Transceiver Product List and Ranking from 142 Manufacturers, Suppliers and Companies

[Mobile Station Vehicle-Mounted Magnet Type Base] MG-BA5-09(7M)

Mobile station vehicle-mounted magnetic type base (5D-2V 7m) made by Nippon Antenna.

● The MG-BA5-09(7M) is a magnet-type base station for mobile units manufactured by Nippon Antenna. ● It is an antenna base for vehicle-mounted radios. ● It can be used by combining it with separately sold antenna elements and installing the base on the vehicle's rooftop or similar locations using the included strong magnet. ● The antenna part of the base has a screw-type connector. The antenna element can be attached by turning it clockwise. ● Please use it in combination with separately sold capacity installation type 3/4λ whip antennas HMG-450-1-09EL, HMG-450-3B-09, vehicle-mounted antenna element EL480 for the 148-157 MHz band, and vehicle-mounted element EL458 for the 150 MHz band. ● The radio connection side has an attachment connector, and you can choose from the following connectors according to the radio used: - M-P connector M・P-TA2 - N-P connector N・P-TA - BNC-P connector BNC・P-TA - TNC-P connector TNC・P-TA For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. * For more details, please feel free to contact us.

Company：エクセリ
Price：10,000 yen-100,000 yen

Other network tools
Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

5-element Yagi antenna 5BD-930 (26MSMA-P) set

SMAP type 5-element for MCA system advance that can be used for transmission and reception corresponding to 850MHz to 945MHz.

The 5BD-930(26MSMA-P) set is a 5-element MCA Advance SMAP type antenna manufactured by Nippon Antenna. It is a set product that includes the wideband 5-element Yagi antenna (without cover) 5BD-930 and the connection cable for MCA Advance (26m) 5D2V-NP-SMAP-26. Please be sure to connect the included cable 5D2V-NP-SMAP-26 for use. This is a 5-element Yagi antenna primarily used for transmission and reception with MCA Advance. It supports frequencies from 850MHz to 945MHz. The internal feeding part is completely sealed and waterproof. This antenna is a single-directional Yagi antenna with wideband radiating elements, reflecting elements, and guiding elements, offering high gain and sharp directivity. Accessories include: - Feeding cable (30cm) ×1 - Connection cable for MCA Advance (26m) 5D2V-NP-SMAP-26 ×1. For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. For more details, please feel free to contact us.

Company：エクセリ
Price：100,000 yen-500,000 yen

Other network tools
Transceiver

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

60MHz Band 5-Element Yagi Antenna 5DV-0608

60MHz band 5-element Yagi antenna suitable for both transmission and reception for BCP measures.

The 5DV-0608 (5DV0608) is a 60MHz band 5-element Yagi antenna manufactured by Nippon Antenna. * The Yagi antenna is a type of antenna made up of three rods of different lengths, functioning as a director, driven element, and reflector, which provides high directivity. It was invented in 1926. * This is a 5-element Yagi antenna suitable for both transmission and reception, designed for municipal disaster prevention administrative radio use. * It is a representative antenna of single directivity, mainly composed of an antenna, reflector element, and director element. * The appearance is simple, with the supply section and element blanket molded from reinforced resin. * It operates at a specified frequency within the range of 54 to 75MHz. The model number varies depending on the frequency band. - 5DV-0608 68.2-69.8MHz - 5DV-0608 55-66MHz When placing an order, please specify the center frequency (fo) in MHz. * The connector is NJ. * The compatible antenna mounting bracket is F-1 (round)-K2 (D). For extremely low-priced sales of earphone microphones, batteries, and more, please leave it to Excelli. * For more details, feel free to contact our company.

Company：エクセリ
Price：100,000 yen-500,000 yen

Other network tools
Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

400MHz Band 3-Element Yagi Antenna 3SBD-4502

A 3-element Yagi antenna that can share two frequencies with a frequency interval of 48 MHz or less within the range of 330 to 470 MHz.

