Resinのメーカーや取扱い企業、製品情報、参考価格、ランキングをまとめています。
イプロスは、 製造業 BtoB における情報を集めた国内最大級の技術データベースサイトです。

Resin - メーカー・企業453社の業務用製品ランキング | イプロスものづくり

更新日: 集計期間:May 27, 2026~Jun 23, 2026
※当サイトの各ページの閲覧回数を元に算出したランキングです。

Resinのメーカー・企業ランキング

更新日: 集計期間:May 27, 2026~Jun 23, 2026
※当サイトの各ページの閲覧回数を元に算出したランキングです。

  1. 寺田 Tokyo//Electronic Components and Semiconductors
  2. ヤスハラケミカル Tokyo//Chemical
  3. MITSUBISHI GAS CHEMICAL NEXT COMPANY, INC. Tokyo//Resin/Plastic
  4. 4 MUROMACHI CHEMICALS INC. Chemicals Division Fukuoka//Chemical
  5. 5 OSAKA ORGANIC CHEMICAL IND., LTD. Osaka//Chemical

Resinの製品ランキング

更新日: 集計期間:May 27, 2026~Jun 23, 2026
※当サイトの各ページの閲覧回数を元に算出したランキングです。

  1. Epoxy Resin Zero Mar Series for Sample Grinding [Made in Japan] アイエムティー
  2. Taiwan Elite Material Co. Ltd. (EMC) モリマーエスエスピー 本社
  3. Long-lasting, high-performance fluororesin (PTFE) packing <<Omni-Seal>> タフトレーディング
  4. 4 Joint Surface Treatment Agent "Hitlock B" イチネンケミカルズ
  5. 5 Liquid Bismaleimide Resin LMI-5000 OSAKA ORGANIC CHEMICAL IND., LTD.

Resinの製品一覧

1141~1170 件を表示 / 全 1399 件

表示件数

High heat-resistant epoxy resin EA-2596 <Sample available upon request>

By heating and curing at high temperatures, an epoxy resin is obtained that has high heat resistance and adhesive strength, resulting in a solid material.

By curing at a high temperature (150℃), you can obtain an epoxy resin that has high heat resistance (heat distortion temperature of 145℃). The heat resistance increases up to the temperature range at which it is cured. Additionally, curing with heat also improves adhesion. If you want to minimize curing shrinkage, please allow it to cure to some extent at room temperature before proceeding with heat curing. In a 25℃ environment, the usable time is over 1 hour, allowing for ample time to work. The high viscosity makes it less likely to drip, enabling application and buildup on vertical surfaces.

  • glue
  • Repair Agent
  • Coating Agent
  • Resin

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

"Guardian of Smoke: R.C. Umihara" in the tobacco smell of the smoking area.

★Samples available at Daikisan Industry★ Removes mold, viruses, and bacteria! Odor elimination power that doesn't just mask smells! Disinfectant, antibacterial, and anti-mold agent 'Guardian Deity'

**Features of the Guardian God** 1. Excellent sterilization, antiviral, antifungal, and deodorizing effects 2. Low likelihood of developing resistant bacteria 3. Extremely low corrosiveness to metals 4. No unpleasant chlorine smell, odorless 5. High safety recognized by public institutions; safer than salt or caffeine in terms of oral toxicity! One of the components of the Guardian God, chlorine dioxide in aqueous form "PUROGENE," is used as a sterilizing, antibacterial, deodorizing, and disinfecting agent for tap water, food processing facilities, machinery, and equipment, and is adopted as the final sanitizer for food hygiene management in the United States and various countries worldwide, receiving high praise. Furthermore, it is the only product recognized as a disinfectant for drinking water on aircraft globally. In Japan, it received approval from the Ministry of Health as a disinfectant for drinking water (chlorine dioxide) in 2000. Another component of the Guardian God, Mold Guardian, has a history of over 30 years and is a highly effective and safe antibacterial agent widely used in various fields of antibacterial and antifungal applications, including food factories. The Guardian God is a completely new disinfectant, antiviral, antibacterial, antifungal, and deodorizing agent with powerful dual power, specially formulated to maximize the synergistic effects of these two components. Free samples available! *If you would like a sample, please inquire with "Sample Request."

