burner×正英製作所 - メーカー・企業と製品の一覧

Infrared gas burner! Blast-type Schwank burner [BS burner]

Large-capacity premixed Schwank burner that achieves high heat with a large size by adopting a blast combustion method.

The BS Burner Series is a versatile large-sized gas infrared burner suitable for heating textiles and food, as well as for high-speed heating in powder coating. It is larger and capable of stronger heating than conventional Bunsen-type infrared burners. By adopting a blast combustion method, the combustion volume per unit area has increased by approximately 40%. Additionally, the heating direction can be freely selected—upward, downward, or sideways—allowing for suitable installation on various devices. 【Features】 ■ High radiation efficiency, energy-saving type ■ Lightweight for easy installation ■ Flexible heating direction ■ Stable combustion ■ Automatic ignition and combustion safety device *For more details, please refer to the PDF document or feel free to contact us.

企業：正英製作所本社、東京支店、名古屋営業所、大阪支店、広島支店、九州支店
価格：Other

Heating device
Industrial Furnace
Drying Equipment

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Introduction to Surface Combustion Gas Burners [Custom-made Gas Burners]

Contributing to "energy conservation" in heating equipment! A rich lineup of surface combustion burners.

The "surface combustion burner" can be adjusted over a wide range from "infrared heating" to "blue flame heating." Custom-made designs are available to match the shapes of pots, kettles, and furnaces, including disc-shaped, cylindrical, conical, hemispherical, and concave types. Since electric heaters consume a large amount of power, utilizing "gas heaters" with ample power contributes to the "energy-saving" of thermal equipment. 【Features】 ■ A single surface burner can be adjusted over a wide range from infrared heating to blue flame heating. ■ Custom-made designs are available to match the shapes of pots, kettles, and furnaces. ■ Contributes to the "energy-saving" of thermal equipment. *For more details, please refer to the PDF document or feel free to contact us.

企業：正英製作所本社、東京支店、名古屋営業所、大阪支店、広島支店、九州支店
価格：Other

Other heaters
Heating device
Industrial Furnace

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Introduction of Energy-Saving Exhaust Heat Recovery Gas Burners [STB Series]

Built-in recuperator! Low-cost, energy-saving burner that improves fuel efficiency and enables early recovery.

The "STB Burner Series" is an energy-saving type burner that recovers heat from the exhaust of melting furnaces and heating furnaces using a built-in heat exchanger. By combining the burner itself with the exhaust and waste heat recovery heat exchanger, it aims to achieve approximately 25-30% fuel savings compared to conventional burners. Furthermore, one effective way to maximize the use of this product is to establish a dedicated recirculation path for waste heat recovery. 【Features】 ■ Built-in recuperator ■ Improves fuel efficiency and allows for early recovery ■ Recovers the waste heat flow after heating instead of discarding it from the exhaust ■ Combines exhaust and waste heat recovery heat exchanger ■ Patent obtained for the waste heat recovery system *For more details, please refer to the PDF materials or feel free to contact us.

企業：正英製作所本社、東京支店、名古屋営業所、大阪支店、広島支店、九州支店
価格：Other

Heating device
Industrial Furnace
Other heaters

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Food heating equipment metal knit burner combustion package set

The synergistic effect of heat flow and infrared is demonstrated! Along with significant fuel efficiency improvement, it enables the sealing and insulation of the furnace.

The "Metal Knit Burner Package" achieves "high efficiency and high power" through the synergistic effect of controlled heat flow and infrared while minimizing unnecessary air! This is a proposal for a set of "originally designed burners and safety control devices" aimed at kitchen equipment and food machinery manufacturers. In pot and kettle heating, it is possible to intentionally set heating areas and balance, as well as achieve even surface heating. The combustion set with safety devices, known as the Pack Mixer, also realizes linear heat control. It can be equipped with convenience comparable to electric systems. 【Features】 ■ Contributes to improving the surrounding environment ■ Pot and kettle heating can be customized in various shapes with original designs ■ The Pack Mixer supports proportional control and programmed heating through electronic control ■ Original unit arrangements can be tailored to fit the space of pots and kettles ■ Assembly work at the factory can be completed in a short time, maintaining stable quality *For more details, please refer to the PDF materials or feel free to contact us.

