Last Updated： Aggregation Period:Jan 07, 2026～Feb 03, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jan 07, 2026～Feb 03, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jan 07, 2026～Feb 03, 2026
This ranking is based on the number of page views on our site.
16～30 item / All 225 items
UDinfo, CFX-21UF series, operating temperature 0 to 70°C, PCIe Gen 1/2/3
Features ■Read/Write Speed (Maximum) R: 1,600MB/s; W: 1,000MB/s ■32GB to 512GB ■Supports NVMe high-speed protocol ■PCIe Gen 1/2/3 ■Uses Toshiba BiCS3 TLC ■Equipped with SMART functionality
UDinfo, MHD-52UN series, extended temperature range -40 to 85°C, mSATA I/II/III (1.5/3/6Gbps)
Features ■Read/Write Speed (Maximum) R: 520MB/s; W: 195MB/s ■1GB to 64GB (SLC), 2GB to 128GB (pSLC), 4GB to 256GB (MLC) ■Achieves larger capacity and lower cost than SLC through pSLC technology ■Control via hardware or software GPIO ■Power Loss Protection (PLP) function enables recovery during power outages ■After quick erase, the SSD can return to its original state using MP tools ■Equipped with SMART functionality *Power-Loss Protection (PLP) is a scheme designed to prevent data loss during sudden power outages while the SSD drive is being programmed or written. It can handle unexpected power failures or system crashes.
UDinfo, CF Express PCIe industrial SSD (3D TLC), extended temperature -40 to 85°C, supports up to 1TB.
Features ■Supports SATA Revision 3.2, SATA Gen3/Gen2/Gen1 ■Available in capacities up to 1TB (3D TLC: 64GB to 1TB, 3D pSLC: 32GB to 128GB) ■Achieves high performance with up to 550MB/s read and 500MB/s write based on 3D TLC NAND flash ■Dimensions: 36.4(L) x 42.8(W) x 3.3(H) ■S.M.A.R.T (Self-Monitoring, Analysis, and Reporting Technology) ■Conformal coating (insulation protection coating) ■Optional DEVSLP (Device Sleep) feature available
mSATA industrial SSD (3D TLC/3D pSLC), extended temperature -40 to 85°C, supports up to 2TB.
Features ■ SATA Revision 3.2, SATA Gen3/Gen2/Gen1 interface ■ Available in capacities up to 2TB (3D TLC: 64GB to 2TB, 3D pSLC: 32GB to 256GB) ■ Based on 3D TLC NAND flash, achieving high performance with up to 550MB/s read and 510MB/s write speeds ■ Dimensions: 50.8(L) x 29.85(W) x 4(H)mm ■ S.M.A.R.T (Self-Monitoring, Analysis, and Reporting Technology) ■ Conformal coating (insulation protective coating)
Smith RSATA connector, 10 years of data retention, extended temperature support, up to 1920GB, SSD for military and aerospace markets.
Features ■ 2.5" form factor, Smith R-SATA connector ■ Maximum capacity 1920GB (R-SLC) ■ Read speed up to 530MB/s, write speed up to 520MB/s ■ Extended temperature support, operating temperature -40 to +85℃ ■ Data retention: 10 years at 25°C, compliant with JESD47 ■ Lifetime endurance: 30 drives per day (DWPD), 5 years ■ Advanced flash management - Built-in ECC - Static and dynamic wear leveling - Bad block management - SMART and TRIM commands - Enhanced power interruption data protection - Unrecoverable Bit Error Rate (UBER) - firmware upgrade ■ Data security - AES 256-bit encryption - End-to-end data path protection (local CRC) - Secure erase (HW & CRC)
RENICE, X10 Series U.2 NVMe R-SLC Industrial SSD
【RENICE X10 2.5" U.2 NVMe R-SLC SSD Features】 ■ 2.5-inch U.2 NVMe industrial SSD ■ Capacity R-SLC 960GB, 1.92TB ■ Read/Write Speed (Max) 2600 / 1900MBs ■ Supports SMART, TRIM, NCQ, AES 128bit/256bit ■ Power failure, overvoltage, overcurrent protection ■ Operating temperature -40 to 85℃ ■ Vibration resistance 20G (10-2000Hz), shock resistance 1,500G (0.5ms) / 50G (11ms)
RENICE, X10B Series M.2 2280 Industrial SSD
【RENICE X10B M.2 2280 SATA SSD (3D TLC) Features】 ■ M.2 2280 industrial SSD ■ Capacity 3D TLC (480GB to 7.68TB) ■ Read/Write speed (maximum) 550/535MB/s ■ Supports SMART, TRIM, NCQ, AES 128bit/256bit ■ Power failure, over-voltage, over-current protection ■ Operating temperature -40 to 85℃ ■ Vibration resistance 10G (10-2000Hz), shock resistance 50G (11ms) ■ MTBF 2,000,000 hours
RENICE, X10 Series SATA III R-SLC Industrial SSD
