We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Resin.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Resin Product List and Ranking from 454 Manufacturers, Suppliers and Companies | IPROS GMS

Last Updated： Aggregation Period:May 27, 2026～Jun 23, 2026
This ranking is based on the number of page views on our site.

Resin Manufacturer, Suppliers and Company Rankings

Last Updated： Aggregation Period:May 27, 2026～Jun 23, 2026
This ranking is based on the number of page views on our site.

  1. 寺田 Tokyo//Electronic Components and Semiconductors
  2. ヤスハラケミカル Tokyo//Chemical
  3. MITSUBISHI GAS CHEMICAL NEXT COMPANY, INC. Tokyo//Resin/Plastic
  4. 4 MUROMACHI CHEMICALS INC. Chemicals Division Fukuoka//Chemical
  5. 5 OSAKA ORGANIC CHEMICAL IND., LTD. Osaka//Chemical
Go to Company Ranking

Resin Product ranking

Last Updated： Aggregation Period:May 27, 2026～Jun 23, 2026
This ranking is based on the number of page views on our site.

  1. Epoxy Resin Zero Mar Series for Sample Grinding [Made in Japan] アイエムティー
  2. Taiwan Elite Material Co. Ltd. (EMC) モリマーエスエスピー 本社
  3. Long-lasting, high-performance fluororesin (PTFE) packing <<Omni-Seal>> タフトレーディング
  4. 4 Joint Surface Treatment Agent "Hitlock B" イチネンケミカルズ
  5. 5 Liquid Bismaleimide Resin LMI-5000 OSAKA ORGANIC CHEMICAL IND., LTD.

Resin Product List

601～630 item / All 1394 items

Displayed results
Besper(R)

Besper(R)

Besper(R)

Bespel® is a high-heat-resistant plastic (fully aromatic polyimide resin) developed by DuPont. It has the best heat resistance and wear resistance among engineering plastics and is used in a wide range of applications, including mechanical and electrical components. 【Features】 1. Excellent heat resistance. It can be used continuously at 288°C and intermittently at 480°C. 2. Excellent wear resistance. The limit PV value is more than 10 times that of general plastics. 3. Excellent creep resistance. Creep at 260°C and 18.2MPa is only 0.6% after 1000 hours. 4. Excellent electrical properties. Insulation strength is 22KV/mm. 5. Additionally, it excels in plasma resistance, radiation resistance, gas release resistance (under vacuum), and chemical resistance.

  • others
  • Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Sludge collection container "Drain Cup"

Sludge collection container "Drain Cup"

Visually check the accumulated sludge to reduce unnecessary drainage.

We would like to introduce our drain cup. It is a standard option from FILSTAR, so it can be connected as is. By discharging the accumulated sludge that can be visually confirmed, excess moisture will be minimized. 【Parts】 ■ Standard option from FILSTAR ■ Can be connected as is ■ Accumulated sludge can be visually confirmed ■ Excess moisture is minimized *For more details, please refer to the PDF document or feel free to contact us.

  • Water treatment equipment
  • Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Thermosetting phenolic resin Selvic PP

Thermosetting phenolic resin Selvic PP

Thermosetting resin, paper phenolic resin

It excels in strength, processing accuracy, water resistance, and insulation compared to regular paper tubes.

  • Engineering Plastics
  • others
  • plastic
  • Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
A resin called "Psycho Wood" that combines the strength of ABS and the workability of engineered wood.

A resin called "Psycho Wood" that combines the strength of ABS and the workability of engineered wood.

A resin that combines the strength of ABS and the excellent machinability of artificial wood! It has high dimensional stability and is friendly to machines and tools, with shavings that do not turn to powder.

[Features] ■ Low burden on cutting tools and excellent machinability Thanks to its excellent cutting performance, it can be easily machined even with entry-level cutting machines. Its self-lubricating properties reduce wear. ■ Ideal for thin-walled and edge-shaped designs Compared to other composite woods, it possesses toughness and high impact strength, making it perfect for machining thin-walled shapes like ribs and fins, as well as shapes with sharp edges. ■ Does not produce dust, gentle on machines and the human body The chips produced during cutting do not turn into powder like other composite woods; instead, they become thin flakes, allowing for a favorable working environment that is gentle on both machines and the human body. Additionally, there are no unpleasant odors during cutting. * Psycho Wood is available in three types with different physical properties such as machinability and rigidity. For details, please request a catalog or view the PDF data by clicking the download button below.

