We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Tester.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Tester Product List and Ranking from 42 Manufacturers, Suppliers and Companies

Last Updated： Aggregation Period:Sep 03, 2025～Sep 30, 2025
This ranking is based on the number of page views on our site.

Tester Manufacturer, Suppliers and Company Rankings

Last Updated： Aggregation Period:Sep 03, 2025～Sep 30, 2025
This ranking is based on the number of page views on our site.

  1. フクダ Tokyo//Testing, Analysis and Measurement
  2. null/null
  3. ナック Tokyo//Industrial Electrical Equipment
  4. 4 TAKAYA Corporation Okayama//Industrial Electrical Equipment
  5. 5 コスモ計器 Tokyo//Testing, Analysis and Measurement
Go to Company Ranking

Tester Product ranking

Last Updated： Aggregation Period:Sep 03, 2025～Sep 30, 2025
This ranking is based on the number of page views on our site.

  1. 接合強度試験機『MFMシリーズ／ABTシリーズ』
  2. Technical Documentation: Introduction to Leak Testers ナック
  3. "Comprehensive Product Guide" "Technical Manual" ／ Fukuda Leak Test フクダ
  4. 4 Basic Knowledge of In-Circuit Testing: What is an In-Circuit Tester? TAKAYA Corporation
  5. 5 Nodson DAGE Bond Tester (Joint Strength Testing Machine) オーヨー

Tester Product List

436～450 item / All 1183 items

Displayed results
Techno Tester "RT-2000LD" [Rental]

Techno Tester "RT-2000LD" [Rental]

You can check the tensile load of exterior tiles and other materials using the filler attachment.

The load unit can be easily switched between "kgt" and "kN" with one button, and it can measure up to a maximum load of "20.00kN (2040kgf)." 【Features】 ■ Safe and Convenient Its compact and lightweight design allows for reliable measurements even in narrow spaces or difficult working conditions by a single person. ■ Unit switching can be done with one button. ■ Auto Power Off Function This feature automatically turns off the display approximately 20 minutes after button operation to prevent battery drain. If the display turns off due to auto power off, you can restore it by turning the power switch to "off" and then back to "on." (When resuming from auto power off, the maximum value will be cleared.)

  • Flaw detection testing

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Point Load Testing Machine [Rental]

Point Load Testing Machine [Rental]

The uniaxial compressive strength of the collected rock can be easily estimated.

The uniaxial compressive strength of the collected rock can be estimated on-site. The Bourdon tube pressure gauge is equipped with two ranges, 5 MPa and 70 MPa, allowing for high-resolution readings at both low and high loads.

  • Soil testing

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Leak Tester "LS3010"

Leak Tester "LS3010"

Quickly and reliably check for air leaks in products! Inspection can be done without power.

The "LS3010" is a testing machine that can confirm the presence or absence of air leaks due to seal defects, pinholes, etc., in small bag packages filled with powders or granules while containing gas inside. There are various methods for leak testing, but this product adopts a visual submerged method that can be implemented immediately by the customer after purchase, featuring easy operation and space-saving design. 【Features】 ■ Can confirm the presence or absence of air leaks in small bag packages ■ Adopts a visual submerged method that can be implemented immediately after purchase ■ Easy operation ■ Space-saving *For more details, please refer to the PDF document or feel free to contact us.

  • Leak Testing Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Original Design Case Studies] Leak Test Equipment

[Original Design Case Studies] Leak Test Equipment

We would like to introduce an example of our original design achievements in devices and tools: the leak test device.

Our company provides original designs tailored to the information requested, the needs of our customers, and the environment of the factories where the equipment will be used, ranging from devices and jigs to automation equipment. We handle everything from assembly to installation with our unique dedicated designs. This time, we would like to introduce an example of our achievements: the [Leak Test Device] that we designed. [Specifications of the Leak Test Device] 1. After setting the workpiece, pressing the start button clamps the workpiece from both directions. 2. Air is supplied, and the results are sent to the leak tester. 3. After passing the test, the device unclamps. If it fails, it remains clamped, and the NG lamp lights up. [Reasons for Choosing Our Original Design] ■ Expertise in unique design (We can handle everything from electrical control design to hardware and software in one go.) ■ Quick response time (All production is handled in-house.) ■ Support until startup (We can visit your factory to assist with installation and startup operations.) *For more details, please refer to the PDF document or feel free to contact us.

  • Other processing machines

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
EVCS2 Tester Type 2

EVCS2 Tester Type 2

Make charging stations reliable and secure! Simulation of conditions and values with different vehicles is possible.