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Ion exchange resins "Muromac," "Levachit," "Duolite"

It is a resin that captures ions contained in water and exchanges them by releasing others in return.

Ion exchange resins "Muromac," "Lewatit," "DUOLITE" ○ Strongly acidic cation exchange resin ○ Weakly acidic cation exchange resin ○ Strongly basic anion exchange resin ○ Weakly basic anion exchange resin ○ Ion exchange resins for special applications (chelate resins) ○ Mixed bed resins ○ AMBERCHROME Finemesh We offer a wide range of ion exchange resins to meet various needs. For more details, please download the catalog.

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Ion exchange resin "AMBERCHROME Finemesh"

This is a group of products with different degrees of cross-linking for strong acid cation exchange resins. They are used for analysis and other purposes.

The ion exchange resin "AMBERCHROME Finemesh" is a product line of strong acid cation exchange resins with varying degrees of cross-linking (the percentage of divinylbenzene relative to styrene). There are three types with different particle size distributions: 2%, 4%, and 8%. They are used in a wide range of applications including analysis, separation, and purification. For more details, please download the catalog.

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Track Record of Ion Exchange Resin Adoption in Wastewater Treatment Applications

We provide solutions using technologies such as removal and separation with ion exchange resins for process wastewater, chemical wastewater, and more!

We propose the removal treatment of heavy metals and harmful ions in wastewater. We provide solutions using technologies such as removal and separation with ion exchange resins, concentration and separation with separation membranes, for applications including plating cleaning wastewater treatment, various cleaning wastewater, process wastewater, and chemical wastewater. [Applications] ■ Plating cleaning wastewater treatment ■ Various cleaning wastewater ■ Process wastewater ■ Chemical wastewater, etc. *For more details, please refer to the PDF materials or feel free to contact us.

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Track Record of Using Ion Exchange Resins in Pharmaceutical Purification

We are making proposals that leverage our strengths as a pharmaceutical manufacturing company!

At Muromachi Chemical Co., Ltd., we make proposals that leverage our strengths as a pharmaceutical manufacturing company, not only for pharmaceutical manufacturing water and process water but also for the purification of antibiotics, extraction and purification of culture substances, and purification of synthetic substances. We offer a wide range of ion exchange resins to meet diverse needs. It is important to select products that are suitable for the intended application, even among the same type of ion exchange resin. [Applications] ■ Pharmaceutical manufacturing water ■ Process water ■ Purification of antibiotics ■ Extraction and purification of culture substances ■ Purification of synthetic substances *For more details, please refer to the PDF document or feel free to contact us.

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Track Record of Ion Exchange Resin Adoption for Dehydration Applications

Expecting the removal effect of trace metals! We provide filter materials for solvent dehydration using ion exchange resins.

At Muromachi Chemical Co., Ltd., we offer ion exchange resin as a filtration material for solvent dehydration, serving as an alternative to molecular sieves and silica gel. Our ion exchange resins come in a wide range of products to meet diverse needs. We can recommend the most suitable ion exchange resin based on the types of ions contained in the liquid to be treated, the volume of liquid, and the processing speed. In addition to dehydration, you can also expect effective removal of trace metals. The filtration material can be reused multiple times through regeneration treatment. [Applications] ■ Alternative to molecular sieves and silica gel ■ Removal of trace metals as well as dehydration *For more details, please refer to the PDF document or feel free to contact us.

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Track Record of Using Ion Exchange Resins: Purification of Chemical Products

We propose the separation and purification of various liquids besides water.

In the electronics industry, high-purity chemicals are required. At Muromachi Chemical Co., Ltd., we can accommodate applications such as the removal of trace metals from organic solvents and the regeneration of catalyst solutions. Additionally, we offer separation and purification of various liquids beyond just water, including the purification of brine and chromium plating baths. [Applications] - Removal of trace metals from organic solvents - Regeneration of catalyst solutions, etc. *For more details, please refer to the PDF materials or feel free to contact us.

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

PFAS removal ion exchange resin for environmental surveys

Measures for water quality pollution control in PFAS analysis.