  • plastic
  • Engineering Plastics
  • Composite Materials
  • Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Heat-resistant ceramic adhesive

Heat-resistant ceramic adhesive

Heat-resistant ceramic adhesive

【Features】 ● It is a smooth one-component paste, making it easy to apply to various metals, ceramics, graphite, and more. ● It exhibits excellent resistance to oxidative and reductive atmospheres, various solvents, molten metals, X-rays, and radiation. ● It is used in industries such as electronics, semiconductor manufacturing, aerospace, and automotive manufacturing for applications including adhesion, coating, thermocouple bonding, and heat-resistant surface formation.

  • glue
  • Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Thermoplastic resin for EMI shielding [Premier]

Thermoplastic resin for EMI shielding [Premier]

The pellets, which are embedded with special carbon fiber and have been homogenized, contain a special dispersant, allowing the carbon fibers to be evenly distributed within the molding die!

Premiere is a conductive plastic that imparts conductivity by dispersing nickel-plated graphite fibers within PC-ABS. The raw material for Premiere is in pellet form, with special carbon fibers (electrolytic nickel-plated on the surface) embedded in the center. These pellets are uniformly mixed with special dispersants, ensuring that the carbon fibers are evenly distributed within the molding die. While the shielding performance of typical aluminum or magnesium alloys is derived from their conductivity, Premiere exhibits significant absorption loss due to its permeability, enhancing attenuation characteristics across all frequency ranges. 【Advantages】 ■ Overall cost reduction through shortened processes such as plating ■ High conductivity and permeability ■ High thermal conductivity of 0.7 W/m-K ■ Lower specific gravity compared to aluminum, resulting in lightweight properties ■ Mechanical strength comparable to reinforced plastics *For more details, please download the PDF or feel free to contact us.

  • plastic
  • Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Light Shaping Example: "Automotive Car Lamp"

Light Shaping Example: "Automotive Car Lamp"

We will introduce examples of modeling using CMET's light curing technology and information useful for development sites!

Until now, the issue with light-curing resins was that when heat treatment was applied to improve heat resistance, the color of the model changed to a brownish hue, significantly worsening visibility. The transparent heat-resistant resin "TSR-884B" maintains its transparency even after heat treatment, ensuring that visibility is not compromised. The newly released TSR-884B addresses this issue, and as can be seen in photographs, the yellow index and total light transmittance show almost no change even after heat treatment. This also means that visibility is less likely to decrease during heat resistance testing. 【Applications】 - Design verification - Assembly verification of various parts, wiring verification - Lighting evaluation testing ● For more details, please download the catalog or contact us.

  • others
  • Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Light Shaping Example "Air Duct"

Light Shaping Example "Air Duct"

We will introduce examples of modeling using CMET's light curing technology and useful information for development sites!

There have been heat-resistant photopolymer resins that excel in heat resistance for some time, but they were all brownish or colored, with no transparent options available. However, the transparent heat-resistant resin "TSR-884B" possesses extremely high transparency while having heat resistance of over 100°C when subjected to heat treatment. By comparing it with the same shaped object below, you will be able to appreciate the high transparency of TSR-884B. With this, visual evaluation can be easily achieved without the need for meticulous polishing of the model. 【Applications】 - Design confirmation - Supporting and verifying CAE analysis results - Assembly confirmation ● For more details, please download the catalog or contact us.

  • others
  • Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Transparent, high heat-resistant resin "TSR-884B"

Transparent, high heat-resistant resin "TSR-884B"

This is a resin that has improved the functionality of the existing transparent resin series and significantly enhanced heat resistance.

Since the release of the transparent resin series, we have significantly improved the heat resistance temperature, which was highly demanded by users. Not only does the heat resistance exceed 100°C after heat treatment, but the yellowing of the resin during heat treatment has also been greatly reduced.

  • 3D Printer
  • Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Concrete joint surface treatment agent "Tritex CB-20"

Concrete joint surface treatment agent "Tritex CB-20"

Sanyo Life Material Co., Ltd. No need for wire brush treatment or high-pressure washing! Simplifying the process and enhancing cost-effectiveness.