The "EVCS2 Tester Type 2" is a testing device for EVCS2 charging facilities. It monitors the PWM signal, electric fields of L1, L2, L3, and leakage current at the measurement socket CP. It is capable of simulating conditions and values with different vehicles. Additionally, it is made of plastic with a rubber cover for field use and comes with a Type 2 charging connector with a 1m cable. 【Features】 ■ Ensures the charging station is appropriate and reliable ■ Checks charging current ■ Checks PE connection between PWM and vehicle connector ■ Simulates disconnection of PE ground connection ■ Monitors PWM signal at the measurement socket CP ■ Monitors electric fields of L1, L2, L3 and leakage current *For more details, please refer to the PDF document or feel free to contact us.

  • Other Connectors
  • Other inspection equipment and devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Injector Tester (Testing Machine) | Made by CarbonZapp

Injector Tester (Testing Machine) | Made by CarbonZapp

There are models for diesel and gasoline direct injection! Introducing a dedicated testing machine for injectors. By testing individually, we optimize the evaluation of their performance.

Our company, Showa Co., Ltd., is the exclusive domestic distributor of Carbon Zapp, a manufacturer of testers for injectors used in clean diesel and direct-injection gasoline engines. Carbon Zapp's injector testers utilize unique technology that domestic manufacturers cannot match, allowing them to accommodate various injectors. They are also user-friendly and feature a stylish design, making them high-performance testers (testing machines). 【Common Issues with Injectors】 - Common rail injectors cannot be tested with conventional equipment... - Even when replacing with new parts, proper evaluation of good or bad condition cannot be made... - Even if replaced with new parts, issues remain unresolved without identifying the cause... 【Features of the Carbon Zapp Tester】 - Not only can injection volume and pressure be checked, but the spray condition can also be visually confirmed. - Includes a function to reissue correction codes. - Compatible with a variety of manufacturers (Bosch, Denso, Delphi, etc.) - Available models for both diesel and gasoline. *For more details, please view the materials from [PDF Download] or feel free to [Contact Us]. *October 27, 2021: Japanese version materials have been added.

  • ds1r.jpg
  • cr2r.jpg
  • brand06.jpg
  • Engine parts

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Fluidization segregation tester

Fluidization segregation tester

Testing the tendency of segregation in fluidized powder particles!

The tendency of segregation of fluidized powder particles due to airflow can be tested with a sample size of about 10 mL. In a fluidized bed, fine particles generally remain at the top for a long time due to the air they contain, while larger, denser particles tend to gather at the bottom, leading to segregation. After mixing with a mixer, during filling and discharging, or when transporting by air, the likelihood of segregation due to fluidization increases.

  • Other physicochemical equipment
  • Other measurement, recording and measuring instruments
  • Other powder equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Shifting segregation tester

Shifting segregation tester

For testing the tendency of segregation due to the sieving effect of powder particles!

The tendency for segregation due to sifting can be tested with a sample size of approximately 50 mL. Segregation due to sifting refers to the most common segregation phenomenon where smaller particles pass through the gaps between larger particles. This mechanism is most likely to occur when a bulk material is composed of particles of different sizes and there is movement between the particles, such as during processes like filling or transfer.

  • Other measurement, recording and measuring instruments
  • Testing Equipment and Devices
  • Analytical Equipment and Devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Battery Tester (BTC Battery Calorimeter)

Battery Tester (BTC Battery Calorimeter)

Various battery tests are possible.

This is a calorimeter for battery testing, featuring an adiabatic type and an isothermal type. It allows for safe testing directly from small rechargeable batteries to large rechargeable batteries. It can capture and record footage of batteries bursting under increased temperature and pressure. Automatic nail penetration testing is also possible. The device size can be selected from a tabletop model to a large apparatus for testing EV/HEV and aircraft batteries. It is equipped with a high-pressure container, automatic safety valves, and emergency cooling safety mechanisms for automatic shutdown.

  • Testing Equipment and Devices
  • Other physicochemical equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Battery Tester BTC-500 (Portable Insulated Calorimeter)

Battery Tester BTC-500 (Portable Insulated Calorimeter)

It is a floor-mounted movable calorimeter for safely testing the thermal, electrical, and mechanical stress of large battery cells and small modules.

The evaluation of these tests facilitates the assessment of the safety performance of battery cells, enables the definition of the safe operating limits of batteries, and makes it easier to research and develop the mechanisms of thermal runaway and thermal propagation. It is possible to optionally capture footage of battery explosions, conduct nail penetration tests, perform temperature mapping of samples, and sample released gases. This is a large-scale device capable of testing batteries for EV/HEV and aircraft. It is equipped with a container to hold fragments and smoke during sample explosions, an automatic safety valve, and an emergency cooling safety mechanism for automatic shutdown. Safety Testing Defines safe operating limits. To avoid the risks of thermal runaway and the potentially catastrophic consequences it may bring, it is essential to identify the safe operating limits of battery cells, modules, and packs. Therefore, batteries must be subjected to mechanical, electrical, and thermal stress to define safe operating limits. Thermal stability data from thermal stress tests can help define the safe operating temperature of the battery. Evaluating overcharge and discharge rates allows for the determination of maximum safe voltage and maximum safe current. The effects of mechanical stress and external short circuits (ESC) can also be assessed.

