Last Updated： Aggregation Period:Jun 03, 2026～Jun 30, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jun 03, 2026～Jun 30, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jun 03, 2026～Jun 30, 2026
This ranking is based on the number of page views on our site.
901～930 item / All 2475 items
1.0mm to 0.8mm conversion adapter expanded to DC to 130GHz.
[Overview] This is a conversion from a 1.0mm W connector to a 0.8mm connector. [Features] The usable frequency range has been extended up to 130 GHz.
DC to 145GHz wideband 0.8mm to 0.8mm conversion adapter
[Overview] This is a conversion from a 0.8mm connector to a 0.8mm connector. [Features] The operating frequency range is a wideband design up to 145GHz.
Easily and reliably connect the current loop and RS-232C interface at a low cost.
●Supports 60mA current loop (passive type) ●Signal logic polarity can be switched ●Data transmission speed up to 9600bps ●DTE/DCE switchable on the RS-232C side ●Can be powered by the included AC adapter or DC 5V input ●RoHS compliant <Standard Components> ・Converter body: 1 unit ・AC adapter: 1 unit ・User manual: 1 copy
Easily and cost-effectively connect RS-422 and RS-232C.
● Level conversion for 4 signal lines (Transmission: 2 / Reception: 2) ● Communication distance of up to 1.2 km (RS-422 side) ● Maximum data transmission speed of 250 kbps ● DTE/DCE switchable on the RS-232C side ● Termination resistors (100 ohm, 1/2W) selectable for each signal line ● Can be powered by the included AC adapter or DC 5V input ● Compliant with RoHS directive <Standard Components> ・ Converter main unit: 1 unit ・ AC adapter: 1 unit ・ Instruction manual: 1 copy
Easy and low-cost connection of parallel (centronic) and serial (RS-232C).
● Equipped with communication error check function. ● Selection of flow control (hardware/character). ● Maximum data transmission speed of 38400 bps. ● Switchable between DTE/DCE for RS-232C. ● RoHS compliant. <Standard components> ・ Converter main unit: 1 unit ・ AC adapter: 1 unit ・ Instruction manual: 1 copy
3000V high voltage signal insulation specification
The SI-55USB (USB<=>RS-232C converter) is a USB converter developed for factory automation applications with an insulation withstand voltage of 3000Vdc, surge protection ESD 15KV, and an operating temperature range of -10 to 55 degrees. ● Easily converts serial communication to USB (Full Speed) ● Low power consumption design for USB bus-powered operation ● Compact metal housing measuring 65(W)x95(D)x22(H)mm; DIN rail mounting is also possible ● Insulation withstand voltage of 3000Vdc / Surge protection ESD 15KV for factory automation specifications ● Compliant with RoHS directives ● Supports high-speed communication at 1Mbps ● Compatible with Windows 2000/XP/Vista/7 ● Standard components include converter/USB cable (1.8m)/utility CD/user manual
3000V high voltage signal insulation specification
The SI-35USB (USB<=>RS-422/485 converter) is a USB converter developed for factory automation applications with an insulation withstand voltage of 3000Vdc, surge protection ESD 15KV, and an operating temperature range of -10 to 55 degrees. ● Easily converts serial communication to USB (Full Speed) ● Low power consumption design for USB bus-powered operation ● Compact metal housing measuring 65(W)x90(D)x22(H)mm, also suitable for DIN rail mounting ● Insulation withstand voltage of 3000Vdc/surge protection ESD 15KV for factory automation specifications ● Compliant with RoHS directive ● Supports high-speed communication up to 3Mbps ● Automatic/manual control of RS-485 driver ● RS-485 line monitoring function ● Compatible with Windows 2000/XP/Vista/7 ● Standard components include converter/USB cable (1.8m)/utility CD/user manual
It is an interface converter designed for energy-saving and environmentally friendly use on Earth.
