Last Updated： Aggregation Period:Feb 18, 2026～Mar 17, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Feb 18, 2026～Mar 17, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Feb 18, 2026～Mar 17, 2026
This ranking is based on the number of page views on our site.
31～60 item / All 432 items
The SKS precision vise is made from SKS material and undergoes sub-zero treatment, resulting in a high-precision precision vise with minimal aging changes.
SKS precision vise with distortion prevention feature
The new design's clamping structure allows the jaw to be moved while the vice remains on the table.
It is a precision vice that adopts a patented new design and robust construction, capable of gripping workpieces very securely.
High-precision precision vise using a hydraulic mechanism.
The precision hydraulic vice can increase the maximum clamping pressure up to 1,500 kg using a hydraulic mechanism.
The SKS precision vise is made from SKS material and undergoes sub-zero treatment, resulting in a high-precision vise with minimal aging changes.
The vice handle tilts down and does not interfere with the tool.
High-precision precision vice made of Japanese tool steel SK material.
A precision vice that is tightened with a hex wrench. Since it has no handle, the handle does not get in the way during processing.
High-precision precision vise made of Japanese-made tool steel SK material.
● A precision vise that is tightened with a hex wrench. There is no handle, so it won't get in the way during processing. ● The jaw has a step for thin workpieces.
The SK Precision Sign Vice is a high-precision sign vice made from Japanese tool steel SK material.
● Use gauge blocks to set accurate angles. ● Please obtain the necessary gauge blocks from the trigonometric table (gauge blocks are not included, so please prepare them separately).
The SK precision vise is a high-precision precision vise made from Japanese tool steel SK material.
Since it is a type that tightens with a handle, it allows for easy attachment and detachment of the workpiece.
The SK Precision Sign Vice is a high-precision sign vice made from Japanese tool steel SK material.
● Use gauge blocks to set accurate angles. ● Please obtain the necessary gauge blocks from the trigonometric table (gauge blocks are not included, so please prepare them separately).
The two-dimensional precision vise can rotate 360° horizontally and tilt 45° vertically.
● The scale allows for easy setting to the desired angle. ● Can rotate 360° horizontally and tilt 45° vertically. ● Minimum vernier scale: 5 minutes.
The large two-dimensional precision vise can rotate 360° horizontally and tilt 45° vertically.
● The angle can be easily read using the main scale and the vernier scale. ● It can rotate 360° horizontally and tilt 45° vertically. ● Minimum vernier scale division: 5 minutes. ● The vice section uses a wedge lock type vice. It is a precision vice designed with a robust design that can firmly grip the workpiece.
You can attach EROWA's centering plate and System3R's macro base holder to the bottom of the vice.
Compatible with EROWA's centering plate 100M8 (ER-011599) and System-3R's macro base holder (3R-651/7E-P).
You can attach the EROWA company's centering plate and the System3R company's macro base holder to the bottom of the vice.
Compatible with EROWA's centering plate 50 (ER-009214) and System-3R's macro base holder (3R-651.7E-P).
A wire cutting vice that can be adjusted up and down, left and right, and front and back, with a 0.5mm clearance to avoid interference with the wire guide section after adjustment.
● The lower limit stopper is removable. ● Heat treatment: vacuum hardening and sub-zero treatment.
A wire cutting vise that can be adjusted up and down, left and right, and front and back, with a 0.5mm clearance to avoid interference with the wire guide section after adjustment.
● The lower limit stopper is removable. ● Heat treatment: vacuum hardening and sub-zero treatment.
Stainless steel wire cutting vise with leveling and parallel adjustment features, equipped with anti-lifting functionality.
●Heat treatment: vacuum hardening and sub-zero treatment
Stainless steel wire cutting vise with leveling and parallel adjustment features, equipped with anti-lifting functionality.
●Heat treatment: Vacuum hardening and sub-zero treatment
Wire cut vice that can be adjusted on the X, Y, and Z axes with a hex wrench when used in combination with a leveling base.
Heat treatment: vacuum hardening
Clamp type down-hold wire cutting vise
●Heat treatment: vacuum hardening and sub-zero treatment
A wire cut vise that can clamp two works simultaneously.
●Heat treatment: Vacuum hardening and sub-zero treatment
Wire cut vice ideal for small work clamps.
Heat treatment: vacuum hardening
Ideal wire cutting vice for small work clamps.
Heat treatment: vacuum hardening
Prevents the workpiece from lifting due to the 45° lockdown method.
●Heat treatment: Vacuum hardening and sub-zero treatment
EROWA products that can automate metal processing, compatible with System 3R products!
This is a precision vise set up with an EROWA-made centering plate and a System 3R-made macro palette. Since it will be delivered after setup, you can use the vise immediately from the day it arrives (installation of chuck plugs and other components may be required). It is compatible not only with precision vises but also with self-centering vises.
