Tips Product List and Ranking from 189 Manufacturers, Suppliers and Companies

【DDK：27FXV-RSM1-GAN-TFLFSN】

【Support for Procurement of Electronic Components】We support the urgent procurement of discontinued (EOL) and hard-to-obtain electronic components and semiconductors! We have established a thorough inspection system.

Are you looking for this model number product? ■Manufacturer: DDK ■Model number: 27FXV-RSM1-GAN-TFLFSN Owen Corporation swiftly procures electronic components that have become difficult to obtain due to production discontinuation or delivery issues from a global network. We will definitely issue a quotation, so you can confirm the details before placing an order, ensuring peace of mind. Veteran inspectors who have monitored market distribution inventory for over 20 years conduct inspections, and only approved products are shipped. All delivered items come with an inspection report. 【Our Inspection System】 ■X-ray Inspection Non-destructive testing to check internal structures and detect counterfeit or inferior products. ■Microscope Careful examination of lead bending and any discrepancies in printed fonts. ■Digital Caliper Dimension measurements in 0.01mm increments to detect cleverly crafted counterfeits. ■Curve Tracer Displays the voltage and current characteristic waveforms between terminals on the screen to detect defective products. ★Please visit our website from the link below. ★You can view our company brochure from the download button below. ▼For other model numbers you can inquire about, please refer to the lineup below.

Company：オーエン
Price：Other

others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

【FTDI：FT232RNL】

【Support for Electronic Component Procurement】 We support the urgent procurement of discontinued products (EOL products) and hard-to-obtain electronic components and semiconductors! We have established a thorough inspection system.

Are you looking for this model number product? ■Manufacturer: FTDI ■Model number: FT232RNL Owen Corporation quickly procures electronic components that have become difficult to obtain due to production discontinuation or delivery issues from a global network. We will issue a quotation, so you can confirm the details before placing an order, ensuring peace of mind. A veteran inspector who has monitored market distribution inventory for over 20 years conducts inspections, and only approved products are shipped. All delivered items include an inspection report. 【Our Inspection System】 ■X-ray Inspection Non-destructive testing to check internal structures and detect counterfeit or inferior products. ■Microscope Carefully checks for lead bending and any discrepancies in printed fonts. ■Digital Caliper Measures dimensions with an accuracy of 0.01 mm to detect cleverly crafted counterfeits. ■Curve Tracer Displays the voltage and current characteristic waveforms between terminals on the screen to detect defective products. ★Please visit our website from the link below. ★You can view our company brochure from the download button below. ▼For other model numbers you can inquire about, please refer to the lineup below.

Company：オーエン
Price：Other

others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

【MICROCHIP：USB84604AF-B-001080】

[Support for Electronic Component Procurement] We support the urgent procurement of discontinued products (EOL products) and hard-to-obtain electronic components and semiconductors! We have established a thorough inspection system.

Are you looking for this model number product? ■Manufacturer: MICROCHIP ■Model Number: USB84604AF-B-001080 Owen Corporation swiftly procures electronic components that have become difficult to obtain due to production discontinuation or delivery issues from a global network. We will definitely issue a quotation, so you can confirm the details before placing an order, ensuring peace of mind. Our veteran inspectors, who have been monitoring market distribution inventory for over 20 years, conduct inspections and only ship products that pass. All deliveries include an inspection report. 【Our Inspection System】 ■X-ray Inspection Non-destructive testing to check internal structures and detect counterfeit or inferior products. ■Microscope Carefully checks for lead bending and any discrepancies in printed fonts. ■Digital Caliper Measures dimensions with an accuracy of 0.01mm to detect cleverly crafted counterfeits. ■Curve Tracer Displays the voltage and current characteristic waveforms between terminals on the screen to detect defective products. ★Please visit our website from the link below. ★You can view our company brochure from the download button below. ▼For other model numbers you can inquire about, please refer to the lineup below.