This is a product handled by Sanyo Life Material Co., Ltd. For inquiries, please call 03-3518-8088. The "Blead Bond Method" involves spraying a special synthetic resin emulsion, "Tritec CB-20," onto the surface of freshly poured concrete and allowing it to be drawn into the concrete along with the bleeding water, thereby strengthening the surface layer of the concrete. The Tritec layer helps to prevent hairline cracks caused by drying shrinkage. By utilizing the absorption of bleeding water, laitance is removed, achieving adhesion at the joint surface that is equal to or better than other methods. 【Features】 - Utilizes the absorption of bleeding water to remove laitance - Achieves joint surface adhesion equal to or better than other methods - Prevents hairline cracks due to drying shrinkage with the Tritec layer - Eliminates the need for wire brush treatment or high-pressure washing, simplifying the process and enhancing cost-effectiveness *For more details, please refer to the PDF document or feel free to contact us.

  • Chemicals
  • Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Technical Data: Water-Compatible Xylene Resin AM-2000 (Development Product)

Technical Data: Water-Compatible Xylene Resin AM-2000 (Development Product)

Proposal for emulsifiers! Perfect for water-based paints and adhesives!

This document introduces the product "Water-based Compatible Xylene Resin AM-2000," which contains amphiphilic xylene resin with both hydrophilic and hydrophobic groups in its molecular structure. It includes examples of its excellent emulsification stability, which is exhibited when added as an emulsifier. We encourage you to read it. 【Contents】 ■ What is Water-based Compatible Xylene Resin AM-2000 ■ Features ■ Emulsification Stability of AM-2000 ■ Examples of Use as an Emulsifier for Epoxy Emulsions *For more details, please refer to the PDF document or feel free to contact us.

  • Other polymer materials
  • Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Silicone resin "Provil Putty"

Silicone resin "Provil Putty"

Accurately reproduce samples with complex shapes! A clay-type resin for transfer composed of a base material and a hardener.

"Provil Paste" is a silicone resin composed of a base material and a hardener. It is used by kneading it by hand in a 1:1 ratio. The kneaded resin can be transferred simply by pressing it against the sample with your hands. The resin hardens to a sufficient hardness for release after about 4.5 to 5 minutes. Due to the difference in hardness after curing, there are two types: regular and soft. The main application is for transfer intended for measurement in the mold and working equipment industry. 【Features】 ■ High-precision transfer performance (< 0.1 μm) ■ Suitable for surface transfer on etched surfaces (max. 500:1) ■ Accurately reproduces treated surfaces in three dimensions ■ Moderately deformable, allowing for accurate reproduction of complex-shaped samples ■ No work errors due to the automatic mixing system *For more details, please refer to the PDF document or feel free to contact us.

  • Resin processing machine
  • Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Transparent resin "Technovit 2000 LC"

Transparent resin "Technovit 2000 LC"

No bubbles and high transparency! Heat stress-free cold-cured epoxy resin!

"Technovit 2000 LC" is a transparent resin that can be cured at low temperatures simply by exposing it to blue light. It is filled into PE molds and cured within a Technotray light exposure device. By curing it in thin layers multiple times, it is possible to keep the reaction temperature below 50°C. After curing, when the temperature of the resin drops to around room temperature, it achieves an appropriate hardness for cutting and polishing. 【Features】 ■ Cures at low temperatures simply by exposing to blue light ■ Curing time: 20 minutes; curing temperature: below 90°C ■ No need to mix the resin ■ No bubbles and high transparency ■ Odorless *For more details, please refer to the PDF document or feel free to contact us.

  • Resin processing machine
  • Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Acrylic-based cold-curing resin "Technovit 4006"

Acrylic-based cold-curing resin "Technovit 4006"

Suitable for samples with a thin film or small samples! High transparency cold-curing acrylic resin.

"Technovit 4006" is a highly transparent, low thermal stress acrylic-based cold-curing resin. It cures with a two-component system of powder and liquid. It is suitable for samples that require a transparent embedding resin and for confirming samples embedded during sample preparation. Due to its high adhesion to samples, it is also suitable for samples with thin films or small samples. 【Features】 ■ Acrylic-based cold-curing resin ■ High transparency ■ Cures with a two-component system of powder and liquid ■ High adhesion to samples ■ Mixing ratio 2:1 (powder: liquid) *For more details, please refer to the PDF document or feel free to contact us.

