antenna Product List and Ranking from 90 Manufacturers, Suppliers and Companies

For FC-D301PLUS: TH-TX-0308

Short antenna for FC-D301PLUS

●TH-TX-0308 (THTX0308) is a short antenna manufactured by F.R.C. ●It is an antenna that can be used with digital simple radio registered stations (new wave compatible digital 82ch + reception-only 15ch for aerial use) such as the FC-D301PLUS. ●Being a short antenna at 7.1 cm in length, it won't be bothersome even when the radio is attached to your waist. ●This is the standard antenna included with the FC-D301PLUS main unit. It can be purchased as a replacement or for repair purposes. For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. *For more details, please feel free to contact us.

Company：エクセリ
Price：10,000 yen-100,000 yen

Other network tools
antenna

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

150MHz Band Lightning Rod Equipped 3-Stage Collinear Antenna 3CL-150

Three-stage collinear antenna with lightning rod at specified frequency within 140-170 MHz.

The 3CL-150 is a 150MHz band lightning rod-equipped three-stage collinear antenna manufactured by Nippon Antenna. * A collinear antenna is a high-gain antenna used for radio communication, commonly employed in the VHF to UHF range. * It is an antenna for VHF fixed station radios. * It operates within the specified frequency range of 140 to 170MHz. Please specify the center frequency (fo) in MHz when placing your order. * This is a vertical polarization high-gain antenna with dipole antennas arranged at 120° intervals around a steel pole or vertically above it. * A dipole antenna is an antenna that is half the wavelength (1/2λ) in length. It refers to an antenna that can transmit and receive radio waves in all horizontal directions when installed vertically. * The connector on the antenna side is an N-J type. * The antenna side connector is only N-J. It can be converted to other connectors using an extension coaxial cable. * This is an omnidirectional antenna with a lightning rod. * An omnidirectional antenna refers to an antenna that can transmit and receive radio waves from all directions. * The antenna mounting brackets compatible with this product are B-4 and B-8-1(D). * For more details, please feel free to contact our company.

Company：エクセリ
Price：500,000 yen-1 million yen

Other network tools
antenna

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

400MHz Band Collinear Antenna HG-4000

High-gain collinear antenna for the 400 MHz band with multi-stage radiation elements that excel in waterproofing and strength.

The HG-4000 (HG4000) is a 400MHz band collinear antenna manufactured by Nippon Antenna. * A collinear antenna is a high-gain antenna used for radio communication, commonly employed in the VHF to UHF frequency range. * It is an antenna for fixed station radios operating in the frequency range of 360MHz to 470MHz. * Since it is a specified frequency within 360 to 470MHz, please specify the fo (center frequency/MHz) when placing your order. * It is a high-gain antenna with a gain of 3.65dBi, featuring multiple stages of radiating elements. * The radiating elements are covered with an FRP material, providing excellent waterproofing and strength. * It is DC shorted to prevent damage to the radio equipment from induced lightning. * Its lightweight design makes it easy to install at high locations. * It comes with an NJ connector, and the feed cable is RG-8/U approximately 60cm long. * The antenna mounting bracket compatible with it is F-20(D). * For more details, please feel free to contact us.

Company：エクセリ
Price：10,000 yen-100,000 yen

Other network tools
antenna

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

260MHz Band Collinear Antenna HG-2502CD

A vertically polarized omnidirectional collinear antenna for the 260 MHz band, featuring robust and waterproof design due to special processing, with a multi-stage pole stacking type.

The HG-2502CD (HG2502CD) is a collinear antenna manufactured by Nippon Antenna, designed for the 260MHz band. *Collinear antennas are high-gain antennas used primarily for radio communication, commonly employed in the VHF to UHF range.* This antenna is intended for fixed station radio equipment operating in the frequency range of 260MHz to 275MHz. It is a vertically polarized omnidirectional antenna with a multi-stage pole stacking design. The radiating elements are completely sealed and robust, featuring a fiberglass cover due to special processing, which provides excellent waterproofing. It comes with an NJ connector, and the feed cable is RG-8/U, approximately 80cm long. The antenna mounting bracket compatible with this model is B-3-2. *For more details, please feel free to contact our company.*

Company：エクセリ
Price：100,000 yen-500,000 yen

Other network tools
antenna

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

260MHz Band Collinear Antenna HG-2501B

A vertically polarized omnidirectional collinear antenna in the 260 MHz band, featuring robust waterproof properties and a multi-stage pole stacking design due to special processing.

