We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Transceiver.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Transceiver Product List and Ranking from 141 Manufacturers, Suppliers and Companies | IPROS GMS

Last Updated： Aggregation Period:Mar 18, 2026～Apr 14, 2026
This ranking is based on the number of page views on our site.

Transceiver Manufacturer, Suppliers and Company Rankings

Last Updated： Aggregation Period:Mar 18, 2026～Apr 14, 2026
This ranking is based on the number of page views on our site.

  1. エクセリ Tokyo//IT/Telecommunications
  2. STJグループ（株式会社サンテレコムジャパン、株式会社STJレンテック） Tokyo//Trading company/Wholesale
  3. ウェッジ Kyoto//IT/Telecommunications
  4. 4 ファルタ・マイクロバッテリー・ジャパン Tokyo//Testing, Analysis and Measurement
  5. 5 システム情報企画 Tokyo//Consumer Electronics
Go to Company Ranking

Transceiver Product ranking

Last Updated： Aggregation Period:Mar 18, 2026～Apr 14, 2026
This ranking is based on the number of page views on our site.

  1. Introduction to the very famous battery manufacturer in Europe, VARTA. ファルタ・マイクロバッテリー・ジャパン
  2. Ultra-compact silicon photonics transceiver "IOCore" AIO Core Co., Ltd.
  3. Tourist Bus Simple Wireless Microphone Converter Device 'SRX-600' Okayo Japan株式会社(オカヨジャパン) 東京本社
  4. 4 Bone conduction headset "HG70" テムコジャパン
  5. 5 Next-generation transceiver "BONX WORK"

Transceiver Product List

601～630 item / All 941 items

Displayed results
"Perfect for use in noisy environments" Earphone Microphone AUR-IC10

"Perfect for use in noisy environments" Earphone Microphone AUR-IC10

A headset microphone suitable for use in noisy environments as it effectively captures only sound, and allows for simultaneous call mode.

The AUR-IC10 (AURIC10) is a PTT switch + earphone microphone set from S.O.W. Co., Ltd., under the AURO brand. This earphone microphone is compatible with Icom 2-pin type IP radios, WLAN transceivers, and specific low-power transceivers through its accessory connection connector. It can be used in simultaneous communication mode, where it is worn on both ears. It is suitable for use in noisy environments, as it seals the ears with special ear pads and picks up the voice inside with the microphone. Unlike bone conduction, it does not pick up noise from the ground. The dedicated ear pads (ear plugs) come in different sizes, and the ear pad portion can be removed and washed. Ear pads and earphone microphones can be purchased separately. For extremely low-priced sales of earphone microphones, batteries, and more, please leave it to Excelli. *For more details, feel free to contact us.

  • Other network tools
  • Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
"Perfect for use in noisy environments" Earphone Microphone AUR-ST04

"Perfect for use in noisy environments" Earphone Microphone AUR-ST04

A headset microphone suitable for use in noisy environments, designed to effectively capture only sound, and can be used for two-way communication.

The AUR-ST04 (AURST04) is a PTT switch + earphone microphone set from S.O.W. under the AURO brand (STANDARD HORIZON / STANDARD universal type). It is an earphone microphone that can be used with digital simple radios and commercial radios of the universal type for Standard and Standard Horizon. It is designed for duplex communication. It features special ear pads that seal the ears to pick up voices with the microphone, making it suitable for use in noisy environments. Unlike bone conduction, it does not pick up noise from the ground. The dedicated ear pads (earplugs) come in various sizes and can be removed for washing. The ear pads and earphone microphone can be purchased separately. The black button on the PTT switch AUR-ST04PA is the PTT switch, and the gray button is the PTT lock button. For extremely low-priced sales of earphone microphones, batteries, and more, please leave it to Excelli. For more details, feel free to contact us.

  • Other network tools
  • Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Earphone with SK-E59 Earphone Microphone SK-M59

Earphone with SK-E59 Earphone Microphone SK-M59

Earphone microphone for IP radios made by Smart Wave.

The SK-M59 (SKM59) is a tie pin microphone and earphone (detachable) made by Smart Wave Telecommunications. It is an earphone microphone for IP radios made by Smart Wave. You can transmit voice by pressing the PTT button on the side of the microphone. It is an omnidirectional microphone, so it picks up sound from all directions. The microphone part comes with a 360-degree rotating metal tie pin clip, allowing you to attach it to your collar or chest. It includes an earphone with a hook, SK-E59 (2.5φ, approximately 50cm), and the hook is removable. The microphone part has a 2.5φ earphone jack, and the earphone can be detached from the microphone. The radio connection connector is screw-type, so it can be used without coming loose during use. 【Compatible Models】 IP radios and GPS location management systems - SK-5000 For unbeatable prices on earphone microphones and batteries, trust Excelli. For more details, please feel free to contact us.