In the environmental survey industry, the detection of PFAS (per- and polyfluoroalkyl substances) in water quality analysis has become an important issue. PFAS, due to its persistence, causes environmental pollution and raises concerns about its impact on human health. Therefore, it is essential to accurately remove PFAS in water quality analysis to obtain reliable data. Our ion exchange resin for PFAS removal is effective in removing various organic fluorinated compounds, from long-chain to short-chain. 【Usage Scenarios】 - Water quality surveys of rivers, lakes, and groundwater - PFAS removal in wastewater treatment - PFAS analysis in drinking water 【Benefits of Implementation】 - Reduction of PFAS contamination risk - Improvement of data reliability in analysis - Compliance with environmental regulations

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Muromac HG Series for Semiconductors

High-purity ion exchange resin essential for semiconductor manufacturing processes.

In the semiconductor industry, the quality of ultra-pure water in the manufacturing process significantly affects product yield and performance. Particularly as miniaturization progresses, the contamination of trace impurities in the ppm and ppb range can lead to deterioration in product quality and reduced yield. The Muromac HG series is an ion exchange resin that enables the production of high-purity ultra-pure water to address these challenges. 【Application Scenarios】 * Production of ultra-pure water in semiconductor manufacturing processes * Purification of electronic materials and process liquids 【Benefits of Implementation】 * Improved product quality through the removal of ionic impurities in the ppm and ppb range * Enhanced yield * Realization of a stable manufacturing process

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

[Free Sample] Spherical Phenolic Resin 'LPS Series' with Particle Size Control

Free sample provision available! Controllable particle size! It is also possible to obtain spherical carbides from a high fixed carbon content!

The oldest resin, "phenolic resin," is now available in spherical form! Particle size control is possible in the range of 5μm to 500μm! Being spherical, it has excellent flowability! 【Features】 ○ Spherical shape provides good flowability and allows for high filling. ○ High fixed carbon content enables the production of spherical carbides through firing and heat treatment. ○ High purity with no ash content. ○ The molded products possess heat resistance, mechanical strength, chemical resistance, and electrical insulation comparable to conventional phenolic resins. For more details, please contact us or download the catalog.

  • Other polymer materials
  • plastic
  • Resin

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

New Mold Creation Method "SBM Process"

A new mold manufacturing method that eliminates irritating odors such as heat and ammonia, improving the work environment and productivity.

The "SBM Process" is a new molding method that improves the problems caused by traditional molding methods, such as heat and odors, on the environment. It also excels in collapsibility and reusability, making it possible to enhance productivity. 【Features】*Compared to the shell mold method ◆ Improved mold temperature from 250℃ to 120℃ ◆ No irritating odors such as ammonia ◆ The collapsibility of the mold is extremely good, and it excels in reusability 【For more details, please download the catalog or feel free to contact us】      ↓ ↓ ↓            ↓ ↓ ↓

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Enhance the flexibility and adhesion of rubber! Adhesive resin "Lignol."

"Rignol R-70/R-140" is a high-performance rosin-modified xylene resin that improves flexibility, tackiness, and weather resistance in rubber modification.

In rubber products, it is important to ensure durability while enhancing adhesion and flexibility. Rignite Corporation's rosin-modified xylene resin 'Lignol R-70/R-140' is an adhesive additive that demonstrates excellent effects in rubber modification applications. 【Features】 ■ Improved adhesion with high affinity for rubber ■ High formulation flexibility through softening point adjustment ■ Excellent heat and weather resistance, suitable for outdoor applications ■ Good moldability, contributing to improved processing efficiency 【Main Applications】 ■ Modifiers for styrene-based, butadiene-based, and isoprene-based rubber ■ Vibration-damping rubber, sealing materials, adhesive layer reinforcement applications The Lignol series supports the improvement of rubber product quality with high transparency and stable performance. For more details, please check the "Download Catalog" below.

  • Other polymer materials
  • Resin

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Thermoplastic polyimide resin Therplim powder filler application for toughness modifier in CFRP.

Improved toughness, enhanced sliding properties, and low dielectric effects from various powder additives! Introduction to powder filler applications.