The HG-2501B (HG2501B) is a 260MHz band collinear antenna manufactured by Nippon Antenna. *Collinear antennas are high-gain antennas used for radio communication, primarily in the VHF to UHF frequency range.* This antenna is designed for fixed station radios operating in the frequency range of 260MHz to 275MHz. It is a vertically polarized omnidirectional antenna with a multi-stage pole stacking design. The radiating elements are completely sealed with a fiberglass cover due to special processing, making them robust and highly waterproof. It is shorted DC-wise to prevent damage to the radio equipment from induced lightning. The connector is an NJ type, and the feed cable is 8D-2V, approximately 80cm long. The antenna mounting bracket is compatible with A-1. *For more details, please feel free to contact us.*

Company：エクセリ
Price：100,000 yen-500,000 yen

Other network tools
antenna

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[260MHz Band Fixed Station Radio] HGK-2501B1

Collinear antenna with reflective elements for fixed station radio equipment operating at frequencies from 260 MHz to 275 MHz.

The HGK-2501B1 (HGK2501B1) is a collinear antenna with a reflective element manufactured by Nippon Antenna, designed for the 260 MHz band. * A collinear antenna is a high-gain antenna used primarily for radio communication, commonly employed in the VHF to UHF frequency range. * It is a directional antenna for fixed station radios operating in the frequency range of 260 MHz to 275 MHz. * By using a reflective element with a three-stage collinear antenna, it achieves directional characteristics. * This product is adjusted to have a front-to-back ratio of 20 dB at 180°. * It comes with an NJ connector, and the feed cable is 8D-2V, approximately 80 cm long. * The compatible mounting brackets are B-3-1 and B-8-2(B). * For more details, please feel free to contact our company.

Company：エクセリ
Price：100,000 yen-500,000 yen

Other network tools
antenna

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

400MHz Band Collinear Antenna HG-40010

High-gain collinear antenna for the 400 MHz band with multi-stage radiation elements that excel in waterproofing and strength.

The HG-40010 (HG40100) is a 400MHz band collinear antenna manufactured by Nippon Antenna. *Collinear antennas are high-gain antennas used for radio communication, primarily utilized in the VHF to UHF frequency ranges. *It operates at a specified frequency within the 360-470MHz range. The model number changes depending on the operating frequency. Please specify the fo (center frequency/MHz) when placing your order. - Specified frequency within 373-400MHz: HG-40010 373-400 City - Specified frequency within 400-470MHz: HG-40010 400-470 City *This antenna has a high gain of 10.15dB with multiple stages of radiating elements. *The radiating elements are covered with an FRP material, providing excellent waterproofing and strength. *It is DC shorted to prevent damage to the radio equipment from induced lightning. *Its lightweight design makes installation at high locations easy. *The connector is NJ, and the feeding cable is RG-8/U approximately 60cm long. *The antenna mounting bracket is compatible with B-3-2. *For more details, please feel free to contact us.

Company：エクセリ
Price：500,000 yen-1 million yen

Other network tools
antenna

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Vehicle-mounted 800/900MHz sleeve-type element SL-930P

A 1/2λ sleeve-type antenna that can be connected to an M-J type base for use as a vehicle-mounted 800/900MHz sleeve element (MP type).

The SL-930P (SL930P) is a vehicle-mounted sleeve-type element (MP type) manufactured by Nippon Antenna for 800/900MHz. * A sleeve antenna refers to a broadband 1/4 wavelength linear antenna that is used in an upward position. * It is an omnidirectional antenna. * It is a 1/2λ sleeve-type antenna. * The antenna length is approximately 46.5 cm. * It is a vehicle-mounted antenna for MCA radio, compatible with MCA advance frequencies (850–945MHz). * Please connect it with the separately sold M-J type base and connector. * For more details, please feel free to contact us.

Company：エクセリ
Price：10,000 yen-100,000 yen

Other network tools
antenna

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

150MHz Band 5-Element Sleeve Antenna 5SL-150

A 150 MHz band 5-element sleeve-type antenna equipped with a reflector and waveguide, featuring high gain and directivity.

