Last Updated： Aggregation Period:Nov 05, 2025～Dec 02, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Nov 05, 2025～Dec 02, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Nov 05, 2025～Dec 02, 2025
This ranking is based on the number of page views on our site.
106～120 item / All 172 items
Cassette transport system
The tilt mechanism allows for smooth cassette transport without wafer misalignment, and it can be customized to accommodate various cassette specifications. It is compatible with both batch and branch processing equipment.
450mm wafer transport system
It can be used for high-speed transport of 450mm wafers. By using a traveling axis, we propose strokes according to the number of ports in the cassette. Adopting AC servo motors, it transports at high speed and high precision through optimized motion trajectories. Bernoulli chucks can be installed (optional). The Z-axis (elevation axis) can accommodate up to 500mm. By employing a traveling axis, it can access 4 FOUPs (450mm wafers) at high speed. Load capacity: Equivalent to 5kgf at the third joint of the arm (including chuck and workpiece). The use of a twin arm reduces wafer exchange time. The wall-mounted traveling axis achieves a low pass line. It is equipped with a motion monitor. Control method: RS232C and parallel photo I/O. S-curve acceleration and deceleration control allows for high-speed, high-precision transport of wafers. It can accommodate optimal chucks tailored to the transported items and equipment layout. Chuck materials can be various, including CFRP, aluminum, and ceramics. It uses AC servo motors with built-in absolute encoders on all axes.
Leave the system design to Schmalz. We provide consistent support from design to implementation!
Schmalz Co., Ltd. is launching an unprecedented new service that not only provides vacuum equipment but also takes on the design, development, and installation of vacuum conveying systems as a whole. Dedicated engineers will visit the site to design and develop the optimal conveying system. The system, which condenses Schmalz's vacuum conveying know-how and unique technology, will enhance conveying efficiency and contribute to reducing running costs through energy savings. *When making inquiries, it would be helpful if you could fill out and send the "Inquiry Sheet" included with the catalog for a smoother response.
![[Case Study of Industrial Equipment Introduction] Sample Inspection Transport System](https://image.mono.ipros.com/public/product/image/f5b/2000705724/IPROS82540022037814270332.png?w=280&h=280)
Introduction to a system that performs necessary processes such as centrifugation and sample dispensing on the collected specimens!
We would like to introduce a case where motors manufactured by Citizen Micro Co., Ltd. were implemented into a specimen inspection transport system. The specimen inspection transport system performs necessary processing (such as centrifugation and specimen dispensing) on the collected specimens and automatically feeds them into the corresponding analysis machines. Our motors are used in the stopper drive mechanism that adjusts the intervals for transporting specimens. [Overview] ■ Product with motor implementation: Specimen inspection transport system ■ Role: Used in the stopper drive mechanism that adjusts the intervals for transporting specimens *For more details, please refer to the PDF document or feel free to contact us.
![[Case Study of Engineering Collaboration System Solution Implementation] Automation of Parts Transportation](https://image.mono.ipros.com/public/product/image/e6c/2000854640/IPROS10481179438357406819.png?w=280&h=280)
Reduce working hours! Achieve automation of parts transportation by integrating ISM and AGV systems.
We would like to introduce a case where the introduction of an inter-engineering collaboration system solution enabled automatic transportation using AGVs. The customer's concerns included "the burden on workers is significant due to the warehouses being far apart" and "manual labor is required for transporting parts." After implementation, we received feedback such as, "We were able to reduce work hours, allowing workers to engage in other tasks." [Implementation Example] ■ Step count for workers during picking operations - Before: 1,527,040 steps/month - After: 572,640 steps/month (60% reduction) *For more details, please refer to the PDF document or feel free to contact us.
A conveying system capable of high precision, low cost, and long-distance, high-speed, and vertical transportation.
★Energy Saving★ The wire used in the wired drive conveyor is significantly lighter compared to the conventional timing belt method, allowing for excellent energy-saving effects when transporting the same load over the same stroke.
![Wired drive transport system [Medium load transport type for up to 200 kg]](https://image.mono.ipros.com/public/product/image/159/320927003/IPROS_15830264088539652000.jpg?w=280&h=280)
It is ideal for transporting large substrates, glass, etc.
What is a wire drive system? It is a transport system that uses a durable wire drive unit.
Ideal for changing the layout of multipurpose halls!
This system is a heavy load transport system that forms an air film by blowing air from a blower through small holes in a multi-hole sheet, allowing for the easy movement of heavy objects. It can overcome gaps and steps that are difficult for air bearings, and it exerts its power on weak flooring such as wooden floors by supporting the load over a wide area. Additionally, the blower power supply is either 100V or 200V, so no special electrical equipment is required. 【Features】 ■ Gaps and steps are acceptable ■ Low floor burden ■ No scratches *For more details, please contact us or download the catalog.
![[Improvement Case] Increased Productivity and Safety](https://image.mono.ipros.com/public/product/image/8bf/2001023597/IPROS06629791621282144065.png?w=280&h=280)
Streamlining operations to improve productivity! A case where the risk of work-related falls was eliminated and safety was enhanced.
