Last Updated： Aggregation Period:Aug 12, 2026～Sep 08, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Aug 12, 2026～Sep 08, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Aug 12, 2026～Sep 08, 2026
This ranking is based on the number of page views on our site.
2461～2490 item / All 3641 items
You can conduct a waterproofness test for rubber and plastic coated fabrics using a simple method.
By applying water pressure from one side of the sample surface and checking for water leakage after a certain period of time, a waterproofness test can be easily conducted.
This is a portable adhesive testing machine that measures the adhesive properties (tack value) of non-sulfurized rubber, adhesive tapes, and the like. It allows for easy measurement of the adhesive strength of materials on-site.
In the molding process of tires and belts, where rubber components and reinforcing materials are adhered together in layers and vulcanized, it is very important to confirm the adhesiveness of the components in advance. This device has been developed as a tool to easily measure the adhesive strength of components on-site and can also be applied to measure the adhesive strength of tapes and similar materials. The ambient temperature at the site changes with the seasons, which also affects adhesiveness. The Tackiness Checker allows for easy measurement of adhesive strength on-site.
![Non-contact hardening evaluation device Cure Tester 'DH-1' [Testable]](https://image.mono.ipros.com/public/product/image/4ab/2000265301/IPROS43207030295884376320.jpeg?w=280&h=280)
Using digital holography, we have achieved measurement and visualization of 3D objects! It is possible to manage the drying state in seconds.
This product applies digital holography technology to non-contact and quantitative evaluation of the drying and curing processes of paints and adhesives, visualizing the drying distribution. By understanding the drying process, it enables the optimization of manufacturing lines and allows for the calculation of the necessary amount of paint and the setting of drying times based on the desired painting conditions. Furthermore, it is expected to be applicable to the evaluation of the curing process of light-curable adhesives and the drying and curing analysis of ink dots, contributing to printable electronics.
It is a testing machine (friction coefficient measuring device) that measures the static friction coefficient (μS) of materials such as plastic films, paper, and textile products using the inclined plane method.
● It has a compact space-saving design. ● It features a liquid crystal touch panel, making operations such as setting test conditions and displaying test results easy. ● Test results can be imported to a PC* (optional).
It is a specialized machine for conducting tensile and compression tests on various materials under temperature conditions. Compared to a standard universal testing machine equipped with a constant temperature chamber, it can secure a longer stroke.
● A crosshead stroke of 900mm is secured within the constant temperature chamber. ● By adopting a double-door design, temperature changes during the loading and unloading of test specimens can be minimized. (Note: If equipped with a standard line elongation gauge, only a single door will be used.) ● A 4-station (4-piece) option is also available.
This is a device that performs the mixing of pigments and vehicles under specific conditions during the paint or ink formulation stage of testing.
When converting pigments into paints or inks, a vehicle (dispersing agent) is added and ground in, but there are various methods for this process. This machine is specifically designed for testing based on JIS K 5101, where a small amount of pigment and vehicle is placed between two glass plates and rotated while applying pressure with a weight to mix them. Therefore, the setting of test conditions such as load and rotation speed can be easily adjusted according to the type of sample.
Device for evaluating the flexibility of rubber materials at low temperatures based on JIS K 6261-3 "Low Temperature Torsion Test" (Geman Torsion Tester, Cold Resistance Tester)
● The installation work of the test specimen can be performed efficiently. ● By using a pulse motor for the twisting operation, excitation locking is possible, making wire attachment easy. ● There is a lateral movement function for the test section, making maintenance of the cooling tank easy. ● Easy operation with a liquid crystal touch panel. ● After the test is completed, measurement data can be output to an Excel worksheet. (PC and Excel are optional) ● Reference standards: JIS K6261-3, ISO 1432
This is a fully automated MFR/MVR measuring device (fully automatic melt indexer, MI meter, melt flow tester) where sample input, measurement, and cleaning are completely automated.