The 5SL-150 (5SL150) is a 150MHz band 5-element sleeve-type antenna manufactured by Nippon Antenna. It is an antenna for fixed station VHF radios. It is a unidirectional antenna that transmits and receives radio waves from one direction. It operates at a specified frequency within the 140-170MHz range, with the model number changing depending on the frequency used. - Frequency range 149-175MHz: 5SL-150 F=149-175 specified. *Please specify the center frequency (fo/MHz) when placing your order. This sleeve antenna is equipped with a reflector and a waveguide to provide high gain and directivity, making it a vertically polarized directional antenna used for fixed stations. The sleeve completely prevents radio wave leakage to masts and other structures, ensuring stable performance. It comes with a waterproof sleeve, ensuring complete waterproofing of the feed point (connector area). The connector is NJ. The compatible antenna mounting brackets are B-3-1 (with B-3 adapter) and B-8-3(B). *For more details, please feel free to contact us.

Company：エクセリ
Price：100,000 yen-500,000 yen

Other network tools
antenna

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

150MHz Band 3-Element Sleeve Antenna 3SL-150

A 150 MHz band three-element sleeve antenna equipped with a reflector and a waveguide, featuring high gain and directivity.

The 3SL-150 (3SL150) is a 150MHz band 3-element sleeve antenna manufactured by Nippon Antenna. It is an antenna for fixed station VHF radios. It is a unidirectional antenna that transmits and receives radio waves from one direction. It operates at a specified frequency within the 140-170MHz range, with the model number changing based on the frequency used. - For the frequency range of 146-149MHz: 3SL-150 F=146-149 - For the frequency range of 149-175MHz: 3SL-150 F=149-175 *Please specify the center frequency (fo/MHz) when placing your order. The sleeve antenna is equipped with a reflector and a waveguide to provide high gain and directivity, making it a vertically polarized directional antenna used for fixed stations. The sleeve completely prevents radio wave leakage to masts and other structures, ensuring stable characteristics. A water bottle is included, providing excellent waterproofing for the feeding part (connector part). The connector is NJ. The compatible antenna mounting brackets are B-3 (with B-3 adapter) and B-8-3(C). *For more details, please feel free to contact us.

Company：エクセリ
Price：100,000 yen-500,000 yen

Other network tools
antenna

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Lightning rod equipped directional three-stage collinear antenna 3DA-150

150MHz band lightning rod equipped directional three-stage collinear antenna

The 3DA-150 (3DA150) is a directional three-stage collinear antenna with a lightning rod manufactured by Nippon Antenna, designed for the 150 MHz band. *Collinear antennas are high-gain antennas used primarily for radio communication, often employed in the VHF to UHF frequency range. *This product features a directional three-stage collinear antenna with a lightning rod. *It is an antenna for fixed station radios in the VHF band. *It operates within the specified frequency range of 140 to 170 MHz. Please specify the center frequency (fo) in MHz when placing your order. *This antenna has a cardioid radiation pattern. *The cardioid pattern refers to a directional pattern shaped like a heart, where the strongest signal is directed forward. *The gain is 6.65 dBi. *The antenna length is approximately 5.27 meters. *It weighs 33 kg. *The antenna side connector is an N-J type. *The antenna side connector is only N-J. It can be converted to other connectors using an extension coaxial cable. *An 80 cm long 8D-2V coaxial cable extends from the antenna. *For more details, please feel free to contact our company.

Company：エクセリ
Price：500,000 yen-1 million yen

Other network tools
antenna

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Wideband Super Discone Antenna D303

0.5 to 200 MHz wideband receiving antenna

The D303 (D-303) is a wideband receiving antenna manufactured by Daiichi Denpa Kogyo (Diamond) for the frequency range of 0.5 to 200 MHz. It is a fixed outdoor antenna for receivers. It comes with a 10m RG58U coaxial cable and an MP connector. The coil can be concentrated in one direction. *For more details, please feel free to contact our company.*

Company：エクセリ
Price：10,000 yen-100,000 yen

Other network tools
antenna

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

120/300MHz band airband receiving antenna D777

120/300MHz band airband receiving antenna

The D777 (D-777) is a 120/300MHz band airband receiving antenna manufactured by Daiwa. It is an outdoor fixed antenna designed for receiving signals in the 120MHz and 300MHz airband. It complies with the European environmental regulation RoHS directive. *For more details, please feel free to contact us.*

Company：エクセリ
Price：10,000 yen-100,000 yen

Other network tools
antenna

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Super Disco Antenna (for Fixed Stations) D3000N

Super disco cone antenna (for fixed stations) that can be installed on balconies of apartment complexes and condominiums.