企業：正英製作所本社、東京支店、名古屋営業所、大阪支店、広島支店、九州支店
価格：Other

Other heaters
Food Processing Equipment
Heating device

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Single End Radiant Tube Burner [TRF Burner]

It is a compact and energy-saving tube heater with a built-in heat exchanger inside the gas burner. 【Reduces fuel consumption by recovering waste heat! High-efficiency type】

The TRF burner is an indirect heating burner that uses a single-end type heat transfer tube, heating through radiant heat. It has a compact installation in the furnace body and provides a uniform temperature distribution on the tube surface. 【Features of the TRF Burner】 ◇ Achieves high thermal efficiency through waste heat recovery with an integrated heat exchanger! ◇ The single-end tube has a double-layer structure of an outer and inner tube, allowing for compact installation in equipment. ◇ The tube surface temperature distribution is excellent, providing high power compared to electric heaters. ◇ It is a low NOx burner with stable combustion. ◇ The use of heat-resistant metal tubes allows for furnace temperatures up to 950°C. ◇ There is also an option for a ceramic tube for the outer tube. ◇ Installation can be done both horizontally and vertically. ◇ By attaching an ejector to the exhaust port, it is possible to create a negative pressure in the outer tube, preventing the outflow of combustion exhaust gases into the furnace even if there is wear on the outer tube. It can be used in various industrial furnaces, heating furnaces, heat treatment furnaces, atmosphere heat treatment furnaces, and more, including carburizing furnaces, quenching furnaces, sintering furnaces, curing furnaces, slow cooling furnaces, nitriding furnaces, annealing furnaces, and tempering furnaces. It can also be widely used as an indirect heating oven for food.

企業：正英製作所本社、東京支店、名古屋営業所、大阪支店、広島支店、九州支店
価格：Other

Heating device
Other heaters
Industrial Furnace

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Challenging Decarbonization Technologies! Introduction to the Thermal Technology Research Institute [Latest Information for 2025!]

2nd anniversary celebration! Approximately 100 customers attended. Experience the forefront of decarbonization technology, including hydrogen combustion gas burners.

In May 2023, we established the "Thermal Technology Research Institute," and over the past year, we have conducted numerous tests. ~ Test Equipment Overview ~ ◇ Aluminum Melting Holding Furnace This furnace allows for verification tests of "melt quality" and "melting efficiency" through hydrogen combustion melting. It is an actual machine-based aluminum melting furnace. Melting capacity: 150 kg/h Melting: Hydrogen combustion gas burner Holding: Electric heater ◇ Painting Drying Furnace (Testing Equipment) Using equipment that is comparable to actual production sites, tests can be conducted with four different heat sources. It accommodates various types of workpieces. In the fiscal year 2023, we conducted optimization tests of heat sources with approximately 20 customers. ◇ Direct Combustion Deodorization Device (On-site Testing Available) A movable demo unit that can conduct tests using actual odors at customer factories. - Treatable components: VOCs (volatile organic compounds) and various other odors. - Treatment capacity/temperature: Max. 1.0 m³N/min / 760℃ ⚪︎ Hydrogen Combustion Gas Burner As a manufacturer of industrial gas burners, we are advancing the adaptation of our existing lineup to hydrogen. The combustion observation of hydrogen gas burners has been very well received. Experience the forefront of technology development aimed at a decarbonized society.

企業：正英製作所本社、東京支店、名古屋営業所、大阪支店、広島支店、九州支店
価格：Other

Heating device

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

High Efficiency Regenerative Radiant Tube Burner [RTR Gas Burner]

Tube thermal efficiency of over 80%! The burner features a dual-unit switchable heat storage combustion system, allowing for compact and high-load indirect heating.

