Spring Product List and Ranking from 94 Manufacturers, Suppliers and Companies

Torsion spring, phosphor bronze wire C5191W Φ0.3, contact spring.

We deliver in pallet packing to prevent entanglement.

The material used is "Phosphor Bronze Wire - C5191W". Phosphor bronze has high electrical conductivity and good plating and soldering properties, making it suitable for use in switches, connectors, and springs for electronic devices. It also has excellent corrosion resistance, particularly against corrosion from freshwater and seawater. To use phosphor bronze wire for springs, heat treatment is necessary. Low-temperature annealing after spring forming increases hardness and imparts springiness. (This is referred to as low-temperature annealing hardening.) These springs are formed using a multi-forming machine. During delivery, to prevent deformation due to entanglement between products, each one is separated into small portions on a pallet. If you have any issues with torsion springs, please feel free to consult us. Phone: 0235-22-0407 Technical Contact: Ujiie Tsurugaoka Spring Co., Ltd. for springs and springs Phone: 0235-22-0407 FAX: 0235-22-0546 Email: web@tohj.com We also support web conferencing.

Company：鶴岡発條
Price：Other

Spring
Spring

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Tension spring with a narrowed round hook

If it is a "squeezed round hook," you can design the body and the hook separately.

The hook shape that resembles a photograph is referred to as "tapered round hook" in JIS standards. It has a structure that incorporates a hook with a stop processing into the body of the spring, making it a hook shape that is strong against breakage and deformation. With a "tapered round hook," the body and hook can be designed separately. This allows for an increase in the strength of the hook without changing the spring's force adjustment (spring constant or load), making it an effective means when redesigning existing springs to be less prone to breakage. Many people seem to consider "broken springs as consumables," but by changing the specifications of the spring and the shape of the hook, the durability of the spring can be improved. Our company addresses issues such as spring breakage and deformation. If you send us broken samples, we will propose countermeasures and, if desired, we can also produce improved prototypes. Our technical staff will respond carefully, so please feel free to consult with us. Tsurugaoka Spring Co., Ltd. Technical Contact: Ujiie Phone: 0235-22-0407 FAX: 0235-22-0546 Email: web@tohj.com We also support web conferencing.

Company：鶴岡発條
Price：Other

Spring
Spring

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Twisted spring SWP-AΦ6.0 clutch return spring

To reduce the variation in moment, the initial tension is processed to be slightly weaker.

The material used is "Piano Wire Type A - SWP-A." To minimize the variation in moment (torque), the initial tension is processed as weakly as possible. Initial tension refers to the force that causes the wires to try to adhere to each other, and if this initial tension is too strong, it can affect the moment of the torsion coil spring. Conversely, in the case of tension springs, this initial tension is utilized to manage the load. If you have any issues with springs, please feel free to consult us. Our technical staff will respond carefully. Technical contact: Ujiie Phone: 0235-22-0407 FAX: 0235-22-0546 Email: web@tohj.com Tsuruga Hatsujo Co., Ltd. for springs We also support web meetings.

Company：鶴岡発條
Price：Other

Contract manufacturing
Spring

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Cone spring SWP-BΦ2.9 taper spring

One turn at both ends of a compression spring is called a "seat coil," and the terminology varies depending on the shape (closed end, open end, etc.).

The material used is "Piano Wire B Type - SWP-B." One coil at both ends of a compression spring is called a "seat coil." To ensure stability when the spring is upright, the tip of the "seat coil" is usually made to closely contact the adjacent coil. This shape is referred to as "closed end." If the tip of the "seat coil" is separated from the adjacent coil, it is called "open end," but this is not very common, and unless specifically instructed, it will be manufactured as a "closed end." The springs in the photo also have "closed ends" at both terminals. It is a bit difficult to see, but the seat coil at the front has a tapered shape that becomes smaller. The surface treatment is "electroless nickel plating." If you have any issues with springs, please feel free to consult us. Our technical staff will respond carefully. Technical Contact: Ujiie Phone: 0235-22-0407 FAX: 0235-22-0546 Email: web@tohj.com Tsuruga Spring Co., Ltd. for springs We also support web meetings.