The D3000N (D-3000N) is a super discone antenna (for fixed stations) manufactured by Daiwa (Diamond). * A discone antenna is a plate-type antenna composed of a disc and a cone. It has a very wide usable frequency range, and by using the disc and cone as elements, it has a lightweight and wind-resistant structure. * It can receive frequencies from 25 to 3000 MHz and transmit in the 50/144/430/904/1200 MHz bands (DIGITAL compatible) for amateur bands and personal radio use. This is an ultra-wideband antenna designed for frequencies from 25 to 3000 MHz. * Please use it in combination with separately sold coaxial cables. The suitable coaxial cable is 10D-2V or lower. * Its lightweight and compact design allows for installation on balconies of apartments and condominiums. * It uses stainless steel elements that are resistant to rust. * It is a completely omnidirectional antenna. * An omnidirectional antenna is one that can transmit and receive radio waves from all directions. * It complies with the European environmental regulation RoHS directive. * For more details, please feel free to contact us.

Company：エクセリ
Price：10,000 yen-100,000 yen

Other network tools
antenna

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Antenna AN0435H25 for mobile radio HP708 used on ships

Antenna for the HP708 portable radio for onboard communication, compliant with the US explosion-proof standard UL 913 and the Canadian explosion-proof standard CSA 22.2.

●AN0435H25 (AN-0435H-25) is an antenna manufactured by Hytera. ●It is an antenna for the HP708 portable radio used for onboard communication, compliant with the US explosion-proof standard UL 913 and the Canadian explosion-proof standard CSA 22.2. ●It is a standard component of the HP708 main unit and can be purchased as a spare or replacement. ●The antenna length is 9 cm. ●The antenna connector is SMA-J. ●It is compatible with GPS/Glonass. ●It supports frequencies of 400–470 MHz and 1575 MHz. ●It complies with the European environmental regulation RoHS. *For more details, please feel free to contact us.*

Company：エクセリ
Price：Other

Other network tools
antenna

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Antenna EA-314

Antenna for Equipment Power Management and Monitoring System XE1151SE

●EA-314 (EA314) is an antenna manufactured by Alinco. ●It is an antenna for the power management and monitoring system XE1151SE. ●It connects to the XE1151SE via the separately sold coaxial cable EDS-49. ●The antenna length is 16 cm. *For more details, please feel free to contact us.*

Company：エクセリ
Price：Less than 10,000 yen

Other network tools
antenna

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Vehicle-mounted high-gain gutter antenna HGB-450-3A-09

Garter mount whip antenna

The HGB-450-3A-09 (HGB4503A09) is a high-gain gutter antenna for vehicles manufactured by Nippon Antenna, designed for the 400 MHz band. The supported frequency range is 350 to 470 MHz, so please specify the frequency when purchasing. - Frequency 350-470 MHz band: HGB-450-3A-09 f:350-370 (set) - Frequency 365-387 MHz band: HGB-450-3A-09 f:365-387 (set) - Frequency 370-390 MHz band: HGB-450-3A-09 f:370-390 (set) - Frequency 410-430 MHz band: HGB-450-3A-09 f:410-430 (set) - Frequency 430-450 MHz band: HGB-450-3A-09 f:430-450 (set) - Frequency 450-470 MHz band: HGB-450-3A-09 f:450-470 (set) For more details, please feel free to contact us.

Company：エクセリ
Price：10,000 yen-100,000 yen

Other network tools
antenna

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Broadband 5-element Yagi antenna (with cover) 5BD-930A

5-element Yagi antenna used for transmission and reception between the center (control station) and the command station for the MCA system fixed station (command station).

