Release Agent Product List and Ranking from 79 Manufacturers, Suppliers and Companies

High-performance continuous release agent Fluorosurf CFRP molding introduction case study

Even difficult molding that cannot be released with regular release agents can be continuously released. On top of that, there is no need for cleaning as there is no transfer to the molded product!

"FloroSurf FG-5093" is a mold release agent made by dissolving a special fluoropolymer in a non-flammable fluorinated solvent. By applying it, the adhesion of the surface molding resin is reduced, demonstrating excellent release properties even for complex and precise shapes. It is particularly effective in cases where conventional release agents fail to work. It has outstanding durability, with a proven track record of continuous release for thousands of shots, and reapplication using a brush or spray can restore its performance. 【Case Study in Thin CFRP Molding】 1. Background Introduction In the thin molding of carbon fiber, such as separators for fuel cells, conventional release agents caused cracking during demolding, resulting in only about one good product out of ten sheets, leading to the abandonment of mass production. 2. Implementation Results By using FloroSurf FG-5093, continuous molding of 1,000 shots became possible, leading to the decision for mass production. Additionally, there is no transfer to the molded products, eliminating the need for cleaning and significantly shortening the process. *If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Coating Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Case] Continuous operation by reducing the formation of flash in extrusion molding nozzles.

Apply to the mouthpiece on-site. Simply air dry at room temperature to reduce haze. Significant improvement in productivity.

【Issue】 - Currently, mold release occurs after 5-10 minutes of continuous operation. We would like to extend this to approximately 60 minutes if possible. 【Solution Example】 By applying 'FloroSurf FG-5093' to the nozzle, continuous molding for 120 minutes becomes possible! FloroSurf FG-5093 is a mold release agent made by dissolving a special fluororesin in a non-flammable fluorinated solvent. By applying it, the adhesion of the molding resin to the surface is reduced, demonstrating excellent release properties even for complex and precise shapes. It is particularly effective in situations where conventional release agents do not work well. It boasts excellent durability, with a proven track record of continuous release for thousands of shots, and its performance can be restored by reapplying with a brush or spray. *If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Coating Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Fluorine-based release agent that can be applied on-site: Fluorosurf FG-5093.

Please try this when regular release agents do not work well. It offers overwhelming continuous release properties. Easy to apply with a brush or spray. Dries at room temperature in 5 minutes after application.

The "Fluoro Surf FG-5093" is a mold release agent made by dissolving a special fluororesin in a non-flammable fluorinated solvent. After application, a non-stick property is imparted to the mold surface within 5 minutes of air drying at room temperature. The adhesion of the molded resin to the mold is reduced, demonstrating excellent continuous release even for complex and precise shapes. Please try it in cases where conventional release agents do not work well. It boasts excellent durability, with a proven track record of continuous release over thousands of shots, and reapplication using a brush or spray can restore its performance. 【Features】 ■ Strongly adheres to the mold material, enabling continuous release ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds ■ Easily applied with a brush or spray gun, with a 10-minute air drying time at room temperature. No need for outsourcing processing ■ No need to remove the film during reapplication ■ No transfer of release agent components, eliminating the need for cleaning of molded products ■ Low odor and non-flammable, maintaining a good working environment Applying it to the extrusion molding nozzle can also reduce flash. *If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Coating Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

On-site construction fluorine-based release agent - No need to clean the work! FluoroSurf

Please try this when regular release agents do not work well. Outstanding continuous release properties. Easy to apply with a brush or spray. Dries at room temperature in 5 minutes after application.