【RENICE X10 2.5" SATA III R-SLC SSD Features】 ■ 2.5-inch SATA III industrial SSD ■ Capacity R-SLC 960GB, 1.92TB ■ Read/Write Speed (Max) 530 / 520MBs ■ Supports SMART, TRIM, NCQ, AES 128bit/256bit ■ Power failure, over-voltage, over-current protection ■ Operating temperature -40 to 85℃ ■ Vibration resistance 16.4G (10-2000Hz), shock resistance 1,500G (0.5ms)/50G (11ms)
UDinfo, M.2 2280 PCIe industrial SSD NVMe PCIe Gen3x4, 3D TLC, maximum capacity 2TB
【UDinfo M2P-80DL Features】 ■ S.M.A.R.T (Self-Monitoring Analysis and Reporting Technology) ■ Conformal Coating (Insulation Protection Coating) ■ OPAL (Self-Encrypting Drive) ■ Write Protect ■ Supports the following hardware power failure protection (optional) Protects against data loss during write processing, even with the last data, when the power suddenly goes out. Additional polymer tantalum capacitors hold up for a few milliseconds to maintain the writing of DRAM data to NAND flash.
Do you know the differences in flash memory and how to choose it?
With the advancement of technology, the capacity and performance required for flash memory are also increasing. Importantly, flash memory is no longer just a component inside computers; it is being used as a crucial storage facility for holding portfolios related to customers' assets and operations. We have prepared a guidebook that explains the differences between consumer and industrial storage. By reading this guidebook, you will be able to make the best storage choices to protect your assets and intellectual know-how. Download the guidebook to get the latest information!
"32~256GB" MLC specification for long lifespan! Customized to meet customer needs.
【Main Features of the Product】 Industrial MLC Specification NVMe 2.5" SATA SSD SQF-S10 640 ■ Compliant with CFast Card Type 1 Standard ■ Interface: SATA Gen. 3 ■ Supports LDPC/ECC ■ Supports Universal Wear Leveling and Bad Block Management ■ Shock resistance, vibration resistance, low power consumption ■ GUI management tool, software API package
"32~256GB" MLC specification for long lifespan! Customized to meet customer needs.
【Main Features of the Product】 Industrial MLC Specification M.2 NVMe 2.5" SATA SSD SQF-S10 640 ■ NGFF M.2 2280 SSD (M key) ■ Compliant with PCIe Gen III x4 interface and NVMe 1.3 ■ Support for LDPC with RAID ECC ■ Supports TRIM and AHCI ■ GUI management tool & software API package
![[Catalog] Advantech's Industrial SSD and Memory Products](https://image.mono.ipros.com/public/product/image/b7b/2000684688/IPROS37336647923166736669.png?w=280&h=280)
"Achieving Rapid Application Development with the Latest Technology" A comprehensive introduction to Advantech's SQF/SQR products and SSD/Memory.
Advantech, as a provider of industrial flash and memory solutions, offers a comprehensive range of industrial SSDs and DRAM modules for developers in the industrial and semi-industrial sectors, ensuring long-term stable supply. All of our modules use Tier 1 dies, feature high durability performance, and comprehensive security functions, and are shipped after undergoing 100% screening tests. 【Table of Contents】 ■ SQF/SQR Storage & Memory ■ SQManager/Embedded Expansion Modules ■ Application Examples ■ Case Studies ■ Selection Guide
OEM-compatible mSATA 3 SSD (MO-300B)
This is an OEM-compatible MO-300B type SSD. It has the following features: * Adopts MO-300B (JEDEC) package dimensions (50.80mm x 29.85mm x 3.5mm) * OEM support (BOM Fixed, technical support, tool provision) * Capacities: 16GB, 32GB, 64GB, 128GB, 256GB (MLC type), 16GB, 32GB, 64GB (SLC type) * Interface: SATA-3 (6.0Gb/s), SATA-2 (3.0Gb/s) * High data integrity with EDC/ECC, long lifespan design with wear leveling * RoHS compliant, CE, FCC * Supports SMART commands * Sequential R/W: 480/236MB/s (max)
It is a 1.8-inch microSATA SSD (6Gbps).
This is a 1.8-inch microSATA SSD compatible with OEM. It has excellent environmental resistance. The use of a high-performance SATA3 SSD controller (SM2246EN) enables fast application loading.