We would like to introduce a case study of the implementation of a rail-type mold transport system with a 20-ton capacity at an automotive-related manufacturer. In a site where large workpieces were being transported by crane, there was a long waiting time for the crane, and there was also a risk of the workpieces falling from the ceiling while being suspended during transport. By introducing an AGV (Automated Guided Vehicle), we achieved labor savings and improved productivity. Additionally, by transporting at ground level and eliminating the need for cranes, we eliminated the possibility of workpieces falling, thereby enhancing safety. 【Case Overview】 ■ Challenges - Long waiting times for the crane - Risk of workpieces falling from the ceiling while being suspended during transport ■ Results - Achieved labor savings and improved productivity - Enhanced safety by eliminating the possibility of workpieces falling through ground-level transport and achieving crane-less operation *For more details, please refer to the related links or feel free to contact us.
Introducing our transportation system that allows you to obtain high-quality ice without the worry of core ice.
The "Flight Conveyor Device" is a transport system that allows for first-in, first-out ice handling without any base ice. By advancing the floor-mounted flight conveyor, the entire ice storage is moved forward, allowing for ice to be discharged. The discharge rake installed at the discharge point evenly scrapes the ice from the entire surface of the ice storage, resulting in well-shaped ice with minimal crushed ice, thus producing high-quality ice. 【Features】 ■ Advances the entire ice storage to discharge ice ■ Evenly scrapes the ice from the entire surface of the ice storage with the discharge rake ■ Produces well-shaped ice ■ Minimal crushed ice *For more details, please refer to the PDF document or feel free to contact us.
Introducing our transport system suitable for short-term ice storage (approximately 10 to 20 days).
The "V Flap Device" is a transport system suitable for compact and small-space automatic conveyance. The walls of the ice storage chamber are inclined at a V-shape through hydraulic operation, allowing the ice collected in the center to be crushed by a crusher and conveyed by a lower discharge screw. It is suitable for short-term ice storage (approximately 10 to 20 days), and there is no bottom ice at all. 【Features】 ■ Compact ■ Suitable for automatic conveyance in small spaces ■ Conveyed by the lower discharge screw ■ No bottom ice at all *For more details, please refer to the PDF materials or feel free to contact us.
To ensure mass supply of products, high-speed production is essential. HepcoMotion enables acceleration in the assembly, inspection, and packaging processes.
1. HepcoMotion GFX Guidance System - For Beckhoff XTS System HepcoMotion, a linear motion manufacturer, has developed a special version of the PRT2 and 1-Trak guidance systems in collaboration with Beckhoff, Germany, to support the Beckhoff XTS system. The Beckhoff XTS system uses linear motor technology to drive independently controlled movers on a track. This provides solutions for high-speed motion profiles at 4 m/s without sacrificing positional accuracy. The system integrates Hepco's patented 1-Trak guidance system with lightweight movers, offering smooth movement to Beckhoff's 180° motor module. 2. HepcoMotion DTS Drive Track System DTS is a pre-assembled unit that provides the ability to drive movers continuously or intermittently on Hepco curves/track circuits. 3. HepcoMotion DTS 2 Track System An evolved version of DTS, enabling constant-speed drive in straight and curved sections.
![hepcomotion-dts2-scroll-driven-track-system-01[1].jpg](https://image.mono.ipros.com/public/product/image_sub/f22/398187/IPROS21776087470177893499.jpeg?w=280&h=280){kind=small}
![hepcomotion-dts2-scroll-driven-track-system-02[1].jpg](https://image.mono.ipros.com/public/product/image_sub/ebc/398189/IPROS32897860471227405020.jpeg?w=280&h=280){kind=small}
The DTS+ transport system is suitable for high-load, vertical applications that require free space within curved circuits.
【New!】In the new design for April 2025, the connection between the carriage and the belt has been integrated, resulting in a uniform height for attaching fixtures and equipment to the carriage assembly. With an expanded selection of drive shaft diameters, the options for drive configurations have increased for each system size. Additionally, the 44-612 system equipped with Ø40mm bearings and the 76-799 system have been added to the lineup. The DTS+ transport system incorporates key features from Hepco Motion's curved PRT track system and the original DTS, with the carriage firmly connected to the drive belt. The connected carriage does not detach from the belt, allowing for greater driving force transmission compared to the original DTS conveyor system. While the original DTS is suitable for many applications, the DTS+ is ideal for high-load, vertical applications, or when equipment needs to be integrated into available space within the track circuit, which required caution with the original DTS.
We will introduce examples of conveyor transport system production.
We have newly developed it to accommodate both pallet and roll packaging. From lightweight to heavy item transportation, including roller conveyors and belt conveyors. We manufacture and provide a wide range of conveyors for the food, automotive, and logistics industries.
![[Case Study] Pipe High-Frequency Device Transport System](https://image.mono.ipros.com/public/product/image/a6a/2000893610/IPROS92732270171104390459.png?w=280&h=280)
Introduction of a pipe high-frequency device transportation system featuring transportation + high-frequency input + stacked storage!
We would like to introduce a case study of the implementation of the "Pipe High-Frequency Device Conveying System" at Company T in Gifu Prefecture. Pipes arranged in a stocker are taken out two at a time using inward-opening claws and conveyed to a conveyor with a feeding device (manufactured in-house). The feeding hand then transfers them to a high-frequency annealing device (manufactured by Yoshida Machinery) for high-frequency hardening, after which they are returned to the conveyor. After cooling and conveying, a robot retrieves the pipes and stacks them in the stocker. Due to the round shape of the pipes, it was necessary to stack the second row of pipes between the first row, and because the pipes did not have perfect roundness, teaching and correction were required. 【Case Overview】 ■ Implementation Location: Company T, Gifu Prefecture ■ Type and Model of Robot ・FANUC M20Ia ・Conveying + High-Frequency Feeding + Stocker Stacking *For more details, please refer to the related links or feel free to contact us.