A regenerative burner with an indirect heating method that enables tube efficiency of over 80% (based on exhaust loss). The heat storage medium built into the burner uses a low-pressure loss ceramic porous body. The regenerative system typically alternates between a pair of two burners (regenerative burners) integrated with the heat storage medium, igniting them at intervals of several tens of seconds. When one burner is combusting, its exhaust is discharged through the heat storage medium of the other burner, and when that burner ignites next, the combustion air is preheated using the heat storage medium to recover exhaust heat. For radiant tubes, by installing regenerative burners at both ends of tubes such as U or W shapes and alternating combustion, tube efficiencies of over 80% can be achieved. □ High efficiency (tube efficiency over 80%) □ Compact with built-in heat storage medium □ Low pressure loss of heat storage medium □ Direct ignition allows for time-proportional ON/OFF control □ Uniform surface temperature of the tube □ Minimal combustion noise 【Model (Combustion Capacity)】 RTR-100A (52kW) RTR-125A (75kW) 【Maximum Operating Temperature】 950℃ 【Gas Type】 City gas (13A, LNG) / Propane (LPG)

企業：正英製作所本社、東京支店、名古屋営業所、大阪支店、広島支店、九州支店
価格：Other

Heating device
Industrial Furnace
Other heaters

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Stable combustion fan-equipped packaged gas burner [SBII burner]

A gun-type burner that can achieve complete combustion with either natural gas or propane gas! The integrated blower and combustion piping equipment make inspection and cleaning easy.

□Stable combustion is possible regardless of the type of gas. It can be used with city gas (13A, LNG) and propane gas (LPG). □Easy to handle. The combustion blower and burner are integrated, and it is equipped with a combustion safety device. It can be easily ignited with a power supply and ignition switch (control panel specification). □Safe and reliable to use. In case of an abnormal situation, the safety device will cut off the gas and issue an abnormal alarm. □Easy to adjust combustion. By consolidating the fuel adjustment section to the burner body side, adjustments are easy. □Easy maintenance. The detachment and attachment of each component part are simple, making maintenance and regular inspections easy. □In addition to ON-OFF control, Hi-Low control and proportional control can also be selected. □Reliable ignition can be achieved with a direct ignition method. 【Model (Combustion Capacity)】 SBII-70 (81.4 kW) SBII-150 (174.4 kW) SBII-250 (290.7 kW) SBII-350 (407.0 kW) *For use in high-pressure environments and at high temperatures, we recommend the "BJ burner" and "SP burner."

企業：正英製作所本社、東京支店、名古屋営業所、大阪支店、広島支店、九州支店
価格：Other

Heating device
Industrial Furnace
Drying Equipment

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Introduction of decarbonization and low-carbon technology for thermal equipment [Hydrogen Gas Burner 2025]

Introducing the forefront of development! Hydrogen combustion without carbon dioxide emissions! SHOEI is advancing the hydrogen compatibility of its proven in-house burners.

【New Development! Hydrogen Gas Burner Lineup】 ◇ High-Temperature Furnace Hydrogen Gas Burner (EIS-H2) Achieves a wide combustion range and stable combustion Suitable for heat treatment furnaces, melting furnaces, heating furnaces, deodorization devices, etc. ◇ Package Burner (BJ-H2) ◇ Fan-Equipped Package Burner (SP-H2) Provides stable flames even under high furnace pressure conditions, with good operability and maintainability; suitable for low-temperature fields such as drying furnaces, as well as various industrial furnaces like heat treatment furnaces and deodorization devices. ◇ Hydrogen Combustion Recuperative Burner (STBW-H2) Equipped with a waste heat recovery device (heat exchanger), capable of reducing fuel usage by approximately 30% in addition to decarbonization. Developed in collaboration with Tokyo Gas Co., Ltd. and Tokyo Gas Engineering Solutions Co., Ltd.! Suitable for aluminum melting holding furnaces, preheating, heat treatment furnaces, etc. ◇ Hydrogen Combustion Single-End Radiant Tube Burner (TRFH-H2) Indirect heating method utilizing radiant heat With an integrated heat exchanger, the burner efficiency is 75%, achieving high efficiency. ◇ Hydrogen Combustion Duct Burner (SDC-H2) Converts duct burners mounted on hot air generation devices to hydrogen combustion Suitable for various drying furnaces such as painting drying and food drying.

企業：正英製作所本社、東京支店、名古屋営業所、大阪支店、広島支店、九州支店
価格：Other

Heating device
Drying Equipment
Industrial Furnace

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Energy-efficient infrared gas burner for food heating [Schwank Burner]

Lightweight and compact, easy to install. You can use infrared heating simply by connecting the gas. There is also a rich lineup of combustion volume and combustion area.

