Transceiver Product List and Ranking from 142 Manufacturers, Suppliers and Companies

Wireless relay device compatible specific low power transceiver NX-20R

An all-in-one package that includes a charger and battery, ready to use immediately upon purchase.

● The NX-20R (NX20R) is a specific low-power transceiver manufactured by F.R.C. Co., Ltd. It is part of the NEXTEC brand. ● It comes as an all-in-one package that includes a charger and battery, allowing you to use it immediately after purchase. ● By using the separately sold wireless repeater FC-R3, you can double the communication range (theoretical value). ● It has 38 channels, allowing for use in 38 group modes. ● The VOX (hands-free) function is available. ● It features a dual watch function that allows you to be on standby on two channels. If there is communication on either channel, you can talk on that channel. After the conversation ends, it will return to dual watch mode. ● It is a genuine product that complies with the technical standards set by the Ministry of Internal Affairs and Communications. ● It supports a full range of channels, including 20 channels for regular communication and 27 channels for relay communication. ● It can communicate with other manufacturers' specific low-power transceivers, including models with 9ch, 11ch, and 20ch. ● It can receive FM radio (76.0 to 90.0 MHz).

Company：エクセリ
Price：Other

Other safety equipment
Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Headset Microphone (Explosion-Proof)] EHS27-Ex

UL explosion-proof rugged commercial smart device PNC460U tie pin microphone + earphones

The EHS27-Ex (EHS27Ex) is an explosion-proof earphone microphone made by Hytera. It is a tie-pin microphone + earphone for the robust UL explosion-proof commercial smart device PNC460U. *Please note that it is for UL explosion-proof use and not for the non-explosion-proof PNC460. *It is compatible with UL explosion-proof standards. *For more details, please feel free to contact us.

Company：エクセリ
Price：Other

Other network tools
Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

1.9GHz Band Intercom Microphone WX-CM210

Earphone microphone for portable transceiver WX-CT200

● The WX-CM210 (WXCM210) is a talk microphone made by Panasonic. ● Earphones (3.5φ) are also included. The earphones come with three types of ear tips (large, medium, small). ● This is an earphone microphone for the portable transceiver WX-CT200. ● It connects to the WX-CT200 using the included transceiver connection cable. The connection cable has a coiled section, making it less likely to break even if it gets snagged. ● The microphone is a bidirectional electret microphone. ● There is a clip on the back of the microphone that allows it to be attached to clothing. ● The microphone itself is compact and lightweight, weighing about 17g (approximately 20g including the windscreen), so it is not burdensome to wear. ● A windscreen is also included to prevent wind noise. *For more details, please feel free to contact us.

Company：エクセリ
Price：Other

Other network tools
Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Antenna Station WX-CR200

This is the BX4-AMCS1 centralized charging station that can charge 8 BONX BOOST Full Packs simultaneously.

The WX-CR200 (WXCR200) is an antenna station manufactured by Panasonic. It is an antenna unit for the Panasonic J-DECT compliant 1.9GHz band digital wireless intercom system (multi-party simultaneous communication intercom). Up to 100 portable transceiver units WX-CT200 can be wirelessly connected to a single antenna station. It can be installed on the ceiling or wall and connected to the separately sold center unit WX-CX200 using a CAT5/CAT5e/CAT6 straight cable. The wiring distance between the WX-CX200 and WX-CR200 can be up to 200 meters. A single center unit WX-CX200 can connect up to 12 antenna stations. It comes with two omnidirectional antennas (external). The reception method is diversity reception.

Company：エクセリ
Price：Other

Other network tools
Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

1.9GHz Band Center Microphone WX-CM200

Center microphone for J-DECT compliant 1.9GHz band digital wireless intercom system (multi-party simultaneous communication intercom).

● The WX-CM200 (WXCM200) is a center microphone manufactured by Panasonic. ● It is a center microphone for the Panasonic J-DECT compliant 1.9GHz digital wireless intercom system (multi-party simultaneous communication intercom). ● It connects to the separately sold center unit WX-CX200 using a CAT5/CAT5e/CAT6 straight cable. The wiring distance between the WX-CX200 and WX-CM200 is up to 50m. ● By connecting to the center unit WX-CX200, two-way communication with the portable transceiver WX-CT200 is possible. Individual calls can also be made. ● An amplifier-equipped speaker can be connected for audio confirmation. ● The power supply is DC24V, provided from the center unit WX-CX200. *For more details, please feel free to contact us.*

Company：エクセリ
Price：Other

Other network tools
Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Wireless headset for helmets EME-90WNC

Wireless headset with built-in noise cancellation for app-compatible helmets.

