We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Testing Machine.
ipros is IPROS GMS IPROS One of the largest technical database sites in Japan that collects information on.

Testing Machine×安田精機製作所 - List of Manufacturers, Suppliers, Companies and Products

Testing Machine Product List

31~45 item / All 62 items

Displayed results

199 Insulation Breakdown Voltage Test Machine [for Insulating Films and Enamel Wires]

It is a testing machine (insulation resistance tester, dielectric strength tester) for evaluating the insulation strength of solid electrical insulating materials, including the insulation film between the positive and negative electrodes of lithium-ion batteries!

- This is a testing machine for evaluating the insulation strength of solid electrical insulating materials (insulation strength testing machine, dielectric strength testing machine). - By changing the electrodes, it can accommodate test specimens such as plates, sheets, fabrics, films, tapes, tubes, varnishes, and coatings. - Recently, it has also been used for the insulation films between the positive and negative electrodes inside lithium-ion batteries. - Even if the test specimen is enameled wire, by changing the electrodes, insulation breakdown tests can be conducted using the metal foil method or the two-electrode method. - It supports both continuous voltage increase method and step voltage increase method. - It is also compatible with guarantee tests and dielectric strength tests. <Reference Standards> JIS-C2110, (C3003), C3216-5, IEC-60851-5 【Regarding Catalog Download】 Please request the catalog from the related links below or by contacting us. *For products without a standalone catalog, please request the comprehensive catalog.

  • Testing Equipment and Devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

210 Magnet Wire Wear Testing Machine

It is a testing machine (wear testing machine) for evaluating the wear resistance of enamel wire using the blade reciprocating method.

- This is a testing machine (wear testing machine) for evaluating the wear resistance of enamel wire using the blade reciprocating method. - Attach the test specimen, remove the insulation coating from one end, and connect the test specimen conduction cable. - Lower the blade onto the test specimen, apply a specified load, and move the blade back and forth to wear down the insulation coating of the test specimen. - Measure the number of cycles until conduction occurs, which will determine the wear resistance. - By rotating the test specimen, measurements can be taken three or four times with the same specimen. <Reference Standards> NEMA-C9.5, JASO, ISO-6722 [Regarding Catalog Download] Please request the catalog through the related links below or by contacting us. *For products without a single item catalog, please request the comprehensive catalog.

  • Testing Equipment and Devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

260 Form Rubber Repeated Compression Testing Machine

A repeated compression residual strain test will be conducted on soft foamed materials such as polyurethane foam and latex foam using Method B (constant displacement method).

- This is a testing machine (repeated compression testing machine, polyurethane foam repeated compression testing machine, foam rubber repeated load compression testing machine) that conducts repeated compression residual strain tests on soft foamed materials such as polyurethane foam and latex foam using Method B (constant displacement method). - After measuring the thickness of the test specimen, it is placed between parallel plates and compressed to 50% of its original thickness at a rate of 60 times per minute, and this is repeated continuously for 80,000 cycles. - After that, the test specimen is removed and left for 30 minutes under specified conditions, and the thickness of the specimen is measured again. - The thickness reduction rate is calculated from the thickness before and after the test, which is then defined as the repeated compression residual strain. <Reference Standards> JIS-(K6382), K6400-4 【About Catalog Download】 Please request the catalog from the related links below or by contacting us. *For products that do not have a standalone catalog, please request the comprehensive catalog.

  • Testing Equipment and Devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

306 FPC Buckling Test Machine

We evaluate the bend resistance of plastic films and FPC (Flexible Printed Circuit Boards, Flexible Printed Boards).

- This is a testing machine (bending resistance testing machine, flexible printed circuit board bending fatigue testing machine) used to evaluate the bending resistance of plastic films and FPCs (flexible printed circuit boards). - The test specimen is bent to the specified bending radius as defined in individual standards and fixed between a parallel fixed plate and a movable plate while current is passed through the specimen to prepare for the test. - The movable plate is moved back and forth at a specified speed to bend the test specimen, continuing until the current flowing through the specimen stops, and the number of bends up to that point is recorded. - We also offer the model [306-L type] for testing in a low-temperature chamber. <Reference Standard> JIS-C5016 <Regarding Catalog Download> Please request the catalog from the related links below or by contacting us. *For products without individual catalogs, please request the comprehensive catalog.

  • Testing Equipment and Devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

102 Gear-type Aging Test Machine (Forced Circulation Air Heating Aging Test Machine)

Intuitive operation and various functions realized with a touch panel!