An infrared Schwank burner that can heat all objects without contact. A gas burner that can provide powerful heating without direct flames through surface combustion with a ceramic plate. It reduces gas consumption for efficient combustion, contributing to energy savings. 【Features】 1. Ideal for heating food Most of the infrared wavelengths emitted from the heated ceramic plate are between 2-4μm. This wavelength range has the highest thermal energy and is particularly easily absorbed by water, making it perfect for heating, drying, and cooking food. 2. Flexible installation orientation The heating direction can be upward, downward, or sideways, regardless of the installation orientation. It can be used according to the desired direction for browning. 3. Good installation characteristics Its lightweight and compact casing make installation easy. It can be ignited simply by connecting LNG (13A/city gas) or LPG (propane gas). 4. Wide range of sizes With a rich lineup of combustion volumes and combustion areas, you can choose the most suitable model for your equipment. For more details, please refer to the gas burner product catalog. Feel free to contact us.

企業：正英製作所本社、東京支店、名古屋営業所、大阪支店、広島支店、九州支店
価格：Other

Food Processing Equipment
Heating device
Other food machinery

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Hydrogen Burner Single-End Indirect Heating Burner [TRFH-H2]

The hydrogen burner specification has debuted for the highly experienced single-ended radiant tube burner! It is an indirect heating method that heats through radiant heat.

Single-end radiant tube burner for metal heat treatment furnaces The hydrogen-only version of the "TRF Burner" has debuted! This is a high-efficiency, energy-saving type gas burner equipped with a heat exchanger inside. It utilizes an indirect heating method that takes advantage of radiant heat from the heat transfer tube, and it has a wide range of proven applications in various atmosphere heat treatment furnaces, sintering furnaces, and food heating. 【Features】 □ Zero CO2 emissions during combustion due to hydrogen-only burning □ Achieves uniform tube surface temperature distribution even with hydrogen combustion □ High efficiency with a burner efficiency of 75% thanks to the built-in heat exchanger □ NOx emissions are equal to or lower than those of city gas □ Stable hydrogen gas combustion achieved with a "dual gas nozzle" compatible with city gas/LPG specifications □ Existing gas burners can be converted to hydrogen gas burners through parts replacement *The current TRFH burner can be converted to hydrogen combustion through parts replacement. Please inquire as there is a matching requirement with the furnace.

企業：正英製作所本社、東京支店、名古屋営業所、大阪支店、広島支店、九州支店
価格：Other

Heating device
Industrial Furnace
Other heaters

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Latest! Introduction of decarbonization and low-carbon technology for thermal equipment [Exhibition Participation]

Introducing the latest lineup of hydrogen gas burners and low-carbon equipment! 【Thermal Technology 2024】 (October 10-11, Grand Front Osaka)

**Exhibition Information** An information dissemination event from Kansai consisting of product and technology exhibitions of industrial furnaces and related equipment, as well as seminar presentations and lectures. We will be exhibiting at Thermal Technology 2024. Date: October 10 (Thursday) and 11 (Friday), 2024, from 10:00 to 17:00 Venue: Grand Front Osaka, North Building, B2F **Latest! Hydrogen Gas Burner Lineup** Hydrogen combustion with zero carbon dioxide emissions! SHOEI is advancing the hydrogen compatibility of its proven in-house burners. We offer a wide range of products suitable for various temperature ranges and types of thermal equipment. **Electrification of Thermal Equipment** We are responding to high-efficiency electrification based on proven thermal equipment (combustion furnaces). The newly developed electric hot air generator (AH-E) can replace our gas combustion type. **Hybrid Heating of Electric and Combustion Types** In addition to full electrification of thermal equipment, we have numerous achievements in hybrid heating that combines the advantages of combustion types. In addition to improving the efficiency of electric systems, energy-saving systems that utilize waste heat for gas burners are also possible. **Test Equipment Available** The Thermal Technology Research Institute offers various test furnaces, including hydrogen combustion testing!

企業：正英製作所本社、東京支店、名古屋営業所、大阪支店、広島支店、九州支店
価格：Other

Heating device
Industrial Furnace
Drying Equipment

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Pipe burner

We also manufacture custom lengths, shapes, and pipe diameters. Equipped with a unique retention flame protection mechanism, it provides a stable flame.