  • Other network tools
  • Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Headset Microphone SK-M53 for use in combination with IP radios

Headset Microphone SK-M53 for use in combination with IP radios

Earphone microphone compatible for use with Smart Wave's IP radio.

The SK-M53 (SKM53) is a compact tie-pin microphone and earphone manufactured by Smart Wave Telecommunications. It can be used in combination with Smart Wave's IP radios. This is an earphone microphone with an integrated earphone and microphone. You can transmit audio by pressing the PTT button located on the side of the microphone. It comes with a 360-degree rotating tie-pin clip, allowing you to attach it to your collar or chest. The earphone is designed as an ear-hook type, making it difficult to fall out, so it can be used without issues even during active work. The radio connection connector is screw-type, ensuring it stays connected during use. 【Compatible Models】 IP radios, GPS location management systems - SK-5000 For unbeatable prices on earphone microphones and batteries, trust Excely. *For more details, please feel free to contact us.

  • Other network tools
  • Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Long-lasting operation possible - Nickel-metal hydride rechargeable battery FC-BT01

Long-lasting operation possible - Nickel-metal hydride rechargeable battery FC-BT01

Nickel-metal hydride rechargeable battery that can operate the FC-GR13 for about 15 hours and the FC-GT13 for about 24 hours.

●FC-BT01 (FCBT01) is a nickel-metal hydride rechargeable battery manufactured by F.R.C. ●It is a nickel-metal hydride rechargeable battery for the C-band wireless guide system receiver FC-GR13 and transmitter FC-GT13. ●Two batteries are used. They are sold individually. ●With two FC-BT01 nickel-metal hydride rechargeable batteries, you can operate the FC-GR13 for about 15 hours and the FC-GT13 for about 24 hours. ●The battery capacity is 1.2V/2500mAh. ●The charging time is approximately 7.5 hours using the single charger FBC-3R with the charging AC adapter AC-3 or the 20-unit charger (with AC adapter) FBC-20RG. ●It can also be used with the specific low-power transceiver FC-ZXPRO. 【Compatible Models】 ・FC-GR13 ・FC-GT13 For unbeatable prices on earphone microphones and batteries, trust Exceli. *For more details, please feel free to contact us.

  • Other network tools
  • Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Bone conduction Bluetooth wireless headset OpenComm2

Bone conduction Bluetooth wireless headset OpenComm2

Bone conduction wireless headset that can connect to radios, transceivers, intercoms, and smartphones via Bluetooth for voice calls.

●SKZ-EP-000022 (SKZEP000022) is the Shokz OpenComm2 bone conduction Bluetooth wireless headset. ●It can connect to radios, transceivers, intercoms, and smartphones via Bluetooth for voice calls. ●The DSP noise-canceling microphone eliminates background noise, allowing for clear calls. ●The built-in lithium polymer battery provides up to 16 hours of continuous talk time and 8 hours of music playback on a full charge. ●The boom microphone is ON when lowered and OFF when raised. ●It features NFC (Near Field Communication), allowing for easy pairing with compatible devices by simply bringing them close together. Separate pairing settings are required when using with radios, intercoms, or transceivers. ●It is IP55 dustproof and waterproof. The microphone has a waterproof acoustic mesh and includes a mute button. 【Compatible Models】 For more details, please contact us. *While we conduct operational verification in-house, we cannot guarantee operation, so please understand.

  • Other network tools
  • Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Business model bone conduction headset OpenComm2 UC

Business model bone conduction headset OpenComm2 UC

A bone conduction headset that allows for smooth ZOOM meetings and other activities even in noisy environments like construction sites, enabling constant connectivity to devices regardless of location.

● SKZ-EP-000023 (SKZEP000023) / SKZ-EP-000024 (SKZEP000024) are business model bone conduction headsets OpenComm2UC made by Shokz. ● The model numbers differ with the included Bluetooth adapter. ・ SKZ-EP-000023: SKZ-OT-000003 (Type-A) ・ SKZ-EP-000024: SKZ-OT-000002 (Type-C) ● By using the Shokz Loop110 wireless adapter, you can connect to devices anytime and anywhere, regardless of whether it's a Mac or PC. ● The DSP noise-canceling microphone eliminates background noise, allowing for clear calls. ● It is equipped with NFC functionality, allowing for easy pairing by simply bringing it close to compatible devices. If you are using it with radios, intercoms, or transceivers, separate pairing settings are required. The microphone features a waterproof acoustic mesh and a mute button. 【Compatible Models】 For more details, please contact us. *We have conducted operational verification in-house, but please understand that we cannot guarantee operation.

  • Other network tools
  • Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[BCP Measures - Satellite Communication Radio] IC-SAT100 Rental Set

[BCP Measures - Satellite Communication Radio] IC-SAT100 Rental Set

A satellite communication transceiver system that uses satellite communication to ensure stable communication even in mountainous areas and remote islands, covering the entire Earth, including the Arctic and Antarctic.