Introducing the powder filler application of Therplim (filler). The effects of adding powder include improved heat resistance, enhanced mechanical properties, and improved sliding properties. For example, it provides toughness and reduces weight for high heat-resistant CFRP. 【Effects of Adding Powder】 ■ Improved heat resistance ■ Increased toughness ■ Enhanced mechanical properties ■ Improved sliding properties ■ Increased chemical resistance ■ Low dielectric * For more details, please refer to the PDF document or feel free to contact us.

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Matrix resin for "Therplim" CFRP.

Due to its high heat resistance and good moldability, it is most suitable for CFRP matrix resin.

Introducing examples of molding processing for CFRP (carbon fiber reinforced polymer) matrix resin as Therplim. Molded into UD tapes, prepregs, and films, rather than super engineering plastics like PEEK and PEKK. A new material that can replace metals with high strength and high heat resistance. Applicable to sensor components in automobiles, industrial machinery, and more. [Features] ■ Excellent moldability (secondary processing capability) ■ High heat resistance (up to 150℃), long-term heat resistance (up to 200℃) ■ High strength, flame retardant ■ Good appearance after crystallization ■ Low dielectric, high electromagnetic field shielding ⇒ Antenna, radar components * For more details, please refer to the PDF document or feel free to contact us.

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

『Therplim』 Wear resistance grade

Therplim「TS2400W」achieves higher strength, lower wear than PEEK!

The therplim TS series is a wear resistance grade for injection molding. The reinforced grades "TS2400W" that combine carbon fiber and whiskers have higher strength and elastic modulus than PEEK. ※For details, please see the PDF document or feel free to contact us.

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

[Column] Episode 3 Part 1 - Manual Embedding Machine Breaks - From 25 Minutes to 8 Minutes -

~Me, Kenma, and IMT~

One day, the heater temperature of the manual embedding machine wouldn't rise... it was broken... "I want to express my gratitude to the senior machine that was delivered before I was born. Thank you for your service." When I reported this to my boss... I was told to contact maintenance. "Really? Are we still making the senior work... please let it go!" I thought I could contact the guy from IMT... what a disappointment... Maintenance: "Unfortunately, we don't have the parts, so it's impossible." "I did it!" I made a small fist pump! My colleagues saw me and I turned red (laughs). I immediately called the guy from IMT. Actually, I had my eye on an automatic embedding machine for a while. It's called 'AgoraX.' Until now, embedding took about 25 minutes, but it solidifies in 8 minutes and comes out cool, reducing the risk of burns. Things were progressing smoothly with 'AgoraX,' but a competitor from overseas has emerged...

  • Wafer processing/polishing equipment
  • Resin

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Water-based urethane coating resin without solvents

It is a water-based urethane coating resin that does not contain solvents, ensuring environmental consideration and safety for workers.

Until now, many water-based urethane coating resins contained solvents, but the newly developed water-based urethane coating resin has successfully eliminated solvents. It is environmentally friendly and safe for workers, providing a reassuring and safe water-based urethane resin. The resin film is very soft.

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Ion exchange resin "mixed bed resin"

We will prepare products that are cleaned and mixed according to the application, such as cartridge pure water filters.

We offer cleaning and mixed products of strong acid cation exchange resin type H and strong base anion exchange resin (types 1 and 2) OH type according to your application. Depending on the target values set, we can provide consultation on the selection of ion exchange resins, mixing ratios, cleaning methods, and more.

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Injection Molding and Mass Production of PS (Polystyrene) Resin

More than 40 types of compatible resins! With PS (polystyrene) injection molding, we can produce even complex shapes! We deliver products with stable quality.

PS (polystyrene) is a material classified as a thermoplastic resin and is also known as styrol resin. It is characterized by its high transparency, excellent water resistance, and moldability; however, it has the drawback of being rigid yet prone to breaking under impact. It is suitable for inexpensive, high-volume consumer goods and is used in items such as food trays. 【Resins with molding achievements】 - PSJ Polystyrene VS741 Hoshino Seisakusho has a proven track record in molding over 40 types of resins. By being able to accommodate many types of resins, we can meet various requests from your company. *For more details, please refer to the catalog or feel free to contact us.

  • Processing Contract
  • Resin

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Impregnating sealant "Resinol 90C"

Leave it to us for gaps of 10μm to 100μm. We seal voids and cavities in powder metallurgy and die casting!