Equipped with a unique retention flame mechanism, it achieves a stable flame. It allows for safe combustion control with automatic ignition and flame detection. 【Features】 ◇ Flexible design tailored to the length of the pipe and the required combustion volume ・Please let us know the desired length of the combustion surface and the combustion volume. ◇ Stainless steel options are also available. ◇ A wide variety of choices from the number of units to connection shapes ・ We can flexibly accommodate from single to multiple units. ・ Connection shapes include I-type, T-type, L-type, H-type, and more. ・ Pipe diameters range from 15A (1/2B) to 50A (2B). (Please consult us for other sizes.) ◇ Automatic ignition and flame detection options are also available. ◇ Benzene combustion without the need for a combustion blower is possible.

企業：正英製作所本社、東京支店、名古屋営業所、大阪支店、広島支店、九州支店
価格：Other

Pipe burner type fryer
Food Processing Equipment
Heating device

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

High emissivity enables proximity heating【Radiant Cup Burner】

It has a high emissivity and allows for proximity heating for complete combustion.

The cup is made of lightweight refractory material (ceramic wool molded product) and, after ignition, quickly radiates infrared from the surface of the cup while generating high-temperature heat flow from the flame. 【Features】 1. It is a burner with a high emissivity. The cup shape is designed for optimal surface radiation, allowing for radiant heating including the furnace walls. 2. Proximity heating is possible. Since the flame completely burns on the burner cup surface, proximity heating is achievable, enabling a more compact design. 3. Easy installation due to lightweight. The use of lightweight refractory materials makes the burner lightweight. 4. Heating direction is flexible. Heating can be directed upwards, downwards, or sideways. 5. Resistant to heat cracks. As it is made of molded ceramic fiber, it is less prone to heat cracks even with downward heating, providing excellent durability. 6. Automatic ignition and combustion safety device can be installed. By installing an automatic ignition and combustion safety device, operability and safety can be further enhanced. (This will be a custom product.) 7. A turn-down ratio of up to 1:3 can be achieved. At an internal furnace temperature of 1,000°C, a turn-down ratio of 1:3 is possible.

企業：正英製作所本社、東京支店、名古屋営業所、大阪支店、広島支店、九州支店
価格：Other

Heating device
Industrial Furnace
Baking machine

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Pilot Burner [PLX Burner]

A pilot burner with built-in ignition electrode that has high flame stability.

【Features】 1. It is a blast (premixed) type pilot burner with high flame stability. 2. The flame has a strong base and can produce a longer flame, ensuring reliable ignition of the main burner. 3. The tip of the burner is made of stainless steel, providing high durability. 4. Ignition of this burner is achieved by connecting the secondary side (high voltage) of the igniter to the built-in ignition rod, creating a spark at the burner tip. 5. By using a "venturi mixer and zero governor" (recommended) in the mixer, it can prevent incomplete combustion even if there are changes in the combustion air, maintaining a stable mixing ratio. 6. The length of the burner can be custom-made to order.

企業：正英製作所本社、東京支店、名古屋営業所、大阪支店、広島支店、九州支店
価格：Other

Heating device
Industrial Furnace
Burner and tripod

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

burner×正英製作所 - メーカー・企業と製品の一覧

burnerの製品一覧

Infrared gas burner! Blast-type Schwank burner [BS burner]

Introduction to Surface Combustion Gas Burners [Custom-made Gas Burners]

Introduction of Energy-Saving Exhaust Heat Recovery Gas Burners [STB Series]

Food heating equipment metal knit burner combustion package set

Single End Radiant Tube Burner [TRF Burner]

Challenging Decarbonization Technologies! Introduction to the Thermal Technology Research Institute [Latest Information for 2025!]

High Efficiency Regenerative Radiant Tube Burner [RTR Gas Burner]

Stable combustion fan-equipped packaged gas burner [SBII burner]

Introduction of decarbonization and low-carbon technology for thermal equipment [Hydrogen Gas Burner 2025]

Energy-efficient infrared gas burner for food heating [Schwank Burner]

Hydrogen Burner Single-End Indirect Heating Burner [TRFH-H2]

Latest! Introduction of decarbonization and low-carbon technology for thermal equipment [Exhibition Participation]

Pipe burner

High emissivity enables proximity heating【Radiant Cup Burner】

Pilot Burner [PLX Burner]

burnerに関連する検索キーワード