The 5BD-930A (5BD930A) is a covered wideband 5-element Yagi antenna manufactured by Nippon Antenna. *The Yagi antenna is a type of antenna made up of three rods of different lengths, functioning as a director, driven element, and reflector, which provides high directivity. It was invented in 1926. *The operating frequency range is 850MHz to 940MHz. This antenna is compatible with the new frequency band after the MCA frequency transition. *The antenna part is fully covered, making it resistant to rain and wind, and it has excellent weather resistance. *As a directional antenna, it only receives radio waves from a specific direction, so please install it according to the direction of the incoming signal. *It has a high gain of 10.15dBi. *For more details, please feel free to contact our company.

Company：エクセリ
Price：10,000 yen-100,000 yen

Other network tools
antenna

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Vehicle-mounted high-gain element ELS-400NR-09

Garter-mounted 400MHz band 3λ/4 collapsible element

The ELS-400NR-09 (ELS400NR09) is a high-gain element (5/8λ type) for vehicles, manufactured by Nippon Antenna, designed for the 400MHz band. It is an antenna for radios operating in the UHF 360 to 470MHz range. This is a 5/8λ element for the 400MHz band. Note that λ (lambda) refers to wavelength. It is a whip antenna, which means it has no directionality and can receive and transmit signals from any angle. The connector is M6 female. Please use it in combination with a separately sold base. For more details, please feel free to contact us.

Company：エクセリ
Price：10,000 yen-100,000 yen

Other network tools
antenna

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

75cm Type CS Antenna 75CSSK1

75cm CS antenna for use in combination with various converter units.

The 75CSSK1 (75-CS-SK1) is a 75cm CS antenna manufactured by Nippon Antenna (NIPPON ANTENNA) (converter unit sold separately). It is a 75cm type CS antenna. It can be used in combination with various converter units. For single satellite reception, a converter unit can be directly attached. This antenna has the strength to withstand maximum wind speeds of 60 m/s. The compatible mast diameter is φ48.6mm to φ89.1mm. The antenna mount and converter unit are sold separately. It is a RoHS compliant product. It is a J-Alert compatible product. *For more details, please feel free to contact us.

Company：エクセリ
Price：Other

Other network tools
antenna

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

400MHz Band Wideband 8-Element Yagi Antenna 8BD-4502

400MHz band fixed station radio antenna

The 8BD-4502 (8BD-4502) is a wideband 8-element Yagi antenna manufactured by Nippon Antenna for the 400 MHz band. *The Yagi antenna consists of three rods of different lengths forming a single antenna, with the shorter rod serving as a director, the radiating element, and the reflector, resulting in a highly directional antenna. It was invented in 1926. *This antenna is for fixed station radios. *The supported frequency range is 330 to 470 MHz. Please specify the transmission frequency ft (MHz) and reception frequency fr (MHz) when placing your order. *It is used for sharing multiple frequencies with a single antenna. *The external matching type designed for weight reduction is a unique design by Nippon Antenna. *It offers stable workability and electrical performance. *It has a single-directional vertical or horizontal polarization. *The connector comes with an NJ connector. Please connect it to the radio using a separately sold coaxial cable. The connector on the radio side is sold separately, so please choose one that matches your radio. *For more details, please feel free to contact us.

Company：エクセリ
Price：100,000 yen-500,000 yen

Other network tools
antenna

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

400MHz Band Wideband 3-Element Yagi Antenna 3BD-4502

400MHz band fixed station radio antenna

The 3BD-4502 (3BD4502) is a 400MHz band wideband 3-element Yagi antenna manufactured by Nippon Antenna. * The Yagi antenna consists of three rods of different lengths that form a single antenna, with the shortest rod serving as the director, the middle as the driven element, and the longest as the reflector, resulting in a highly directional antenna. It was invented in 1926. * It is an antenna for fixed station radios. * The supported frequency range is 330 to 470MHz. Please specify the transmission frequency ft (MHz) and reception frequency fr (MHz) when placing your order. * It is used for sharing multiple frequencies with a single antenna. * The external matching type designed for weight reduction is a unique design by Nippon Antenna. * It offers stable workability and electrical performance. * It has a single directional pattern with vertical or horizontal polarization. * The connector comes with an NJ connector. Please connect it to the radio using a separately sold coaxial cable. The connector on the radio side is sold separately, so please choose one that matches your radio. * For more details, please feel free to contact us.

Company：エクセリ
Price：100,000 yen-500,000 yen

Other network tools
antenna

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Matsuyama Technical Works Co., Ltd. Company Profile

Matsuyama Technical Works is a group of engineers committed to quality and speed.