The rental wireless device IC-SAT100 is a satellite communication transceiver system (Satellite PTT) that does not require a license or qualification for rental. With the push of a button, you can communicate with the entire world simultaneously. Calls are made directly from the wireless device to the communication satellite (Iridium's satellite communication network) and back to the wireless device, without going through a ground station. This system uses a satellite network that covers the entire Earth, including the Arctic and Antarctic, allowing for global wide-area communication across countries. The rental also includes the antenna FA-S102U, belt clip MBB-5, lithium-ion battery pack BP-300, rapid charger BC-241, and AC adapter BC-242 as basic rental components at no additional cost. *Earphone microphone HM-163MC, speaker microphone HM-222, Bluetooth headset VS-3, and bone conduction Bluetooth wireless headset OpenComm (AFT-EP-00026 / AFT-EP-00027 / AFT-EP-00028) are not included. They can be rented as options, so please feel free to request them if needed.

  • Other safety equipment
  • Other network tools
  • Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Expandable communication area Digital specific low power repeater HR658

Expandable communication area Digital specific low power repeater HR658

A compact and robust wireless repeater that doubles the communication area of the PD798Ex and eliminates dead zones.

● HR658 (HR-658) is a digital specific low-power repeater manufactured by Hytera. ● It is a wireless relay device for the specific low-power explosion-proof radio PD798Ex (for PD798EXLDR / PD798EXLADR only). ● By communicating through the digital specific low-power repeater HR658, the communication distance can be doubled (theoretical value). This helps to double the call area and eliminate dead zones. *Note: HR658 does not amplify the radio waves; it retransmits at the same output as HR658. ● It is IP67 dustproof and waterproof. ● It meets the U.S. military MIL-STD-810H standards, ensuring high durability. ● It operates on a household power supply of AC100V. ● To utilize the relay function, it is necessary to add a repeater-compatible license (for a fee) to the existing specific low-power explosion-proof radio PD798Ex. ● HR658 is not intrinsically safe explosion-proof, so it must be installed outside of explosion-proof areas. ● It complies with the technical standards of the Ministry of Internal Affairs and Communications. ● The manufacturer's warranty period is one year. *For more details, please refer to the PDF materials or feel free to contact us.

  • Other network tools
  • Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
GPS device IM-830 that can determine location anywhere in the country

GPS device IM-830 that can determine location anywhere in the country

A small GPS device for the Mobaroque dynamic management system manufactured by Mobile Create, capable of long-term management of GPS locations other than vehicles.

The IM-830 (IM830) is a GPS device manufactured by Mobile Create. It is a compact GPS terminal for the dynamic management system Mobaroke. It does not have the functionality of a voice radio, allowing for a cost-effective installation. The IM-830 can regularly send location information at intervals as short as 1 second, enabling real-time location tracking on a map. It can be powered via USB or a cigarette lighter, eliminating the need for installation in vehicles. It supports a cigarette charger for DC12V / 24V and USB power for DC5V. When used in conjunction with a mobile battery, it can be utilized for extended periods, allowing for long-term management of GPS locations beyond vehicles. It can be used with just one device. For more details, please feel free to contact us.

  • Other network tools
  • Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[For Work Communication] Specific Low Power Transceiver IC-MS5880#11

[For Work Communication] Specific Low Power Transceiver IC-MS5880#11

A simultaneous communication type transceiver that is effective in work sites where precise instructions and timing are crucial, such as crane operations.

The IC-MS5880#11 is a master unit of a simultaneous communication transceiver for work communication manufactured by Icom. It is a specific low-power transceiver. It supports hands-free simultaneous communication and multi-party communication. 1. Maximum simultaneous communication among 9 parties: 2 IC-MS5880 units, 8 IC-5880 units 2. Maximum simultaneous communication among 5 parties: 1 IC-MS5880 unit, 4 IC-5880 units Area expansion is possible. 1. By connecting the line compensator AG-5880 to the IC-MS5880, you can expand the area up to 50m, and by connecting up to 3 AG-5880 units, you can achieve a total area expansion of over 150m, allowing simultaneous communication with IC-5880 units. 2. By connecting the VE-PG4 to the IC-MS5880 and connecting to an IP network, simultaneous communication among IC-5880 units can be achieved between distant buildings. 3. Using the VE-PG4 to connect to an IP phone allows for group calls and simultaneous communication with IC-5880 units from office telephones, reducing the effort for office communication and phone responses. The IC-MS5880 has the following communication modes: 1. Simultaneous communication mode 2. PTT transmission mode 3. Repeater operation mode 4. Transmission prohibition mode 5. Auto channel mode

  • Other safety equipment
  • Other network tools
  • Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[No license or qualifications required] Digital guide system receiver DJ-RX80

[No license or qualifications required] Digital guide system receiver DJ-RX80

A digital guide system receiver that can use 28 channels, ideal for operating multiple groups and scenes such as international conferences.

