antenna Product List and Ranking from 35 Manufacturers, Suppliers and Companies

Digital Simple Radio Registration Station Antenna - Antenna SRH350DR

An antenna designed for handheld digital simple registration stations in the 351MHz frequency band that is less likely to get in the way when attached in a short type.

The "SRH350DR" is a handheld rod antenna for 351MHz band digital simple radio, manufactured by Daiichi Denpa Kogyo. It can be used with handheld 351MHz digital simple radio registered stations from Icom, Alinco, JVC Kenwood, Standard, Yaesu, and Motorola. Since it is a rod antenna that can adjust its length, it can be compactly shrunk for easy transport when not in use. At maximum extension, it reaches 43cm, allowing for extended communication range. At its shortest retraction, it measures 16cm. No mounting screws are required; it can be easily attached by simply rotating it clockwise. 【Compatible Models】 Digital Simple Registered Stations - DJ-DPX2 - MiT3000 - DJ-PX31 - IC-D70 - IC-DPR7S - TCP-D551 - TPZ-D553 - VXD30 - VXD450R 【Features】 ■ For handheld type ■ Compactly extendable rod antenna ■ SMA-P connector ■ Easy to install For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. *For more details, please feel free to contact us.

Company：エクセリ
Price：Less than 10,000 yen

Other network tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

GPS-compatible building antenna AH-38

Mobile and indoor antenna for satellite communication transceiver IC-SAT100 that can use GPS location information management and satellite communication functions.

The "AH-38" is an external antenna manufactured by Icom. It is a passive external antenna used for indoor operation when deploying the Icom satellite communication transceiver IC-SAT100/IC-SAT100M indoors or in vehicles. The antenna utilizes a passive design that excels in radio wave transmission speed, allowing for quick reception and transmission. It can be used for both GPS location information and calls using satellite communication via Iridium. When combined with the separately sold OPC-2113, it can be installed on the rooftop of a building for operation. The antenna part is waterproof, so it can be used without issues even in rainy weather. It is recommended for installation on buildings approximately 10m to 20m tall (2 to 6 stories). 【Compatible Models】 Satellite Communication Transceiver - IC-SAT100 【Features】 - Recommended for 2 to 6 story buildings - Quick communication is a feature of the passive antenna - Waterproof type - Compatible with GPS and satellite communication For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. *For more details, please feel free to contact us.

Company：エクセリ
Price：10,000 yen-100,000 yen

Other network tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

GPS Antenna "SV-A02"

GPS antenna required for using the dynamic management system iGPS7plusSV-S50 with the IP radio SV-2000.

The SV-A02 (SVA02) is a GPS antenna manufactured by Smart Wave Telecommunications (Tom Communications Industry). ● It is a GPS antenna for the IP radio SV-2000. ● It is necessary when using the dynamic management system iGPS7plusSV-S50 with the SV-2000. ● It receives GPS (Global Positioning System) signals. ● The cable length is approximately 5 meters. 【Other Features】 ■ Capable of receiving GPS (Global Positioning System) signals ■ Cable length approximately 5 meters 【Compatible Models】 IP Radios ・SV-1000 ・SV-2000 *For more details, please feel free to contact us.

Company：エクセリ
Price：Other

Other network tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Marine Base Station Antenna SE50

Marine high-gain 2-band non-radial antenna for base stations (repeater compatible)

The SE50 (SE-50) is a marine and base station ground plane antenna manufactured by Daiwa (Diamond). It is a high-gain dual-band non-radial antenna for the 144/430 MHz band (repeater compatible). *Non-radial refers to a type of radio communication antenna that does not require a ground connection. The antenna length is approximately 2 meters. Made of fiberglass, it has high tensile strength and elasticity, making it robust. The power input rating is 100W. It is D-STAR compatible. The connector is MJ. For extremely low-priced sales of earphone microphones, batteries, and more, please leave it to Excelli. *For more details, feel free to contact our company.

