We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Transmitters.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Transmitters×ジョブル - List of Manufacturers, Suppliers, Companies and Products

Transmitters Product List

1～15 item / All 95 items

Displayed results
Video Signal UTP (LAN Cable) Compact Transmitter TTP111VE

Video Signal UTP (LAN Cable) Compact Transmitter TTP111VE

Compact size allows for multiple installations in tight spaces! Twisted pair video transmission equipment capable of transmitting up to 300m (no power supply needed)!

The twisted pair video transmitter can transmit camera images and other data using UTP cables such as LAN cables. It is thinner and more flexible than coaxial cable wiring, making installation easier. The passive type twisted pair transmitter does not require power and can transmit color video up to 300 meters. The TTP111VE converts composite video output (BNC) into a signal for twisted pair or converts a twisted pair signal back into a composite video signal (dual-purpose for both transmission and reception). The twisted pair side has a terminal block, allowing any twisted pair cable to be connected for use. It is compact and can be connected side by side in areas where multiple BNC terminals, such as DVRs, are densely packed.

  • Image Transmission Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Ethernet Optical Transmission Device VAD-SD001E.L2.TRC

Ethernet Optical Transmission Device VAD-SD001E.L2.TRC

Long-distance transmission without degradation is possible! Ethernet optical fiber transmission device VAD-SD001E.L2.TRC!

The 10/100M Ethernet signal is transmitted over long distances using optical fiber. Transmission using optical fiber supports long-distance transmission (up to 20 km) and is less susceptible to interference from surrounding noise sources. It enables wiring in vast areas, long-distance wiring from remote locations, wiring in noisy factory environments, and wiring adjacent to power lines or signal lines that generate noise, all while maintaining signal quality. Additionally, since transmission does not use electricity, wiring near devices that are easily affected by electromagnetic interference does not introduce noise. Optical fiber supports single-mode/multi-mode, and the connection terminal is an SC connector. (Please consult us if conversion connectors or other accessories are needed.) The VAD-SD001E.L2.TRC transmits a single channel of 10/100M Ethernet over two single-mode optical fibers for a maximum distance of 20 km, and over two multi-mode optical fibers for a maximum distance of 2 km. It is effective for LAN connections with remote locations. Two VAD-SD001E.L2.TRC units are used in opposition for transmission.

  • Surveillance Camera System
  • LAN construction and wiring work
  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Ethernet Optical Transmission Device VAD-SD001E.L1.xxx

Ethernet Optical Transmission Device VAD-SD001E.L1.xxx

Long-distance transmission without degradation is possible! Ethernet optical fiber transmission device VAD-SD001E.L1.xxx with an operating temperature range of 0°C to 70°C!

The 10/100M Ethernet signal is transmitted over optical fiber for long distances. Transmission using optical fiber supports long-distance transmission (up to 20 km) and has the characteristic of being less affected by surrounding noise sources. It enables transmission while maintaining signal quality for wiring in vast areas, long-distance wiring from remote locations, wiring in noisy factories, and wiring adjacent to power lines or signal lines that generate noise. Furthermore, since it does not use electricity for transmission, it does not introduce noise even when wired near devices that are easily affected by electromagnetic interference. The VAD-SD001E.L1.xxx transmits a single channel of 10/100M Ethernet over single-mode optical fiber for up to 20 km and over multi-mode optical fiber for up to 2 km, making it effective for LAN connections to distant locations. It operates within a temperature range of 0°C to 70°C, making it suitable for operation in harsh environments.

  • Surveillance Camera System
  • LAN construction and wiring work
  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
8-channel signal optical fiber transmission device VAD-D008R.L1.x

8-channel signal optical fiber transmission device VAD-D008R.L1.x

Long-distance transmission without signal degradation is possible! 8-point signal transmission device VAD-D008R.L1.x using a single optical fiber cable!

Transmission using optical fiber supports long-distance transmission (up to 30 km) and has the characteristic of being less affected by surrounding noise sources. It allows for wiring in vast areas, long-distance wiring from remote locations, wiring in noisy factory environments, and wiring adjacent to power lines or signal lines that generate noise, all while maintaining signal quality. Additionally, since transmission does not use electricity, it does not introduce noise even when wired near devices that are susceptible to electromagnetic interference. Optical fiber cables can be connected in single-mode or multi-mode, with ST connectors as the terminal. (Various conversion connectors are also available.) The VAD-D008R.L1.x transmits 8 channels of voltage/non-voltage contacts over single-mode fiber up to 30 km and multi-mode fiber up to 3 km. At the transmission destination, it outputs signals via non-voltage contact signals (relay output). Being card-type, it can be housed in a standalone installation case for installation in control panels, or it can be used in combination with multiple card types housed in a 19-inch rack mount chassis. (Optional)

  • Surveillance Camera System
  • others
  • Remote Control

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
VGA over CAT5e long-distance transmitter TTA111VGA

VGA over CAT5e long-distance transmitter TTA111VGA

TTA111VGA can transmit VGA (analog RGB) up to 300 meters with a single CAT5e/6 cable!