Company：オーエン
Price：Other

others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Therson's low retention chip

Low-retention polypropylene tips with molecular-level low-retention surface treatment, no residual liquid after dispensing, compliant with USP Class VI standards.

Thomson's pipette tips are high-quality pipette tips manufactured using precision molding technology, produced from pure and unadulterated plastic resin material without the use of any additives or plasticizers. It is a research-oriented plastic product brand that excels in cost performance, contributing not only to quality but also to cost efficiency. - It features a molecular-level low-retention surface treatment, ensuring excellent liquid release and is unaffected by radiation sterilization or autoclaving. - It is very useful for sensitive PCR and real-time PCR applications. - Made from virgin PP that is free of oleamide and DiHEMDA. - No lubricants, dyes, plasticizers, release agents, heavy metals, or coatings are used during manufacturing. - DNase, RNase, and pyrogen-free. - Produced in a sterile cleanroom using an automated system that eliminates human contact. - Autoclavable. - Low-retention tips of various sizes are available in bags (bulk) and racks. - Refill options for racks are also available. - Sterilized types of low-retention tips are available in both rack and refill options. - Usage examples: reagents, chemicals, test solutions, culture media, supplements, factory wastewater, water quality samples, waste liquids, and more.

Company：TOEI KAISHA, LTD.
Price：Other

Plastic utensils and containers
Other laboratory equipment and containers

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

ED1512884 N151.23004E

Sandvik SV N151.23004E T-Max Q-Cut Cutting and Grooving Insert 525 N15123004E 609-8827

Company：イーデンキ
Price：10,000 yen-100,000 yen

Other work tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Contract processing of medical device parts (ISO 13485 - Medical Device Manufacturing Certification)

Equipped with a clean room (Class 10,000)! We provide integrated services for the development, prototyping, and contract manufacturing of pharmaceutical and healthcare products (ISO 13485 certified).

At Richel Co., Ltd., we offer contract manufacturing services for pharmaceutical components, including our "Contract Manufacturing Service for Resin Microchips," which is active in the bioscience field. In particular, for "Resin Microchips," we use original resin materials made from polypropylene-based and elastomer-based resins, enabling processing in the micro-order range of 0.3 to 100 μm. Furthermore, we achieve uniform channel depths and support mass production through injection molding, allowing for low-cost production. We also welcome inquiries for small quantities, such as development prototypes. [ISO 13485, Medical Device Manufacturing Certification] We maintain strict quality control in our factory equipped with a clean room (Class 10,000). *For more details, please refer to our materials. Feel free to contact us with any inquiries.

Company：リッチェル
Price：Other

Contract manufacturing

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Throwaway chip

We will carry out additional processing for standard chips and manufacture custom products from scratch! We select materials suitable for the processing work and respond with small lot production and short delivery times.

For cutting tools and indexable tips (throwaway tips), leave it to NTC! From the production of special shapes and custom tips to consultations on chipping, abnormal wear countermeasures, and extending tool life, we provide proposals that you will find "cheap and very affordable." Not only can we create custom tips, but we also accept shape and coating changes (PVD coating) for off-the-shelf products in small quantities. If you have any issues with cutting tools like lathes or cutters, please feel free to consult us. Additionally, we offer a wide range of "beneficial" proposals, including cost reduction through the regrinding and reuse of used new TA tips and the purchase (recycling) of used tools. Material compatibility range: carbide (tungsten), cermet, sintered diamond (PCD), cBN Cutting tool shape compatibility range: ground shaped tips, drills, end mills, reamers, brazing tools *For details, please contact us or refer to our catalog.

Company：日研ツール大阪営業所
Price：Other

Other cutting tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Cutting insert

We will carry out additional processing for standard chips and manufacture custom products from scratch! We will select materials suitable for the processing work and respond with small lot production and short delivery times.