The "Fluoro Surf FG-5093/5095 Series" is a mold release agent made by dissolving a special fluororesin in a non-flammable fluorinated solvent. Just one application provides a non-stick surface on the mold. It reduces the adhesion of molded resin to the mold, demonstrating excellent continuous release properties even for complex and precise shapes. Please try it in cases where conventional release agents do not work well. It has excellent durability and a proven track record of continuous release, and its performance can be restored by reapplying with a brush or spray. 【Features】 ■ Strongly adheres to the mold material, enabling continuous release ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds ■ Can be easily applied with a brush or spray gun, and dries at room temperature in 10 minutes. No need for external processing ■ No need to remove the film during reapplication ■ No transfer of release agent components, eliminating the need for cleaning of molded products ■ Low odor and non-flammable, maintaining a good working environment Applying it to the extrusion molding nozzle can also reduce streaking. *If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Coating Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

In-house fluorine surface treatment of molds - non-stick release agent FluoroSurf.

Fluorine-based dry release agent. Please try it when regular release agents do not work well. Outstanding continuous release properties. Easy to apply and dries at room temperature in 5 minutes. No cleaning of molded products required.

The "Fluoro Surf FG-5093, 5095, 5097 Series" is a mold release agent made by dissolving a special fluororesin in a non-flammable fluorinated solvent. Just one application provides a non-stick surface to the mold. It reduces the adhesion of molding resins to the mold, demonstrating excellent continuous release properties even for complex and precise shapes. Please try it in cases where conventional release agents do not work well. It has excellent durability and a proven track record of continuous release, and its performance can be restored by reapplying with a brush or spray. 【Features】 ■ Strongly adheres to the mold material, enabling continuous release ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds ■ Easily applied with a brush or spray gun, and dries at room temperature in 10 minutes. No need for outsourcing processing ■ No need to remove the film during reapplication ■ No transfer of release agent components, eliminating the need for cleaning of molded products (FG-5093, 5095) ■ Low odor and non-flammable, maintaining a good working environment Applying it to the die of extrusion molding can also reduce haze. *If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Coating Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Dry release agent Fluorosurf FG-5093 silicone-free

A dry release film is formed on the surface of the mold. Release properties are improved, and cleaning of the molded product is unnecessary. It is non-flammable and safe, plus it can be easily applied. It does not contain silicone-based compounds.

The "FloroSurf FG-5093" is a fluorine-based dry mold release agent. It does not contain silicone, ensuring that molded products remain clean and do not require washing. By applying it, the adhesion of the surface molding resin is reduced, demonstrating excellent release properties even for complex and precise shapes. It is particularly effective in situations where conventional release agents fail to work. It boasts outstanding durability, with a proven track record of continuous release over thousands of shots, and reapplication using a brush or spray can restore its performance. 【Features】 ■ Strongly adheres to mold materials, allowing for continuous release ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds ■ Can be easily applied with brushes or spray guns, eliminating the need for outsourcing processing ■ No need to remove the film during mold modifications ■ No transfer of release agent components, eliminating the need for cleaning molded products ■ Low odor and non-flammable, maintaining a good working environment *If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Coating Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Continuous release dry release agent "Silicone-free" "No cleaning of molded products required"

A dry release film is formed on the surface of the mold. Release properties are improved, and cleaning of the molded product is unnecessary. It is non-flammable and safe, plus it can be easily applied. It does not contain silicone-based compounds.

The "FloroSurf FG-5093" is a fluorine-based dry mold release agent. It does not contain silicone, preventing contamination of molded products and eliminating the need for cleaning. By applying it, the adhesion of the surface molding resin is reduced, demonstrating excellent release properties even for complex and precise shapes. It is particularly effective in situations where conventional release agents fail to perform. It boasts outstanding durability, with a proven track record of continuous release over thousands of shots, and reapplication with a brush or spray can restore its performance. 【Features】 ■ Strongly adheres to mold materials, enabling continuous release ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds ■ Can be easily applied with brushes or spray guns, eliminating the need for outsourcing processing ■ No need to remove the film during mold modification ■ No transfer of release agent components, eliminating the need for cleaning of molded products ■ Low odor and non-flammable, maintaining a good working environment *If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Coating Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Release agent, excellent release properties, PFOS and PFOA free, non-VOC.