The 3SBD-4502 (3SBD4502) is a wideband 3-element Yagi antenna manufactured by Nippon Antenna for the 400 MHz band. *The Yagi antenna is a type of antenna that consists of three rods of different lengths, functioning as a director, driven element, and reflector, providing high directivity. It was invented in 1926. *This is an antenna for radio equipment. *It is a 3-element Yagi antenna that can share two frequencies within the 330-470 MHz range with a frequency spacing of less than 48 MHz. *When placing an order, please specify ft (transmission frequency, MHz) and fr (reception frequency, MHz). *The connector is NJ. *The compatible mounting brackets for the antenna are C-31(B) and C-19(B). For extremely low-priced sales of earphone microphones, batteries, and more, please leave it to Excelli. *For more details, feel free to contact us.

Company：エクセリ
Price：100,000 yen-500,000 yen

Other network tools
Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

400MHz Band Directional 6-Element Collinear Antenna 6DA-450

Directional 6-segment collinear antenna with lightning protection at specified frequencies within 330-470 MHz.

The 6DA-450 is a directional six-stage collinear antenna with a lightning rod manufactured by Nippon Antenna for the 400 MHz band. It is an antenna for fixed station radios. The frequency is a specified frequency within the range of 330-470 MHz (UHF band). Please specify the center frequency (fo) in MHz when placing your order. It features a stacked dipole antenna on a stainless steel mast, providing high gain and durability. It is equipped with a lightning rod. This antenna has a cardioid radiation pattern, which means that the shape of the directional diagram resembles a heart (cardioid), with the strongest radiation in the front direction. The gain is 11.15 dBi. The antenna length is approximately 5.77 m. It weighs 35 kg. The antenna side connector is an N-J type. Note that the antenna side connector is only N-J; it can be converted to other connectors using an extension coaxial cable. An 80 cm coaxial 8D-2V cable extends from the antenna. The antenna mounting brackets B-4-1 and B-8-1(C) are compatible. For more details, please feel free to contact us.

Company：エクセリ
Price：500,000 yen-1 million yen

Other network tools
Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

DJ-P422B-T with Air Clone Mode equipped

Equipped with wireless link relay calls and air cloning, this Bluetooth-compatible specific low-power transceiver is ideal for construction sites and work sites.

● The DJ-P422B-T is a Bluetooth-compatible specific low-power transceiver manufactured by Alinco. ● There are two types: the middle antenna DJ-P422B-TM and the long antenna DJ-P422B-TL. ● The DJ-P422B-T has the following features added to the DJ-P421A. Everything else is the same. - Up to four optional wireless linking repeaters, DJ-P113R and DJ-P116R, can be installed to extend the communication range mainly in a straight direction, enabling wide-area communication. - It is equipped with a call vibration function that alerts you to incoming calls through vibrations. - It features an air clone mode that allows easy copying of various settings between DJ-P422B-T units. ● It is compatible with optional Alinco Bluetooth accessories such as EME-80BMA, EMS-87B, and EMS-87BNC. ● It supports a total of 47 channels, including relay channels. ● With an IP67 equivalent strong dustproof and waterproof design, it can be used safely in rain and dusty conditions. ● The estimated charging time for the nickel-metal hydride battery EBP-179 is about 6 hours. ● The manufacturer's free warranty period is 1 year. * For more details, please refer to the PDF document or feel free to contact us.

Company：エクセリ
Price：Other

Other network tools
Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

F-type antenna mounting bracket F-20W

F-type antenna mounting bracket for attaching an antenna to a pole/mast.

●F-20W (F20W) is an F-type antenna mounting bracket manufactured by Nippon Antenna. ●It is a bracket for mounting antennas on poles/masts. ●It accommodates mast diameters ranging from φ100 to φ410 and antenna mounting section diameters from φ22 to φ32. ●The model number changes according to the corresponding mast diameter and antenna mounting section diameter. ・Mast diameter range φ120 to φ190, antenna mounting section diameter φ22 to φ32: F-20W(B) ・Mast diameter range φ170 to φ260, antenna mounting section diameter φ22 to φ32: F-20W(C) ・Mast diameter range φ230 to φ320, antenna mounting section diameter φ22 to φ32: F-20W(D) ・Mast diameter range φ300 to φ410, antenna mounting section diameter φ22 to φ32: F-20W(E) *For more details, please feel free to contact our company.

