Release Agent Product List and Ranking from 41 Manufacturers, Suppliers and Companies

Chemical reaction type oil-based "concrete release agent" low viscosity and improved rust prevention performance type.

Type with improved rust prevention performance for low viscosity standard products! A concrete release agent suitable for small formwork and small road products!

Introducing "Dispane A-21AR," a low-viscosity chemical reaction type concrete release agent using virgin oil (new oil) with improved rust resistance. < Features > ■ The base oil is made from virgin oil (new oil). ■ The formation of a metal soap film is strong, providing excellent release performance. ■ It reduces the adhesion of slurry to the formwork, thereby minimizing cleaning work and improving work efficiency. ■ It suppresses air bubbles on the concrete surface, resulting in a smooth and beautiful product finish. ■ It leaves minimal oil stains on the concrete surface, ensuring that the adhesion of finishing materials such as mortar and oil-based paints is not compromised during finishing work. * Since it is a chemical reaction type, please avoid excessive application. < Specifications > ■ Oil-based straight type (low viscosity) ■ Improved rust resistance compared to Dispane A-20 ■ Suitable for small concrete products and concrete block masonry. * For more details, please refer to the PDF document or feel free to contact us.

Company：中国興業
Price：Other

Lubricants
Other consumables

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Chemical reaction type oil-based "concrete release agent" with improved medium viscosity and defoaming performance!

Type with improved defoaming performance for medium viscosity! A concrete release agent suitable for medium to large concrete products, concrete blocks, and general civil engineering and construction.

Introducing "Dispane GS-1," a chemical reaction-type concrete release agent that uses virgin oil (new oil) and is designed to improve medium viscosity and defoaming properties. <Features> ■ Base oil is made from virgin oil (new oil) ■ Forms a strong metal soap film, providing excellent release performance ■ Reduces the adhesion of sludge to molds, improving work efficiency by minimizing mold cleaning tasks ■ Suppresses air bubbles on the concrete surface, resulting in a smooth and beautiful product finish ■ Leaves minimal oil stains on the concrete surface, ensuring that the adhesion of finishing materials such as mortar and oil-based paints is not compromised during finishing work * Since it is a chemical reaction type, please avoid excessive application. <Specifications> ■ Oil-based straight type (medium viscosity) ■ Suitable for medium to large concrete products and concrete block stacking ■ Well-suited for general civil engineering and construction use * For more details, please refer to the PDF document or feel free to contact us.

Company：中国興業
Price：Other

Lubricants
Other consumables

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Chemical reaction-type oil-based "concrete release agent" with improved defoaming and sludge suppression effects!

A concrete release agent with improved defoaming performance and sludge suppression effect in a medium viscosity type! Suitable for medium to large concrete products and concrete block stacking.

Introducing "Dispane GS-3," a chemical reaction type concrete release agent using virgin oil (new oil) that enhances medium viscosity, defoaming properties, and slime suppression effects. < Features > ■ Base oil is made from virgin oil (new oil) ■ Forms a strong metal soap film, providing excellent release performance ■ Reduces the adhesion of slime to molds, improving work efficiency by lessening mold cleaning tasks ■ Suppresses bubbles on the concrete surface, resulting in a smooth and beautiful product finish ■ Leaves minimal oil stains on the concrete surface, ensuring that the adhesion of finishing materials such as mortar and oil-based paints is not compromised during finishing work * Since it is a chemical reaction type, please avoid excessive application. < Specifications > ■ Oil-based straight type (medium viscosity) ■ Suitable for medium to large concrete products and concrete block stacking ■ Ideal for general civil engineering and construction use * For more details, please refer to the PDF document or feel free to contact us.

Company：中国興業
Price：Other

Lubricants
Other consumables

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Chemical reaction type oil-based "concrete release agent" suitable for marine concrete products.

High viscosity type! Suitable for marine concrete products such as fish reefs, wave-dissipating blocks, and tetrapods!

We would like to introduce 'Disspane C-14', a high-viscosity chemical reaction type concrete release agent that uses virgin oil (new oil). < Features > ■ The base oil is made from virgin oil (new oil). ■ The formation of a metal soap film is strong, providing excellent release performance. ■ It is difficult for sludge to adhere to the formwork, reducing cleaning work and improving work efficiency. ■ It suppresses bubbles on the concrete surface, resulting in a smooth and beautiful product finish. ■ It leaves little oil staining on the concrete surface, so it does not compromise the adhesion of finishing materials such as mortar or oil-based paints during finishing work. * As it is a chemical reaction type, please avoid excessive application. < Specifications > ■ Oil-based straight type (high viscosity) ■ Suitable for marine concrete products such as artificial reefs, wave-dissipating blocks, and tetrapods. ■ Ideal for prestressed concrete and large civil engineering projects. * For more details, please refer to the PDF document or feel free to contact us.