● The DJ-RX80 (DJRX80) is a digital guide system receiver manufactured by Alinco. ● Please use it in combination with the transmitter DJ-TX80. ● By adopting the 800MHz band radio microphone type B, it achieves high sound quality. ● It has 28 channels, making it easier to operate in multiple groups. The number of channels is more than double that of the 300MHz band type C microphone. The channel matching for numerous subunits can also be easily set using the scan function. ● The rechargeable battery is common with the DJ-TX80, the previous model DJ-TX31, and DJ-RX31. ● It comes with an LCD display, making it easy to check settings. ● It is made of durable polycarbonate. ● You can customize settings such as the type of battery used, operation sounds, and the necessity of display lighting. It can automatically search for the transmitter's signal and will stop automatically when found, allowing for channel settings. *Note: It cannot be used in environments with interference. ● The disconnection detection function displays any abnormalities with the earphones on the screen. ● It is a model that has obtained technical standard conformity certification in accordance with ARIB RCR STD-15. *For more details, please refer to the PDF document or feel free to contact us.

  • Other safety equipment
  • Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[BbTALKIN] CS2 Rental Set

[BbTALKIN] CS2 Rental Set

Rental set of Bluetooth intercom BbTALKIN CS2 that allows hands-free simultaneous calls for up to 6 people.

The 『BbTALKIN CS2』 is a Bluetooth intercom manufactured by ON'S COMPANY. ● It is a Bluetooth intercom that can be easily attached and detached from a helmet with one touch, allowing hands-free simultaneous communication for up to 6 people. ● The communication range varies depending on the location, but it can reach up to 1.6 km (when used with 2 units in an open field). ● It is particularly recommended for situations that require precise timing and rapid communication, such as heavy machinery, bridge construction, civil engineering, surveying, demolition work, construction sites, sewer and plumbing work, electrical and air conditioning work, high-pressure washing, and drones. ● It operates on the 2.4GHz Bluetooth band, so it can be used without affecting medical devices. ● For rentals, we provide a waterproof headset B199110a, waterproof case B199041, clip mount B199055, USB charging cable, and numbering stickers as basic rental components for free. ● When placed in the waterproof case, all components including the speaker, microphone, and main unit are completely waterproof (IPX8) and have excellent dustproof performance (IP6X) (IP68).

  • Other safety equipment
  • Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Mobile station vehicle-mounted antenna HMG-260-09EL

Mobile station vehicle-mounted antenna HMG-260-09EL

A capacity-grounded 3λ/4 whip antenna for use in municipal digital mobile communications and fire emergency digital mobile communications in the 260 MHz band.

The HMG-260-09EL (HMG26009EL) is a high-gain element (MP type) for vehicles manufactured by Nippon Antenna, designed for the 260MHz band. It is an antenna for mobile stations in digital public radio systems, used for municipal digital mobile communications and fire and emergency digital mobile communications. It is a capacitive grounded 3λ/4 whip antenna for the 260MHz band. * A whip antenna is one that has no directivity and can receive and transmit signals from any angle. * It is used in combination with a separately sold base. - When combined with base MG-BA3-MJ-2, it becomes a high-gain magnetic antenna for vehicles in the 260MHz band (5D-2V) HMG-260B-09 F=260-275 (set). - When combined with base MG-BA5-MJ-2, it also becomes a high-gain magnetic antenna for vehicles in the 260MHz band (5D-2V) HMG-260B-09 F=260-275 (set). * The compatible frequency range is 260 to 275MHz. * The connector is MP. * Included accessories: Instruction manual. * For more details, please feel free to contact our company.

  • Other network tools
  • Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Antenna for 150MHz band radio equipment WH-150-3HA-09

Antenna for 150MHz band radio equipment WH-150-3HA-09

Antenna for a 150MHz band radio device with hole-mount installation.

The WH-150-3HA-09 (WH1503HA09) is a rooftop whip antenna (hole-mount type) manufactured by Nippon Antenna for the 150MHz band. It is an antenna for radios operating in the 150MHz band. The element is bent, with a 65-degree angle in the middle of the element. It is a whip antenna that is mounted by drilling a hole, suitable for a vehicle body mounting hole of φ23mm and a mounting plate thickness of 15mm or less. The installation location is on the vehicle's rooftop. *A whip antenna is one that has no directivity and can receive and transmit signals from any angle. It features an NJ connector. It is designed for a specified frequency within the 150MHz range; please specify the center frequency (fo) in MHz when placing your order. This product complies with safety standards. It is made to order; please inquire about the delivery time. Included accessories: one instruction manual. There are also straight NJ connector versions of WH-150-3H-09 with a straight element and WH-150-2H-09 with an L-shaped NJ connector. *For more details, please feel free to contact us.