- Transmits VGA (analog RGB) up to 300m with a single CAT5e/6 cable - Maximum resolution is 1600✕1200 at 85Hz - Includes TTA111VGA-T (PC side), TTA111VGA-R (monitor side), and power adapter - Both ends of the transmission cable use RJ45, allowing for commercially available LAN cables (straight wiring) to be used (install the included distance adjustment adapter at the midpoint and end of the wiring to accommodate length differences between UTPs.) * If you cannot install the distance adjustment adapter in the wiring or if color misalignment persists even after installation, please use a cable where all four pairs are of the same length or use the high-performance receiver VE02DALS with color misalignment correction function on the monitor side. (You can also specify the combination of TTA111VGA-T (transmitter) + VE02DALS (high-performance receiver) when ordering.) * If the resolution used is 1920✕1200 at 60Hz, please use the combination of VE02ALT (transmitter) + VE02DALS (receiver).

  • Other PCs and OA equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
HDMI HDBaseT Long Distance Transmitter HE02E

HDMI HDBaseT Long Distance Transmitter HE02E

4K compatible long-distance transmitter HE02E that can transmit HDMI signals up to 100 meters using LAN cables!

The HE02E transmits HDMI signals over LAN cables up to 100 meters. It can connect game consoles and Blu-ray players to AV amplifiers/HD TVs located at a distance. - Transmits HDMI over CAT5e/6/6a/7 UTP/STP cables up to 100 meters (CAT6 or higher recommended) - Includes HE02ET (transmitter), HE02ER (receiver), and power adapter - Both ends of the transmission cable can use commercially available LAN cables (straight wiring) with RJ45 connectors - Supports HDMI 1.4, capable of transmitting 3D and 4K at 30Hz - Compatible with HDCP 2.2/1.4 - Compliant with HDBaseT * Please use CAT6 or higher cables when displaying video at 1080p 60Hz or higher. * If utilizing the transmission performance of HDMI 1.4 (10.2Gbps), please use CAT6a or higher cables.

  • Other PCs and OA equipment
  • Other security and surveillance systems
  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
HDMI CAT5e Transmitter HE01S

HDMI CAT5e Transmitter HE01S

HE01S transmits HDMI signals up to 40m (1080p) via LAN cable!

The HDMI CAT5e transmitter HE01S transmits 1080p video over LAN cables up to 40m (60m for 720P/1080i). It is ideal for transmitting video to large monitors, signage displays, and projectors located away from the equipment. Since LAN cables can be used for transmission, wiring is easy. Just connect the RJ45 connector and the transmitter after wiring, and you're done!

  • Image Transmission Equipment
  • Other security and surveillance systems
  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
VGA (Analog RGB) CAT5e Transmitter VE01P

VGA (Analog RGB) CAT5e Transmitter VE01P

Power-free VGA (Analog RGB) LAN cable transmitter VE01P!

- Transmits VGA (analog RGB) up to 100m using a single CAT5e/6 cable. - Maximum transmission distance varies depending on VGA resolution: 640✕480/800✕600: 100m, 1024✕768: 75m, 1280✕1024: 60m. - Passive type, no power supply required. - Built-in virtual DDC in the transmitter to avoid misrecognition of display resolution/frequency. - Set includes VE01P-T (transmitter) and VE01P-R (receiver). - Both ends of the transmission cable use RJ45, compatible with commercially available LAN cables (straight wiring). - Sync mode setting switch (transmitter). - Sync deviation correction due to signal delay during transmission (receiver). * VE01P (= TTP111VGA) does not use power for simple transmission, so color distortion or ghosting may occur depending on the transmitted signal and operating environment. When displaying text or graphics on a PC screen, the above noise may be more noticeable, so the use of sets like VE02ALT and VE02DALS is recommended.

  • Other PCs and OA equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
HDMI Coaxial Cable Transmitter (Extended Support) HE01C

HDMI Coaxial Cable Transmitter (Extended Support) HE01C

Transmit HDMI signals with a single coaxial cable! HE01C supports re-extension as well!

- Transmits HDMI video and audio signals over a single coaxial cable. - Can transmit 1080p at 60Hz up to 70m using a 5C-FB cable. (720p, 1080i, and 1080p at 30Hz can be transmitted up to 150m.) - Supported resolutions are 480i, 576i, 720p, 1080i, and 1080p. - Includes one transmitter, one receiver, and two power adapters. - Daisy chaining for further extension is possible (requires an additional HE01CR). - Supports HDMI 7.1CH audio (only LPCM). - Compatible with HDMI 1.3. * Does not support transmission of signals other than video and audio. * Does not support HDCP. * The included receiver HE01CR is only one unit. An additional HE01CR (sold separately) is required for further extension.

  • Image Transmission Equipment
  • Other security and surveillance systems
  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
PoE Plus compatible IP coaxial transmitter Mini-Power

PoE Plus compatible IP coaxial transmitter Mini-Power

Mini-Power, a PoE Plus compatible IP coaxial cable transmitter that transmits Ethernet up to 300m over coaxial cable!