Company：中国興業
Price：Other

Lubricants
Other consumables

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Research Material] Global Market for Organic Friction Modifier Additives

World Market for Organic Friction Modifiers Additives: Polymers, Fatty Acids, Esters and Amides, Others, Automotive Lubricants, Industrial Lubricants, Aviation Lubricants, ...

This research report (Global Organic Friction Modifier Additives Market) investigates and analyzes the current status and outlook for the global market of organic friction modifier additives over the next five years. It includes information on the overview of the global organic friction modifier additives market, trends of major companies (sales, selling prices, market share), market size by segment, market size by major regions, and distribution channel analysis. The market segments by type include polymers, fatty acids, esters/amides, and others, while the segments by application cover automotive lubricants, industrial lubricants, aerospace lubricants, energy, and railways. The regional segments calculate the market size of organic friction modifier additives by dividing them into North America, the United States, Europe, Asia-Pacific, Japan, China, India, South Korea, Southeast Asia, South America, the Middle East, and Africa. It also includes the market share of major companies in organic friction modifier additives, product and business overviews, and sales performance.

Company：マーケットリサーチセンター
Price：Other

Other services

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Research Material] Global Market for Aluminum Die Casting Release Agents

Global Market for Aluminum Die Casting Release Agents: Water-Based, Solvent-Based, Automotive, Electrical & Electronics, Industrial Machinery, Others

This research report (Global Aluminum Die-casting Mold Release Agents Market) investigates and analyzes the current state and outlook for the global aluminum die-casting mold release agents market over the next five years. It includes information on the overview of the global aluminum die-casting mold release agents market, trends of major companies (sales, selling prices, market share), market size by segment, market size by major regions, and distribution channel analysis. The segments by type in the aluminum die-casting mold release agents market focus on water-based and solvent-based products, while the segments by application target automotive, electrical and electronic, industrial machinery, and others. The regional segments are categorized into North America, the United States, Europe, Asia-Pacific, Japan, China, India, South Korea, Southeast Asia, South America, the Middle East, and Africa to calculate the market size of aluminum die-casting mold release agents. It also includes the market share of major companies in aluminum die-casting mold release agents, product and business overviews, and sales performance.

Company：マーケットリサーチセンター
Price：Other

Other services

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

【Precision Molding Case】Successfully achieved continuous molding of shapes that are difficult with conventional release agents.

For cases where conventional release agents do not work well in molding precise surface shapes, please try Fluorosurf. There are numerous achievements in continuous molding.

"Fluoro Surf FG-5093" is a mold release agent made by dissolving a special fluororesin in a non-flammable fluorine-based solvent. By applying it, the adhesion of the surface molding resin is reduced, and a layer of fluorine compounds at the nanometer level exhibits excellent release properties even for complex and precise shapes. It demonstrates its effectiveness in cases where conventional release agents do not work well. It has excellent durability, with a proven track record of continuous release over thousands of shots, and reapplication with a brush or spray can restore its performance. Additionally, since the release agent does not adhere to the workpiece, cleaning after molding is unnecessary. Other examples are also included! *If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Coating Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Release Agent Example] Fluorine treatment on mold surface in-house (easy application + room temperature drying)

It is easy to perform release agent treatment that surpasses in-house baked fluororesin processing. Significant reduction in processing costs and delivery times!

"FloroSurf FG-5093" is a mold release agent made by dissolving a special fluororesin in a non-flammable fluorinated solvent. By applying it to the mold with a brush or spray and allowing it to dry at room temperature for about 10 minutes, the adhesion of the molding resin to the surface is reduced, demonstrating excellent release properties. It is particularly effective in situations where conventional release agents do not work well. The film is at the nanometer level, allowing for accurate reproduction even on complex and precise surface shapes. It has excellent durability, with a proven track record of continuous release for thousands of shots, and reapplication with a brush or spray can restore its performance. Since the release agent components do not adhere to the molded products, cleaning is unnecessary. 【Features】 ■ Strongly adheres in reaction to mold materials, enabling continuous release ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds ■ Can be easily applied with a brush or spray gun, eliminating the need for outsourcing processing ■ No need to remove the film during mold reworking ■ No transfer of release agent components, eliminating the need for cleaning of molded products ■ Low odor and non-flammable, maintaining a good working environment and easy management *If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Coating Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Fluorine-based release agent that can be applied on-site: Fluorosurf FG-5093

Please try this when regular release agents do not work well. It offers overwhelming continuous release properties. Easy to apply with a brush or spray. Dries at room temperature in 5 minutes after application.