The EME-90WNC (EME90WNC) is a wireless headset for helmets made by Alinco, equipped with noise cancellation and compatible with app radios. It pairs with a smartphone (or mobile device) that has the wireless app Air-InCom (ACP-100 / ACP-101) or Air-InCom Lite (ACP-100L / ACP-101L) installed via Bluetooth 4.2. It is designed to be mounted on a helmet. The PTT button is large enough to be used even while wearing gloves. The PTT button switches between sending and receiving. If the app is set to PTT hold, pressing the PTT key once initiates a call, and pressing it again ends the call, allowing for hands-free operation. It can also respond to regular phone calls coming in on the smartphone when not in an app call. It features high-performance noise cancellation, allowing for clear voice communication by canceling surrounding noise.

Company：エクセリ
Price：Other

Other network tools
Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Dual Band 8 Element Beam Antenna A1430S8

A compact dual-band beam antenna for 144/430MHz band, usable from mobile to fixed applications.

The A1430S8 (A1430-S8) is a dual-band 8-element beam antenna for the 144/430MHz band manufactured by Daiwa. It is a compact dual-band beam antenna for 144/430MHz that can be used for both mobile and fixed applications. It supports the 144/430MHz band with a single feed point. It is small and lightweight, weighing only 1.2kg. No tools are required for mast installation. *For more details, please feel free to contact us.*

Company：エクセリ
Price：10,000 yen-100,000 yen

Other network tools
Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[App Wireless Compatible] Specific Low Power Transceiver DJ-P422W

App wireless / wireless connection relay compatible half-duplex specific low-power transceiver

The DJ-P422W (DJP422W) is a specific low-power transceiver manufactured by Alinco, compatible with app-based radio and alternating/repeater communication. There are two types of antennas available: the middle antenna DJ-P422WM and the long antenna DJ-P422WL. It supports the app-based radio Air-InCom.Lite and is also compatible with alternating and repeater communication between specific low-power transceivers. The app-based radio Air-InCom.Lite can be contracted by a single user. There are 500 channels available for "open channel" communication similar to group calls with specific low-power transceivers. Additionally, if you contract the optional "secret channel," you can communicate on a channel exclusive to your group. When you purchase the DJ-P422W, you can use a coupon code to try Air-InCom.Lite for one account free of charge for a limited time (a smartphone is required separately, and data communication fees will be incurred by your mobile carrier). In addition to the rechargeable Ni-MH battery, it can also operate with a single readily available AA battery. *For more details, please feel free to contact us.

Company：エクセリ
Price：Other

Other network tools
Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Tabletop charger 'CH20L20'

Charging dock for Hytera's rugged commercial smart device PNC460.

●CH20L20 (CH20-L20) is a desktop charger manufactured by Hytera. ●It is a charging dock for the rugged business smart device PNC460 from Hytera. *Note: It is not for explosion-proof use, so it cannot be used with the UL explosion-proof PNC460U. ●It has two charging pockets, allowing for the charging of two devices. ●It is used in combination with the power adapter PS2022 and the USB Type-C cable PC143. ●It can be charged from a household power supply of AC100V. ●It supports charging for lithium-ion and lithium-polymer batteries. ●The output is 5V/2A, 9V/2A, and 12V/1.5A. ●It complies with the European environmental regulation RoHS directive. ●The charging time is approximately 135 minutes. *For more details, please feel free to contact us.

Company：エクセリ
Price：Other

Other network tools
Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Wireless Repeater Compatible] Specific Low Power Transceiver FC-G20R

A specific low-power transceiver that does not require a license or qualification, and can be used from the day of purchase, compatible with waterproof and wireless relay devices.

The FC-G20R (FCG20R) is a waterproof, wireless relay-compatible specific low-power transceiver manufactured by F.R.C. No license or qualifications are required, and it can be used from the day of purchase. It is compatible with wireless relay devices, so if the communication distance is insufficient, you can use the separately sold wireless relay devices FC-R3 or FC-R1 to approximately double (theoretical value) the range. It can communicate with specific low-power transceivers from other manufacturers. *In the case of group calls *The arrangement of channels may differ. It has perfect waterproof and dustproof functions equivalent to IP67. Calling and communication can be done in both group and all-call modes (38 groups). Additionally, it has the following features: - VOX (hands-free) function - PTT hold function - APO (auto power off) function - Squelch function - Flashlight function - Bell call function - Roger tone function - Secret communication function - Channel scan function - Key lock function - Key tone ON/OFF function - Transmission start sound setting - Transmission permission/prohibition setting *For more details, please refer to the PDF document or feel free to contact us.

