We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Transmitters.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Transmitters×ジョブル - List of Manufacturers, Suppliers, Companies and Products

Transmitters Product List

46～60 item / All 95 items

Displayed results
Ethernet Powerline Transmission Device VDL4000N

Ethernet Powerline Transmission Device VDL4000N

Transmit Ethernet and power (DC12V) over long distances with a single coaxial cable! The VDL4000N transmission device is effective for installing IP cameras and more!

The VDL4000N uses coaxial cable to transmit the Ethernet and power necessary for IP camera installation. - It supports Ethernet standards 10BASE-T/100BASE-TX, with a maximum bidirectional communication speed of 60 Mbps. - For 5C-FB cables, it can supply DC12V 1A at 800m and 2.5A at 400m. - The power can also be used for devices other than cameras, allowing for the installation of infrared illuminators, sensors, microphones, etc. * It cannot be used with PoE-only cameras or cameras that require DC12V power. * The VDL4000N is not compatible with the VDL4000 (discontinued product).

  • Surveillance Camera System

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
2 audio + RS232C + RS485 + 2 contact signal optical fiber transmission device

2 audio + RS232C + RS485 + 2 contact signal optical fiber transmission device

Optical transmission device ADR222.L1x that enables bidirectional transmission of audio/serial/contact signals over a single optical fiber!

The ADR222.L1.x allows for bidirectional transmission of 2 audio signals + RS232C + RS485 + 2 contact signals over a single optical fiber. - The optical fiber can transmit up to 20 km in single mode and up to 2 km in multimode. - Transmission is achieved by using the ADR222.L1A (transmitter) and ADR222.L1B (receiver) in pairs. - Audio is digitally sampled at LINE level (unbalanced) at 96 kHz. - It has a wide operating temperature range of -20 to 75°C. - Up to 14 units can be housed in a 19-inch rack mount chassis "VAD-RACK-14-4U" for rack mounting installation. * The "ADR222.L1A" and "ADR222.L1B" are sold separately and not as a set.

  • Other security and surveillance systems
  • Other FA equipment
  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
10/100/1000M Ethernet optical fiber transmission device

10/100/1000M Ethernet optical fiber transmission device

VAD-SD001G.L1.xxx transmits 1 system Ethernet (10/100/1000M) over a single optical fiber up to 20 km.

VAD-SD001G.L1.xxx transmits a single Ethernet (10/100/1000M) signal up to 20 km away using a single optical fiber. The transmitted signal is not affected by electromagnetic waves generated by other devices or cables.

  • LAN construction and wiring work
  • Other PCs and OA equipment
  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Video + RS485 + UTC + Power Overlay Transmission Device VDS6702

Video + RS485 + UTC + Power Overlay Transmission Device VDS6702

The VDS6702 transmits video signals, control signals (RS48), power, and UTC signals over long distances using a single coaxial cable!

The VDS6702 is a transmission device that transmits one channel of video signal (AHD/HD-TVI/HDCVI/composite), one channel of RS485, UTC, and power over a single coaxial cable. The video signal is RF modulated, allowing for transmission that is resistant to noise. The power is transmitted as DC12V and can supply up to 2A at a distance of 300m.

  • Image Transmission Equipment
  • Surveillance Camera System
  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
HDMI 4K Compatible Optical Transmission Device HE01F-4K6G-KS

HDMI 4K Compatible Optical Transmission Device HE01F-4K6G-KS

HE01F-4K6G-KS that transmits HDMI (up to 4K) and USB/infrared remote control signals/RS232C (optional) via two optical fibers!

The HE01F-4K6G-KS is an optical transmission device that transmits HDMI (up to 4K) and USB/infrared remote control signals/RS232C (optional) via two optical fibers.

  • Other image-related equipment
  • Other security and surveillance systems
  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
4 Video + Control Signal Optical Transmission Device VAD-D403A.L1.x.235

4 Video + Control Signal Optical Transmission Device VAD-D403A.L1.x.235

Long-distance transmission of 4 video (composite) signals and 3 control signals over a single optical fiber! An optical fiber multiplexer that can be used in a temperature range of -20 to 75°C!

VAD-D403A.L1.T.235 /R.235 transmits four channels of composite video and RS232C/RS422/RS485 over a single optical fiber for long-distance multiplex transmission. The use of optical fiber for transmission supports long distances (up to 30 km) and is less susceptible to interference from surrounding noise sources. It enables transmission while maintaining signal quality in wiring across vast areas, long-distance wiring from remote locations, wiring in noisy factory environments, and wiring adjacent to power lines or signal lines that generate noise. Additionally, it can be used in a wide temperature range of -20 to 75°C. The optical fiber is single-mode, and the connection terminal is an ST connector. (Please consult us if a conversion connector is needed.)