The SI-60F/SI-60/SI-65/SI-65A is an interface converter that allows FA devices and measuring instruments with only RS-232C/RS-422/RS-485 serial communication ports to connect to a LAN network. It automatically detects and connects to 10Base-T/100Base-TX. It supports many LAN protocols such as TCP/IP and UDP/IP. It can operate in harsh FA environments with temperatures ranging from -10 to 50°C (SI-65A operates from -25 to 75°C). 【Features】 ○ Robust and noise-resistant compact metal housing ○ Options available for DIN rail mounting or wall mounting ○ Environmentally friendly low power consumption design, compliant with RoHS directives ○ Provides a configuration utility software convenient for multiple installations For more details, please contact us or download the catalog.
Significant miniaturization of conventional USB⇔RS-422/RS-485 converters.
- Our product SI-35USB has been miniaturized to 80% of its size to meet space-saving requirements. - Achieves industry-leading 3000Vdc signal isolation voltage. - Capable of USB bus-powered operation, eliminating the need for an external power supply. - Comes with a virtual COM port driver compatible with Windows 10. - Operates in a temperature range of -20 to 60 °C, suitable for harsh environments. - Features a robust and noise-resistant compact metal housing. - Offers various mounting options including 35mm DIN rail, wall mounting, and magnets. - Designed with low power consumption in consideration of the environment. - Supports high-speed communication from 300bps to a maximum of 3Mbps. - Enables automatic control of RS-485 drivers and DTR/RTS line control. - Monitors the usage of the RS-485 line and allows flow control via the CTS line. - Can connect up to 128 devices using the RS-485 multi-drop method. - Supports long-distance transmission of over 1.2Km, leveraging the features of RS-422/485.
Serial and Ethernet communication adapter for FA applications.
It is specialized for FA (Factory Automation) applications. 1. Stable operation even in unstable power environments. 2. Operating temperature guarantee: 0°C to 70°C (SE01). 3. Serial two-channel specification. One channel each for RS-422/485 and RS-232C, capable of simultaneous two-channel operation. 4. Supports high-speed serial communication. RS-422/485 supports up to 921.6 kbps, RS-232C supports up to 230.4 kbps. 5. Isolation specification. Implements a completely isolated type DC/DC power supply. 6. Long-term stable supply. 7. Compliant with VCCII class A. Passes various noise tests and environmental tests (IEC 61000 series, JIS 0704, etc.). 8. Diverse communication modes. Supports various communication modes such as UDP mode, TCP client mode, TCP server mode, and multi-mode.
ArcNet/Ethernet and RS-232C communication adapter for FA applications
1. Easy setup 2. High speed 10 Mbps, ArcNet compatible 3. Industry-standard isolated media transceiver (HYC4000) specifications Possible to build ArcNet with commercially available HUBs 4. Isolation specifications: Implemented with a fully isolated DC/DC power supply 5. Long-term stable supply 6. Compliant with VCCII class A, cleared various noise tests and environmental tests (IEC/EN 61000-JIS 0704, etc.) 7. Can also be used as a communication adapter for RS-232C and ArcNet
3G/4G compatible! Voice communication system that requires no computer and allows for easy connection.
"LAN de Talk Plus (LT03/LT04)" is an instant voice communication system that requires no computer and allows for easy connection using Ethernet. You can make simple calls anywhere there is Ethernet, whether through the internet, 3G, 4G communication, ISDN lines, or internal LANs. Additionally, by using "LAN de Talk Mix," simultaneous calls with up to 16 people are possible. We have conducted environmental tests under even stricter humidity conditions of 95% for approximately 1,000 hours and have successfully cleared them. 【Features】 ■ Designed for industrial applications ■ Compatible with low-speed lines ■ Supports 3G and 4G communication ■ Equipped with 2 LAN ports ■ Compliant with RoHS directives For more details, please refer to the catalog or feel free to contact us.
Measurement of high-damping materials and high-scattering materials is possible! It can generate ultrasonic waves several times to hundreds of times more than commercially available flaw detectors and probes.