For cutting tools and indexable tips (throwaway tips), leave it to NTC! From the production of special shapes and custom tips to consultations on chipping, abnormal wear prevention, and extending tool life, we offer proposals that you will find "cheap and very affordable." Not only can we create custom tips, but we also accept small lot orders for shape changes and coating changes (PVD coating) for ready-made products. If you have any issues with cutting tools like lathes or cutters, please feel free to consult us. Additionally, we provide a wide range of "beneficial" proposals, including cost reduction through the regrinding and reuse of used new TA tips, as well as the purchase (recycling) of used tools. Material compatibility: carbide (tungsten), cermet, sintered diamond (PCD), cBN Tool shape compatibility: ground shaped tips, drills, end mills, reamers, brazing tools *For more details, please contact us or refer to our catalog.

Company：日研ツール大阪営業所
Price：Other

Other cutting tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Special type chip

We will carry out additional processing for standard chips and manufacture custom products from scratch! We will select materials suitable for the processing work and respond with small lot production and short delivery times.

For cutting tools and indexable tips (throwaway tips), leave it to NTC! From the production of special shapes and custom tips to consultations on chipping, abnormal wear prevention, and extending tool life, we will provide proposals that you will find "cheap and very affordable." Not only can we create custom-made tips, but we also accept shape and coating changes (PVD coating) for standard products in small quantities. If you have any issues with cutting tools such as lathes or cutters, please feel free to consult us. Additionally, we offer a wide range of "beneficial" proposals, including cost reduction through the regrinding and reuse of used new TA tips and the purchase (recycling) of used tools. Material compatibility range: carbide (tungsten), cermet, sintered diamond (PCD), cBN Cutting tool shape compatibility range: ground shaped tips, drills, end mills, reamers, brazing tools *For details, please contact us or refer to our catalog.

Company：日研ツール大阪営業所
Price：Other

Other cutting tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Custom-made item tip

We will carry out additional processing for standard chips and manufacture custom products from scratch! We will select materials suitable for the processing work and respond with small lot production and short delivery times.

For cutting tools and indexable tips (throwaway tips), leave it to NTC! From the production of special shapes and custom tips to consultations on chipping, abnormal wear countermeasures, and extending tool life, we will provide proposals that you will feel are "cheap" or "incredibly cheap." Not only can we create custom tips, but we also accept shape changes and coating changes (PVD coating) for off-the-shelf products in small quantities. If you have any issues with cutting tools such as blades or cutters, please feel free to consult us. Additionally, we offer a wide range of "beneficial" proposals, including cost reduction through the regrinding and reuse of used new TA tips, as well as the purchase (recycling) of used tools. Material compatibility range: carbide (tungsten), cermet, sintered diamond (PCD), cBN Cutting tool shape compatibility range: ground shaped tips, drills, end mills, reamers, brazing tools *For details, please contact us or refer to our catalog.

Company：日研ツール大阪営業所
Price：Other

Other cutting tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Lumileds LUXEON T LED chip Lumileds

3.7×3.7×2.0 High Power High Output LED White 143lm/W@350mA 5000K Philips

Philips Lumileds LUXEON T Features • Compact 3737 package • Standard 2.7Vf and 3K/W thermal resistance • Hot tested at Tj = 85°C • Freedom From Binning - 3 and 5 SDCM • Exceeds ENERGY STAR lumen maintenance requirements • Optimized for very high efficiency • Excellent color saturation • Proven reliability ● For more details, please contact us or download the catalog.

Company：ブライト東京支店
Price：Less than 10,000 yen

LED lighting

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Microfluidic reactor chip, microchip immunoassay

This is a microchip for immunoassays that suppresses nonspecific adsorption of proteins.