Company：鶴岡発條
Price：Other

Contract manufacturing
Spring

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Tension Spring Special Hook SWP-A2.0

We can accommodate hooks with special shapes that are not specified in JIS standards.

The material is "Piano Wire Type A, SWP-A," and the wire thickness is Φ2.0. The hook shape of this spring is a special one not specified by JIS standards. It is narrowed inward once, and the hook is raised from the center of the body. Due to the difficulty of handling it with a multi-forming machine, the hook is shaped by hand. After shaping, heat treatment (low-temperature annealing) is applied to remove processing strain, and it is coated with zinc plating for rust prevention. If you have any issues with springs, please feel free to consult us. Our technical staff will respond carefully. Technical contact: Ujiie Phone: 0235-22-0407 FAX: 0235-22-0546 Email: web@tohj.com Tsuruga Spring Co., Ltd. for springs. We also support web meetings.

Company：鶴岡発條
Price：Other

Contract manufacturing
Spring

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Twisted spring SWP-AΦ1.2 return spring

We manufacture dedicated positioning jigs and other tools to maintain and manage dimensional accuracy.

The material used is "Piano Wire Type A - SWP-A." According to customer requests, the positional relationship between the larger and smaller coils is important. However, it was quite difficult to measure the dimensions accurately with calipers or height gauges. After discussions, we created a positioning jig using two pin gauges of different sizes. By assembling the springs one by one into the jig, we were able to measure and manage the dimensions. There are various requests from customers regarding the dimensions and shapes of the springs. In some cases, we manufacture dedicated jigs like this one to maintain and manage dimensional accuracy. If you have any issues with springs, please feel free to consult us. Our technical staff will respond carefully. Technical contact: Ujiie Phone: 0235-22-0407 FAX: 0235-22-0546 Email: web@tohj.com Tsuruga Spring Co., Ltd. for springs We also support web meetings.

Company：鶴岡発條
Price：Other

Contract manufacturing
Spring

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Tension Spring SWP-BΦ5.0 Left-Handed

It is a rare case where a "left-handed" spring is used in a tension spring.

The material used is "Piano Wire Type B, SWP-B," with a wire diameter of Φ5.0. The body part is wound using a heart gold type winding machine, while the hook part is shaped by hand. After heat treatment, an electroless nickel plating is applied as a rust prevention treatment. The winding direction of this spring is "left-handed." To determine the winding direction, if you stand the spring upright and look at it from the side, if the coil material is winding upwards to the right, it is right-handed; if it is winding upwards to the left, it is left-handed (according to JIS standards). For compression springs and tension springs, unless otherwise specified, they will be manufactured as right-handed. In particular, it is very rare for left-handed winding to be adopted for tension springs, and I would like to ask our customers someday why this spring is left-handed. Our company handles the manufacturing, design, and prototyping of tension springs. Please feel free to consult us if you have any concerns. Tsuruoka Spring Co., Ltd. Technical Contact: Ujiie Phone: 0235-22-0407 FAX: 0235-22-0546 Email: web@tohj.com We also support web conferencing.

Company：鶴岡発條
Price：Other

Contract manufacturing
Spring

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Compression spring SUS316-WPAΦ0.45 switch spring

SUS316-WPA is a highly corrosion-resistant material used for springs in locations exposed to seawater and in food factories.

The material used is "spring stainless steel wire - SUS316-WPA." Compared to the general-purpose SUS spring material "SUS304-WPB," it has higher corrosion resistance and is often used for springs in locations exposed to seawater, food factories, and pharmaceutical factories. Additionally, while "SUS304-WPB" is weakly magnetic, "SUS316-WPA" is almost non-magnetic. This spring is used in the switch part of a certain interior product. The mounting load in the assembled state and the maximum load when the button is pressed are measured and managed using a spring load testing machine. The shipping inspector checks each lot and attaches a material certificate (mill sheet) and inspection report before shipment. If you have any issues with springs, please feel free to consult us. Our technical staff will respond carefully. Tsurugaoka Spring Co., Ltd. Technical Contact: Ujiie Phone: 0235-22-0407 FAX: 0235-22-0546 Email: web@tohj.com We also support web conferencing.