Company：エクセリ
Price：10,000 yen-100,000 yen

Other network tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Antenna for 150MHz band radio equipment WH-150-2H-09

150MHz band rooftop whip (hole-opening type)

The WH-150-2H-09 (WH1502H09) is a rooftop whip antenna (hole-mount type) manufactured by Nippon Antenna for the 150MHz band. It is an antenna for radios operating in the 150MHz band. This is a whip antenna that is mounted by drilling a hole. It is a product with an L-type connector for a mounting hole diameter of Φ43-45mm. * A whip antenna is defined as an antenna that has no directionality and can receive and transmit signals from any angle. The installation location is the car's rooftop. It features an L-type NJ connector. It is for a specified frequency within the 150MHz range. Please specify the fo (center frequency) in MHz when placing your order. This product complies with safety standards. It is made to order. Please inquire about the delivery time. Included accessories: 1 tightening ring, 1 tightening tool, and 1 instruction manual. There is also the WH-150-3HA-09 with a straight NJ connector that has a straight element and the WH-150-3HA-09 with a straight NJ connector that has an element bent at a 60-degree angle. For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. * For more details, please feel free to contact us.

Company：エクセリ
Price：10,000 yen-100,000 yen

Other network tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[For License Bureau] HMG-450-3-09EL 450-470MHz

High-gain element for licensed station magnetic antenna that can be used for digital simple radio license stations.

The HMG-450-3-09EL 450-470MHz is a high-gain element magnet antenna for licensed stations manufactured by Japan Antenna. It can be used as an antenna (capacitive grounded 3λ/4 whip antenna) for digital simple radio licensed stations. *A whip antenna is one that has no directionality and can receive and transmit signals from any angle. *λ (lambda) refers to wavelength. Please use it in combination with the separately sold mounting bases MG-BA3-09 (with coaxial cable 3D2V) and MG-BA5-09 (with coaxial cable 5D2V). The antenna element length is 48 cm, and the weight is 0.6 kg. The supported frequency range is 450MHz to 470MHz. It is the same product as the element of the high-gain whip antenna (magnet type) HMG-450-3B-09 for loop tops. Additionally, there is the HMG-450-3-09EL for a specified frequency within 350-470MHz and the HMG-450-3-09EL 350-370MHz for digital simple radio registered stations. *For more details, please feel free to contact us.

Company：エクセリ
Price：10,000 yen-100,000 yen

Other network tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Antenna for 400MHz band radio equipment WH-450-3H-09

Antenna for a 400MHz band radio device with hole-mount installation.

The WH-450-3H-09 (WH4503H09) is a rooftop whip antenna (hole-mount type) manufactured by Nippon Antenna for the 400MHz band. It is an antenna for radios operating in the 400MHz band. This is a whip antenna that is mounted by drilling a hole. The mounting hole diameter is φ23mm, and the thickness of the mounting plate is 15mm or less. The installation location is on the car's rooftop. * A whip antenna is one that has no directivity and can receive and transmit signals from any angle. It features an NJ connector. It is designed for a specific frequency within the 400MHz range. Please specify the fo (center frequency) in MHz when placing your order. This product complies with safety standards. It is made to order. Please inquire about the delivery time. Included accessories: 1 instruction manual. * For more details, please feel free to contact us.

Company：エクセリ
Price：10,000 yen-100,000 yen

Other network tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Designated frequency in the 150MHz band] HGW-150-1PN-09

150MHz 1/2λ element for radio equipment (NP type)

● The HGW-150-1PN-09 is a 150MHz 1/2λ element (NP type) manufactured by Japan Antenna. ● It is a λ/2 non-radial type antenna for radio equipment in the 150MHz band. ● The model number changes depending on the frequency. Please choose from the model numbers below. ・HGW-150-1PN-09 140-143: Frequency 140-143MHz ・HGW-150-1PN-09 143-146: Frequency 143-146MHz ・HGW-150-1PN-09 146-150: Frequency 146-150MHz ・HGW-150-1PN-09 150-155: Frequency 150-155MHz ・HGW-150-1PN-09 155-160: Frequency 155-160MHz ・HGW-150-1PN-09 160-165: Frequency 160-165MHz ・HGW-150-1PN-09 165-170: Frequency 165-170MHz ● It has an NP type connector. ● Please use it in combination with the separately sold NJ type base for installation. ● Since it is a specified frequency in the 150MHz band, please specify fo (center frequency) MHz when placing your order. *For more details, please feel free to contact us.