  • Surveillance Camera System
  • Other image-related equipment
  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Composite Video and Audio Transceiver Set TTP111AV-K

Composite Video and Audio Transceiver Set TTP111AV-K

The TTP111AV-K transmits composite video and stereo audio (LINE) over a single LAN cable for long distances!

The TTP111AV-K transmits composite video and stereo audio (LINE) over a single LAN cable for long-distance transmission. The model TTP111AV-K is a set of two video + audio transmitters "TTP111AV," which can be easily connected at both ends of the LAN cable (RJ45) for transmission. The transmitter is a passive type and does not require a power supply.

  • Other security and surveillance systems
  • Surveillance Camera System
  • Other image-related equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
DVI-D Signal CAT5e Transmitter DE01ERK (No External Power Required)

DVI-D Signal CAT5e Transmitter DE01ERK (No External Power Required)

A compact type DVI transmitter that can extend DVI-D signals with a single LAN cable (no external power required)! Easy wiring and connection!

DVI Signal CAT5e Transmitter Compact Type - Transmits DVI-D (single link) over a single CAT5e/6/7 cable. *CAT6 or higher cables are recommended. - Maximum transmission distance is 50m for 1920x1200 and 70m for 1024x768. *For longer distances, the DVI-D long-distance transmitter DE02E (HDCP compatible) can transmit up to 100m. - Set includes DE01ET (PC side) and DE01ER (monitor side). - Both ends of the transmission cable use RJ45, allowing the use of commercially available LAN cables (straight wiring). - No external power supply required. *It operates on power supplied from the DVI port of the video output device, but depending on the connected device, the available power may be insufficient, resulting in a shorter transmission distance. In this case, connect using a USB to micro USB cable (sold separately) or connect a DC5V power adapter SWP051000-1S-PSE (sold separately) or LTE10UW-S1-BS33 (sold separately) to the included micro USB conversion cable.

  • Image Transmission Equipment
  • Other PCs and OA equipment
  • Other security and surveillance systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
24-channel signal optical transmission device VAD-D0024R.L1.xx

24-channel signal optical transmission device VAD-D0024R.L1.xx

Long-distance transmission of powered/unpowered contact signals up to the 24 system using a single optical fiber! 19-inch rack-mounted optical multiplex transmission device in 1U size!

- Long-distance transmission of contact signals from 24 system sensors, switches, etc., using a single optical fiber. - Transmission with VAD-D0024R.L1.TU (transmitter) and VAD-D0024R.L1.RU (receiver). - Capable of transmitting up to 3 km with multimode optical fiber and up to 20 km with single-mode optical fiber. - Usable in a wide temperature range of -20°C to 75°C. - 19-inch rack mount, 1U size. - Compatible with AC 100-240V. - Blocks EMI, RFI, crosstalk, and ground loops.

  • Sensors
  • Other security and surveillance systems
  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
DVI-D Signal CAT5e Long Distance Transmitter DE02E

DVI-D Signal CAT5e Long Distance Transmitter DE02E

The DE02E (HDCP compatible) can transmit DVI-D signals up to 100m with a single LAN cable!

The DE02E can transmit DVI-D signals over LAN cables up to 100 meters. It can connect PC or DVR video to monitors located at a distance. - Transmits DVI-D (single link) signals up to 100 meters using CAT5e/6/6a/7 UTP/STP cables (CAT6 cables or higher recommended) - Both ends of the transmission cable use RJ45, allowing for commercially available LAN cables (straight wiring) - Maximum resolution: 1920x1200 - Supports HDCP 1.4

  • Image Transmission Equipment
  • Other security and surveillance systems
  • Other PCs and OA equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
PoE Plus compatible IP long-distance coaxial transmitter IPC-600P

PoE Plus compatible IP long-distance coaxial transmitter IPC-600P

IPC-600P allows for transmission of PoE/PoE Plus Ethernet over coaxial cable up to 600m without any relay!