Company：エクセリ
Price：Other

Other network tools
Transceiver

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

F-type antenna mounting bracket F-20

F-type antenna mounting bracket for attaching an antenna to a pole/mast.

The F-20 (F20) is an F-type antenna mounting bracket manufactured by Nippon Antenna. It is a bracket for attaching antennas to poles/masts. It accommodates mast diameters ranging from φ100 to φ410 and antenna mounting section diameters from φ22 to φ32. The model number changes according to the corresponding mast diameter and antenna mounting section diameter: - Mast diameter range φ100 to φ120, antenna mounting section diameter φ22 to φ32: F-20(A) - Mast diameter range φ120 to φ190, antenna mounting section diameter φ22 to φ32: F-20(B) - Mast diameter range φ170 to φ260, antenna mounting section diameter φ22 to φ32: F-20(C) - Mast diameter range φ230 to φ320, antenna mounting section diameter φ22 to φ32: F-20(D) - Mast diameter range φ300 to φ410, antenna mounting section diameter φ22 to φ32: F-20(E) For more details, please feel free to contact us.

Company：エクセリ
Price：Other

Other network tools
Transceiver

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

F-type antenna mounting bracket F-23

F-type antenna mounting bracket for attaching an antenna to a pole/mast.

The F-23 (F23) is an F-type antenna mounting bracket manufactured by Nippon Antenna. It is a bracket for attaching antennas to poles/masts. It accommodates mast diameters ranging from φ120 to φ400 and antenna mounting section diameters from φ43 to φ65. The model number varies depending on the compatible mast diameter and antenna mounting section diameter. *For more details, please feel free to contact our company.*

Company：エクセリ
Price：Other

Other network tools
Transceiver

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

F-type antenna mounting bracket F-1 (round) - K2E (set)

F-type antenna mounting bracket for installing a 60MHz band 5-element Yagi antenna.

The F-1 (round) - K2E (set) is an F-type antenna mounting bracket manufactured by Nippon Antenna. It is primarily used for mounting a 5-element Yagi antenna in the 60 MHz band. It is installed in an arm type. The compatible arm diameter for the antenna is φ25 to φ38. The compatible diameter range is φ76 to φ100. *For more details, please feel free to contact our company.

Company：エクセリ
Price：100,000 yen-500,000 yen

Other network tools
Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Antenna Mounting Bracket (For Flat Surface) PSK-32F

Mounting bracket for flat surfaces used for installing BS/CS antennas and similar equipment on walls or flat areas.

●PSK-32F (PSK32F) is a mounting bracket for antennas made by Nippon Antenna. ●It is used for mounting BS and CS antennas on walls or flat surfaces. ●It is compatible with BS and CS antennas with a diameter of 50 cm or less. ●The compatible mast diameter is 32 mm. ●The mast is made of stainless steel. ●The main body is color-coated in ivory. *For more details, please feel free to contact our company.*

Company：エクセリ
Price：Less than 10,000 yen

Other network tools
Transceiver

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

F-type antenna mounting bracket F-1 (round) - KC (set)

F-type antenna mounting bracket for installing a 60MHz band 3-element Yagi antenna.

The F-1 (round) - KC (set) is a mounting bracket for F-type antennas manufactured by Nippon Antenna. It is primarily used for mounting 3-element Yagi antennas in the 60 MHz band. It is installed in an arm shape. The compatible arm diameter for the antenna is φ25 to φ38. The adjustable band diameter range is φ230 to φ320, and the upper mast diameter range is φ230 to φ300. *For more details, please feel free to contact our company.