Company：鶴岡発條
Price：Other

Spring
Spring

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Compression spring SWOSC-VΦ2.3 check spring

Shot peening and setting processes improve the durability of springs.

This is a spring for a check valve (non-return valve). The material used is "silicon-chromium steel oil-tempered wire for valve springs (SWOSC-V)." It is a ferrous material that excels in durability and heat resistance compared to "piano wire." After spring forming, "shot peening" and "setting" treatments are applied to enhance the durability of the spring. The surface treatment is "molybdenum disulfide and parylene treatment." Our company handles the manufacturing, design, and prototyping of springs. Please feel free to consult us if you have any concerns. Technical contact: Ujiie Phone: 0235-22-0407 FAX: 0235-22-0546 Email: web@tohj.com Tsuruga Spring Co., Ltd., based in Tsuruoka, specializes in springs. We also accommodate web meetings.

Company：鶴岡発條
Price：Other

Spring
Spring

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Snap spring piano wire SWP-AΦ0.5 flatness control

Since flatness is important, we manufacture dedicated jigs for inspection and management.

The material used is "Piano Wire Type A, SWP-A." This spring is processed by a multi-forming machine, involving winding and bending. Since the flatness of the product is important (to avoid rattling when placed on a flat surface), we use dedicated jigs for inspection and management. After forming the spring, heat treatment (bluing) is performed, and blackening treatment is applied for rust prevention. We also have experience with similar springs made from "stainless steel wire for springs" and "bronze wire." If you have any issues with springs or forming, please feel free to consult us. Our technical staff will respond carefully. Tsurugaoka Spring Co., Ltd. Technical Contact: Ujie Phone: 0235-22-0407 FAX: 0235-22-0546 Email: web@tohj.com We also support web meetings.

Company：鶴岡発條
Price：Other

Contract manufacturing
Spring

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Compression spring SUS304-WPB Φ0.35 spring index

The "spring index," also known as D/d (debaide), is a value that serves as a guideline for the difficulty of processing.

The material used is "spring stainless steel wire SUS304-WPB." The wire with a diameter of Φ0.35 is wound into a coil with an average diameter of Φ11mm. The spring index is approximately 31, indicating that it is a spring with a high difficulty level for coiling processing. The spring index is the value obtained by dividing the average coil diameter by the wire diameter, serving as a guideline for the difficulty of processing the spring. It is also referred to as the spring index = D/d (Devi-D). According to JIS standards, a spring index between 4 and 22 is desirable. If the spring index is 4 or lower, the coil diameter is small and tight, making it difficult to wind; if the spring index exceeds 22, the coil diameter is large and fluffy, making it difficult to wind, which gives you that impression. This spring has a spring index exceeding 22, at 31, but how does it look? It seems to be wound quite neatly. If you have any issues with springs, please feel free to consult us. Our technical staff will respond carefully. Technical contact: Ujiie Phone: 0235-22-0407 FAX: 0235-22-0546 Email: web@tohj.com Tsuruga Spring Co., Ltd. for springs. We also support web conferences.

Company：鶴岡発條
Price：Other

Spring
Spring

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Compression spring, phosphor bronze wire C5191W Φ0.26, return spring.

Control the free length with a sensor to minimize variations in installation to maximum load.

This is a spring used for controlling the movable iron piece of an electromagnetic valve. To accurately manage the installation to maximum load, a sensor called a length measuring device is used. The length measuring device automatically measures and adjusts the free length of the spring during the coiling process. Since the variation in the spring's load is almost proportional to the variation in free length, control using this length measuring device is effective. The material used is "phosphor bronze wire, C5191W." After spring forming, the spring's properties are enhanced through heat treatment. Similar springs have been successfully made from "piano wire, SWP-A, SWP-B" and "stainless steel wire for springs, SUS304-WPB, SUS316-WPA." If you have any issues with springs, please feel free to consult us. Our technical staff will respond carefully. Technical contact: Ujiie Phone: 0235-22-0407 Tsuruoka Spring Co., Ltd. Phone: 0235-22-0407 FAX: 0235-22-0546 Email: web@tohj.com

Company：鶴岡発條
Price：Other

Spring
Spring

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Tension Spring SWP-AΦ2.3 Clutch Spring

The tool is smoothly wrapped and processed to prevent scratches and scuff marks.