- This is a gear oven (forced circulation air heating aging test machine) used to evaluate the thermal stability and heat aging resistance of polymer materials such as plastics and rubber, as well as electric wires, through heated air. - After heating the test specimens at a specified temperature for a specified time while forcing air circulation, tensile strength, elongation at break, tensile stress, hardness, and other properties are measured to determine the changes compared to before heating. It is also used for heating tests of insulated wires. - The air replacement rate is based on the power consumption method. [SHF-S Type] Equipped with a touch panel for measuring and displaying the air replacement rate. The opening degree of the intake and exhaust dampers is manually set. [SHF-SA Type] Equipped with an automatic adjustment function for the air replacement rate via a touch panel. The opening degree of the intake and exhaust dampers is automatically set. <Reference Standards> JIS-A5756, B7757, C3005, K6257, K6723, K7212, K7368, ASTM-D573, D5374, D5423, E145, UL-746B, IEC-60216-4-1, ISO-188, 4577 【Regarding Catalog Download】 Please request the catalog from the related links below or by contacting us. *For products without individual catalogs, please request the comprehensive catalog.

  • Contract measurement

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

553-M Pencil Scratch Hardness Tester (Electric)

Electric scratch testing! We also have a type that can test with two pencils at once!

- This is a testing machine that can be operated electrically instead of manually turning the handle for pencil scratch hardness testing. - We also offer the M2 type, which allows testing with two pencils at once. - The hardness value is determined by scratching the coated surface at a 45° angle, using the hardest pencil that shows no signs of coating damage or scratches. - It is also used for evaluating the scratch hardness of decorative boards and the solvent resistance of enamel wires. <Reference Standards> JIS-(C3003), C3216-4, D0202, (K5400), K5600-5-4, K5651, K6894, K6902, ASTM-D2197, D3363, ISO-15184, IEC-60851-4 【About Catalog Download】 Please request the catalog from the related links below or by contacting us. *For products without a standalone catalog, please request the comprehensive catalog.

  • Strength Testing Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

156-AUTO Marron Mechanical Stability Testing Machine (Automatic)

This is an automated testing machine for the mechanical stability of maron. It also allows for pressure application using a handle via a switch.

- This is an automated device for measuring mechanical stability (Marron tester). - The loading method is based on actual load, and when the start button is pressed, the rotating disc automatically descends and stops rotating after a specified time. - Pressure can also be applied using a handle via a switch. <Reference Standards> JIS-(K6387), (K6392), (K6828) [Regarding Catalog Download] Please request the catalog from the related links below or by contacting us. *For products without individual catalogs, please request the comprehensive catalog.

  • Testing Equipment and Devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

122 Test Tube Aging Test Machine

Test equipment for degrading rubber by air heating at a maximum of 300 °C.

- This is a testing machine that deteriorates vulcanized rubber and thermoplastic rubber through air heating. - Compared to gear-type aging testing machines, it minimizes the effects of additive migration between test specimens due to air convection. - The test specimens are attached inside a test tube (test tube) with air inlet and outlet pipes, placed in a heating device pre-adjusted to the test temperature, and heated at the specified temperature for the specified time. - After heating, tensile strength, elongation at break, tensile stress, hardness, etc., are measured, and the thermal aging characteristics are evaluated based on the changes from before heating. - Up to four test specimens can be placed inside an independent test tube. <Reference Standards> JIS-K6257, ASTM-D865, ISO-188 【Regarding Catalog Download】 Please request a catalog from the related links below or by contacting us. *For products without individual catalogs, please request the comprehensive catalog.

  • Other measurement, recording and measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

156 Marron Machine Stability Test Device

This is a testing machine for evaluating the mechanical stability of synthetic latex and synthetic resin emulsions.

- Weigh 50±0.5g of the sample filtered through a wire mesh and place it in the sample container, then lower the rotating disc onto the polyethylene liner surface at the bottom of the sample container. Apply the specified load to the polyethylene liner and rotate it at a speed of 1000±20 revolutions per minute. After rotating for the specified time, filter the solidified material using the wire mesh and measure its mass after drying. - Calculate the solidification rate of the sample and evaluate the mechanical stability based on the mesh opening of the wire mesh, the scale of the balance, the rotation time, and the temperature at the time of stopping the rotation. <Reference Standards> JIS-(K6387), (K6392), (K6828) 【Regarding Catalog Download】 Please request the catalog from the related links below or by contacting us. *For products without a single item catalog, please request the comprehensive catalog.

  • Other measurement, recording and measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

171-A/B Compression Permanent Deformation Tester (Compact Version!)

This is a testing machine that measures the compression permanent strain of vulcanized rubber and thermoplastic rubber (compression permanent strain test) to determine their compression set.

- It supports testing under normal, high, and low temperature conditions. - In the case of tests at normal and high temperatures, the specimen is compressed at normal temperature, held for a specified time under normal or high temperature conditions, then released from compression, and the thickness is measured after a specified time. - In the case of tests at low temperatures, the specimen is compressed at normal temperature, held for a specified time under the specified low temperature conditions, then released from compression under the same low temperature conditions, and the thickness is measured after a specified time. - The compression ratio can be changed by using spacers inserted between the compression plates. ★★ A compact type has been introduced! → For more details, please visit our website https://yasuda-seiki.co.jp/product/plastic_rubber/william-plastometer-etc/#toc-3 <Reference Standards> JIS-A5756, K6262, ASTM-D395, ISO-815 【About Catalog Download】 Please request the catalog from the related links below or by contacting us. *For products without a single item catalog, please request the comprehensive catalog.

