Last Updated： Aggregation Period:Oct 15, 2025～Nov 11, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Oct 15, 2025～Nov 11, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Oct 15, 2025～Nov 11, 2025
This ranking is based on the number of page views on our site.
121～135 item / All 247 items
It comes with storage, so you can store disaster prevention supplies and other items.
Typically used as a backrest lobby bench, it can be converted into a bed by reclining in case of emergency.
This is a foldable bench that can be easily set up at construction sites, civil engineering sites, single-family homes, factories, and any other location where a break is needed.
Due to its foldable and lightweight design, it is easy to carry and can be used anywhere, allowing you to take a break wherever you like.
Tabletop clean bench (safety sliding door)
This is a tabletop clean bench with a ratchet structure and a safe sliding door. *Specifications: Frame / Aluminum Door surface, sides, top, back / Transparent PVC, Bottom plate / White PVC *Depending on the application, we can manufacture items of different sizes and shapes according to your preferences.
A single frame can measure from small to large capacities! It is easy to move and install because no load absorption device is required.
This is an introduction to the "Motor Evaluation Bench" handled by Smack Corporation. This product allows for easy settings such as switching between 120-degree power supply and sine wave power supply, as well as advance angle adjustment. The test motor stand features a lifting function, making axis alignment easy. With a simple design that reduces vibration and noise, it is a multi-type that can measure from small to large capacities with a single stand. It is easy to move and install as it does not require a load absorption device. Additionally, it is an energy-saving type that returns load energy to the power supply. 【Features】 ■ The test motor stand has a lifting function for easy axis alignment ■ Energy-saving type that returns load energy to the power supply ■ Reduction of vibration and noise due to simple design ■ Multi-type that can measure from small to large capacities with a single stand ■ Easy to move and install as it does not require a load absorption device *For more details, please refer to the PDF document or feel free to contact us.
From general purposes to specialized uses! Active in various environments and manufacturing sites.
We would like to introduce our product, the "Punching Laboratory Bench with Side Table." Made of SUS304 stainless steel, it features a foldable side tabletop. We can manufacture it in your desired size and specifications according to your intended use and location. Please feel free to contact us when you need assistance. 【Specifications】 ■ Brand: Erecta ■ Material - Main body: SUS304 (18-8) stainless steel - Casters: φ75mm stainless fittings (with stopper) urethane wheels ■ Load capacity: 200kg (side table load capacity 30kg) ■ Accessories: 100V 3-socket table tap *For more details, please refer to the PDF document or feel free to contact us.
Professional in Clean System Solutions
Okabe Tech Co., Ltd. is a company primarily engaged in the design, manufacturing, and sales of cleanroom equipment, as well as the sales of consumables for cleanrooms. Our company adheres to the "iron rule" of continuously providing higher quality products and services, and as professionals in clean system solutions, we strive daily to develop and sell new products. If you have any inquiries regarding cleanroom equipment, please feel free to consult with Okabe Tech. 【Business Activities】 ■ Design, manufacturing, and sales of cleanroom equipment ■ Sales of consumables for cleanrooms ■ Design, manufacturing, and sales of steel plate products and components ■ All operations incidental to the above *For more details, please refer to our catalog or feel free to contact us.
Adoption of ultra-thin filters! Compact design in both depth and height.
Our clean bench features inverter lighting, achieving an illuminance of 1800 Lux with 40W x 2 units (Type 1300), and is designed for energy efficiency. (No need to switch between 50 and 60 Hz) We offer two types: the "Horizontal Flow Type (HS)," suitable for handling small parts without disrupting airflow, and the "Vertical Flow Type (VS)," which maintains positive pressure in the work area for optimal cleanliness, making it ideal for all types of work. Additionally, a wind speed sensor is installed directly below the air outlet, allowing you to check the timing for cleaning the pre-filter and replacing the HEPA filter via LED display. 【Features】 ■ Inverter lighting ■ Airflow adjustment function ■ Remarkable thinness and lightness ■ Accurate lifespan indication ■ Safety design *For more details, please refer to the catalog or feel free to contact us.
Laboratory bench (flat/laboratory type)
Introducing the "Laboratory Bench" crafted by Craftwork Co., a select group of professionals who are well-versed in the properties of stainless steel and demonstrate their craftsmanship in design, cutting, bending, welding, polishing, and cleanup. ■□■ Product List ■□■ ■ Punching Laboratory Bench - Material: Stainless Steel (SUS304) with 5Φ8P perforated holes - Casters: 75Φ nylon urethane casters (with diagonal stopper) - Equipped with three 100V outlets, removable lower shelf ■ Flat Laboratory Bench - Material: Stainless Steel (SUS304) - Casters: 75Φ rubber casters (with diagonal stopper) - Equipped with three 100V outlets, removable lower shelf ■ We manufacture precise, robust, and beautiful stainless steel products. For more features and details, please inquire via catalog download or request for materials.
Stainless steel screen bench
Introducing the "Stainless Steel Clean Bench" manufactured by Craftwork, a select group of professionals who are well-versed in the characteristics of stainless steel and demonstrate craftsmanship in design, cutting, bending, welding, polishing, and cleanup. ■□■ Product List ■□■ ■ Stainless Steel Clean Bench (Pipe Workbench Type) - Higher opening ratio than a perforated workbench, allowing for better airflow - Smooth lateral movement on the tabletop - Material: Stainless Steel (SUS304) #400 - Tabletop: SUS304 #400 16φ round pipe ■ Stainless Steel Clean Bench - Usable in various settings, including as a step stool - Material: Stainless Steel (SUS304) #400 - Tabletop: SUS304 #400 16φ round pipe ■ We manufacture precise, robust, and beautiful stainless steel products. For more features and details, please contact us via catalog download or request for materials.
Manufacturing precise, robust, and beautiful stainless steel products.
Introducing the laboratory bench with a sub-table produced by the elite group of professionals at Kraftwerk.
Manufacturing precise, robust, and beautiful stainless steel products.
Introducing the laboratory bench produced by the elite group of professionals at Kraftwerk.
Manufacturing precise, robust, and beautiful stainless steel products.
Introducing the stainless steel screen bench produced by the elite team of professionals at Kraftwerk.
You can create a class 100 clean room for under 100,000 yen!
Locally, it is used by those who require a high level of cleanliness, even just on the tabletop.
This is a simple clean bench made with an aluminum frame. It is lightweight and easy to carry, allowing you to easily create a clean environment just by placing it on a workbench!
▼ This is a simple clean bench made with an aluminum frame. ▼ It is lightweight, making it easy to transport. ▼ It is ideal for ensuring a clean environment on the workbench. ▼ The position of the doors can be fixed at 50mm intervals to suit your work. We also offer carts that are sized to match as workbenches. Custom-made frames are also available. Please feel free to contact us.
Lightweight and easy to carry. A simple clean bench using an aluminum frame.
The CCF-1, 2, and 3 simple clean hoods are lightweight clean benches that use an aluminum frame. They are easy to transport and are ideal for ensuring a clean area on the work surface. The cleanliness level is Class 100, with a clean module unit and one pre-filter, achieving a dust collection efficiency of over 99.97% at 0.3μm. The airflow is 1.0m³/min, and the materials for the top, sides, and back are anti-static PVC 3t, while the main frame material is aluminum with anodized treatment. For more details, please contact us or refer to the catalog.