Company：エクセリ
Price：10,000 yen-100,000 yen

Other network tools
Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

60MHz Band 3-Element Sleeve Antenna 3SL-060

A 60MHz band three-element sleeve antenna equipped with a reflector and waveguide, featuring high gain and directivity.

The 3SL-060 (3SL060) is a 60MHz band 3-element sleeve antenna manufactured by Nippon Antenna. * A sleeve antenna is a broadband 1/4 wavelength linear antenna used in an upright position, characterized by its non-directionality, allowing it to receive and transmit signals from any angle without directional focus. * It is an antenna designed for fixed station radios. * It operates at a specified frequency within the 54-75MHz range. Please specify the center frequency (fo/MHz) when placing your order. * This sleeve antenna is equipped with reflectors and waveguides to enhance gain and directivity, making it a vertically polarized directional antenna used for fixed stations. * The sleeve completely prevents radio wave leakage to masts and other structures, ensuring stable characteristics. * A waterproof tube is included, providing complete waterproofing for the feeding part (connector area). * The connector is NJ. * For more details, please feel free to contact us.

Company：エクセリ
Price：500,000 yen-1 million yen

Other network tools
Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

60MHz Band Sleeve-Type Antenna SL-060

A sleeve-type antenna for the 60MHz band that has a small footprint and is easy to install.

The SL-060 (SL060) is a sleeve-type antenna manufactured by Nippon Antenna, designed for the 60MHz band. * A sleeve antenna is a broadband linear antenna that is 1/4 wavelength long and is used in an upright position. * It is an antenna for fixed station radios. * It operates at a specified frequency within the range of 54 to 75MHz. Please specify the center frequency (fo/MHz) when placing your order. * It is an omnidirectional antenna. * It consists of a 1/4 wavelength radiating element and a 1/4 wavelength sleeve (blocking tube), forming a coaxial vertical dipole. * Its shape occupies a small space and allows for easy installation. * The connector is NJ. * The compatible antenna mounting bracket is B-8-2(A), and the mounting diameter of 48.6φ is F-23(E). * For more details, please feel free to contact us.

Company：エクセリ
Price：100,000 yen-500,000 yen

Other network tools
Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

60MHz Band 4-Element Sleeve Antenna 4SL-060

A 60MHz band four-element sleeve-type antenna equipped with a reflector and waveguide, featuring high gain and directivity.

The 4SL-060 (4SL060) is a 60MHz band 4-element sleeve antenna manufactured by Nippon Antenna. * A sleeve antenna is a broadband 1/4 wavelength linear antenna that is used in an upright position. * It is an antenna for fixed station radios. * It is a unidirectional antenna that transmits and receives radio waves from one direction. * It operates at a specified frequency within the 54–75MHz range. Please specify the center frequency (fo/MHz) when placing your order. * To enhance the gain and directivity of the sleeve antenna, it is equipped with a reflector and a waveguide, making it a vertically polarized directional antenna used for fixed stations. * The sleeve completely prevents radio wave leakage to masts and other structures, ensuring stable characteristics. * A waterproof sleeve is included, providing complete waterproofing for the feeding part (connector part). * The connector is NJ. * The compatible antenna mounting bracket is B-8-1(B), and for a mounting diameter of 48.6φ, it is B-8-1(A). * For more details, please feel free to contact us.

Company：エクセリ
Price：500,000 yen-1 million yen

Other network tools
Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Outdoor Automatic Tuner (ATU) Dedicated Element CPATU

Elements specifically designed for outdoor automatic tuners (ATU) compatible with various companies' outdoor-type tuners in the 3.5 to 50 MHz band.

● The CPATU is a dedicated element for outdoor automatic tuners (ATU) manufactured by Daiichi Denpa Kogyo (DIAMOND) for the 3.5 to 50 MHz band. ● It is a dedicated element compatible with outdoor tuners from various manufacturers such as AH-4, AH-705, AH-730, FC-40, FC-800, CG-3000, MFJ, etc. ● It also supports the 10/18/24 MHz bands, including WARC, in the 3.5 to 50 MHz range. *Note that the frequency may vary depending on the specifications of the connected tuner. ● The element has a structure that makes it easy to set up since it does not spread out radially. *For more details, please feel free to contact us.