The material used is "Piano Wire Type A, SWP-A," with a wire diameter of Φ2.3. The shape of the hooks at both ends is "semi-round hooks." The hooks are formed using a multi-forming machine, which includes the hook processing. Since tension springs have the characteristic of concentrating stress (load) at the hook part, the processing tools are smoothly wrapped to prevent scratches and marks. After spring forming, heat treatment (low-temperature annealing) is applied to remove processing strain. The surface treatment is "trivalent chromate + baking." Springs of the same shape have also been successfully made from spring stainless steel wire, SUS304-WPB, SUS316-WPA, and Herculite. Our company handles the manufacturing, design, and prototyping of tension springs. Please feel free to consult us if you have any concerns. Technical contact: Ujiie Phone: 0235-22-0407 FAX: 0235-22-0546 Email: web@tohj.com Tsuruga Spring Co., Ltd. for springs and springs We also support web meetings.

Company：鶴岡発條
Price：Other

Spring
Spring

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Compression spring valve spring SWOSC-VΦ4.2

There are "spring type" and "valve spring type" in the iron-based spring material "oil-tempered wire."

The material used is "Silicon Chrome Steel Oil Tempered Wire for Valve Springs (SWOSC-V)." The wire thickness is Φ4.2. There are two types of oil-tempered wire for iron-based spring materials: "spring use" and "valve spring use." While the base material for "spring use" is hard steel wire, "valve spring use" employs piano wire as the base material, with strict quality standards established due to impurities in the steel and surface conditions. Thus, "valve spring use" is considered a higher-grade material. "SWOSC-V" is the most durable material among spring materials conforming to JIS standards. It is chosen when the durability of the iron-based spring material "piano wire" does not meet requirements. However, it is a material that is easily affected by hydrogen embrittlement, so plating treatment is not allowed. Therefore, the valve spring in the photo has been treated with electrodeposition coating as a rust prevention measure. If you have any concerns regarding springs, please feel free to consult us. Our technical staff will respond carefully. Tsurugaoka Spring Co., Ltd. for springs Technical Contact: Ujiie Phone: 0235-22-0407 FAX: 0235-22-0546 Email: web@tohj.com We also support web meetings.

Company：鶴岡発條
Price：Other

Spring
Spring

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Compression spring SUS304-WPBΦ1.2 pump spring

It is a specification for press-fitting a fixing shaft into the seat roll section.

Material: Spring stainless steel wire - SUS304-WPB Wire diameter: Φ1.2 The ends of a compression spring are called "seat coils." Typically, seat coils consist of one turn each, with the ends attached to the adjacent coils. (This is referred to as a closed end.) This spring has three turns of seat coil on one side only. To press-fit a fixing shaft into this seat coil section, the inner diameter tolerance of the seat coil section is managed at +0.2, -0. The opposite side (the front side) has a standard one-turn seat coil. If you have any issues with springs, please feel free to consult us. Our technical staff will respond carefully. Tsuruoka Spring Co., Ltd. Technical Contact: Ujiie Phone: 0235-22-0407 FAX: 0235-22-0546 Email: web@tohj.com We also support web meetings.

Company：鶴岡発條
Price：Other

Spring
Spring

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Twisted spring SWP-BΦ2.6 hinge spring

We manage the opposing angle of the arm with a dedicated inspection jig.

Material: Piano wire type B, SWP-B Wire diameter: Φ2.6 Formed using a multi-forming machine. Since the opposing angle of the left and right arms is important, we have created a dedicated inspection jig to manage the angle. If you have any issues with springs, please feel free to contact us. Turuoka Spring Co., Ltd. Contact: Ujiie Phone: 0235-22-0407 Fax: 0235-22-0546 Email: web@tohj.com

Company：鶴岡発條
Price：Other

Spring
Spring

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Compression spring bolt screwing spring fixation

The spring is used by screwing it into an M10 bolt.