The "Fluoro Surf FG-5093" is a mold release agent made by dissolving a special fluoropolymer in a non-flammable fluorinated solvent. Just one application provides a non-stick surface to the mold. It reduces the adhesion of the molded resin to the mold, demonstrating excellent continuous release properties even for complex and precise shapes. Please try it in cases where conventional release agents do not work well. It has excellent durability, with proven continuous release performance over thousands of shots, and reapplication using a brush or spray can restore its performance. 【Features】 ■ Strongly adheres to the mold material, allowing for continuous release ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds ■ Can be easily applied with a brush or spray gun, and dries at room temperature in 10 minutes, eliminating the need for external processing ■ No need to remove the film during reapplication ■ No transfer of release agent components, eliminating the need for cleaning of molded products ■ Low odor and non-flammable, maintaining a good working environment Applying it to the extrusion molding nozzle can also reduce surface defects. *If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Coating Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Fluorine Coating Agent Example] Easy to apply and improves mold release properties.

Dry fluorine-based mold release agent. Overwhelming continuous release performance. Please try it when conventional release agents do not work well. No cleaning of molded products required. Samples available.

The "Fluoro Surf FG-5093" is a mold release agent made by dissolving a special fluororesin in a non-flammable fluorine-based solvent. Additionally, it does not contain any PFAS regulated substances. With just one application, the adhesion of the surface molding resin is reduced, demonstrating excellent continuous release properties even for complex and precise shapes. It is particularly effective in situations where conventional release agents fail to work. It boasts outstanding durability, with a proven track record of continuous release over thousands of shots, and reapplication with a brush or spray can restore its performance. 【Features】 ■ Strongly adheres to mold materials, enabling continuous release ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds ■ Can be easily applied with a brush or spray gun, eliminating the need for outsourcing processing ■ No need to remove the film during mold reworking ■ No transfer of release agent components, eliminating the need for cleaning molded products ■ Low odor and non-flammable, maintaining a good working environment *If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Other molds

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Continuous release-type dry release agent for fine molding "Nanoimprint"

High release properties, compatible with nano-level surface shapes and nano-imprinting "FloroSurf" - Easy application with brushes or sprays.

Introducing the high-performance fluorine-based mold release agent "FloroSurf," which surpasses baked-on fluoropolymer coatings and silicone release agents. When conventional release agents fail to release ⇒ We solve the problem with outstanding release performance. When you want to improve continuous release properties ⇒ Continuous release properties will be enhanced. "FloroSurf" features nano-level release components that bond tightly to the mold surface ⇒ It provides strong release and lubricating properties to the mold surface. It demonstrates exceptional continuous release properties in the molding of precision complex shapes, highly adhesive resins, elastomers, and fragile thin-walled products. ~ We are offering free samples exclusively for businesses! ~ Please select "Request Sample" via the [Contact Button] below.

Company：フロロテクノロジー
Price：Other

Other molds

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Fluorine surface treatment of molds at our own site - Room temperature release agent - FluoroSurf

Fluorine-based dry release agent. Please try it when conventional release agents do not work well. Overwhelming continuous release properties. Easy to apply and dries at room temperature in 5 minutes. No need to clean the molded products.

The "Fluoro Surf FG-5093, 5095, 5097 Series" is a mold release agent made by dissolving a special fluororesin in a non-flammable fluorinated solvent. Just one application grants a non-stick property to the mold surface. It reduces the adhesion of molding resins to the mold, demonstrating excellent continuous release even for complex and precise shapes. Please try it in cases where conventional release agents do not work well. It boasts excellent durability and a proven track record of continuous release, and its performance can be restored by reapplying with a brush or spray. 【Features】 ■ Strongly adheres to mold materials, enabling continuous release ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds and nano imprinting ■ Easily applied with brushes or spray guns, with a drying time of 10 minutes at room temperature. No need for outsourcing processing ■ No need to remove the film during reapplication ■ No transfer of release agent components, eliminating the need for cleaning of molded products (FG-5093, 5095) ■ Low odor and non-flammable, maintaining a good working environment Applying it to the extrusion molding nozzle can also reduce haze. Free samples are available for trial (limited to corporations)! Feel free to request.