  • Resin processing machine
  • Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Fast-curing resin "Technovit 4071"

Fast-curing resin "Technovit 4071"

Excellent fluidity, fits complex shapes! Cold-curing acrylic resin suitable for soft samples.

"Technovit 4071" is a fast-curing resin based on acrylic. It cures with two components: powder and liquid. It has excellent fluidity and is a resin with good workability that fits complex shapes and has a short curing time. It possesses excellent machinability and polishing properties, making it suitable for soft samples such as aluminum. 【Features】 - Fast-curing resin based on acrylic - Cures with two components: powder and liquid - Excellent fluidity - Fits complex shapes - Excellent machinability and polishing properties *For more details, please refer to the PDF document or feel free to contact us.

  • Resin processing machine
  • Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Surface transfer photopolymer resin "Technovit 2200 Series"

Surface transfer photopolymer resin "Technovit 2200 Series"

Curing is completed in about 20 to 60 seconds! After curing, it has excellent hardness, allowing for processing such as polishing and cutting!

The "Technovit 2200 Series" is a light-curing resin for surface transfer from Kulzer. When direct observation of the surface is not possible, transfer becomes one method to observe the surface condition. Kulzer's resin accurately transfers the surface of the sample, enabling high-precision observation. 【Features of the Technovit 2200 Series】 ■ Curing is completed in approximately 20 to 60 seconds ■ Almost no influence from temperature ■ Available in three types: 2200, 2210, and 2220, tailored for detailed applications ■ Can be cured with the dedicated lights Pekalux POWER LED and Technovit Blue LED ■ Excellent hardness after curing ■ Superior for processing such as polishing and grinding *For more details, please refer to the PDF document or feel free to contact us.

  • Plastic utensils and containers
  • Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
"Kurtsartecno Bit Series" Room Temperature Curing Resin Specification Comparison Table

"Kurtsartecno Bit Series" Room Temperature Curing Resin Specification Comparison Table

High transparency, quick curing time, easy workability, high precision transfer, stable performance!

This document presents the specifications of the Kulzer Technovit series (room temperature curing resin) in an easy-to-understand comparison table, covering applications, product composition, curing times, and more. Kulzer's Technovit is a high-quality resin product that combines high reliability with ease of use. Its range of applications is limitless, and it can be utilized in various fields. It is particularly well-regarded as an embedding resin for cross-sectional observation in quality assurance and product development. [Featured Products (Partial)] ■Technovit4000 ■Technovit4004 ■Technovit4006 ■Technovit4071 ■Technovit5000 *For more details, please refer to the PDF document or feel free to contact us.

  • Organic Natural Materials
  • Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Observation embedding resin "Technovit 4006 SE"

Observation embedding resin "Technovit 4006 SE"

For embedding extremely thin layers! It is possible to achieve high transparency resin embedding with minimal bubble formation.

"Technovit 4006 SE" is an embedding resin suitable for embedding extremely thin layers. It cures with two components: powder and liquid. Compared to Technovit 4006, it allows for a high degree of transparency in resin embedding with fewer bubbles, even without using the pressure device Technomat. 【Features】 ■ Ideal for embedding extremely thin layers ■ Cures with two components: powder and liquid ■ Resin color: transparent ■ Allows for a high degree of transparency in resin embedding with fewer bubbles *For more details, please refer to the PDF document or feel free to contact us.

  • Plastic utensils and containers
  • Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Polyester resin "2S"

Polyester resin "2S"

Ideal for polishing targeted areas! Used when you want to cure at room temperature, making it transparent, and need to fill quickly.

"2S" is a transparent polyester resin that cures quickly. Bubbles spontaneously escape even without a degasser, allowing for clean embedding. It generates heat up to around 80°C, but cures in an hour and a half at room temperature (20°C), making it the second fastest curing time after acrylic resin. It has higher transparency than acrylic, making it suitable for polishing targeted areas. [Features] - Cures transparently and quickly - Bubbles spontaneously escape without a degasser - Allows for clean embedding - Second fastest curing time after acrylic resin - Contains styrene in the hardener *For more details, please refer to the PDF document or feel free to contact us.

  • Other polymer materials
  • Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Conductive Phenolic Resin

Conductive Phenolic Resin

Introduction of conductive phenolic resin suitable for those who perform numerous SEM observations and electro-polishing in a day.