Material: Piano wire type A, SWP-A Wire diameter: Φ1.5 The terminal on the right side of the spring is a tightly wound 5-turn coil. The inner diameter is managed to allow for smooth screwing of an M10 bolt. The method of screwing a bolt into a tightly wound coil is sometimes used for fixing springs. By changing the wire diameter and coil inner diameter, the feel when screwing (such as smoothly like assembling a nut, or a bit tighter while applying some resistance) can be freely controlled. We will create a prototype based on your request for your evaluation. The terminal on the left side is an open-end with a pitched coil. Our company handles the manufacturing, design, and prototyping of springs. Our technical staff will respond carefully, so please feel free to consult us if you have any concerns. Tsurugaoka Spring Co., Ltd. Contact: Ujiie Phone: 0235-22-0407 FAX: 0235-22-0546 Email: web@tohj.com

Company：鶴岡発條
Price：Other

Spring
Spring

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Tension spring with special hook

We also accommodate hook shapes that are outside of JIS standards.

Material: Piano wire type A, SWP-A Wire diameter: Φ3.5, right hook only Φ5.0 Both hooks are shapes not specified by JIS standards. The left hook is shaped like a reverse round hook, which is pinched inward before the U-hook is raised. The right hook is a longer version of the pinched round hook. A thicker hook than the body is processed to prevent it from slipping out and is incorporated inside the body. (For information on the pinched round hook, please refer to the related links.) Our company handles the manufacturing, design, and prototyping of tension springs. Please feel free to consult us if you have any concerns. Tsuruoka Spring Co., Ltd. Contact: Ujiie Phone: 0235-22-0407 Fax: 0235-22-0546 Email: web@tohj.com

Company：鶴岡発條
Price：Other

Spring
Spring

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Twisted coil spring, urgent prototype, torque spring.

Short delivery response within 5 days after the request.

Material: Piano wire type A, SWP-A Wire diameter: Φ1.8 Prototype quantity = 5 pieces, delivered within 5 days after your request. Our company specializes in the manufacturing and design of twisted coil springs, including prototypes. Please feel free to contact us if you have any concerns. Tsuruoka Spring Co., Ltd. Technical Contact: Ujiie Phone: 0235-22-0407 FAX: 0235-22-0546 Email: web@tohj.com We also support web conferencing.

Company：鶴岡発條
Price：Other

Spring
Spring

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Compression spring, barrel polishing, glossy finish

It is finished to a shine with barrel polishing.

Material: Stainless steel wire for springs, SUS316-WPA Wire diameter: Φ4.0 After spring processing, the surface is polished to a shiny finish using barrel polishing. By finely adjusting the material, size, and polishing time of the media, a gloss like the one in the photo is achieved. We will display the actual product at the exhibition, and everyone is surprised by the level of gloss achieved just through barrel polishing. We are grateful for the trial and error on site. If you have any issues with springs, please feel free to consult us. Turuoka Spring Co., Ltd. Contact: Ujiie Phone: 0235-22-0407 FAX: 0235-22-0546 Email: web@tohj.com

Company：鶴岡発條
Price：Other

Spring
Spring

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Compression spring open end

The end shapes of compression springs are "closed end" and "open end."

The typical type is a closed end, where the tip of the coil at the end is in contact with the next coil. This single turn at the end is called a "seat coil" (zamaki). The seat coil serves to improve the stability of the spring when it is upright, but it does not have any functional role as a spring. The turns that function as a spring are those excluding the seat coil, and the number of turns that effectively function as a spring is referred to as the effective number of turns. The spring in the photo is an atypical "open end." The tip of the coil at the end is not in contact with the next coil, creating a gap (indicated by the arrow). The seat coils at both ends are less than one turn, resulting in fewer seat coils compared to a closed end. The reason for deliberately adopting a non-typical open end is mainly in the following cases: 1) When you do not want to change the spring constant (want to keep the effective number of turns fixed), and 2) When you want to keep the height at which the spring is in contact low (want to reduce the total number of turns). While reducing the seat coils may worsen the stability of the spring, it allows you to maintain the spring constant while keeping the contact height low.

Company：鶴岡発條
Price：Other

Spring
Spring

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Counting the number of turns in a spring

Care is needed in counting the number of turns of a spring.