● Fully automated from sample input to cleaning. Contributes to labor-saving, efficiency improvement, and reproducibility enhancement in measurement tasks. ● Continuous testing of 10 sample cups (optional 40 cups) is possible. ● Compact and space-saving desktop model (height 1060mm). ● A wide range of options available (automatic measurement by method A, dry air drying unit, load change mechanism, etc.).
This is a melt indexer capable of multi-weight measurement as specified by ASTM D1238 Method D, in addition to standard single weight measurement.
【Features】 ■ A load range of 0.325kg to 21.6kg is pre-installed in the device. By automatically selecting the weight, the operator's burden is reduced, and the safety of the operation is improved. ■ Up to three-step load increments and decrements (multi-weight measurement) can be performed automatically in a single test. This allows for the determination of the flow rate ratio (FRR), which is commonly used as an indicator of how the rheological properties of thermoplastic materials are affected by the molecular weight distribution. (ASTM D1238 Method D) ■ It can also be used as a standard single-weight measurement melt indexer (MFR/MVR measurement device, MFR meter, MI meter, melt flow rate testing machine).
This is a testing machine that conducts bending tests on FFC (Flexible Flat Cable), FPC (Flexible Printed Circuit Board), etc., to evaluate durability.
● It has a compact design for tabletop use. ● It is ideal for evaluation against strict requirements for bend resistance and heat resistance. ● It is possible to manufacture jigs tailored to sample size and testing methods.
Eliminate labor shortages with the automation of measurement!
Toyo Seiki Seisakusho Co., Ltd. has been working on the full automation of material testing machines since the 1970s. Today, we offer a wide range of fully automated measurement models for tensile testing of plastics and rubber materials, melt flow rate (MFR/MVR) measurement, heat deflection temperature (HDT/DTUL) measurement, rubber vulcanization testing, density and specific gravity measurement, among others, which are utilized by customers in quality control, particularly in the materials and automotive sectors. Please make use of Toyo Seiki Seisakusho's fully automated material testing machines, which contribute not only to labor-saving and efficiency in measurement tasks but also to the improvement of reproducibility and safety of measurement results.
Puncture impact test for rigid plastics (instrumented impact test) | Reference standards: JIS K 7211-2, ISO 6603-2
This is an impact testing machine that simultaneously measures the force and displacement of impact destruction, allowing for the evaluation of the impact fracture characteristics of plate-like materials such as rigid plastics by measuring maximum impact force, displacement at maximum impact force, energy at maximum impact force, and puncture energy.
Acoustic material testing is conducted to measure the acoustic properties of materials.
As noise control issues and sound quality have become important aspects of product design, acoustic material testing has become increasingly relevant for engineers, designers, and manufacturers across various industries. Acoustic material testing is conducted to measure the acoustic properties of materials (such as absorption coefficient, reflection coefficient, impedance, and admittance). There are various methods for measuring the acoustic properties of materials. It is necessary to place the material in a known sound field and measure the impact of the material on that sound field. There are a series of standards (such as JIS A1405-2 (ISO 10534-2), ASTM E1050-08, ASTM E2611-09, etc.) that clearly define special equipment to ensure acoustic conditions, accuracy, and reproducibility for material testing. For more details, please contact us.
It is possible to measure impact input on small to medium-sized structures and to measure the frequency response function through impact excitation.
This impact hammer series is designed for excitation of small to medium structures, such as engine blocks, vehicle frames, and automotive components. Acceleration pickups (or laser velocimeters, etc.) are used to measure the response to excitation. A multi-channel FFT analyzer, such as the PULSE(TM) system, can be used to obtain the frequency response function and mode shapes of the test object. Unlike electrodynamic exciters, impact hammers do not add mass to the test object and are also portable. ● For more details, please download the catalog or contact us.
You can test the loss of transparency, liquid phase temperature, and more!
This device is used to test the glass's devitrification (crystallization) properties. A platinum sample plate with holes is placed in a nearly linear temperature gradient furnace, and glass particles of approximately 20 mesh are arranged, allowing for the testing of devitrification areas, liquid phase temperatures, etc., after being heated for a certain period of time.