Company：エクセリ
Price：Other

Other safety equipment
Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Time Information Radiator Built-in TV Terminal WTUE7

A television terminal with a built-in time information radiating device that can obtain time information from terrestrial digital broadcast television signals even in areas where standard radio waves do not reach.

● WTUE7 (WTUE-7) is a television terminal with a built-in time information transmitter manufactured by Nippon Antenna. ● It is a device that uses terrestrial digital broadcast television signals to correct the time of radio clocks. ● To obtain time information from terrestrial digital broadcast television signals, it can be installed and used with the same type of work as regular indoor television wiring. ● It can automatically correct radio clocks even in places where standard radio waves do not reach, such as inside apartments, buildings, large structures, or underground. *For more details, please feel free to contact us.*

Company：エクセリ
Price：Other

Other network tools
Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Tabletop Stand Type Unidirectional Microphone MV-P370

Tabletop stand microphone ideal for in-house announcements and business broadcasts.

● The MV-P370 (MVP370) is a unidirectional microphone manufactured by JVC Kenwood. ● It is an ideal tabletop stand microphone for in-house announcements and business broadcasts. ● Being a unidirectional microphone, it is effective in minimizing surrounding noise and feedback. * A directional microphone is one that picks up sound only from a specific direction. ● It is equipped with a talk button that locks when turned to the right while pressed. In the locked state, hands-free broadcasting is possible. ● There is a semi-fixed volume control on the bottom for adjusting chime volume and microphone volume. ● It is powered by a household AC power supply of AC100V using the included AC adapter. ● The connector is a φ6.3 mono phone plug. * For more details, please feel free to contact our company.

Company：エクセリ
Price：Other

Other network tools
Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Antenna Pole (9m) AP-10

Antenna pole for installing antennas such as radios.

● The AP-10 (AP10) is a 9m antenna pole made by Nippon Antenna. ● It is an antenna pole for mounting antennas such as radios. ● Its extended length is 9m. ● Please use it in combination with the separately sold four-legged base holder (horse) BS-78 and wire rope (120M) SUS. ● When constructing the AP antenna pole, if the installation of the base holder BS-78 is unstable on the roof or similar locations, use the base pipe steering AS-63 and pre-tension the stay wire on the base pipe to secure it, allowing for safe pole extension work. *For more details, please feel free to contact our company.

Company：エクセリ
Price：10,000 yen-100,000 yen

Other network tools
Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Antenna Pole (12.8m) AP-14

Antenna pole for installing antennas such as radios.

●AP-14 (AP14) is an antenna pole (12.8m) manufactured by Nippon Antenna. ●It is an antenna pole for mounting antennas for radios and other devices. ●The length when extended is approximately 13m, and it is a 7-section pole. ●Please use it in combination with the separately sold four-legged base holder (horse) BS-78 and wire rope (120M) SUS. *For more details, please feel free to contact our company.

Company：エクセリ
Price：100,000 yen-500,000 yen

Other network tools
Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Antenna pole (7m) AP-8

Antenna pole for installing antennas such as those for radios.

●AP-8 (AP8) is an antenna pole (7m) manufactured by Nippon Antenna. ●It is an antenna pole for mounting antennas such as radios. ●The length when extended is 7m, and it is a 4-section pole. ●Please use it in combination with the separately sold four-legged base holder (horse) BS-78 and wire rope (120M) SUS. *For more details, please feel free to contact us.*

Company：エクセリ
Price：10,000 yen-100,000 yen

Other network tools
Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Four-legged base holder BS-78

Four-legged base holder made by Nippon Antenna.

● The BS-78 (BS78) is a four-legged base holder manufactured by Nippon Antenna. ● It can be combined with separately sold antenna poles AP-8 (7m), AP-10 (9m), AP-12 (10.9m), and AP-14 (12.8m). ● It is used in combination with antenna poles and stay wire ropes when installing antennas such as radios. ● When constructing with the AP antenna pole, if the installation of the BS-78 is unstable on the roof or similar locations, use the base pipe steering AS-63 and pre-tension the stay wire to secure it to the base pipe, allowing for safe pole extension work. *For more details, please feel free to contact us.*

Company：エクセリ
Price：10,000 yen-100,000 yen

Other network tools
Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Wireless Microphone Rechargeable Battery (Set of 2) WB-2000-2

A set of two rechargeable batteries WB-2000 for wireless microphones. Low self-discharge type nickel-metal hydride batteries that reduce environmental impact.