"Conductive Phenolic" is a thermosetting resin with conductivity. Since it has conductivity, you can embed it as is and observe it with SEM without any deposition. It is an ideal product for those who perform numerous SEM observations or electro-polishing in a day. 【Features】 ■ Equipped with conductivity ■ SEM observation possible without deposition ■ Made by PRESI *For more details, please refer to the PDF document or feel free to contact us.

  • Other polymer materials
  • Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Acrylic resin "KM-CO"

Acrylic resin "KM-CO"

The curing temperature is 70°C and the curing time is 30 minutes! It is suitable for SEM observation and electro-polishing use.

"KM-CO" is an acrylic resin that can be used with heat-resistant materials, mixing powder and liquid to cure. Since the main agent contains carbon, it is suitable for final observation purposes that require SEM observation or electro-polishing. There is no need for deposition, and it can be observed directly after polishing. Conductive resins are easily affected by the room temperature during mixing, so it is recommended to use the mixing ratio as a guideline to some extent. 【Features】 ■ Mixes powder and liquid to cure ■ Usable with heat-resistant materials ■ No deposition required ■ Can be observed directly after polishing ■ Manufactured by PRESI *For more details, please refer to the PDF document or feel free to contact us.

  • Other polymer materials
  • Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Silicone resin "Technovit Provil"

Silicone resin "Technovit Provil"

It deforms moderately, allowing for accurate reproduction of complex-shaped samples! Effective for a wide range of applications and tests.

"Technovit Provil" is a low-viscosity silicone resin suitable for taking impressions of complex shapes. It consists of a dispensing gun, cartridge, and mixing tube, and the resin is uniformly mixed simply by pulling the lever of the gun. The mixed resin can be directly applied to the sample. For application to small cavities or holes, precision work attachments are available. 【Features】 ■ High-precision transfer performance (< 0.1μm) - suitable for surface transfer such as etching (max. 500:1) ■ Accurately reproduces treated surfaces in three dimensions ■ Deforms moderately, allowing for accurate reproduction of complex-shaped samples ■ No work errors due to the automatic mixing system ■ Free from harmful substances ■ No heat generation during curing *For more details, please refer to the PDF document or feel free to contact us.

  • Other polymer materials
  • Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
<Embedding Resin> Epoxy Resin 'HERZOG EPO' [Free Sample]

<Embedding Resin> Epoxy Resin 'HERZOG EPO' [Free Sample]

Main agent of epoxy resin. It is a two-component resin that is mixed with an epoxy hardener to embed samples. It is the optimal resin for sample embedding.

We offer two types of epoxy resin. Free samples will be sent along with the hardener (non-toxic). Please contact us if you are interested. <HERZOG EPO> This is an epoxy base resin designed with optimal hardness, adhesion, transparency, and shrinkage for embedding and polishing samples. <HERZOG EPO Low Viscosity> This is a low viscosity type of epoxy base resin. It easily penetrates gaps in samples and is suitable for complex shapes. It also produces minimal bubbles. ☆You can also purchase it on Amazon. Please check the link below.

  • 1571.jpg
  • DSC_2971.JPG
  • bakyu.png
  • PC11-4.JPG
  • Repair Agent
  • Other consumables
  • Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Epoxy resin hardener-2

Epoxy resin hardener-2

This is an epoxy hardener that is not subject to the Poisonous and Deleterious Substances Control Law.

Epoxy resin is said to be the most suitable cold-cure resin for sample polishing due to its high hardness and low shrinkage rate among cold-cure resins at room temperature. This product eliminates hazardous substances such as ethylene triamine and triethylene tetraamine, yet it possesses performance characteristics such as hardness, curing time, and shrinkage that are comparable to conventional epoxy hardeners. **Benefits of Being Hazardous Substance-Free** - No need to handle materials from locked storage shelves for "pharmaceutical-grade hazardous substances." - Elimination of daily management and record-keeping for usage and remaining quantities. - No need for special leakage or theft prevention measures. - Removal of management duties for toxic substance handlers. - Reduction of safety and health concerns. By being hazardous substance-free, unnecessary tasks outside of practical work are eliminated, leading to increased productivity. Of course, it also contributes to safety and health. **Drawbacks of Being Hazardous Substance-Free** Since substances commonly used have been eliminated, there may be slight differences in user experience compared to the epoxy you have used before. Therefore, if you have concerns about usage, we can send you a free sample so you can try it out and verify for yourself. ★ It is also available for purchase on Amazon. Please check the link below.