Company：エクセリ
Price：10,000 yen-100,000 yen

Other network tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Designated frequency within 145-170MHz] HG-1501

150 MHz band collinear antenna for radio equipment

●HG-1501 (HG1501) is a 150MHz band collinear antenna manufactured by Nippon Antenna. ●It is an antenna for radio equipment. ●It is designed for a specified frequency within 145-170MHz. Please specify the fo (center frequency) in MHz when placing your order. ●It has an NJ connector. ●This antenna has a high gain of 5.15dBi with multiple radiating elements (antenna elements). ●The radiating elements are covered with an FRP material, providing excellent waterproofing and strength. ●It is DC shorted to prevent damage to the radio equipment from induced lightning. ●Due to its lightweight design, it is easy to install at high locations. A separately sold mounting bracket is required. *For more details, please feel free to contact us.

Company：エクセリ
Price：100,000 yen-500,000 yen

Other network tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

150MHz Band Wideband 8-Element Yagi Antenna 8BD-1502

External type integrator compatible with the VHF band fixed station radio equipment for the 140MHz to 170MHz range, featuring a 150MHz wideband 8-element Yagi antenna.

The 8BD-1502 (8BD1502) is a wideband 8-element Yagi antenna manufactured by Nippon Antenna for the 150MHz band. *The Yagi antenna is a type of antenna consisting of three rods of different lengths, functioning as a director, driven element, and reflector, providing high directivity. It was invented in 1926. *This antenna is for fixed station radio equipment in the VHF band. *The compatible frequency range is from 140MHz to 170MHz. *When placing an order, please specify ft (transmission frequency, MHz) and fr (reception frequency, MHz). *It is used for sharing multiple frequencies with a single antenna. *The external matching type designed for weight reduction is a unique design by our company. *It offers stable workability and electrical performance. *When selecting antenna mounting brackets, please refer to the recommended bracket list below. *When selecting antenna mounting brackets, please choose the antenna mounting bracket F-1 (round)-K2C (set). *The connector is NJ. For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. *For more details, please feel free to contact our company.

Company：エクセリ
Price：100,000 yen-500,000 yen

Other network tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

260MHz Band Wideband 8-Element Yagi Antenna 8BD-2502

The arm, element, and bracket are made of stainless steel, making it a broadband 8-element Yagi antenna for municipal digital mobile communication system fixed stations with excellent strength.

The 8BD-2502 (8BD2502) is a wideband 8-element Yagi antenna manufactured by Nippon Antenna, designed for the 260 MHz band. * The Yagi antenna consists of three rods of different lengths that form a single antenna, with the shorter rod serving as a director, the middle rod as a driven element, and the longest rod as a reflector, resulting in a highly directional antenna. It was invented in 1926. * This is a wideband 8-element Yagi antenna for fixed stations in municipal digital mobile communication systems. * The supported frequency range is 260 to 275 MHz. * When ordering, please specify ft (transmission frequency, MHz) and fr (reception frequency, MHz). * The arms, elements, and brackets are made of stainless steel, providing excellent weather resistance and strength. * The feeding part is highly waterproof, ensuring stable performance. * The recommended antenna mounting hardware is F-1 (round)-KD (set), suitable for arm diameters of φ25 to φ38, adjustable band diameter range of φ300 to φ410, and upper mast diameter range of φ300 to φ389. * It comes with an NJ connector, which can be connected if the radio side connector is NP. For affordable sales of earphone microphones, batteries, and more, please leave it to Excelli. * For more details, please feel free to contact us.

Company：エクセリ
Price：100,000 yen-500,000 yen

Other network tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

8-element Yagi antenna 8BD-930 (33MSMA-P) set

SMAP type 8-element for MCA system advanced, usable for transmission and reception corresponding to 850MHz to 945MHz.