What we create are antenna components for cutting-edge communication devices, including "antennas built into mobile phones." With well-equipped facilities and experienced engineers, we respond to customer demands through speedy and high-quality parts manufacturing, while our team of engineers continuously pursues the forefront of technology. 【Product Introduction】 ■ Molding for electronic component encapsulation ■ Cutting housings for mobile devices and prototypes ■ Built-in antennas for mobile devices (LTE) ■ W-LAN antennas for mobile devices ■ Built-in antennas for mobile devices ■ Whip antennas 【Equipment】 All processes are managed in-house. ● CAD for mechanical component design ● CAD for electronic circuit design (for circuit diagram creation) ● Rotary molding machines ● Vertical molding machines ● Linear polarization measurement systems, etc. * We also offer equipment rental, environmental testing, and dimensional measurement services. * For more details, please refer to the PDF document or feel free to contact us.

Company：松山テクニカルワークス
Price：Other

antenna
Other electronic parts
antenna

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Technical Column] The Mechanism of Built-in Antennas

The characteristics of antennas, including built-in antennas, and the mechanism by which stable performance is achieved.

The optimal shape of an antenna varies depending on the frequency and application. The most efficient antenna is one that is half the length of the wavelength of the frequency being used. High-frequency waves, which are the source of radio waves, have the property of reversing polarity every half wavelength. Therefore, when the length of the antenna conductor exceeds half a wavelength, the transmission and reception of radio waves do not work well. By making the length of the antenna conductor half the wavelength of the frequency, the radio waves resonate with the antenna. By adjusting the length of the antenna according to the wavelength of the frequency, the antenna and the transmitted radio waves enter a resonant state, allowing maximum power to be radiated. Similarly, in a receiver, the received radio waves and the antenna enter a resonant state, enabling the capture of maximum power. [Content of the document] - About the transmission and reception of radio waves and the length of the antenna - About the basic shapes of antennas - About precautions for built-in antennas For details on the mechanism of built-in antennas and points to consider during design, please download the PDF or feel free to contact us.

Company：松山テクニカルワークス
Price：Other

switch
antenna

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Hybrid antenna "BiConiLog Model3142E"

Flexible mount style! Antenna compatible with emission and immunity.

The "BiConiLog Model3142E" is a hybrid antenna with an innovative design, compact size, and excellent performance. It is capable of measuring a frequency range from 30MHz to 6GHz in a single sweep. There is no need for multiple antennas, and you won't have to spend time setting up equipment. Additionally, it is designed to be used for both immunity and emission testing. 【Features】 ■ Frequency range: 30MHz to 6GHz ■ Average VSWR: 2:1 (above 50MHz) ■ Compatible with emission and immunity testing ■ Flexible mounting style ■ Individual calibration *For more details, please refer to the PDF document or feel free to contact us.

Company：日本イーティーエス・リンドグレン
Price：Other

antenna
antenna

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Integrated preamplifier antenna 'Model 3142E-PA'

Frequency range is 30MHz to 6GHz! Introducing a preamplifier integrated antenna for emission measurements.

The "Model 3142E-PA" is a preamplifier module with an innovative design, compact-sized antenna, and excellent performance. The antenna and preamplifier are calibrated together with the included coaxial cable. This provides the antenna factor, including any mismatches that may occur between the antenna and the preamplifier. It is capable of measuring a frequency range from 30MHz to 6GHz in a single sweep, eliminating the need for multiple antennas and saving time on equipment setup. 【Features】 ■ Frequency range: 30MHz to 6GHz ■ Preamplifier integrated ■ For emission measurement ■ Flexible mounting ■ Individual calibration *For more details, please refer to the PDF document or feel free to contact us.

Company：日本イーティーエス・リンドグレン
Price：Other

antenna
antenna

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Limited Reading Range" UHF Band RFID Antenna "Narrow Directional Antenna

Achieving extremely narrow directivity! RFID reading antenna that suppresses the spread of radio waves.