The "LFA11" is a low-frequency adapter that connects to commercially available ultrasonic flaw detectors, thickness gauges, and pulser-receivers, significantly improving low-frequency characteristics. It extends the low-frequency characteristics of commercial devices up to 30 kHz, enabling measurements of high-damping and high-scattering materials. It operates on four AA batteries, making it convenient for field use. It allows for the measurement of materials that are difficult to measure with conventional general-purpose devices, such as 1m thick concrete, 50cm insulating bricks, 50cm CC composites, and 10cm cork. 【Features】 - Capable of measuring high-damping and high-scattering materials - Convenient for field use as it operates on four AA batteries - Enables measurement of materials that are difficult to measure with conventional general-purpose devices - Compatible with all of our low-frequency active probes *For more details, please refer to the PDF document or feel free to contact us.
Providing essential adapters for high-pressure piping! A wide variety to meet various applications!
We offer a wide variety of "adapters" from Autoclave, which provide all the components necessary for high-pressure piping. They are suitable for various applications such as Speedbite, medium pressure cone & thread, and high pressure cone & thread. *For more details, please refer to the PDF document or feel free to contact us.
Supports analog HD! USB 2.0 output conversion adapter with a resolution of 1280×720.
The "MS-PVM25AU-HD/FH" is a USB2.0 output conversion adapter that supports analog HD. It has low power consumption and excellent cost performance. The signal input method is compatible with analog HD. 【Features】 ■ 47.4(W)×76(D)×26(H)mm ■ Analog HD input (FH: 1920×1080, HD: 1280×720) ■ Power overlay ON/OFF ■ USB2.0 I/F ■ Excellent cost performance type ■ Can be connected to MS-M104HDA, MS-M213FHA, MS-404HDA, MS-403FHA, MS-163FHA/HDA, MS-200FHAVN/VS, MS-200HDAVN/VS *For more details, please refer to the PDF document or feel free to contact us.
Supports analog HD! Output conversion adapter with a resolution of 1920×1080 and compact size.
The "MS-TR213AUD" is a USB2.0 YUV8bit digital output conversion adapter that supports analog HD. It features low power consumption and excellent cost performance. It has a compact size of 32(H)×40(W)mm. 【Features】 ■ Compact size of 32(H)×40(W)mm ■ Analog HD input ■ YUV8bit digital output ■ USB2.0 interface ■ Resolution of 1920×1080 ■ Low power consumption ■ DC+12V ■ Excellent cost performance type ■ Compatible with MS-M213FHA, MS-404FHA, MS-183FHA, MS-163FHA, MS-200FHAVN/VS *For more details, please refer to the PDF document or feel free to contact us.
Conversion adapter
Coaxial connector - This is a conversion adapter for coaxial connectors and triple coaxial connectors.
![[Problem Solving Case] Pitch Conversion Adapter](https://image.mono.ipros.com/public/product/image/4cc/2001503929/IPROS78349843531622306344.png?w=280&h=280)
An example of connecting different pitches through a pitch conversion adapter linked by a pattern!
We would like to introduce a case study regarding the problem-solving of the "pitch conversion adapter" that we handled. The customer company had an issue where their standard module did not match the pitch of the customer's circuit board. We resolved the issue by connecting different pitches through a pitch conversion adapter connected via patterns. 【Case Overview】 ■ Customer's Concern - Their standard module does not match the pitch of the customer's circuit board. ■ Solution - Connected different pitches through a pitch conversion adapter connected via patterns. *For more details, please download the PDF or feel free to contact us.
![[Problem Solving Case] SMT Conversion Adapter](https://image.mono.ipros.com/public/product/image/413/2001503932/IPROS39276812336088411411.png?w=280&h=280)
An adapter composed of a substrate material (CEM-3) that is resistant to high-temperature reflow and pin terminals for SMT implementation!
We would like to introduce a case study regarding the problem-solving of the "SMT conversion adapter" that we handled. The customer company faced the issue of not having SMT specifications for the discrete components they were using and wanted to eliminate the need for additional solder. We resolved the issue by creating an adapter composed of a base made from high-temperature reflow-resistant substrate material (CEM-3) and pin terminals for SMT conversion. 【Case Overview】 ■ Customer's Concerns - There are no SMT specifications for the discrete components being used. - They want to eliminate additional solder. ■ Solution - SMT conversion using an adapter composed of a base made from high-temperature reflow-resistant substrate material (CEM-3) and pin terminals. *For more details, please download the PDF or feel free to contact us.
I will enlarge the PG screw.