![Magvice [Permanent Magnetic Clamping Block for Cutting] ECB Series](https://image.mono.ipros.com/public/product/image/43b/2001249501/IPROS10814938072576547026.jpg?w=280&h=280)
Significant improvement in productivity through machining with permanent magnet clamping blocks that allow simultaneous processing of five sides and reduction of setup time!
A permanent magnet clamping block is a powerful permanent magnet type magnetic chuck that can be used for cutting processes. 【Features】 ■ A cutting magnetic chuck that uses very strong neodymium magnets. ■ Easy ON/OFF control of magnetic force with lever operation. ■ The main body can be connected, allowing for handling of large workpieces. ■ By operating the magnetic force switching lever at the front of the connected body, you can control the ON/OFF of all connected magnetic forces. ■ Once the magnetic flux is fully engaged with the workpiece, the magnetic flux does not appear on the surface of the workpiece, preventing chips from being attracted to the surface due to magnetic force. ■ By using an induction block (magnetic flux conductor), it can accommodate various shapes of workpieces. ■ Using a distortion removal block, it is also possible to remove the scale from distorted workpieces. *For more details, please refer to the PDF document or feel free to contact us. We can also bring a demo unit to your location for test machining.
We offer a variety of vices including ultra-precision vices with almost zero lift, stainless steel vices, sign vices, 2D vices, and 3D vices!
We would like to introduce our "Precision Vices" that we handle. We offer a diverse lineup of products, including the "Self-Centering Vice," which excels in gripping power and repeatability, and the "2D Precision Vice," which can rotate 360° horizontally and tilt 45° vertically. Parallel specifications are also available. Customization is possible. 【Features】 ■ Double wedge type ultra-precision vice: An ultra-precision vice that keeps the fixed jaw's tilt to 1μm. ■ Stainless steel vices: Available in various sizes from ultra-compact to large. ■ Steel vices: Available in various types from low-cost SK material to high-durability SKS material. ■ Various types available, including sign vices, 2D vices, and 3D vices. *For more details, please download the PDF or feel free to contact us.
A variety of products are lined up, including wire cut clamps and adjustable wire cut pallets!
We would like to introduce the "Wire Cut Vise" that we handle. We offer various types of clamping methods, so we believe you can choose one that is suitable for your use from our many products. Additionally, the splitting table operates manually, allowing for splitting at 15-degree increments and fixing at any angle. We also provide various options for workpiece fixation. 【Features】 ■ Wire Cut Vise - SUS440, fully hardened, polished ■ Splitting table for wire cutting - SUS440 - Protection rating IP68 *For more details, please download the PDF or feel free to contact us.
Repeat accuracy within ±0.01mm! A lineup of three products with different mouth opening widths.
We would like to introduce our "Thin Self-Centering Vise for 5-Axis Machining." The jaw part features a serrated design, providing excellent gripping power and repeatability. The material consists of S50C for the jaw and FCD60 for the base. Please contact us if you have any inquiries. 【Details】 ■Features: The jaw part has a serrated design, offering superior gripping power and repeatability in a self-centering vise. ■Material: S50C for the jaw, FCD60 for the base. ■Tightening Torque: 15kN (60N/m when tightened). ■Repeatability: Within ±0.01mm. ■Inspection report included. *For more details, please download the PDF or feel free to contact us.
Adopting a unique 1.5° swing on one side of the mouthpiece significantly enhances grip strength.
The "Fast Grip Self-Centering Vice" is a practical product that can be used for a wide range of applications, including 3-axis vertical, 4-axis horizontal, and 5-axis machining centers. Simple and smart. It is fundamentally composed of eight parts, with the design of each individual component simplified, and the basic shape determined by its function. The jaws can be easily exchanged with minimal lift-off. Additionally, the swing-type jaws have improved gripping power. Center fine adjustment is possible after spindle replacement. 【Features】 ■ The jaws can be easily flipped 180 degrees for quick expansion of the clamping range. ■ The jaws adopt a 1.5° swing on one side, significantly enhancing gripping power. ■ A special angle locking mechanism prevents workpieces from lifting. ■ Unique fine adjustment center mechanism allows for easy center adjustment. ■ Repeatability: 0.005mm *For more details, please download the PDF or feel free to contact us.
A design that allows for smooth discharge of cutting powder and cutting fluid! High precision, strong grip, reversible nozzle.
We offer the "Fasgrip Self-Centering Vice" with a jaw width of 75mm, which features a special angle locking mechanism that prevents workpieces from lifting. The swing-type jaws enhance gripping power, and fine adjustments to the center can be made after spindle replacement. It is fundamentally composed of eight parts, with the design of each individual component simplified, and the basic shape determined by functionality. This generates benefits in terms of maintainability, operability, and flexibility. 【Features】 ■ The jaws can be easily flipped 180 degrees for quick expansion of the clamping range. ■ Adopting jaws that swing 1.5° on one side significantly improves gripping power. ■ The special angle locking mechanism prevents workpieces from lifting. ■ The unique fine adjustment center mechanism makes center adjustments easy. ■ Repetitive accuracy: 0.005mm *For more details, please download the PDF or feel free to contact us.