A dry release film is formed on the surface of the mold. Release properties are significantly improved, and cleaning of the molded products is unnecessary. It is non-flammable and safe, plus it can be easily applied. It does not contain silicone-based compounds.

The "FloroSurf FG-5093" is a fluorine-based dry mold release agent. It is free of silicone, preventing contamination of molded products, and eliminates the need for cleaning the molded items. No regulated substances such as PFOS or PFOA are used. Additionally, it is not classified as a VOC. By applying it, the adhesion of the surface molding resin is reduced, demonstrating excellent release properties even for complex and precise shapes. It is particularly effective in situations where conventional release agents fail to work properly. It boasts excellent durability, with proven continuous release performance over thousands of shots, and reapplication with a brush or spray can restore its effectiveness. 【Features】 - Strongly adheres to mold materials, enabling continuous release. - The film thickness is only a few nanometers, suitable for nano and sub-micron level molds. - Can be easily applied with brushes or spray guns, eliminating the need for outsourcing processing. - No need to remove the film during mold modification. - No transfer of release agent components, eliminating the need for cleaning molded products. - Low odor and non-flammable, maintaining a good working environment. *If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Coating Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Fingerprint-resistant coating. Easy application. Just apply and let it air dry at room temperature!

Strongly suppresses the adhesion of fingerprints and dirt on various materials! Wiping off becomes easy. Can be easily applied at room temperature. Reapplication on-site is also simple.

By applying an anti-fouling coating, fingerprints, oils, and water stains become less likely to adhere and can be easily removed. This helps reduce the hassle of daily maintenance. 【This is effective in the following cases】 ■ Want to easily remove fingerprints from touch panel surfaces. ■ Want to improve the smoothness of the touch panel and enhance the user experience. ■ Aim to reduce the cleaning time for fingerprints and dirt. ■ Need a durable anti-fouling coating that does not change the appearance. ■ Scale (white stains) adheres to metal surfaces and becomes difficult to remove. ■ Fingerprints are noticeable on stainless steel control panels and inner doors. ■ Improve the light transmittance of films used on displays and prevent fingerprints. ■ Increase smoothness during operation. *If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Coating Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Mold surface treatment agent allows for continuous release. Easy application on-site.

Please try this when you have difficulty with resin molding. It demonstrates overwhelming continuous release properties. After application in the molding area, air dry for 2 minutes at room temperature.

The "Fluoro Surf FG-509X" is a surface treatment agent that allows for fluorine processing on the surface by applying it to resin-molded molds, enabling continuous release. It can be easily applied on-site using a brush, spray gun, or wiping. After application, it dries at room temperature in just 2 minutes. (This product does not contain any PFAS regulated substances such as PFOA, PFOS, or PFHxS.) * This surface treatment bonds to the mold surface, creating a durable release film that allows for continuous release. * It can also be applied to molds that have been conventionally fluorinated, further improving release properties. * The film thickness is only a few nanometers, making it suitable for nano and sub-micron level molds and nano imprinting, accurately reproducing precise surfaces. * It is non-flammable and does not contain organic solvents, eliminating the need for explosion-proof equipment, quantity management, and environmental measurement as stipulated by fire and safety laws. A water-based model "FG-505W" is also available as a VOC countermeasure model. * There is no need to remove the residual film during reapplication; you can simply apply another layer. * It has good gas release properties, reduces gas staining, and improves flow. * If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Coating Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Water-based release agent "high performance and continuous release possible" "dry non-transfer" "VOC countermeasure product"

Please try this when regular release agents do not work well. Outstanding continuous release properties. Application is easy; it can be applied on the molding site and dries at room temperature in just 5 minutes. Contains no regulated substances!

