)】 ■ Pattern name ■ Mounted component symbols ■ Applications ■ Component positions *For more details, please refer to the PDF document or feel free to contact us.

  • Printed Circuit Board

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Document] TCS3-125-2 Calibration Board Manual

[Document] TCS3-125-2 Calibration Board Manual

Manufacturing of a dedicated calibration kit is possible (custom)! Introducing the specifications of TCS3-125-2.

This document includes the pattern names and other details of the calibration board "TCS3-125-2," which is equipped with a high-precision load pad of ±0.3%. It is a SOLT/TRL calibration device with a pad pitch of 125μm. It is a simple and easy-to-reference book. Please take a moment to read it. 【Contents (partial)】 ■ Pattern names ■ Component symbols ■ Applications ■ Component positions *For more details, please refer to the PDF document or feel free to contact us.

  • Printed Circuit Board

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Document] TCS3-200 Calibration Board Instruction Manual

[Document] TCS3-200 Calibration Board Instruction Manual

Pad pitch 175–225μm! Introducing the element symbols and positions of the TCS3-200.

This document contains the specifications for the calibration board "TCS3-200" handled by Techno Probe Inc. We introduce pattern names such as Loop-Back Thru1 and Cross Thru1. It is a simple and easy-to-reference book. Please take a moment to read it. 【Contents (partial)】 ■ Pattern List ■ Substrate Top View *For more details, please refer to the PDF document or feel free to contact us.

  • Printed Circuit Board

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Data] TCS4-125/175 Calibration Board Instruction Manual

[Data] TCS4-125/175 Calibration Board Instruction Manual

SOLT/TRL calibrator! Introducing array, pad size, pad pitch, and more.

This document includes the calibration board "TCS4-125/175," which can be used for alignment marks and more. It introduces pattern names, mounted component symbols, and more. It is a simple and easy-to-reference book. Please take a moment to read it. 【Contents (partial)】 ■ Pattern names ■ Mounted component symbols ■ Applications ■ Component positions *For more details, please refer to the PDF document or feel free to contact us.

  • Printed Circuit Board

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Document] TCS4-200/250 Calibration Board Manual

[Document] TCS4-200/250 Calibration Board Manual

Pad size 65μm × 50μm! Introducing the substrate top view and pattern list.

This document includes the calibration board "TCS4-200/250" handled by Techno Probe Inc. It introduces the arrangement, pad pitch, applications, and positions of the components. It is a simple and easy-to-reference booklet. Please take a moment to read it. 【Contents (partial)】 ■ Pattern Name ■ Mounted Component Symbols ■ Applications ■ Positions of Components *For more details, please refer to the PDF document or feel free to contact us.

  • Printed Circuit Board

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Document] TCS4-225/275 Calibration Board Instruction Manual

[Document] TCS4-225/275 Calibration Board Instruction Manual

Introducing the TCS4-225/275 calibration board equipped with a high-precision load pad of ±0.3%!

This document features the SOLT/TRL calibration device "TCS4-225/275" provided by Techno Probe Inc. We introduce the substrate top view and pattern list. It is a simple and easy-to-reference book. Please take a moment to read it. 【Contents (partial)】 ■Pattern name ■Component symbol ■Application ■Component position *For more details, please refer to the PDF document or feel free to contact us.

  • Printed Circuit Board

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Document] TCS4-300 Calibration Board Instruction Manual

[Document] TCS4-300 Calibration Board Instruction Manual

SOLT/TRL calibrator! Introducing the pattern name, mounted element symbols, applications, and the position of the elements.

This document features the SOLT/TRL calibrator "TCS4-300," which is equipped with a ±0.3% high-precision load pad. We introduce the arrangement, pad size, and pad pitch. It is a simple and easy-to-reference booklet. Please take a moment to read it. 【Contents (partial)】 ■ Substrate top view ■ Pattern list *For more details, please refer to the PDF document or feel free to contact us.

  • Printed Circuit Board

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
【NEW】HP Series/HPD Series (High Power RF Probe)

【NEW】HP Series/HPD Series (High Power RF Probe)

Achieves power handling of up to 40GHz and up to 50W (5A/1000V). Accurate measurement of RF high-power devices is possible.

○ Fusion of the latest high-frequency technology and mechanical performance ○ Adoption of special materials with excellent power handling ○ Design suitable for characteristic evaluation of various high-power devices represented by GaN (gallium nitride) and SiC (silicon carbide) ○ Robust probe tip ○ Uniform flatness and stable contact

  • probe

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Probe

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.