  • Other network tools
  • Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Antenna for 150MHz band radio equipment WH-150-3H-09

Antenna for 150MHz band radio equipment WH-150-3H-09

Antenna for a 150MHz band radio device with hole-mounting installation.

The WH-150-3H-09 (WH1503H09) is a whip antenna (hole-mount type) for rooftop use in the 150MHz band, manufactured by Nippon Antenna. It is an antenna for radios operating in the 150MHz band. This is a whip antenna that is mounted by drilling a hole. The mounting hole on the vehicle is φ23mm, and the thickness of the mounting plate is 15mm or less. The installation location is the car's rooftop. * A whip antenna is one that has no directionality and can receive and transmit signals from any angle. It uses an NJ connector. It is for a specified frequency within the 150MHz band. Please specify the fo (center frequency) in MHz when placing your order. This product complies with safety standards. It is made to order. Please inquire about the delivery time. Included: One instruction manual. There are also models available with a straight NJ connector bent at a 60-degree angle (WH-150-3HA-09) and an L-shaped NJ connector (WH-150-2H-09). * For more details, please feel free to contact us.

  • Other network tools
  • Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Designated frequency in the 150MHz band] HGW-150-1PN-09

[Designated frequency in the 150MHz band] HGW-150-1PN-09

150MHz band λ/2 non-radial type antenna with N-P type connector specifications

●HGW-150-1PN-09 (HGW1501PN09) is a 150MHz 1/2λ element (NP type) manufactured by Nippon Antenna. ●It is a λ/2 non-radial type antenna for radio equipment in the 150MHz band. ●Please use it in combination with the separately sold NJ type base for installation. ●Since it is a specified frequency in the 150MHz band, please specify the fo (center frequency) MHz when placing an order. ●The model number changes based on the frequency. - HGW-150-1PN-09 140-143: Frequency 140-143MHz - HGW-150-1PN-09 143-146: Frequency 143-146MHz - HGW-150-1PN-09 146-150: Frequency 146-150MHz - HGW-150-1PN-09 150-155: Frequency 150-155MHz - HGW-150-1PN-09 155-160: Frequency 155-160MHz - HGW-150-1PN-09 160-165: Frequency 160-165MHz - HGW-150-1PN-09 165-170: Frequency 165-170MHz *For more details, please feel free to contact us.

  • Other network tools
  • Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Designated frequency in the 150 MHz band: HGB-150-2-09EL

Designated frequency in the 150 MHz band: HGB-150-2-09EL

Garter-mounted 150MHz band vehicle high-gain element.

The HGB-150-2-09EL is a 150MHz band vehicle-mounted high-gain element (MP type) manufactured by Japan Antenna. It is an antenna for vehicle-mounted radios. It is an element of a 150MHz band 5λ/8 whip antenna with a garter mount. Since the HGB-150-2-09EL is a specified frequency in the 150MHz band, please specify the fo (center frequency) in MHz when placing your order. Due to the fixed frequency of the HGB-150-2-09EL, there are also products with the following model numbers. These are not made to order. - HGB-150-2-09EL 150-153: Frequency 150-153MHz - HGB-150-2-09EL 153-156: Frequency 153-156MHz - HGB-150-2-09EL 156-160: Frequency 156-160MHz There are also sets available, such as HGB-150-2A-09, which includes the HGB-150-2-09EL and RSB-BA3-MJ, and HGB-150-2B-09, which includes the HGB-150-2-09EL and RSB-BA5-MJ. *For more details, please feel free to contact us.

  • Other network tools
  • Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[No license or qualifications required] Wideband handheld receiver IC-R15

[No license or qualifications required] Wideband handheld receiver IC-R15

A wideband handheld receiver that does not require a license or qualifications, is highly versatile, and can be easily used by beginners.

● The IC-R15 is a wideband handheld receiver made by Icom. ● It covers a wide frequency range from 108 to 500 MHz. ● It features an easy mode for beginners, allowing users to simply select registered reception targets categorized in advance to listen. Additionally, it has a favorites function that enables quicker selection of frequently listened memory channels. ● It can receive and record two signals simultaneously, allowing for the collection of more information. ● Recorded audio can be saved as WAV files on a microSD card, enabling data playback at any time without the worry of missing anything. Furthermore, it can record while audio is being played back, and information such as frequency, mode, S-meter, and time (user-set) can also be recorded along with the audio. ● It is equipped with Bluetooth functionality, allowing the use of devices like VS-3 and S9 IJKP. ● The scan speed is approximately 150 channels per second (in VFO mode). *For more details, please refer to the PDF document or feel free to contact us.*