The WB-2000-2 (WB20002) is a rechargeable battery set (2 pieces) for wireless microphones manufactured by TOA Corporation. It contains two AA-sized nickel-metal hydride batteries (capacity 2000mAh) designed for wireless microphones. It uses a low self-discharge type nickel-metal hydride battery to reduce environmental impact. This battery is compatible with TOA models WM-D1210, WM-D1260, WM-D1310, WM-1420, WM-1100, WM-1120, WT-1100, WT-1101-C11C13, and WT-1101-C12C14. *For more details, please feel free to contact us.

Company：エクセリ
Price：Less than 10,000 yen

Other network tools
Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Wireless Microphone Rechargeable Battery (Set of 2) WB-1000A-2

A set of two rechargeable batteries WB-1000A for wireless microphones. Low self-discharge type nickel-metal hydride batteries that reduce environmental impact.

The WB-1000A-2 (WB1000A2) is a rechargeable battery set (2 pieces) for wireless microphones manufactured by TOA Corporation. It contains two AA nickel-metal hydride batteries (capacity 1000mAh) designed for wireless microphones. It uses low self-discharge type nickel-metal hydride batteries to reduce environmental impact. This battery is compatible with TOA models WM-D1210, WM-D1260, WM-D1310, WM-1420, WM-1100, WM-1120, WT-1100, WT-1101-C11C13, and WT-1101-C12C14. *For more details, please feel free to contact us.*

Company：エクセリ
Price：Less than 10,000 yen

Other network tools
Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Rooftop Whip WH-450-1ND-09

A whip antenna that is mounted by drilling with minimal adverse effects on the vehicle body.

The WH-450-1ND-09 (WH4501ND09) is a rooftop whip antenna (hole-mount type) manufactured by Nippon Antenna for the 400MHz band. It is an antenna for UHF radios. The compatible frequency range is 383.35 to 383.45MHz (receiving 399.0625 to 399.45MHz, transmitting 383.0625 to 383.45MHz). It is a whip antenna that requires hole-mount installation. Installation requires drilling. A whip antenna is defined as an antenna that has no directionality and can receive and transmit signals from any angle. This product has a mounting hole of φ16mm. It comes with an N-J connector, and the coaxial cable is sold separately. It is equipped with a ground wire, ensuring excellent electrical performance regardless of installation location, with minimal adverse effects from the vehicle body. It complies with safety standards. For more details, please feel free to contact us.

Company：エクセリ
Price：10,000 yen-100,000 yen

Other network tools
Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

F-type antenna mounting bracket F-1 (round) - K2D (set)

F-type antenna mounting bracket for installing a 5-element Yagi antenna in the 60MHz band.

The F-1 (Round) K2D (Set) is a mounting bracket for F-type antennas manufactured by Nippon Antenna. It is primarily used for mounting 5-element Yagi antennas in the 60 MHz band. It is installed in an arm shape. The compatible arm diameter for antennas is φ25 to φ38. The adjustable band compatible diameter range is φ300 to φ410, and the upper mast diameter range is φ300 to φ389. Antennas such as the 5-element Yagi antenna 5DV-0608 can be mounted. *For more details, please feel free to contact our company.*

Company：エクセリ
Price：100,000 yen-500,000 yen

Other network tools
Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Portable Sky Pole (Telescopic) C-SP-6

Portable telescopic sky pole made by Nippon Antenna.

●C-SP-6 (CSP6) is a portable sky pole (telescopic) made by Nippon Antenna. ●It is an easily portable telescopic sky pole. ●The length is approximately 5.6m when extended and about 1.7m when shortened. ●It is used by attaching antennas for radios and other devices. *For more details, please feel free to contact our company.*

Company：エクセリ
Price：100,000 yen-500,000 yen

Other network tools
Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Portable Sky Pole (Telescopic) C-SP-10

Portable telescopic sky pole made by Nippon Antenna.