I will count the number of coils in the photo of the compression spring. The number of lines = the number of circles = 5, therefore the number of coils = 5, but it is important to note that this is not the case. In the case of springs, one complete turn is counted as one coil. If you start counting from the left end, it will be one coil at the red circle. The star-marked area is still less than one coil, approximately 0.5 coils. The number of coils in this spring = 4 coils. By the way, the one coil at both ends is in contact with the adjacent coil and is called a "seat coil." The role of the seat coil is to improve stability when standing, and the seat coil itself does not function as a spring. The number of coils excluding the seat coils, which effectively work as a spring, is called the effective number of coils. This spring has an effective number of coils = 2 coils, total number of coils = 4 coils. If you have any questions or concerns about springs, please feel free to consult us. Our technical staff will respond carefully. Technical Contact: Ujiie Phone: 0235-22-0407 FAX: 0235-22-0546 Email: web@tohj.com Tsuruoka Spring Co., Ltd. We also support web conferences.

Company：鶴岡発條
Price：Other

Spring
Spring

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Extremely compact! Gas spring "CX Series"

With a maximum stroke length of 80mm, an extremely large initial load ranging from 5,100N to 19,200N is generated.

The "CX Series" is a very compact and powerful gas spring with a piston rod seal type, featuring unique safety and reliability functions. It has a maximum stroke length of 80mm and a high initial load ranging from 5,100N to 19,200N (depending on the cylinder diameter). With exceptional high load and pressure, the mounting methods available include bottom mounting, drop-in, and base plate mounting. 【Features】 ■ Available in three models: CX500, CX1000, and CX1900 ■ Compact overall length and cylinder diameter ■ Extremely high initial load ranging from 5,100N to 19,200N ■ Supports up to 200 SPM (shots per minute) ■ Equipped with KALLER safety mechanism *For more details, please refer to the PDF document or feel free to contact us.

Company：KALLER
Price：Other

Other molds
Spring

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Cam Unit for Press Molds "Flex Cam"

Contributes to shortening various metal processing processes such as piercing, cutting, forming, and flanging, as well as reducing mold costs. Can be installed on existing molds as well.

The "Flex Cam" consists of a hydraulic power unit/accumulator, a cam unit (force cylinder), and hoses, and can be used for piercing, cutting, forming, flanging, and more. Since multiple processes can be performed within the same mold, it has the potential to shorten the manufacturing process, as well as contribute to reducing sliding troubles and mold costs. There are five types of loads available: 15kN, 40kN, 60kN, 90kN, and 150kN, with stroke options of 25mm, 50mm, and 100mm. 【Features】 ■ Distributes force in the appropriate direction and speed ■ Can be installed on existing molds ■ Allows for flexible positioning of the driver and cam unit ■ Equipped with safety features against mold damage and overpressure ★ For more details, please refer to the product documentation (Japanese version). We are distributing three documents (English version) that include case studies.

Company：KALLER
Price：Other

Other molds
Spring

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Speed Control Gas Spring "SPC Series"

It is also possible to use piping as a hose system! A gas spring that reduces the speed of the last 30 millimeters of the return stroke, expected to improve productivity.

The "SPC Series" is a gas spring developed to reduce or eliminate the rebound of the blank holder. It is particularly suitable for use with molds that have a fast return stroke speed. By decelerating the piston rod speed to 0.4 m/s during the last 30 mm of the return stroke, a damping effect is achieved, allowing the blank holder to stop smoothly. 【Features】 ■ Reduction or elimination of blank holder rebound ■ Increased shot count and improved productivity due to reliable part transport ■ Easy retrofitting to existing molds ■ Stroke length: 80 to 300 mm ■ Patent No. SE 517269, DE 102 96 883 and US 7,121,538 *For more details, please refer to the PDF document or feel free to contact us.

Company：KALLER
Price：Other

Other Auto Parts
Spring

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Powerline Heavy Duty "TX Series"

It is possible to select from a wide range of high initial loads and long strokes. The pressure source is nitrogen, and it can be used in an ambient temperature of 0 to 80°C.