  • Other safety equipment
  • Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
【免許・資格不要】SRFD51 / SRFD51-L

【免許・資格不要】SRFD51 / SRFD51-L

軽量かつ混信の多い繫華街のような場所でも安心して使用できる大型アクセスキーモデルの特定小電力トランシーバー

●SRFD51 / SRFD51-Lは八重洲無線製の特定小電力トランシーバーです。 ●「いつもつながる、だから安心」が実現する八重洲無線のSTRオンデマンドインカムです。 ●STRオンデマンドシリーズならではのデュアルチャンネル受信が可能です。2つのチャンネルを使った同時受信方式を活用し、リーダーが異なるグループからの連絡を同時受信して適切な指示・連絡ができます。 ●混信時にボタン一つで使用中の同一グループがチャンネル移動できるテレポート機能付きです。通話範囲外にいてテレポートできなかった場合にもテレポートキーを短押しすればメンバーの通話チャンネルを見つけて自動で移動します。 ●現場の電波状況を分析し混信が起こりにくいチャンネルを見つけるエリアリサーチ機能を使い最適なチャンネルを選択できます。 ●アクセスキーを一度押して話しを開始すればハンズフリーで通話が可能、話をやめれば自動的に受信状態に戻ります。 ●700mWのクラス最大音量スピーカーを搭載していますので、工事現場の騒音下でもクリアな音声で聴くことができます。 ※詳しくはPDF資料をご覧いただくか、お気軽にお問い合わせ下さい。

  • Other safety equipment
  • Other network tools
  • Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[New Wave Support] Hybrid IP Transceiver IP700 PLUS

[New Wave Support] Hybrid IP Transceiver IP700 PLUS

A hybrid IP transceiver that combines an IP transceiver usable nationwide in Japan within mobile phone call areas and a digital simple radio.

● The IP700 PLUS is a hybrid IP transceiver manufactured by Icom. ● The IP700 PLUS is compatible with the new wave. It increases the existing digital simple radio registered station (3R) from 30 channels to 82 channels by adding 52 channels for the new wave. The existing air channels increase from 5 channels to 15 channels by adding 10 channels for the new wave. *Note: Air channels are receive-only. The existing digital simple radio licensed station (3B) increases from 65 channels to 95 channels by adding 30 channels for the new wave (3C/3D). *Note: 20 channels for relay (3D) are planned to be supported. ● It has two functions: LTE communication via IP and direct communication via digital simple radio, allowing for communication even when out of mobile phone network coverage or during LTE line troubles. ● Normally, it switches between LTE mode for communication with IP radios and DCR mode for communication with digital simple radios. ● In LTE mode, simultaneous calls can be made without a limit on the number of participants. In DUAL mode, only alternating calls are possible. *For more details, please refer to the PDF document or feel free to contact us.

  • Other safety equipment
  • Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[New Wave Support] Digital Simple Radio License Station IC-DU75 PLUS

[New Wave Support] Digital Simple Radio License Station IC-DU75 PLUS

Digital simple radio licensed station with GPS location information and Bluetooth communication support, increased to 30 channels for digital simple radio registered stations (3C/3D).

The IC-DU75 PLUS is a new wave-compatible digital simple radio licensed station manufactured by Icom. The differences from the IC-DU75 are as follows: It increases the existing digital simple radio licensed station (3B) 65 channels by adding 30 channels for the new wave-compatible digital simple radio registered station (3C/3D), bringing the total to 95 channels. *The relay (3D) 20 channels are planned to be supported. *There are no changes to functions or performance other than for the new wave. It is equipped with a Bluetooth unit. It has GPS functionality that can be transmitted to the other station. It features a sub-channel PTT function that allows for sending and receiving across up to 3 channels without the need to switch channels. It has ruggedness that meets the U.S. Department of Defense procurement standards (MIL-STD-810G) tests. It has dust and water resistance ratings of IP67/66/55/54, making it safe to use in rain and sandy conditions. It is equipped with a loudspeaker of 800mW that is easy to hear even in noisy environments. The antenna connector on the radio side is SMA-J. The manufacturer offers a free warranty period of 3 years. *For more details, please refer to the PDF document or feel free to contact us.

  • Other safety equipment
  • Other network tools
  • Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Repeater Compatible] Specific Low Power Transceiver FC-ZXPRO

[Repeater Compatible] Specific Low Power Transceiver FC-ZXPRO

A specific low-power transceiver with dustproof and waterproof performance that can be operated even on humid days such as rainy days, available as an all-in-one package product that can be used immediately.