Commissioned to conduct salt spray combined cycle tests in accordance with JASO M609, M610, JIS XZ2371, and RTCA/DO-160G!
We offer accelerated corrosion testing that implements salt spray, drying, and wetting cycles, as well as salt spray composite cycle testing. ■ Main applicable standards - JASO M609 (Corrosion testing methods for automotive materials) - JASO M610 (Corrosion testing methods for the appearance of automotive parts) - JIS XZ2371 (Japanese Industrial Standards) - RTCA/DO-160G (Radio Technical Commission for Aeronautics) In addition to conducting salt spray composite cycle testing, we also accept corrosion analysis and failure cause investigation for electronic components and more.
We offer high acceleration life testing (HAST testing, PCT testing)!
The Pressure Cooker Test device can increase the pressure within the test chamber by recreating a water vapor atmosphere under temperature conditions exceeding 100 °C. This test is also known as HAST (High Accelerated Stress Test) and can promote moisture ingress into the sample, allowing for accelerated life evaluation of humidity resistance testing. It also supports the Air-HAST test, which is conducted with residual oxygen in the chamber. ■ Main applicable standards - IEC60068-2-66 (High Temperature High Humidity, Unsaturated Pressurized Water Vapor) - EIAJED4701 (Unsaturated Vapor Pressurized Test) - EIA/JESD22-A110-A (HAST)
It is possible to shorten time and achieve high-precision sorting!
This machine uses a translational rotational motion in a figure-eight pattern on the bottom surface to disperse powder samples evenly across the entire sieve mesh while rotating, resulting in good particle distribution. At the same time, a lateral tapping force is applied to the test sieves on each level, accelerating the sieving process. Efficient sieving allows for reduced time and high-precision separation. ● For more details, please download the catalog or contact us.
An electric sieve shaker that efficiently separates powdered samples of various sizes.
The "TSK B-1" is an electric sieve shaker that incorporates lateral tapping force (horizontal tap) into the shaking motion. It provides vibration (circular motion) to the entire test sieve while also delivering direct impact to the sieve mesh of each layer through a combined motion with the lateral tapping, allowing for efficient separation of powdered samples in each layer of the sieve. Additionally, we offer the "TSK B8-1," which enables efficient separation through a combination of figure-eight translational rotational motion and lateral tapping effects. 【Features】 ■ Combined motion of vibration and lateral tapping (lateral tapping) ■ Efficient separation ■ Adjustable strength of vibration and tapping force ■ Space-saving ■ Operates with low noise For more details, please refer to the catalog or feel free to contact us.
Various commands that will satisfy engineers are prepared! High-speed and highly reliable testing equipment for HDDs/SSDs.
The "HDD/SSD Tester D020" is a compact and lightweight high-speed, high-reliability testing device for 2.5-inch and 3.5-inch HDDs/SSDs, designed for portability. It enhances the efficiency of tasks such as evaluation and selection of HDDs/SSDs, as well as troubleshooting, while reducing work time and improving the quality traceability of drives. Thanks to its user-friendly, unique HDD/SSD handling mechanism, anyone can easily insert and remove HDDs/SSDs with a single touch, without making mistakes. 【Features】 - User-friendly, unique HDD/SSD handling mechanism - Compatibility with various HDD/SSD interfaces - Evaluation and durability testing in a stable operating environment - A variety of commands that will satisfy technicians - Logging/reporting functions that enhance quality traceability *For more details, please refer to the PDF document or feel free to contact us.
Test device that uses a 4-digit LED display!
The "DMC-25A" is a protective relay testing device that features a 4-digit LED display, maintains a wide range of time measurement with automatic digit advancement, and is compact, lightweight, easy to read, and user-friendly. It is equipped with three measurement functions: interval, train, and one-shot. The input signals for start and stop can respond to the application or removal of AC or DC voltage, and the contacts automatically correspond to make or break signals, making it convenient for measuring the operation and recovery time of various protective relays and electromagnetic contactors. Additionally, a noise mask circuit is employed on the stop side, allowing for the removal of noise for a few milliseconds on the stop side simultaneously with the start signal. 【Features】 ■ 4-digit LED display ■ Compact and lightweight ■ Noise mask circuit *For more details, please refer to the catalog or feel free to contact us.