The "TX Series" is a type of product that combines the high load capacity of the X spring with the external dimensions and stroke length of the TU spring. It is equipped with a filling port on the side or bottom for piping connections. The pressure source can be nitrogen, and it can be used in an environmental temperature range of 0 to 80°C. Options for hose and hose-less base plate connection filling ports are available. For more details, please contact us. 【Features】 ■ Initial load of 7,400 to 200,000N ■ Filling port on the side or bottom for piping connections ■ Upper C groove, lower U groove, and bottom tap installation for various standard mounting ■ Filling ports for hose and hose-less base plate connections available (optional) ■ Unique guide structure (flex guide) that is resistant to eccentric loads *For more details, please refer to the PDF document or feel free to contact us.

Company：KALLER
Price：Other

Other molds
Spring

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Size TL750 to 7500: Gas Spring "TL Series"

The pressure source is nitrogen gas! A low overall length series compatible with various standard mounts. Initial load from 7500 to 75000N, stroke length up to 250mm.

The "TL Series" is a gas spring lineup with sizes ranging from 750 to 7500. Its features and technology are similar to the "TU Series." The overall length is shorter compared to the TU Series, with the TL750 to 3000 being 25mm shorter, the TL5000 being 37.5mm shorter, and the TL7500 being 50mm shorter. The same mounts can be used, and the same strokes are available except for 12.5, 37.5, and 62.5. 【Features】 ■ Initial load: 7500 to 75000N ■ Stroke length: up to 250mm ■ Equipped with upper C grooves, lower U grooves, and bottom taps, compatible with various standard mounts. *For more details, please refer to the PDF materials or feel free to contact us.

Company：KALLER
Price：Other

Other machine elements
Spring

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Counterbalance GS 'TEBT/TEBEB 750-5000'

A counterbalance gas spring boasting long lifespan! It has spherical ends with bearings and flat ears.

The "TEBT/TEBEB 750-5000" is a counterbalance gas spring with a spherical shape and flat ears, equipped with bearings for installation. The "TEBT" type has ears (with bearings) at the bottom of the cylinder, and the top of the piston rod has a female thread. The "TEBEB" type has ears at both ends of the spring. The standard spring is designed for indoor use only. If you require one for outdoor use, please check with your company's distributor. 【Basic Information (Excerpt)】 ■ Pressure Source: Nitrogen ■ Maximum Filling Pressure: 150 bar ■ Minimum Filling Pressure: 25 bar ■ Operating Temperature: 0 to +80℃ ■ Load Variation Due to Temperature Change: ±0.3%/℃ *For more details, please refer to the PDF document or feel free to contact us.

Company：KALLER
Price：Other

Other machine elements
Spring

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Achieve a lifespan of 1 million hits! Soft Hit Striker Plate SSP

Equipped with a damper function that can absorb unnecessary impact loads, such as in gas springs! Spring load of 7,500 to 10,000 N.

The "Soft Hit Striker Plate SSP" is equipped with a special damper function to absorb excessive press maintenance, noise pollution, and unnecessary impact loads. It was developed to address issues such as excessive impact loads, high noise levels, and the decline in the quality of parts faced by metal stampers. 【Features】 ■ Suitable for coil springs, gas springs, and cushion pins ■ Spring load of 7,500 to 10,000 N ■ Achieves a lifespan of 1 million cycles ■ Installation with two counterbored holes (M10) ■ Heat-treated contact surfaces ■ Maximum frequency of SPM 20 *For more details, please refer to the PDF document or feel free to contact us.

Company：KALLER
Price：Other

Other machine elements
Spring

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Equipped with our unique safety mechanism! Gas spring mini 'R12 series'

Cylinder diameter = Our company's minimum φ12, maximum initial load = 500N! Equipped with our unique overpressure protection mechanism and safety rod.

The "R12 Series" is a gas spring that can also be used as piping by utilizing the M6 filling rod and micro hose system. The upper and lower C grooves and the bottom tap allow for various mounting methods when used with the FCR-12. Additionally, it is equipped with our unique over-pressure protection mechanism and safety rod. 【Features】 ■ Delivered with four types of pre-adjusted loads ■ Safety rod ■ Over-pressure protection mechanism ■ Can be used as piping *For more details, please refer to the PDF materials or feel free to contact us.

Company：KALLER
Price：Other

Other machine elements
Spring

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Spring Product List and Ranking from 94 Manufacturers, Suppliers and Companies | IPROS GMS

Spring Manufacturer, Suppliers and Company Rankings

Spring Product ranking