● The FC-ZXPRO (FCZXPRO) is a specific low-power transceiver manufactured by F.R.C Corporation. ● It is suitable as a transmitter for the B-EAR sports-specific receiver, the BRIDGECOM R2 Field Receiver, because it does not produce a buzzing sound during transmission. ● It is compatible with the FC-R3 wireless repeater, allowing for an expanded communication area. ● It comes as an all-in-one package with a rechargeable battery and charger, ready to use from the day of purchase. ● It features a hands-free VOX function. ● It has a second talk function that allows for standby on two channels: main and sub. ● It can be set to 38 different groups. ● It includes a selectable scrambler function with six types of secret codes. ● It has an auto power-off function that turns off the device after a certain period. ● It features a talk beep function. ● It includes a squelch function. ● It has a key lock function. ● It has a key tone ON/OFF feature. ● There is a one-year manufacturer warranty for natural defects at no charge. ● It has an IP65 rating for dust and water resistance. *For more details, please refer to the PDF document or feel free to contact us.*

  • Other safety equipment
  • Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[No license or qualifications required] Relay device for specific low-power transceivers FC-R3

[No license or qualifications required] Relay device for specific low-power transceivers FC-R3

A relay device for specific low-power transceivers that can be powered ON/OFF and reset with an infrared remote control, and can be installed indoors and outdoors due to its waterproof performance of IPX7.

● The FC-R3 is a relay device for specific low-power transceivers manufactured by FRC Corporation. ● It has relay functionality for specific low-power transceivers, theoretically doubling the communication area. ● It is a recommended relay device when using the B-EAR BRIDGECOM R2 Field Receiver with the transmitter set to the specific low-power transceiver FC-ZXPRO. ● It uses a half-duplex method with two frequencies: a receiving frequency of 421 MHz and a transmitting frequency of 440 MHz. ● It supports 18 business channels (1ch to 18ch) and 9 leisure channels (19ch to 27ch), for a total of 27 channels. ● It has a 38-group mode. ● SQL (squelch) sensitivity can be set to five levels. ● The settings and control of the relay device can be done using the included infrared remote control. ● It has a strong waterproof rating of IPX7. ● It features a robust body case made of aluminum die-cast. ● It operates on household power AC100V using the included AC adapter FC-R3AC. ● It has an all-reset function that allows all settings to be returned to the initial factory state with simple operation. *For more details, please refer to the PDF document or feel free to contact us.*

  • Other network tools
  • Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
IPX4 Splash-proof Ear-hook Type Professional Headset Microphone EME-914MA

IPX4 Splash-proof Ear-hook Type Professional Headset Microphone EME-914MA

IPX4 splash-proof, ear-hook type professional earphone microphone compatible with all Alinco transceivers using a 4-pole screw-in plug.

The EME-914MA (EME914MA) is a splash-proof, ear-hook type professional headset microphone made by Alinco (ALINCO) with an IPX4 rating. It can be used with various Alinco 4-pole screw-type plug radios. This is a professional-grade headset microphone. The microphone part is water-resistant for everyday use with an IPX4 rating, which helps prevent water ingress from the switch area. The headset features an ear-hook design with large ear caps, making it less likely to cause ear pain even during prolonged use, and the cable is a durable twisted cord. The headset connection connector is φ2.5mm. The microphone comes with a windscreen to reduce wind noise. There is a rotating clip on the back of the microphone part that allows it to be attached to the chest. The PTT has a locking function. There is no microphone gain switch. Individual parts can also be purchased: - Twisted cable headset: EZ0041 - Ear pads (black): 5-piece set AD012 / 20-piece set AD013 - Microphone windscreen (with windscreen and plastic parts for fixing): FG0898 For more details, please feel free to contact our company.

  • Other network tools
  • Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
260MHz Band Wideband 5-Element Yagi Antenna 5BD-2502

260MHz Band Wideband 5-Element Yagi Antenna 5BD-2502

The arm, element, and bracket are made of stainless steel, making it a high-strength wideband 5-element Yagi antenna for municipal digital mobile communication system fixed stations.

The 5BD-2502 (5BD2502) is a wideband 5-element Yagi antenna manufactured by Nippon Antenna, designed for the 260 MHz band. *The Yagi antenna consists of three rods of different lengths that form a single antenna, with the shorter rod serving as a director, the middle rod as a driven element, and the longest rod as a reflector, resulting in a highly directional antenna. It was invented in 1926. *This is a wideband 5-element Yagi antenna for fixed stations in municipal digital mobile communication systems. *The operating frequency range is 260 to 275 MHz. *When placing an order, please specify ft (transmission frequency, MHz) and fr (reception frequency, MHz). *The arms, elements, and brackets are made of stainless steel, providing excellent weather resistance and strength. *The feed point is highly waterproof, ensuring stable performance. *The recommended antenna mounting bracket is C-30. *It comes with an NJ connector, which can be connected if the connector on the radio side is NP. For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. *For more details, please feel free to contact us.