Company：フロロテクノロジー
Price：Other

Coating Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Dry high-performance release agent Fluorosurf silicone-free

A dry release film is formed on the surface of the mold. Release properties are significantly improved, and cleaning of the molded products is unnecessary. It is non-flammable and safe, and can be easily applied. Contains no silicone-based compounds.

"FloroSurf FG-5093" is a fluorine-based dry mold release agent. It is free of silicone, ensuring that it does not contaminate molded products, eliminating the need for cleaning. By applying it, the adhesion of the surface molding resin is reduced, demonstrating excellent release properties even for complex and precise shapes. It is particularly effective in situations where conventional release agents fail to work properly. It boasts exceptional durability, with proven performance for continuous release over thousands of shots, and reapplication using a brush or spray can restore its effectiveness. **Features** - Strongly adheres to mold materials, enabling continuous release. - The film thickness is only a few nanometers, suitable for nano and sub-micron level molds. - Easily applied with brushes or spray guns, eliminating the need for outsourcing processing. - No need to remove the film during mold modifications. - No transfer of release agent components, eliminating the need for cleaning molded products. - Low odor and non-flammable, maintaining a good working environment. *If you would like a free sample, please include "Sample Request" in your inquiry.*

Company：フロロテクノロジー
Price：Other

Coating Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Continuous release is possible. Fluorine surface processing of molds at our own site. Non-transfer.

Please try this when conventional release agents do not work well. It offers overwhelming continuous release properties. It is easy to apply, can be applied on the molding site, and only requires 5 minutes of air drying at room temperature. No cleaning of the molded products is necessary.

The "Fluoro Surf FG-5093, 5095, 5097 Series" is a mold release agent made by dissolving a special fluoropolymer in a non-flammable fluorinated solvent. Just one application provides a non-stick surface on the mold. It reduces the adhesion of molding resins to the mold, demonstrating excellent continuous release properties even for complex and precise shapes. Please try it in cases where conventional release agents do not work well. It has excellent durability and a proven track record of continuous release, and its performance can be restored by reapplying with a brush or spray. 【Features】 ■ Strongly adheres to the mold material, enabling continuous release ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds and nano-imprinting ■ Can be easily applied with brushes or spray guns, drying at room temperature in 10 minutes. No need for outsourcing processing ■ No need to remove the film during reapplication ■ No transfer of release agent components, eliminating the need for cleaning of molded products (FG-5093, 5095) ■ Low odor and non-flammable, maintaining a good working environment By applying it to the extrusion molding nozzle, it can also reduce haze. Free samples are available for trial (limited to corporations)! Please feel free to request.

Company：フロロテクノロジー
Price：Other

Coating Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Non-stick coating: Transparent non-stick coating can be easily applied at room temperature.

Power of fluorine strongly prevents adhesion of adhesives and dirt! The transparent thin film surface treatment can be easily applied at room temperature. Recoating on-site is also easy.

The simplified fluorine coating exhibits strong non-stick properties. By applying the coating, it becomes difficult for adhesives to adhere, and it also reduces dirt such as fingerprints, grease, and water stains. Furthermore, it can be easily removed. This can save you the hassle of daily maintenance. 【This is effective in the following cases】 ■ Preventing adhesive from sticking to metal knives and scissors ■ Ensuring that tape does not stick to the blade when cutting adhesive tape ■ Making it easier to remove scale from faucet fixtures ■ Wanting to easily remove fingerprints from touch panel surfaces ■ Improving the slip properties of touch panels to enhance the user experience ■ Aiming to reduce cleaning time for fingerprints and dirt ■ Needing a durable anti-fouling coating that does not change the appearance ■ Scale (white stains) adhering to metal surfaces and becoming difficult to remove ■ Fingerprints being noticeable on stainless steel control panels and inner doors ■ Improving the transmittance of films used on displays and preventing fingerprints ■ Enhancing slip properties during operation *If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Coating Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Release Agent Product List and Ranking from 41 Manufacturers, Suppliers and Companies

Release Agent Manufacturer, Suppliers and Company Rankings

Release Agent Product ranking