  • 1552-2.JPG
  • bakyu.png
  • epo.png
  • Ceramics
  • Printed Circuit Board
  • aluminum
  • Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Free sample will be sent] Metal embedded resin 'Epoxy resin'

[Free sample will be sent] Metal embedded resin 'Epoxy resin'

It is a thermosetting epoxy resin. It is used for embedding samples. [Low price, short delivery time, high quality]

It is a thermosetting embedding resin. 【Features】 ◆ It is said to be the most suitable resin for sample embedding among thermoplastic resins. ◆ Available in powder and granule types. ◆ High adhesion. ◆ High hardness. ★ It can also be purchased on Amazon. Please check the link below.

  • 粉.png
  • 1598.JPG
  • ECOPRESS_52_102_202-08.png
  • 中間ラム　要背景処理.jpg
  • Repair Agent
  • Other consumables
  • Optical microscope
  • Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Free Sample Distribution] Metal Embedded Resin 'Diallyl Phthalate Resin'

[Free Sample Distribution] Metal Embedded Resin 'Diallyl Phthalate Resin'

It is a diallyl phthalate resin of thermosetting resin. It is used for embedding metals. [Low price, short delivery time, high quality]

It is a thermosetting embedding resin. 【Features】 ◆ Contains glass fibers to reduce edge sagging. ◆ Suitable for samples made of hard metal materials. ◆ It is green in color, making it easy to check the samples. ★ It is also available for purchase on Amazon. Please check the link below.

  • jiariru.png
  • 1721.JPG
  • Ecopress102.png
  • ECOPRESS_52_102_202-11.png
  • IMG_5854 copy.jpg
  • 面取りモールド　.jpg
  • Repair Agent
  • Other consumables
  • Optical microscope
  • Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
<New Product> Embedded Resin "Paper Zero 4" Environmental Protection Product [Free Samples Available]

<New Product> Embedded Resin "Paper Zero 4" Environmental Protection Product [Free Samples Available]

This is a new bio-resin for embedding samples. It is made from "paper" components and can be disposed of as combustible waste. There is no dust dispersion or distinctive odor.

Paper Zero 04 is primarily made from plant-based paper. It is a product that helps reduce CO2 emissions during manufacturing and disposal, contributing to measures against global warming. Additionally, it does not generate dust, odors, or toxic gases, allowing operators to handle it safely and providing a stress-free working environment. 【Features】 ◆ After shaping, it can be treated as paper waste and disposed of as combustible garbage. ◆ No dust is generated. ◆ There is no odor specific to resins. ◆ No toxic gases such as formaldehyde are emitted during embedding. ◆ It creates a safe workplace environment even in places where ventilation is not possible. ◆ It is crushable, allowing for the retrieval of embedded samples. ◆ It has good compatibility with epoxy resins and can also be used as a filler. ◆ Work efficiency will undoubtedly increase. ◆ It contributes to CO2 reduction. ☆ Free samples are currently being distributed. Please feel free to contact us!

  • p4S - コピー.png
  • IMG_1268 - コピー.jpg
  • Repair Agent
  • Other consumables
  • Electron microscope
  • Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Technical Data] High-Performance Resin DuPont(TM) Bepal(R) SP-1

[Technical Data] High-Performance Resin DuPont(TM) Bepal(R) SP-1

100% polyimide resin. It has excellent mechanical strength, heat resistance, and electrical and thermal insulation properties.

If the processing materials are in stock, same-day shipping is possible. The size chart is available on our website. Please take a look.

  • Engineering Plastics
  • Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High-performance resin DuPont™ Bexel® SP-22

High-performance resin DuPont™ Bexel® SP-22

Bearing platen vane for sliding parts!

If the processing materials are in stock, same-day shipping is possible.

  • Engineering Plastics
  • Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High-performance resin DuPont™ Bepel® SP-211

High-performance resin DuPont™ Bepel® SP-211

Thrust bearing, thrust washer, seal ring, for slide bearing!

If there is stock of the processing materials, same-day shipping is possible. (Except for the first order)

  • Engineering Plastics
  • Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Resin

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.