PoE/PoE Plus Ethernet is transmitted using coaxial cables. The transmission distance of standard PoE Ethernet can be extended from the usual 100m to a maximum of 300m. Since it transmits by connecting at both ends of the transmission cable, it can be used in places where relay devices cannot be installed, such as overhead wiring or underground burial. By using PoE Plus (IEEE802.3at) switches or injectors, it can supply up to 14W of power to receiving devices such as IP cameras. The operating temperature range is wide, from -10 to 60°C, allowing it to be used in harsh temperature environments.

  • LAN construction and wiring work
  • Surveillance Camera System
  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
HDMI and Infrared HDBaseT Transmitter HE02EI

HDMI and Infrared HDBaseT Transmitter HE02EI

4K compatible transmitter HE02EI that transmits HDMI signals and infrared remote control signals up to 70 meters with a single LAN cable!

The HE02EI is an HDMI transmitter that extends HDMI and infrared remote control signals up to 70 meters (1080p/60Hz CAT6a) using a single LAN cable. It can display content from gaming consoles, Blu-ray players, and HD television video on AV amplifiers or HD televisions located at a distance. The direction of infrared transmission can be switched between "transmitter to receiver" or "receiver to transmitter."

  • Image Transmission Equipment
  • Other security and surveillance systems
  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
SDI/RS485/Power Composite Coaxial Cable Transmitter SDIVPD

SDI/RS485/Power Composite Coaxial Cable Transmitter SDIVPD

HD-SDI signal + RS485 + power can be extended up to 300m without relay using a single coaxial cable transmitter SDIVPD!

The SDIVPD extends HD-SDI signals up to 300 meters using a single coaxial cable (when using 5C-FB). It also allows for the combined transmission of camera power and RS485 signals. It can supply up to 2A of DC12V power to the camera, making it effective for connecting to cameras with relatively high power consumption.

  • Image Transmission Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
USB2.0 CAT5e Transmitter UE03

USB2.0 CAT5e Transmitter UE03

USB 2.0 extender UE03 that extends up to 60m using CAT5e/6 cable!

- Transmits USB over CAT5e/6 cable up to 60m. - Supports USB 2.0 (High-Speed) and USB 1.1 (Low-Speed/Full-Speed). - Transmits between UE03T (USB device side) and UE03R (PC side). - UE03T (USB device side) has a 4-port USB hub function. - UE03R (PC side) receives power from the USB port, so no power adapter is needed. - Supports imaging devices such as printers and USB cameras, in addition to mice and keyboards. - This is a set of UE03T, UE03R, and a power adapter (for UE03T).

  • Other security and surveillance systems
  • Other PCs and OA equipment
  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
AHD/Composite Compatible Power Overlay Transmission Device VDS6200

AHD/Composite Compatible Power Overlay Transmission Device VDS6200

VDS6200, which transmits AHD or composite video signals and camera power over long distances using a single coaxial cable!

- A single coaxial cable, whether existing or newly installed, transmits AHD or composite (NTSC/PAL) video signals along with camera power in a superimposed manner. - AHD supports 720p and 1080p, allowing for the transmission of high-resolution HD quality video. - With a 5C-FB cable, power transmission of DC12V 1A is possible up to 800m, and 1.5A up to 500m. - With a 5C-2V cable, power transmission is possible up to 600m (0.9A), and with a 3C-2V cable, up to 300m (0.8A). - Modulating and transmitting AHD/composite video is also effective for noise countermeasures in cases where noise occurs during normal transmission. - The power can be used for devices other than the camera, allowing for the installation of DC12V equipment.

  • Image Transmission Equipment
  • Surveillance Camera System
  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Analog HD compatible camera 2 video + 2 power overlay transmission device VDS6500A

Analog HD compatible camera 2 video + 2 power overlay transmission device VDS6500A

Analog HD compatible camera with easy modification/addition of existing cameras, featuring 2 video + 2 power overlay transmission device VDS6500A!

The VDS6500A is a camera transmission device that can transmit 2-channel video signals, power, and UTC signals over long distances using a single coaxial cable. It supports four types of video signals: AHD, HD-TVI, HDCVI, and Composite (NTSC/PAL). Each of the two channels is compatible with UTC (Up-the-Coax), allowing for individual control of two cameras. * CH1 and CH2 can each accept different video signals (mixed signals are possible). * UTC is not compatible with all cameras. If you are using it for the first time, please contact us in advance. - Long-distance multiplex transmission of 2-channel video signals, power, and UTC signals using a single coaxial cable. - Power supply of up to 4A total at DC12V is possible (maximum 2.5A individually). - Easy modification/addition of existing cameras. - Mixed video signals can be transmitted. - RF modulation transmission is resistant to noise. * The VDS6500A is not compatible with the VDS6500 (discontinued product).

  • Image Transmission Equipment
  • Surveillance Camera System
  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.