  • Testing Equipment and Devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Battery Tester BTC-130 (Benchtop Insulated Calorimeter)

Battery Tester BTC-130 (Benchtop Insulated Calorimeter)

This is a bench-scale calorimeter for stress testing small batteries. It also supports a small amount of ARC-type test cells.

The BTC-130 (Battery Test Insulated Reaction Calorimeter) is a bench-scale insulated calorimeter designed to test heat, electrical, and mechanical stress on small battery cells. The evaluation of these tests facilitates the assessment of the safety performance of battery cells, the safe operating limits of batteries, and the research and development of thermal runaway mechanisms. The BTC-130 also supports the use of small quantities of ARC-type test cells, enabling the thermal stability screening of individual battery components under insulated conditions.

  • Testing Equipment and Devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Battery Tester iso-BTC (Benchtop Isothermal Calorimeter)

Battery Tester iso-BTC (Benchtop Isothermal Calorimeter)

It is a calorimeter for evaluating the characteristics of battery cells under normal and long-term usage conditions. It supports adapters compatible with various cell shapes.

The iso-BTC (Battery Testing Calorimeter) is an isothermal calorimeter designed for the characterization of the thermal behavior and electrical performance of battery cells under normal and long-term usage conditions. It supports a variety of adapters that enable the analysis of diverse cell shapes. The iso-BTC can fully integrate a charge-discharge unit, allowing for the repeated automatic cycling of battery cells under various operating conditions while simultaneously recording both the electrical performance of the battery and the heat generated. It also enables accelerated degradation testing, allowing for the investigation of the effects of battery degradation on cell performance. The chemical properties of the battery, the composition of the electrodes, and the type of battery cell can also be investigated in cell development using the iso-BTC. Through thermal mapping (multi-point temperature measurement), users can identify areas of the battery that generate larger amounts of thermal energy, which are highlighted. In addition to characterizing the thermal behavior of battery cells at various temperatures and (discharge) charge rates, this information can be used to develop effective and targeted thermal management strategies within battery modules and packs.

  • Testing Equipment and Devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Fogging Tester "FT-01"

Fogging Tester "FT-01"

Wide range and high-precision temperature control device! Supports combinations of non-standard test conditions.

The "FT-01" is a fogging tester designed for evaluating the fogging characteristics of volatile components in decorative materials used in automobiles and aircraft. It can also be used for testing the fogging phenomenon of high-intensity discharge (HID) headlights in vehicles. The six test stations can conduct sample tests or blank tests simultaneously. 【Features】 - Guarantees accurate and reliable test data through stable operating conditions - Supports multi-method testing to meet various testing requirements - Microcomputer control with an LED digital display and PVC operation panel - Quickly and intuitively displays test data and results - Designed for evaluating the fogging characteristics of volatile components in decorative materials used in automobiles and aircraft *For more details, please refer to the PDF materials or feel free to contact us.

  • Testing Equipment and Devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Leak Tester "LEAK-01"

Leak Tester "LEAK-01"

Vacuum level and time can be set in advance! Test data and measured curves are displayed in real time.

"LEAK-01" is a leak tester suitable for leak tests of packaging bags, bottles, cans, boxes, etc., using the vacuum method. The results of sealing treatment and leak tests are also useful as a reference when determining other technical parameters. Additionally, this product can be used for seal performance testing after drop tests and compression tests. 【Features】 ■ Precise pressure testing using the vacuum method (significantly improves testing accuracy) ■ Provides users with a comfortable and smooth operating experience ■ High-speed, high-precision chip ensures accuracy and efficiency of tests ■ Safety designs such as over-voltage protection and power-down memory ■ Ensures system stability during testing *For more details, please refer to the PDF materials or feel free to contact us.

  • Testing Equipment and Devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Gross Leak Test

Gross Leak Test

Adopting a water immersion pressure method to pressurize the inside of the container, quantitatively measuring the seal strength of the package, heat seal quality, burst strength, and leak prevention.

We adopt a water immersion pressure method to pressurize the inside of the container, quantitatively measuring the seal strength of the package, heat seal quality, burst strength, and leak prevention. We conduct quantitative measurements of the sealing performance of plastic anti-tampering caps, expandable packages, soft tubes, and medical packages, as well as analysis tests on the sealing performance, compression resistance, and burst strength of various bottles. Standards: ASTM F2096, ASTM F2054, ASTM F1140, ISO 11607-1, ISO 11607-2, GB 18454, GB 19741, GB 10440, GB 17447, GB/T 17876, GB/T 10004, GB/T 10005, BB/T 0003, BB/T 0025, QB/T 1871, YBB 00162002, YBB 00252005.

  • Other measurement, recording and measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Tester

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.