Company：エクセリ
Price：10,000 yen-100,000 yen

Other network tools
Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Trunk/Hatchback Base (Folding) K400

Base for trunk and hatchback (foldable) made by Daiichi Denpa Kogyo (DIAMOND).

The K400 (K-400) is a trunk and hatchback mount base (foldable) manufactured by Daiwa Radio Industry (Diamond). It is used to install antenna equipment for vehicle-mounted radios by sandwiching the antenna between the car's trunk lid, trunk tail, or hatchback. Please use it in combination with separately sold coaxial cables and antennas. *Daiwa Radio Industry (Diamond) coaxial cables and antennas are recommended. It is ideal for installing non-radial type slim antennas made by Daiwa Radio Industry. *Non-radial refers to a type of wireless communication antenna designed to improve the efficiency of signal transmission and reception even when sufficient grounding cannot be secured. It complies with the European environmental regulation RoHS directive. *For more details, please feel free to contact us.

Company：エクセリ
Price：Less than 10,000 yen

Other network tools
Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Portable Sky Pole (Telescopic) C-SP-5

Portable telescopic sky pole made by Nippon Antenna.

●C-SP-5 (CSP5) is a portable sky pole (telescopic) made by Nippon Antenna. ●It is an easy-to-carry telescopic portable sky pole. ●The length is approximately 5.1m when extended and about 1.7m when shortened. ●It is used with an antenna attached. *For more details, please feel free to contact our company.*

Company：エクセリ
Price：100,000 yen-500,000 yen

Other network tools
Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

【Expandable communication area】Simple wireless repeater TCB-D239CR

A radio repeater that effectively expands the communication area and resolves dead zones where signals could not reach between digital simple radios.

● The TCB-D239CR (TCBD239CR) is a UHF simple radio relay station (licensed station) manufactured by JVC Kenwood. ● It is a digital simple radio licensed station 3D. It belongs to the digital simple radio system NEXEDGE CR series. ● By relaying the TCB-D239CR, JVC Kenwood's digital simple radio licensed stations TCP-D261BTE / TCP-D261E, TCP-D751 CT, TCM-D244E CT, and NX-330EXE CT can expand the communication area. ● It supports ARIB STD-T98 (version 2.0) for relay use with 10 pairs of channels. ● The transmission power can be set from 5.0W to 1.0W (default setting is 5.0W). ● It has a compact size that allows for mobile operation. ● It features a 1.71-inch OLED display. ● Equipped with a thermal control cooling fan for stable operation. ● It includes a USB Type A port for audio accessories. ● Status monitoring, remote operation, and firmware updates are possible via web tools. *For more details, please refer to the PDF document or feel free to contact us.*

Company：エクセリ
Price：Other

Other network tools
Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Mobile Tire-Riding Simple Mast Base TMB

Portable tire-mounted simple mast base manufactured by Daiichi Denpa Kogyo (DIAMOND).

● TMB is a portable tire-mounted simple mast base made by Daiichi Denpa Kogyo (DIAMOND). ● It serves as a base for securing the antenna of a radio device. ● It is used in combination with a separately sold pole (mast) and is compatible with mast diameters from Ø25 to Ø50mm. ● The mast base can be easily secured by driving a vehicle over it. ● Using the portable antenna mast AM385 allows for convenient mobile operation. ● It features a mast tilting mechanism. ● The metal parts are finished with hot-dip galvanized coating, making it resistant to rust. *For more details, please feel free to contact us.*

Company：エクセリ
Price：10,000 yen-100,000 yen

Other network tools
Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Bluetooth Bone Conduction Headset ASC100BK

Bluetooth bone conduction headset for U-BOX AT remote support wearable camera.