●C-SP-10 (CSP10) is a portable sky pole (telescopic) made by Nippon Antenna. ●It is an easy-to-carry telescopic portable sky pole. ●The length is approximately 9.4m when extended and about 1.9m when shortened. ●It is used by attaching antennas for radios and other devices. *For more details, please feel free to contact our company.*

Company：エクセリ
Price：100,000 yen-500,000 yen

Other network tools
Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

F-type antenna mounting bracket F-1 (round) - KD (set)

F-type antenna mounting bracket for installing a 60MHz band 3-element Yagi antenna.

The F-1 (Round) KD (Set) is a mounting bracket for F-type antennas manufactured by Nippon Antenna. It is primarily used for mounting 3-element Yagi antennas in the 60 MHz band. It is installed in an arm type configuration. The compatible arm diameter for antennas is φ25 to φ38. The range for the adjustable band is φ300 to φ410, and the upper mast diameter range is φ300 to φ389. Antennas such as the 260 MHz band wideband 8-element Yagi antenna 8BD-2502 can be mounted. For more details, please feel free to contact our company.

Company：エクセリ
Price：10,000 yen-100,000 yen

Other network tools
Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

60MHz Band 3-Element Yagi Antenna 3DV-0608A

A 3-element Yagi antenna for municipal disaster prevention administrative radio that can be used for both transmission and reception.

The 3DV-0608A (3DV0608A) is a 60MHz band 3-element Yagi antenna manufactured by Nippon Antenna. * The Yagi antenna is a type of antenna consisting of three rods of different lengths, functioning as a director, driven element, and reflector, which provides high directivity. It was invented in 1926. * This is a 3-element Yagi antenna suitable for both transmission and reception, designed for municipal disaster prevention administrative radio use. * It is a typical unidirectional antenna mainly composed of an antenna, reflector element, and director element. * The appearance is simple, with the supply section and element blanket molded from reinforced resin. * It operates at a specified frequency within the 54-75MHz range, with model numbers varying by frequency band. - 3DV-0608A 55-66MHz - 3DV-0608A 68.2-69.8MHz Additionally, please specify the center frequency (fo) in MHz when placing your order. * The connector is NJ. * The compatible antenna mounting bracket is F-1 (round)-K(D). * For more details, please feel free to contact us.

Company：エクセリ
Price：100,000 yen-500,000 yen

Other network tools
Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

60MHz Band 3-Element Yagi Antenna 3DV-0608

A 3-element Yagi antenna for municipal disaster prevention administrative radio that can be used for both transmission and reception.

The 3DV-0608 (3DV0608) is a 60MHz band 3-element Yagi antenna manufactured by Nippon Antenna. *The Yagi antenna is a type of antenna consisting of three rods of different lengths, where the shorter rod acts as a director, the middle rod as a driven element, and the longest rod as a reflector, resulting in a highly directional antenna. It was invented in 1926. *This is a 3-element Yagi antenna suitable for both transmission and reception, designed for municipal disaster prevention administrative radio communications. It is an antenna for radio equipment operating in the 60MHz band. *It operates at a specified frequency within the range of 54-75MHz. The model number changes depending on the frequency band. - 3DV-0608 55-66MHz - 3DV-0608 68.2-69.8MHz When placing an order, please specify the center frequency (fo) in MHz. *It is a typical unidirectional antenna primarily composed of an antenna, reflector element, and director element. *The appearance is simple, and the supply section and element blanket are molded with reinforced resin. *The connector is NJ. *The compatible antenna mounting brackets are C-31(B) and C-19(C). *For more details, please feel free to contact us.

Company：エクセリ
Price：100,000 yen-500,000 yen

Other network tools
Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Ear-hook type earphone microphone EX-M210

Ear-hook type earphones with a microphone that are hard to fall out.

The EX-M210 (EXM210) is an ear-hook type earphone microphone manufactured by Exseli (EXSELI). It can be used with specific low-power transceivers and digital simple radios that have a 1-pin screw-in connector from Standard, Yaesu Musen, Alinco, and Icom. *Please note that it may not be compatible with some models. Please specify the model you intend to use when considering a purchase. It features a tie-pin type microphone with a clip that can be attached to your chest. It comes with an ear hook that makes it difficult to fall off from your ear. It can be used in both ears. The cable for the earphone part is made of a durable, stretchable coiled cord that is resistant to breakage. *For more details, please feel free to contact us.

Company：エクセリ
Price：Other

Other network tools
Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

400MHz Band 3-Element Yagi Antenna 3DV-450

A single directional 400MHz band 3-element Yagi antenna composed of an antenna, reflector element, and director element.