It is a test device that combines a transformer and an operation panel!
The "IP-11K75M" is an AC withstand voltage testing device that integrates a transformer and control panel into one unit, necessary for conducting AC withstand voltage tests. It allows for the connection of an external high-voltage reactor (optional) to increase capacity. Additionally, it comes with terminals that can be connected to external ammeters and voltmeters. 【Features】 ■ Transformer and control panel integrated into one unit ■ Connection of high-voltage reactor (optional) available ■ Capacity increase possible *For more details, please refer to the catalog or feel free to contact us.
It adopts an oil-injection system and boasts high safety!
The "High Voltage Reactor (L Series)" is an AC withstand voltage testing device. By combining it with a withstand voltage transformer, it is possible to enhance the withstand voltage capacity using the reactor for power factor improvement during withstand voltage testing. It is safe as it adopts an oil-filled design. Additionally, we offer a wide range of options to choose from according to your needs. Please feel free to consult us. 【Features】 ■ For power factor improvement during withstand voltage testing ■ Can be combined with a withstand voltage transformer ■ Adopts an oil-filled design *For more details, please refer to the catalog or feel free to contact us.
This product is adjustable up to 10,000V!
The "3124" is a direct current withstand voltage testing device that adopts a variable rated measurement voltage method. It can be set to any output voltage within the range of 1kV to 10kV. Additionally, it is equipped with an auto-discharge function, allowing for the automatic discharge of the charge stored in the circuit simultaneously with the completion of the measurement. The high-voltage insulation resistance scale is dual, and it is automatically switched by the internal circuit, making it easy to read. 【Features】 ■ Adopts a variable rated measurement voltage method ■ Equipped with an auto-discharge function ■ Dual scale *For more details, please refer to the catalog or feel free to contact us.
Introducing our various products for the increasingly diverse electrical equipment!
Our company has been manufacturing and selling user-friendly testing devices, measuring instruments, and maintenance management equipment for the maintenance and management of electrical equipment since its establishment. To respond to the increasingly diverse electrical equipment, new product development is being carried out daily, and we have assembled a wide range of products. This catalog introduces various electrical equipment devices from our company. [Contents] ■ Protection relay testing devices ■ Stabilized power supply units ■ AC withstand voltage testing devices ■ High-voltage insulation resistance testers ■ DC withstand voltage testing devices *For more details, please refer to the PDF materials or feel free to contact us.
Abundant auxiliary power! The color coding of the output terminals and cables makes work easier.
The "OCR-25CVKT" is a compact multifunctional OCR tester with a terminal type, allowing for flexible selection of test codes. With a rich auxiliary power supply (AC100V, DC110/48/24V selectable), it enables AC withstand voltage testing by connecting a withstand voltage transformer. The color coding of output terminals and cables makes work easier. 【Features】 ■ Flexible selection of test codes due to terminal type ■ Abundant auxiliary power supply (AC100V, DC110/48/24V selectable) ■ AC withstand voltage testing possible by connecting a withstand voltage transformer ■ Easier operation due to color coding of output terminals and cables *For more details, please refer to the PDF document or feel free to contact us.
You can check the pressing force in real-time! A realistic and graphical key press testing machine.
This product is a durability testing machine that can measure the original performance of the product through consistent and stable pressing, with a maximum of 10 million continuous operations. We offer a lineup including the "KS-T200-R1" with a pressing force of 1.0N to 2.5N, the "KS-T200-R2" with 2.5N to 5.0N, and the "KS-T200-R3" with 4.8N to 9.8N. The monitoring function with graph display allows for real-time confirmation of the pressing force. 【Features】 ■ Consistent and stable pressing ■ Maximum of 10 million continuous operations ■ Ability to measure the original performance of the product ■ Monitoring function with graph display ■ Real-time confirmation of pressing force *For more details, please refer to the PDF document or feel free to contact us.