● ASC100BK (ASC-100-BK) is a Bluetooth bone conduction headset made by Shokz. ● It is designed for the remote assistance wearable camera U-BOX AT. ● When using it in conjunction with the U-BOX AT main unit and the helmet visor-mounted camera ST#7CAM-03U or ST#7CAM-04U, a Bluetooth bone conduction headset is required for audio transmission and reception. ● It connects via Bluetooth to the "Windows version" of the U-BOX AT main unit and shared terminals of the LW model. *For more details, please contact our company.*

Company：エクセリ
Price：Other

Other network tools
Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Coaxial Switch (1 Circuit 2 Contacts) CX210N

Manual coaxial switch with one circuit and two contacts used for switching high-frequency signals.

● The CX210N (CX-210N) is a coaxial switch (1 circuit, 2 contacts) manufactured by Daiwa. ● It is a manual coaxial switch with 1 circuit and 2 contacts used for switching high-frequency signals. ● It is used when connecting multiple antennas to a radio or for switching between multiple radios. ● The input/output connector is N-J. ● It complies with the European environmental regulation RoHS directive. *For more details, please feel free to contact us.*

Company：エクセリ
Price：10,000 yen-100,000 yen

Other network tools
Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Coaxial Switch (1 Circuit 3 Contacts) CX310A

Manual coaxial switch with 1 circuit and 3 contacts used for switching high-frequency signals.

The CX310A (CX-310A) is a coaxial switch (1 circuit, 3 contacts) manufactured by Daiwa. It is a manual coaxial switch with 1 circuit and 3 contacts used for switching high-frequency signals. It is used when connecting multiple antennas to a radio or for switching between multiple radios. It has good isolation with no coupling or induction between terminals. It has a high power tolerance and does not generate heat. The center conductor of the connector is gold-plated. The body is made of robust zinc die-cast. The input/output connector is M-J. It complies with the European environmental regulation RoHS directive. *For more details, please feel free to contact us.

Company：エクセリ
Price：10,000 yen-100,000 yen

Other network tools
Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Coaxial Switch (1 Circuit 2 Contacts) CX210A

Manual coaxial switch with one circuit and two contacts used for switching high-frequency signals.

●CX210A (CX-210A) is a coaxial switch (1 circuit, 2 contacts) manufactured by Daiwa (Diamond). ●It is a manual coaxial switch with 1 circuit and 2 contacts used for switching high-frequency signals. ●It is used when connecting multiple antennas to a radio or for switching between multiple radios. ●The input/output connector is M-J. ●It complies with the European environmental regulation RoHS directive. *For more details, please feel free to contact us.

Company：エクセリ
Price：10,000 yen-100,000 yen

Other network tools
Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Supports LTE+ Wireless LAN] IP Transceiver IP510H

The successor model of the highly acclaimed IP transceiver "IP500H Series," which supports communication via wireless LAN in addition to LTE connections.

The IP510H (IP-510H) is an IP transceiver (LTE + WLAN compatible) manufactured by Icom. It is the successor to the well-known "IP500H series" of IP radios (LTE radios). In addition to the basic functions of the previous models IP500H, IP501H, and IP502H, it includes the following new features: - WLAN compatible standards: IEEE802.11 b/g/a/n/ac - Compatible with WPA3, allowing connection to networks with high-level security environments - Supports Bluetooth PTT (only SPP) - Allows battery replacement without turning off the power while charging via USB Type-C In addition to the functions of the IP502H, it supports wireless LAN (WLAN). With WPA3 compatibility, it can connect to networks with high-level security environments, and can communicate via Wi-Fi (internet) when outside the LTE coverage area. It supports wireless LAN (WLAN) in addition to the functions of the IP502H. *For more details, please feel free to contact us.

Company：エクセリ
Price：Other

Other network tools
Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Power management and monitoring system for equipment 'XE1151'

Utilized for power management and monitoring of equipment.