The IPC-600P can transmit PoE/PoE Plus Ethernet over coaxial cable up to 600m. Additionally, it achieves a communication speed of up to 100Mbps in the direction from the camera to the Ethernet switch (monitor side), allowing for smooth transmission of high-resolution IP camera footage with large data volumes. Furthermore, by connecting a camera-specific switch SW105 or a DC56V power adapter to the IPC-600P-T on the monitor side, it is also possible to supply up to 25.5W (5C-2V 100m) to the camera. This is effective for connecting IP cameras in remote locations such as outdoors or for upgrading from existing analog cameras to IP cameras.

  • LAN construction and wiring work
  • Surveillance Camera System
  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
HDMI CAT5e Transmitter (with Loop Output) HE03

HDMI CAT5e Transmitter (with Loop Output) HE03

HE03 can transmit HDMI up to 150m without relay using a LAN cable! It also features a loop output function!

The HE03 transmits HDMI signals over LAN cables (CAT5e/6/7 UTP/STP 24AWG) for long distances. The maximum supported resolution is 1080p 60Hz and 1920✕1200 60Hz. The HE03T (transmitter) can loop output the HDMI input signal, allowing video display on a local monitor without using a splitter near the HDMI output device. Package contents: HE03T x1, HE03R x1, power adapter x2.

  • Image Transmission Equipment
  • Other security and surveillance systems
  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
HDMI CAT5e Mini Transmitter HE01ERK

HDMI CAT5e Mini Transmitter HE01ERK

Compact HDMI transmitter (no external power required) that can extend HDMI signals over LAN cables HE01ERK!

The HE01ERK transmits HDMI signals over LAN cables up to 40m (1920x1200p). It is convenient for displaying PC video or DVR footage on a monitor located a short distance away. - Transmits HDMI (up to 1920x1200p) using a single CAT5e/6 LAN cable (CAT6 or higher recommended). *For longer distance transmission, the HE03 (HDCP compatible) can transmit up to 150m. - Both ends of the transmission cable use RJ45, allowing for commercially available LAN cables (straight wiring). - Operates on power supplied from the HDMI port. - Sends built-in EDID to HDMI output devices. - Not HDCP compatible. - The HE01SET (transmitter) and HE01SER (receiver) set includes a DC jack to micro USB conversion cable. *If the input HDMI signal level is low, the transmission distance may be shorter. *The power for this device is supplied from the HDMI port of the video output device. If the supplied power is insufficient for normal operation, please provide power to the HE01SET using a USB or a separately sold DC 5V power adapter (LTE10UW-S1-BS33).

  • Image Transmission Equipment
  • Other security and surveillance systems
  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
4-system PoE/PoE Plus compatible Ethernet long-distance coaxial transmission device

4-system PoE/PoE Plus compatible Ethernet long-distance coaxial transmission device

Transmission device VDL5130 capable of long-distance transmission of up to 4 Ethernet signals (compatible with PoE/PoE Plus) over a single coaxial cable!

- In standard Ethernet, the maximum transmission distance is up to 100m, but it can be extended up to 600m (using 5C-2V or higher) without inserting repeaters or other devices. - It transmits the Ethernet and power (PoE) necessary for installing IP cameras using existing coaxial cables. - Up to 4 cameras (RU/R) can be connected to one network device (LU). - Using 5C-2V, it achieves a maximum bidirectional communication speed of 100Mbps over a distance of up to 600m. - It incorporates TVS/GDT (surge absorbers/varistors) in the link cable connection terminals to protect the devices from surges.

  • Surveillance Camera System

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
EPoC Series IP Long-Distance Coaxial Transmission Device with PoE Plus Support

EPoC Series IP Long-Distance Coaxial Transmission Device with PoE Plus Support

Long-distance transmission of Ethernet and Power over Ethernet (PoE) up to 1,200 meters using coaxial cable! Usable in locations such as overhead wiring and underground installation!

The EPoC series is a PoE Plus compatible IP long-distance coaxial cable transmission device that can transmit Ethernet and power (PoE) over a single coaxial cable for long distances. It extends the transmission distance, which is limited to 100m with standard Ethernet, up to 1,200m (using 5C-2V or higher) without the need for repeaters or other devices in between. We offer not only indoor models but also outdoor transmission devices that are waterproof and equipped with lightning protection. 【Features】 ■ Achieves long-distance Ethernet transmission at a lower cost than fiber optics ■ Flexible and free system construction with a rich lineup of products ■ Supports the introduction of new systems utilizing existing wiring and equipment *For more details, please refer to the PDF materials or feel free to contact us.

  • Surveillance Camera System
  • LAN construction and wiring work
  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.