The 8BD-930(33MSMA-P) set is an 8-element MCA Advance SMAP type antenna manufactured by Nippon Antenna. It is a wideband 8-element Yagi antenna (without cover) 8BD-930 and a connection cable for MCA Advance (33m) 5D2V-NP-SMAP-33. Please be sure to connect and use the included cable 5D2V-NP-SMAP-33. This is an 8-element Yagi antenna mainly used for transmission and reception with MCA Advance. It supports frequencies from 850MHz to 945MHz. The internal feeding part is completely sealed and waterproof. This antenna is a single-directional Yagi antenna with wideband radiating elements, reflecting elements, and guiding elements, offering high gain and sharp directivity. Included accessories: - Feeding cable (30cm) ×1 - Connection cable for MCA Advance (33m) 5D2V-NP-SMAP-33 ×1. For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. For more details, please feel free to contact our company.

Company：エクセリ
Price：100,000 yen-500,000 yen

Other network tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

5-element Yagi antenna 5BD-930A (24MSMA-P) set

5-element SMAP-type cover for MCA system advanced, usable for transmission and reception corresponding to 850MHz to 945MHz.

The 5BD-930A (24MSMA-P) set is a cover-equipped 5-element MCA Advance SMAP type antenna manufactured by Nippon Antenna. This is a set product that includes the wideband 5-element Yagi antenna (with cover) 5BD-930A and the connection cable for MCA Advance (24m) 5D2V-NP-SMAP-24. *Please be sure to connect the included cable 5D2V-NP-SMAP-24 when using. This is a 5-element Yagi antenna mainly used for transmission and reception with MCA Advance. It supports frequencies from 850MHz to 945MHz. The antenna body is completely covered by a resin cover, making it waterproof and excellent in weather resistance. It has a lightweight design, making installation easy. This antenna is a wideband Yagi antenna with a single directional pattern, featuring radiating elements, reflecting elements, and guiding elements, providing high gain and sharp directivity. For extremely low-priced sales of earphone microphones, batteries, and more, please leave it to Excelli. *For more details, please feel free to contact us.

Company：エクセリ
Price：100,000 yen-500,000 yen

Other network tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Matsuyama Technical Works Co., Ltd. Company Profile

Matsuyama Technical Works is a group of engineers committed to quality and speed.

What we create are antenna components for cutting-edge communication devices, including "antennas built into mobile phones." With well-equipped facilities and experienced engineers, we respond to customer demands through speedy and high-quality parts manufacturing, while our team of engineers continuously pursues the forefront of technology. 【Product Introduction】 ■ Molding for electronic component encapsulation ■ Cutting housings for mobile devices and prototypes ■ Built-in antennas for mobile devices (LTE) ■ W-LAN antennas for mobile devices ■ Built-in antennas for mobile devices ■ Whip antennas 【Equipment】 All processes are managed in-house. ● CAD for mechanical component design ● CAD for electronic circuit design (for circuit diagram creation) ● Rotary molding machines ● Vertical molding machines ● Linear polarization measurement systems, etc. * We also offer equipment rental, environmental testing, and dimensional measurement services. * For more details, please refer to the PDF document or feel free to contact us.

Company：松山テクニカルワークス
Price：Other

antenna
Other electronic parts

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Technical Column] The Mechanism of Built-in Antennas

The characteristics of antennas, including built-in antennas, and the mechanism by which stable performance is achieved.

The optimal shape of an antenna varies depending on the frequency and application. The most efficient antenna is one that is half the length of the wavelength of the frequency being used. High-frequency waves, which are the source of radio waves, have the property of reversing polarity every half wavelength. Therefore, when the length of the antenna conductor exceeds half a wavelength, the transmission and reception of radio waves do not work well. By making the length of the antenna conductor half the wavelength of the frequency, the radio waves resonate with the antenna. By adjusting the length of the antenna according to the wavelength of the frequency, the antenna and the transmitted radio waves enter a resonant state, allowing maximum power to be radiated. Similarly, in a receiver, the received radio waves and the antenna enter a resonant state, enabling the capture of maximum power. [Content of the document] - About the transmission and reception of radio waves and the length of the antenna - About the basic shapes of antennas - About precautions for built-in antennas For details on the mechanism of built-in antennas and points to consider during design, please download the PDF or feel free to contact us.

Company：松山テクニカルワークス
Price：Other

switch

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

antenna Product List and Ranking from 35 Manufacturers, Suppliers and Companies

antenna Manufacturer, Suppliers and Company Rankings

antenna Product ranking