  • Other network tools
  • Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Cover-equipped wideband 5-element Yagi antenna 5BD-930A

Cover-equipped wideband 5-element Yagi antenna 5BD-930A

Cover-type wideband 5-element Yagi antenna compatible with the new frequency band of 850MHz to 940MHz.

The 5BD-930A is a cover-equipped wideband 5-element Yagi antenna manufactured by Japan Antenna. *The Yagi antenna is a type of antenna consisting of three rods of different lengths that form a single antenna, with the shorter rod serving as a director, the radiating element, and the reflector, making it a highly directional antenna. It was invented in 1926. *The supported frequency range is 850MHz to 940MHz. This antenna is compatible with the new frequency band of MCA after the MCA frequency transition. *The antenna part is fully covered, making it resistant to rain and wind, and it has excellent weather resistance. *As this is a directional antenna that only receives radio waves from a specific direction, please install it according to the direction of the incoming radio waves. *It has a high gain of 10.15dBi. *Please use it in combination with the separately sold MCA Advance connection cable (24m) 5D2V-NP-SMAP-24. *Note: When using outdoors, please waterproof the connector part with tape or similar methods. *The terminal shape is N-J type. For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. *For more details, please feel free to contact us.

  • Other network tools
  • Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
3-element Yagi antenna 3BD-930 (18MSMA-P) set

3-element Yagi antenna 3BD-930 (18MSMA-P) set

SMAP type 3-element for MCA system advance that can be used for transmission and reception corresponding to 850MHz to 945MHz.

The 3BD-930 (18MSMA-P) set is a 3-element MCA Advance SMAP type antenna manufactured by Nippon Antenna. It is a set product that includes the wideband 3-element Yagi antenna (without cover) 3BD-930 and the connection cable for MCA Advance (18m) 5D2V-NP-SMAP-18. Please be sure to connect the included cable 5D2V-NP-SMAP-18 for use. This is a 3-element Yagi antenna mainly used for transmission and reception with MCA Advance. It supports frequencies from 850MHz to 945MHz. The internal part of the feeding section is completely sealed and waterproof. This antenna is a single-directional Yagi antenna with wideband radiating elements, reflecting elements, and guiding elements, offering high gain and sharp directivity. Included accessories: - Feeding cable (30cm) ×1 - Connection cable for MCA Advance (18m) 5D2V-NP-SMAP-18 ×1. For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. For more details, please feel free to contact us.

  • Other network tools
  • Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Mobile Station Vehicle-Mounted Magnet Type Base] MG-BA5-09(7M)

[Mobile Station Vehicle-Mounted Magnet Type Base] MG-BA5-09(7M)

Mobile station vehicle-mounted magnetic type base (5D-2V 7m) made by Nippon Antenna.

● The MG-BA5-09(7M) is a magnet-type base station for mobile units manufactured by Nippon Antenna. ● It is an antenna base for vehicle-mounted radios. ● It can be used by combining it with separately sold antenna elements and installing the base on the vehicle's rooftop or similar locations using the included strong magnet. ● The antenna part of the base has a screw-type connector. The antenna element can be attached by turning it clockwise. ● Please use it in combination with separately sold capacity installation type 3/4λ whip antennas HMG-450-1-09EL, HMG-450-3B-09, vehicle-mounted antenna element EL480 for the 148-157 MHz band, and vehicle-mounted element EL458 for the 150 MHz band. ● The radio connection side has an attachment connector, and you can choose from the following connectors according to the radio used: - M-P connector M・P-TA2 - N-P connector N・P-TA - BNC-P connector BNC・P-TA - TNC-P connector TNC・P-TA For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. * For more details, please feel free to contact us.

  • Other network tools
  • Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
5-element Yagi antenna 5BD-930 (26MSMA-P) set

5-element Yagi antenna 5BD-930 (26MSMA-P) set

SMAP type 5-element for MCA system advance that can be used for transmission and reception corresponding to 850MHz to 945MHz.

The 5BD-930(26MSMA-P) set is a 5-element MCA Advance SMAP type antenna manufactured by Nippon Antenna. It is a set product that includes the wideband 5-element Yagi antenna (without cover) 5BD-930 and the connection cable for MCA Advance (26m) 5D2V-NP-SMAP-26. Please be sure to connect the included cable 5D2V-NP-SMAP-26 for use. This is a 5-element Yagi antenna primarily used for transmission and reception with MCA Advance. It supports frequencies from 850MHz to 945MHz. The internal feeding part is completely sealed and waterproof. This antenna is a single-directional Yagi antenna with wideband radiating elements, reflecting elements, and guiding elements, offering high gain and sharp directivity. Accessories include: - Feeding cable (30cm) ×1 - Connection cable for MCA Advance (26m) 5D2V-NP-SMAP-26 ×1. For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. For more details, please feel free to contact us.

  • Other network tools
  • Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.