The 3DV-450 (3DV450) is a 400MHz band 3-element Yagi antenna manufactured by Nippon Antenna. *The Yagi antenna is a type of antenna consisting of three rods of different lengths, functioning as a director, driven element, and reflector, which provides high directivity. It was invented in 1926. *It is primarily a single-directional fixed station radio antenna composed of an antenna, reflector element, and director element. *It operates at a specified frequency within the range of 340 to 480MHz. The model number changes depending on the operating frequency. - 340 to 390MHz: 3DV-450 F=340-390 - 390 to 480MHz: 3DV-450 F=390-480 *Please specify the center frequency (fo/MHz) when placing your order. *The supply section and element blanket are molded with reinforced resin. *Due to its protruding type, it can be mounted with rear support. *The recommended mounting brackets for the antenna are C-14 or C-19(D). *For more details, please feel free to contact us.

Company：エクセリ
Price：10,000 yen-100,000 yen

Other network tools
Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

400MHz Band 8-Element Yagi Antenna 8DV-450

Single-directional 400MHz band 8-element Yagi antenna composed of an antenna, reflecting elements, and guiding elements.

The 8DV-450 (8DV450) is a 400MHz band 8-element Yagi antenna manufactured by Nippon Antenna. *The Yagi antenna is a type of antenna consisting of three rods of different lengths, which function as a director, driven element, and reflector, resulting in a highly directional antenna. It was invented in 1926. *It is primarily a single-directional fixed station radio antenna composed of an antenna, reflector elements, and guiding elements. *It operates at a specified frequency within the range of 340 to 480MHz. The model number changes based on the operating frequency. - 340-390MHz: 8DV-450 F=340-390 City - 390-480MHz: 8DV-450 F=390-480 City *Please specify the center frequency (fo/MHz) when placing your order. *The supply part and element blanket are molded with reinforced resin. *Due to its protruding type, it can be mounted with rear support. *The recommended mounting bracket for the antenna is C-36(G). *For more details, please feel free to contact us.

Company：エクセリ
Price：100,000 yen-500,000 yen

Other network tools
Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

400MHz Band 14-element Yagi Antenna 14DV-450

Single directional 400MHz band 14-element Yagi antenna composed of an antenna, reflecting elements, and guiding elements.

The 14DV-450 (12DV450) is a 14-element Yagi antenna manufactured by Nippon Antenna for the 400 MHz band. * The Yagi antenna consists of three rods of different lengths forming a single antenna, with the shorter rod serving as the director, the radiating element, and the reflector, making it a highly directional antenna. It was invented in 1926. * It is primarily an antenna for fixed station radios with a single directional pattern, composed mainly of the antenna, reflector elements, and director elements. * It operates at a specified frequency within the range of 340 to 480 MHz. Please specify the center frequency (fo/MHz) when placing your order. * The supply section and element blanket are molded with reinforced resin. * Due to its protruding type, it can be mounted with rear support. * The recommended mounting bracket for the antenna is F-26 (B2). * For more details, please feel free to contact us.

Company：エクセリ
Price：100,000 yen-500,000 yen

Other network tools
Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

400MHz Wideband 12-Element Yagi Antenna 12BD-4502

400MHz band fixed station radio antenna

The 12BD-4502 (12BD4502) is a 400MHz band wideband 12-element Yagi antenna manufactured by Nippon Antenna. *The Yagi antenna consists of three rods of different lengths that form a single antenna, with the shorter rod acting as a director, the middle rod as a radiator, and the longest rod as a reflector, resulting in a highly directional antenna. It was invented in 1926. *This antenna is for fixed station radio equipment. *The supported frequency range is 330 to 470MHz. Please specify the transmission frequency ft (MHz) and reception frequency fr (MHz) when placing your order. *It is used for sharing multiple frequencies with a single antenna. *The external matching type designed for weight reduction is a unique design by Nippon Antenna. *It offers stable workability and electrical performance. *It has a single-directional vertical or horizontal polarization. *The connector comes with an NJ connector. Please connect it to the radio equipment using a separately sold coaxial cable. The connector on the radio equipment side is sold separately, so please choose one that matches your radio equipment. *For more details, please feel free to contact us.

Company：エクセリ
Price：100,000 yen-500,000 yen

Other network tools
Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Transceiver Product List and Ranking from 142 Manufacturers, Suppliers and Companies | IPROS GMS

Transceiver Manufacturer, Suppliers and Company Rankings

Transceiver Product ranking