● XE1151 (XE-1151) is a power management and monitoring system for equipment manufactured by Alinco. ● It can be utilized for power management and monitoring of equipment. ● XE1151 can notify changes in the status of AC power outages and live power via Sigfox. It can continuously monitor power supply and outages. ● XE1151 can detect the opening and closing of doors and windows and send this information via Sigfox to notify about their status. ● XE1151 can send alerts for temperature controllers via Sigfox to inform about temperature anomalies. ● XE1151 can remotely notify about alarm bell ringing and rotating light activation via Sigfox.

Company：エクセリ
Price：Other

Other safety equipment
Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Icom Programming Cable OPC-478UD

Programming cable for connecting a radio and a PC.

●OPC-478UD (OPC478UD) is a programming cable made by ICOM. ●If you need a USB driver, please download it from the ICOM website. ●It is used to configure the radio equipment with a computer. ●It can be used with IP transceivers IP502H, IP501H, IP500H, IP510H, and wireless LAN transceivers IP100H/IP100FS/IP1000C. ●It is a successor to OPC-478UC-1.

Company：エクセリ
Price：Less than 10,000 yen

Other network tools
Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Base for career pipe (foldable) K540

Base for carrier pipe (foldable) made by Daiichi Denpa Kogyo (DIAMOND).

The K540 (K-540) is a carrier pipe base (foldable) manufactured by Daiwa (Diamond). It is an antenna base used for mounting antennas on vehicle side mirror pipes, carrier pipes, and railings of apartments or housing complexes. The compatible pipe diameter is Φ15 to Φ25mm. Please use it in combination with separately sold antenna elements. It is designed to match the Super Gainer series, but can also be combined with other antennas. Angle adjustment is possible. It complies with the European environmental regulation RoHS directive. *For more details, please feel free to contact us.

Company：エクセリ
Price：Less than 10,000 yen

Other network tools
Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Communication Receiver with Numeric Keypad DJ-X82

User-friendly communication receiver with an easy-to-use numeric keypad, perfect for beginners.

The DJ-X82 (DJX82) is a communication receiver with a keypad manufactured by Alinco. It is an easy-to-use receiver for beginners, equipped with a keypad. The charging and external power terminal is USB TYPE-C, allowing for USB charging. It features "Quick Memory" and "Quick Search Pass" banks with 200 channels each. With simple operations using the dial, you can skip noise while searching and temporarily store found signals, making it easy to move them to the conventional bank. It includes a selectable sound & silent simple bug detection mode. A free editing software that allows memory registration and set mode configuration (available for download from the Alinco website) can be connected to a PC using the included USB cable for settings. It can receive AM/FM and FM broadcasts from 76-108 MHz on a separate circuit. You can register the conditions for program scanning by pairs, allowing you to search the same band with different steps and modes. *For more details, please refer to the PDF document or feel free to contact us.

Company：エクセリ
Price：10,000 yen-100,000 yen

Other network tools
Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

F.R.C manufactured lithium-ion rechargeable battery NX-20BT

F.R.C manufactured specific low-power transceiver NX-20X / NX-20R / rechargeable battery for disaster prevention radio NX-W109RD

● The NX-20BT (NX20BT) is a lithium-ion rechargeable battery manufactured by F.R.C Co., Ltd. ● It is a rechargeable battery for the specific low-power transceivers NX-20X / NX-20R / FC-S22 and the disaster radio NX-W109RD made by F.R.C. ● The battery capacity is 1000mAh. ● The battery is charged using the charger NX-20BC while installed in the transceiver, or with the connecting AC adapter FC-ZXPROLC and the connecting AC adapter FC-AC01. ● The battery life is approximately 24 hours when used with the NX-20X. * This is an estimated time based on using the fully charged battery with a low-frequency output rating of 400mW, transmitting for 10 seconds, receiving for 10 seconds, and waiting for 80 seconds in a repeating cycle. ● The charging time is approximately 3.5 hours. * For more details, please feel free to contact us.

Company：エクセリ
Price：Other

Other network tools
Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Transceiver Product List and Ranking from 142 Manufacturers, Suppliers and Companies | IPROS GMS

Transceiver Manufacturer, Suppliers and Company Rankings

Transceiver Product ranking