"FluoroSurf FG-5095W" is a fluorine treatment agent (release agent) for water-based resin molding molds. (This product does not contain any PFAS regulated substances such as PFOA/PFOS/PFHxS.) * Fluorine release processing can be easily applied on-site using a brush or spray gun. * The release component reacts and bonds to the mold surface, providing durability and continuous release properties. * The release agent component is dry and does not transfer to the molded product, eliminating the need for cleaning. * When the release performance decreases, reapplication will restore its effectiveness. * Applying it to the nozzle of extrusion molds can also reduce blushing. * It is water-based and does not fall under VOC regulations. It is non-flammable and does not contain organic solvents, making it easy to manage without the regulations stipulated by fire and safety laws. * The film thickness is only a few nanometers, suitable for nano and sub-micron level molds and nano imprinting, accurately reproducing precise surfaces. * If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Coating Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

46612N Knockout - Paintable with non-silicone type

46612N Knockout Non-silicone based, paintable, 1 piece, 12 pieces, 425ml, slide.

46612N Knockout Special Release Agent 425ml Slide 1 bottle 12 bottles This is a non-silicone release agent that can be painted. US food standard certified. Chlorine-free. Maximum usage temperature 232°C. This release agent is used in areas where others have not succeeded. It allows for clean removal of parts that tend to stick, and it has obtained standards for indirect contact with food in the United States. It provides a thin, dry coating that extends the number of shots.

Company：ツールシステムツールエクスプレス
Price：Other

Lubricants
Other consumables

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

"Can provide release properties" 'IT68S-KS'

Reducing surface friction coefficient! Introducing products that can be processed on various substrates.

Are you looking for a method to impart release properties to general-purpose materials? The "IT68S-KS" performs a unique silicone rubber-based surface treatment on the surface of substrates (metal, synthetic rubber) that do not have release properties, allowing it to impart release properties equivalent to those of silicone rubber. 【Features of IT68S-KS】 ■ Reduces surface friction coefficient ■ Prevents static electricity generation ■ Can impart release properties ■ Applicable to various substrates *For more details, please refer to the PDF document or feel free to contact us.

Company：持田商工
Price：Other

Rubber

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

"Structol" water-based release agent for molds (heat-cured crosslinking type)

Forming a flexible and tough release film on the mold surface.

The use of mold release agents is a common method to facilitate the removal of vulcanized rubber products from molds and increase productivity. Among them, the mold release agent products from Sil + Zailach form a flexible and robust release (crosslinking) film on the mold surface. The durability of the film is long-lasting, and high production efficiency/economics can be expected. It is essential to ensure a clean mold surface at the beginning and to apply the release agent while the mold is heated to vulcanization temperature (to prevent gas adsorption from the atmosphere) for optimal performance. ■ Excellent release effect, quick and easy removal of vulcanized products ■ Outstanding durability against various types of vulcanization ■ Reduction of mold contamination / improvement of product surface / increased mold flow ■ Reduction of time loss in mold cleaning (decrease in cleaning frequency) ■ Increase in the number of acceptable products

Company：エスアンドエスジャパン
Price：Other

Chemicals

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

A compact-sized oil fence that is easy to carry.

For those struggling with storage space for oil fences! Easy! Lightweight! Space-saving! "T-6HD Oil Fence"

The "T-6HD Oil Fence" is an inflatable oil fence that combines ease of use, lightweight design, and compactness. The special sponge built into the float section expands upon absorbing water. No tools are required, allowing for quick deployment by a small team. It's perfect for those who are struggling with limited storage space and for initial response during oil spill incidents! 【Features】 - The special sponge built into the float section absorbs water and expands within 5 minutes. - It contains oil and prevents further damage. - It is suitable for space-saving storage. - Deploying 25 meters takes about 15 minutes with two people. *For more details, please refer to the PDF document or feel free to contact us.

Company：高階救命器具
Price：Other

Food environmental hygiene/contamination prevention equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Release Agent Product List and Ranking from 79 Manufacturers, Suppliers and Companies

Release Agent Manufacturer, Suppliers and Company Rankings

Release Agent Product ranking