This is a narrow directional antenna for UHF band RFID reading. By narrowing the reading range of the antenna, it is designed not to recognize tags that you do not want to read, even in environments such as warehouses where reflected waves are likely to occur. 【Features】 ■ Achieves narrow directivity Thanks to Maspro Denkoh's unique technology, extremely narrow directivity has been achieved. It suppresses the spread of radio waves, making it useful when you want to limit the reading area of RF tags. ■ Connector - SMA-J type ■ Performance - Frequency: 902–928 MHz - Polarization: Circular polarization (right-handed) - Antenna gain: 8.5 dBi or less - Directivity (half-power angle): Approximately 22° × approximately 67° - Dimensions: 780(W) × 220(D) × 37(H) mm - Weight: Approximately 2.6 kg *For more details, please refer to the PDF document or feel free to contact us.

Company：マスプロ電工
Price：Other

Entrance and exit control system
Process Control System
Other production management systems
antenna

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Thin and lightweight UHF band RFID antenna "A4 Sheet Antenna"

It is also possible to incorporate it into devices! A thin and lightweight RFID reading sheet antenna.

This is a sheet antenna for UHF band RFID reading. The reading area is wide, A4 size, and it is very thin and lightweight. This product is made to order. 【Features】 ■ Thin and lightweight - Being a very thin sheet-type antenna, it does not stand out when installed on shelves or tables. It can also be embedded in devices. ■ Uniform reading performance - It reads uniformly not only at the center of the antenna but also at the edges. - It is designed to achieve the same reading performance at both the center and the edges. ■ Contact reading capability - It is designed to read without being affected even when the RF tag is in close contact with the antenna. ■ Indoor use ■ Connector SMA-P type ■ Performance - Frequency: 902–928 MHz - Polarization: Circular polarization (right-handed) - Antenna gain: 3 dBi or less (standard +0.5 dBi) - Directivity (half-power angle): Approximately 55° × approximately 90° - Dimensions: 210 (W) × 295 (D) × 3 (H) mm *For more details, please refer to the PDF document or feel free to contact us.

Company：マスプロ電工
Price：Other

Entrance and exit control system
Process Control System
Other production management systems
antenna

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Compact UHF Band RFID Antenna "Compact Antenna" [Linear Polarization]

A compact RFID reading antenna that can be installed in limited spaces. It has screw holes, allowing for secure mounting in the desired location!

This is a compact antenna for UHF band RFID reading. Being a small antenna, it is easy to integrate into production lines and similar environments. It can read RF tags attached to products, allowing for identification of each product in conjunction with a PLC (sequencer) to control conveyors, among other uses. It is ideal for situations where the position of RF tags is fixed, such as in logistics, due to its linear polarized design. This product is made to order. 【Features】 ■ Compact The small size of the antenna allows for installation in tight spaces. Additionally, it has screw holes for secure mounting in the desired location. ■ Terminal (Connector) - SMA-P type ■ Performance - Frequency: 916.8 to 922.2 MHz - Polarization: Linear polarization (vertical) - Antenna gain: 3 dBi or less - Directivity (half-power angle): Approximately 90° × approximately 145° - Dimensions: 70(W) × 170(D) × 10(H) mm - Weight: Approximately 140 g

Company：マスプロ電工
Price：Other

Entrance and exit control system
Process Control System
Other production management systems
antenna

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Forklift Compatible] UHF Band RFID Antenna 'Gate Antenna'

Standard-equipped with a reader-writer and antenna! A large indoor RFID reading gate antenna that can be passed through by forklifts.

This is a large UHF band RFID reading gate antenna that can be passed through by forklifts. It can instantly read multiple RF tags in bulk just by passing through. By attaching RF tags to each product, it allows for reading the contents without opening the cardboard boxes, eliminating the need to unpack and count each product individually. This product is made to order. 【Features】 ■ Large opening that can accommodate forklifts - The gate is very large, allowing forklifts to pass through even when loaded. ■ Suppression of radio wave leakage - To prevent reading RF tags outside the gate, the detection area is kept close to the gate, making misreads less likely. ■ Adjustable antenna height - The detection area can be configured according to the reading targets. ■ Equipped with a reader/writer ■ For indoor use *For more details, please refer to the PDF document or feel free to contact us.

Company：マスプロ電工
Price：Other

Entrance and exit control system
Process Control System
Other production management systems
antenna

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

antenna Product List and Ranking from 90 Manufacturers, Suppliers and Companies | IPROS GMS

antenna Manufacturer, Suppliers and Company Rankings

antenna Product ranking