LAPP's PG screw expansion adapter, SKINDICHT EKU & ME.
I will reduce the M screw.
LAPP manufactured M screw reduction adapter SKINDICHT KU-M & MR-M
Converting PG screws to M screws.
The LAPP SKINDICHT MA-PG/M is a screw conversion adapter with a PG thread on the outside and an M thread on the inside, allowing the use of an M thread cable gland in a PG threaded hole.
Connecting optical fibers/connectors of different standards to effectively utilize existing environments and achieve distance extension.
The "GPNET mdc series" can connect optical fibers of different standards, including APF, HPCF, multi-mode, and single-mode. It operates at DC 10Mbps for low-speed serial communication. With a combination of optical fibers and connectors, it can be used in 28 different conversion patterns. Furthermore, it allows for the interconnection of different standard optical fibers, enabling the utilization of existing fibers. 【Features】 - Capable of converting between four types of optical fibers: APF/HPCF/multi-mode/single-mode - 28 different conversion patterns available through combinations of optical fibers and connectors - Operates at DC 10Mbps for low-speed serial communication - Can extend optical communication distances as an optical repeater - Enables the interconnection of different standard optical fibers, allowing for the use of existing fibers *For more details, please refer to the PDF document or feel free to contact us.
Leave the medical standard certified AC adapters to Unifive! We provide stable supply with proven results and unmatched responsiveness in the industry. Custom solutions available!
This is an AC adapter for medical devices of the 6W type. The output specification for this model is 5V/1A. The AC pin is type A. It is a compact AC adapter with a small case size, making it an ideal model for powering medical devices. Universal type. - Compact type - High efficiency - Model for medical devices - DoE Level VI - Immunity standard EN55011 - Noise standard VCCI Class B, CE CISPR32 Class B - Short circuit protection - Overcurrent protection - Overvoltage protection
Leave the medical standard certified AC adapters to Unifive! We ensure stable supply with proven results and unmatched responsiveness in the industry. Custom solutions available!
This is an AC adapter for 6W medical devices. The output specifications of this model are 6V/0.5A. The AC pin is of the round two-pin type. It is a compact AC adapter with a small case size, making it an ideal model for powering medical devices. Universal type. - Compact type - High efficiency - Model for medical devices - DoE Level VI - Immunity standard EN55011 - Noise standard VCCI Class B, CE CISPR32 Class B - Short circuit protection - Overcurrent protection - Overvoltage protection
Leave your medical device AC adapter needs to Unifive! We ensure stable supply with proven results and unmatched responsiveness in the industry. Custom solutions available!
This is an AC adapter for medical devices of the 8W type. It is a compact AC adapter with a small case size, making it an optimal model for powering medical equipment. Universal type. - Small type - High efficiency - Model for medical devices - Compliant with CoC V Tier2 - Immunity standard EN55011 - Noise standards VCCI Class B, CE CISPR11 Class B, KN32, KN36 - Short-circuit protection - Overcurrent protection - Overvoltage protection
Leave your medical device AC adapter needs to Unifive! We ensure stable supply with proven results and unmatched responsiveness in the industry. Custom solutions available!
This is an AC adapter for medical devices of the 8W type. It is a compact AC adapter with a small case size, making it an ideal model for powering medical equipment. Universal type. (UM Series) : Compact type : High efficiency : Model for medical devices : Compliant with CoC V Tier2 : Immunity standard EN55011 : Noise standards VCCI Class B, CE CISPR11 Class B, KN32, KN36 : Short-circuit protection function : Overcurrent protection function : Overvoltage protection function
Leave the AC adapters for medical devices to Unifive! We ensure stable supply with proven results and industry-leading responsiveness. Custom solutions available!
This is an AC adapter for medical devices of the 8W type. It is a compact AC adapter with a small case size, making it an ideal model for powering medical equipment. Universal type. (UM Series) : Compact type : High efficiency : Model for medical devices : Compliant with CoC V Tier2 : Immunity standard EN55011 : Noise standards VCCI Class B, CE CISPR11 Class B, KN32, KN36 : Short circuit protection function : Overcurrent protection function : Overvoltage protection function