Biocosm Co., Ltd. manufactures chips of various shapes and surface-treated chips on a contract basis. Additionally, we accept joint research and contract development, leveraging our extensive knowledge and experience. The microchip immunoassay can be used as a microchip for immunoassays by coating the inner walls of PDMS microchannels with MPC polymer, which suppresses non-specific adsorption of proteins. 【Features】 ○ Microchip immunoassay ○ Coating of PDMS microchannel inner walls with MPC polymer ○ Suppression of non-specific protein adsorption ○ Usable as a microchip for immunoassays For more details, please contact us.

Company：Biocosm
Price：Other

Other purification and extraction
Other purification and extraction

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Microfluidic reactor chip, electrophoresis chip

The inner walls of the PDMS microchannel are modified with phospholipid polymers.

Biocosm Co., Ltd. manufactures chips of various shapes and surface-treated chips on a contract basis. Additionally, we accept collaborative research and contract development by leveraging our extensive knowledge and experience. Electrophoresis chips can be used as microfluidic chips for electrophoresis by modifying the inner walls of PDMS microchannels with phospholipid polymers to suppress non-specific adsorption of proteins. 【Features】 ○ Electrophoresis chips ○ Inner walls of PDMS microchannels modified with phospholipid polymers ○ Suppression of non-specific protein adsorption ○ Usable as microfluidic chips for electrophoresis For more details, please contact us.

Company：Biocosm
Price：Other

Other purification and extraction
Other purification and extraction

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High hardness steel turning insert "Bertio" triangular for end face and outer diameter machining.

Suitable for hardened steel with HRC61 or higher! Achieved improved finishing accuracy and wear resistance through sharp cutting performance. Triangle end face and outer diameter processing (TNGA160402).

Our high-hardness steel turning and high steel cutting insert chip "Bertio" is suitable for hardened steel with HRC61 or higher. Utilizing the characteristics of high hardness/high toughness carbide "HRA95.0," it features a sharp edge design. This achieves improved finishing accuracy and wear resistance due to its sharp cutting ability. Unlike cBN inserts that require high rotation, it can be used with general-purpose equipment. Additionally, compared to conventional tools, its lifespan is improved, and cost-effectiveness is further expected. 【Features】 ■ Suitable for hardened steel with HRC61 or higher ■ Edge shape with sharp edges ■ Achieves improved finishing accuracy and wear resistance due to sharp cutting ability ■ Can be used with general-purpose equipment compared to cBN inserts that require high rotation ■ Improved lifespan compared to conventional tools, resulting in great cost-effectiveness *For more details, please refer to the PDF document or feel free to contact us.

Company：片桐製作所
Price：Other

lathe
Grinding Machine
Other cutting tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High hardness steel turning insert "Bertio" diamond shape 55℃ for internal diameter machining

Suitable for hardened steel with HRC61 or higher! Achieved improved finishing accuracy and wear resistance through sharp cutting performance. Diamond shape 55℃ internal diameter processing (DCGW070202).

Our high-hardness steel turning and high steel material cutting insert chip "Bertio" is suitable for hardened steel with a hardness of HRC61 or higher. Utilizing the properties of high hardness/high toughness carbide "HRA95.0," it features a sharp edge design. This achieves improved finishing accuracy and wear resistance due to its sharp cutting performance. Unlike cBN inserts that require high rotation, it can be used with general-purpose equipment. Additionally, compared to conventional tools, its lifespan is improved, and cost-effectiveness is further expected. 【Features】 ■ Suitable for hardened steel with HRC61 or higher ■ Edge shape with a sharp edge ■ Achieves improved finishing accuracy and wear resistance due to sharp cutting performance ■ Can be used with general-purpose equipment compared to cBN inserts that require high rotation ■ Improved lifespan compared to conventional tools, offering great cost-effectiveness *For more details, please refer to the PDF document or feel free to contact us.

Company：片桐製作所
Price：Other

lathe
Grinding Machine
Other cutting tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Tips Product List and Ranking from 189 Manufacturers, Suppliers and Companies

Tips Manufacturer, Suppliers and Company Rankings

Tips Product ranking