"Resinol 90C" is a sealing agent suitable for filling voids in powder metallurgy and pits in castings and die castings. Due to these voids and pits, powder metallurgy and die casting cannot undergo surface treatment and cannot be used for pressure applications, leading to usage restrictions. By using our impregnation sealing agent, "Resinol 90C," these issues will be resolved. 【Basic Properties】 ■ Material Acrylic resin ■ Heat Resistance -40℃ to 150℃ 【Target Materials】 ■ Powder metallurgy ■ Castings ■ Die castings ■ MIM ■ Pressed powders

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Impregnation sealant "PMS-50E"

Imparting waterproof and sealing properties to plastic molded products and sensor components. A sealing method different from potting and O-rings!

The "PMS-50E" is a sealant suitable for filling gaps in plastic molded products and gaps in products where sensors are molded with resin. Even if there are no gaps during molding, gaps can occur due to thermal shock during use, which can lead to larger gaps. It is also possible to suppress the occurrence and growth of such gaps. Additionally, "PMS-50E" has high chemical resistance, making it highly reliable even around engines and in oil. "PMS-50E" can also be applied to metal parts such as powder metallurgy and cast die-cast. In this case, it demonstrates superior performance in heat resistance, sealing properties, and chemical resistance compared to other impregnants we offer. 【Basic Physical Properties】 ■ Material Acrylic resin ■ Heat Resistance -40℃ to 204℃ 【Target Materials】 ■ Super engineering plastics such as PPS and PEEK ■ Engineering plastics such as PA6, PA66, POM, and PBT ■ Powder metallurgy ■ Castings ■ Die-cast ■ MIM ■ Pressed powders

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Impregnating sealant "5100"

Seal the gaps inside the electric wires and wire harnesses. A new sealing method to replace O-rings and potting.

"5100" is a sealant suitable for sealing gaps inside electric wires, wire harnesses, and similar applications. It maintains flexibility even after curing, making it suitable for sealing gaps in molded parts of connectors and sensors. Have you ever experienced oil or humid air leaking through gaps inside a wire harness? Or have you encountered situations where the insulation was damaged during use, allowing water to enter? In such scenarios, our impregnating liquid "5100" demonstrates high reliability. Additionally, "5100" retains high flexibility even after curing. Due to the differences in thermal expansion coefficients between resin and metal molded products, gaps can significantly shift when subjected to thermal shock. Even in such cases, "5100" moves with the shifting gaps, helping to minimize their occurrence. 【Basic Properties】 ■Material Acrylic resin ■Heat Resistance -40℃ to 150℃ 【Target Materials】 ■Fluoropolymer wires ■Cross-linked polyethylene wires ■Super engineering plastics such as PPS and PEEK ■Engineering plastics such as PA6, PA66, POM, and PBT

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Basic Knowledge of Plastics: Advantages and Disadvantages of ABS

A material with excellent mechanical properties and impact resistance, featuring a well-balanced set of physical properties! Detailed introduction of its advantages and more.

We will introduce the advantages and disadvantages of "ABS" as basic knowledge of plastics. It is a material with a balanced physical property profile, allowing for repeated use as a recycled material. Additionally, it has good fluidity and is easy to mold into various shapes. On the downside, it is susceptible to organic solvents, and in injection molding, weld lines are likely to occur. [Advantages] ■ Excellent mechanical properties and impact resistance among general-purpose plastics ■ Easy to paint or chrome plate, making it suitable for exterior parts ■ Good fluidity, making it easy to mold into various shapes ■ Low molding shrinkage rate, providing excellent dimensional stability during molding ■ Due to its ease of molding, there are many grades available that enhance strength and heat resistance ■ Can be reused repeatedly as a recycled material *For more details, please refer to the PDF document or feel free to contact us.

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

What is diallyl phthalate resin?

Materials that can be molded at relatively low pressure! Dimensional stability is not compromised even in high-temperature environments or high humidity!