  • Other measurement, recording and measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

208 Automotive Low Voltage Wire Abrasion Testing Machine

This is a testing machine (abrasion resistance tester, cable abrasion tester) for evaluating the abrasion resistance of low-voltage wires for automobiles using the abrasion tape method.

- This is a testing machine (wear resistance testing machine, cable wear testing machine) for evaluating the wear resistance of low-voltage automotive wires using the wear tape method. - The test specimen is fixed in contact with the wear tape, and a specified weight is placed on top. - The wear tape is moved at a specified speed until the conductor within the test specimen comes into contact with the wear tape, and the length of the wear tape used up to that point is measured. - After adjusting the position of the test specimen and measuring the specified number of times, the wear resistance value is calculated. <Reference Standards> JIS-C3406, JASO, ISO-6722 [Regarding Catalog Download] Please request the catalog through the related links below or by contacting us. *For products without a standalone catalog, please request the comprehensive catalog.

  • Other measurement, recording and measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

201 Vinyl Leather Cross Cold Resistance Testing Machine

It is a testing machine (cold resistance testing machine, cold resistance testing device) for conducting cold resistance tests on vinyl leather cloth, plastic, rubber-coated fabric, etc.

- This is a testing machine (cold resistance testing machine, cold resistance testing device) for conducting cold resistance tests on vinyl leather cloth, plastic, rubber-coated fabrics, etc. - Fix the test specimen in the chuck of the specimen holder and attach it so that the specimen is positioned at the center of the anvil in the low-temperature chamber. - After installing it in the low-temperature chamber, drop the falling body 5 minutes later to check for any cracks in the test specimen. - By rotating the specimen holder, up to 6 tests can be conducted continuously. - The cooling method can be selected between dry ice type and refrigeration type. <Reference Standards> JIS-K6404-13, (K6404-13), K6772, ISO-4675 【Regarding Catalog Download】 Please request the catalog from the related links below or by contacting us. *For products without a single item catalog, please request the comprehensive catalog.

  • Other measurement, recording and measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

311 Garley-type Flexibility Testing Machine

This is a testing machine (Gale-style stiffness tester) used to evaluate the brittleness (bending resilience) of materials such as rigid paper, plastic film, and textiles.

- The Garle method primarily evaluates the stiffness (bending resilience) of materials such as stiff paper, plastic film, and textiles. - The test specimen is attached to the chuck of a movable arm, and a weight is attached to the pendulum for preparation. - The movable arm is rotated to the left or right at a specified speed, and after the lower end of the test specimen makes contact with the pendulum once, the scale is read when it separates from the pendulum again to calculate the rigidity. <Reference Standards> JIS-(L1018), L1085, L1096, TAPPI-T543 [Regarding Catalog Download] Please request the catalog from the related links below or by contacting us. *For products without a standalone catalog, please request the comprehensive catalog.

  • Other measurement, recording and measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

315 Elmendorf Tear Tester

This is a testing machine for evaluating the tear strength of paper, cardboard, plastic films, and other materials using the Elmendorf tear method.

- This is a Elmendorf tear testing machine that evaluates the tear strength of paper, board, plastic films, and other materials using the Elmendorf tear method. - A pendulum in the shape of a fan is swung down from a fixed height to tear a test specimen that has been pre-cut, and the force required to tear it is read from the scale of the testing machine to calculate the tear strength. - Both load-type and light-load type options are available. - There is also a digital type [315-D] that allows for direct reading of tear strength. By entering the number of test pieces on the touch panel, it calculates the tear strength per piece (mN). Additionally, accurate testing can be performed with the loss correction function. <Reference Standards> JIS-K7128-2, P8116, TAPPI-T414, ISO-1974, 6383-2 [Regarding Catalog Download] Please request the catalog through the related links below or by contacting us. *For products without individual catalogs, please request the comprehensive catalog.

  • Other measurement, recording and measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

516-M Eriksen Coating Strength Testing Machine (Electric)

This is a testing machine for the Eriksen coating film strength test that has been made electric.

- This is an electric testing machine for evaluating the resistance of paint films to cupping, known as the Erichsen paint film strength tester. - The speed of the punch insertion is controlled electrically. - The test is conducted by either pushing the punch to a specified depth at a speed of 0.2±0.1 mm per minute (constant distance method) or continuing to push the punch until cracks or peeling of the paint film are observed (break distance method). - In the constant distance method, the cracking of the paint film and peeling from the substrate are evaluated. - In the break distance method, the distance the punch is pushed in is measured and evaluated as the Erichsen value. <Reference Standards> JIS-B7729, (K5400), K5600-5-2, Z2247, ISO-1520, 20482 【Regarding Catalog Download】 Please request the catalog from the related links below or by contacting us. *For products without a standalone catalog, please request the comprehensive catalog.

  • Other measurement, recording and measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Testing Machine