We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Tester.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Tester×アイビック・リサーチ - List of Manufacturers, Suppliers, Companies and Products

Tester Product List

1～9 item / All 9 items

Displayed results
Fluidization segregation tester

Fluidization segregation tester

Testing the tendency of segregation in fluidized powder particles!

The tendency of segregation of fluidized powder particles due to airflow can be tested with a sample size of about 10 mL. In a fluidized bed, fine particles generally remain at the top for a long time due to the air they contain, while larger, denser particles tend to gather at the bottom, leading to segregation. After mixing with a mixer, during filling and discharging, or when transporting by air, the likelihood of segregation due to fluidization increases.

  • Other physicochemical equipment
  • Other measurement, recording and measuring instruments
  • Other powder equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Shifting segregation tester

Shifting segregation tester

For testing the tendency of segregation due to the sieving effect of powder particles!

The tendency for segregation due to sifting can be tested with a sample size of approximately 50 mL. Segregation due to sifting refers to the most common segregation phenomenon where smaller particles pass through the gaps between larger particles. This mechanism is most likely to occur when a bulk material is composed of particles of different sizes and there is movement between the particles, such as during processes like filling or transfer.

  • Other measurement, recording and measuring instruments
  • Testing Equipment and Devices
  • Analytical Equipment and Devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Battery Tester (BTC Battery Calorimeter)

Battery Tester (BTC Battery Calorimeter)

Various battery tests are possible.

This is a calorimeter for battery testing, featuring an adiabatic type and an isothermal type. It allows for safe testing directly from small rechargeable batteries to large rechargeable batteries. It can capture and record footage of batteries bursting under increased temperature and pressure. Automatic nail penetration testing is also possible. The device size can be selected from a tabletop model to a large apparatus for testing EV/HEV and aircraft batteries. It is equipped with a high-pressure container, automatic safety valves, and emergency cooling safety mechanisms for automatic shutdown.

  • Testing Equipment and Devices
  • Other physicochemical equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Fogging Tester "FT-01"

Fogging Tester "FT-01"

Wide range and high-precision temperature control device! Supports combinations of non-standard test conditions.

The "FT-01" is a fogging tester designed for evaluating the fogging characteristics of volatile components in decorative materials used in automobiles and aircraft. It can also be used for testing the fogging phenomenon of high-intensity discharge (HID) headlights in vehicles. The six test stations can conduct sample tests or blank tests simultaneously. 【Features】 - Guarantees accurate and reliable test data through stable operating conditions - Supports multi-method testing to meet various testing requirements - Microcomputer control with an LED digital display and PVC operation panel - Quickly and intuitively displays test data and results - Designed for evaluating the fogging characteristics of volatile components in decorative materials used in automobiles and aircraft *For more details, please refer to the PDF materials or feel free to contact us.

  • Testing Equipment and Devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Leak Tester "LEAK-01"

Leak Tester "LEAK-01"

Vacuum level and time can be set in advance! Test data and measured curves are displayed in real time.

"LEAK-01" is a leak tester suitable for leak tests of packaging bags, bottles, cans, boxes, etc., using the vacuum method. The results of sealing treatment and leak tests are also useful as a reference when determining other technical parameters. Additionally, this product can be used for seal performance testing after drop tests and compression tests. 【Features】 ■ Precise pressure testing using the vacuum method (significantly improves testing accuracy) ■ Provides users with a comfortable and smooth operating experience ■ High-speed, high-precision chip ensures accuracy and efficiency of tests ■ Safety designs such as over-voltage protection and power-down memory ■ Ensures system stability during testing *For more details, please refer to the PDF materials or feel free to contact us.

  • Testing Equipment and Devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Gross Leak Test

Gross Leak Test

Adopting a water immersion pressure method to pressurize the inside of the container, quantitatively measuring the seal strength of the package, heat seal quality, burst strength, and leak prevention.

We adopt a water immersion pressure method to pressurize the inside of the container, quantitatively measuring the seal strength of the package, heat seal quality, burst strength, and leak prevention. We conduct quantitative measurements of the sealing performance of plastic anti-tampering caps, expandable packages, soft tubes, and medical packages, as well as analysis tests on the sealing performance, compression resistance, and burst strength of various bottles. Standards: ASTM F2096, ASTM F2054, ASTM F1140, ISO 11607-1, ISO 11607-2, GB 18454, GB 19741, GB 10440, GB 17447, GB/T 17876, GB/T 10004, GB/T 10005, BB/T 0003, BB/T 0025, QB/T 1871, YBB 00162002, YBB 00252005.

  • Other measurement, recording and measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Leak Tester ELT-201WP

Leak Tester ELT-201WP

USP 1207.2 International Packaging Standards, Japanese Pharmacopoeia 18th Edition Reference Information Compliance Leak Tester (Methylene Blue Staining Test Method)

Compliant with USP 40(5)<1207.2> and international packaging standards, as well as the reference information G7 1.3. tracer liquid testing method (dye penetration test method) of the Japanese Pharmacopoeia 18th edition. This compact tabletop leak tester uses the dye penetration test method and is a highly effective device for checking leaks in transparent packaging containers such as packaged strips, blisters, small bags, and ampoules.

  • Other physicochemical equipment
  • Leak Testing Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Leak & Seal Tester

Leak & Seal Tester

Quantitative measurement of seal strength at the seal edge, heat seal quality, burst strength, and leak prevention by pressurizing the inside of the container.

We quantitatively measure the seal strength of the seal edge under pressure inside the container, heat seal quality, burst strength, and leak prevention. We test the sealing performance, compression resistance, and burst strength of plastic tamper-evident caps, expansion packages, soft tubes, medical packages, and various bottles. Standards: ASTM F2054, ASTM F1140, ISO 11607-1, ISO 11607-2, GB 18454, GB 19741, GB 10440, GB 17447, GB/T 17876, GB/T 10004, GB/T 10005, BB/T 0003, BB/T 0025, QB/T 1871, YBB 00162002, YBB 00252005.

  • Other measurement, recording and measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Heat Seal Tester

Heat Seal Tester

Create a heat seal and determine the heat seal parameters such as heat seal temperature, seal pressure, and heating time.

Create heat seals and determine heat seal parameters such as heat seal temperature, seal pressure, and heating time. This is the inspection equipment required for laboratories and factories. Standards: ASTM F2029, QB/T 2358, YBB 00122003

  • Other measurement, recording and measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Tester

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.