"Diallyl Phthalate Resin" is a resin that is cross-linked and cured with styrene and vinyl acetate from diallyl esters of phthalic anhydride and allyl alcohol. The specific gravity ranges from 1.55 to 1.68 (with glass). It has excellent electrical properties. It maintains dimensional stability even in high-temperature environments and high humidity, and its electrical insulation properties are also stable. 【Features】 ■ Specific gravity: 1.55 to 1.68 (with glass) ■ Excellent electrical properties ■ Dimensional stability is not compromised even in high-temperature environments and high humidity ■ Electrical insulation properties are also stable ■ A material that can be molded at relatively low pressure *For more details, please refer to the PDF document or feel free to contact us.

  • Other polymer materials
  • Resin

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

What is silicone resin?

Excellent non-conductors with oil resistance, oxidation resistance, and heat resistance! Ranging from rubber-like materials to hard resins!

"Silicone resin" is a type of resin created by introducing organic groups such as methyl groups and benzene rings into the silicon framework that makes up glass. It comes in a wide range from rubber-like materials to hard resins, is colorless and odorless, and has water-repellent properties. It is an excellent insulator with outstanding oil resistance, oxidation resistance, and heat resistance, with a heat resistance temperature exceeding 200°C. [Features] - Wide range from rubber-like materials to hard resins - Colorless and odorless, with water-repellent properties - Excellent insulator with outstanding oil resistance, oxidation resistance, and heat resistance - Heat resistance temperature exceeds 200°C (potentially up to 400°C depending on conditions) *For more details, please refer to the PDF document or feel free to contact us.

  • Other polymer materials
  • Resin

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

What is phenolic resin?

Two types: "Novolak type" and "Resole type"! The reaction progresses and hardens by heating!

"Phenolic resin" is a type of resin that is mainly classified into two categories. The "Novolac type" is reacted with an acidic catalyst, and it is not reactive on its own. The reaction progresses when heated together with a hardener, leading to three-dimensional cross-linking and curing. On the other hand, the "Resole type" is reacted with an alkaline catalyst, and the reaction progresses upon heating, resulting in curing similar to Novolac. 【Features】 ■ Novolac type - Reacted with an acidic catalyst - The reaction progresses when heated with a hardener, leading to three-dimensional cross-linking and curing ■ Resole type - Reacted with an alkaline catalyst - The reaction progresses upon heating, leading to curing *For more details, please refer to the PDF document or feel free to contact us.

  • Other polymer materials
  • Resin

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

What is polyurethane resin?

Mainly used for resins in paints and inks! Excellent abrasion resistance, impact resistance, and oil resistance!

"Polyurethane resin" is excellent in flexibility and elasticity, has good low-temperature properties, and is superior in abrasion resistance, impact resistance, and oil resistance. It is mainly used for resins in paints and inks. Additionally, it is used in various applications such as urethane foam for packaging and cushioning materials, thermal insulation, synthetic leather, textiles, and clothing. [Features] - Excellent flexibility and elasticity, with good low-temperature properties - Superior abrasion resistance, impact resistance, and oil resistance - Weakness: Not excellent in heat resistance and prone to resin degradation under high temperature and humidity *For more details, please refer to the PDF document or feel free to contact us.

  • Other polymer materials
  • Resin

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Injection molding of high-performance resins such as PEEK, recycled resins, and biodegradable resins on a tabletop.

Wide-ranging injection molding of resins, including thick-walled molding of PEEK, is possible.

We accommodate a variety of thermoplastic resins, including general-purpose resins, high-performance resins, eco-plastics, and special resins such as CIM, CFRTP, and GFRTP. We lower the barriers for prototyping and accelerate research and development. Additionally, we enable the recycling and utilization of plastic waste, contributing to resource circulation. For more details about the resins we offer, please refer to our catalog and website. Related link - https://www.centinno.co.jp/

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Materials for hollow fiber membranes: PSU, PPSU, PES

As a material for hollow fiber membranes.

PSU (Polysulfone) High heat resistance Excellent dimensional stability Moderate resistance to acids and bases Excellent moldability Balanced control of oxygen and moisture permeability PES (Polyether sulfone) High heat resistance Chemical resistance to acids, alkalis, and oxidizing agents High mechanical strength and rigidity Excellent film-forming ability and solvent resistance PSU (Polyphenylsulfone) High heat resistance Chemical resistance to acids, alkalis, and oxidizing agents Outstanding hydrolysis resistance and impact resistance Repeatedly suitable for steam sterilization and autoclaving

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録