Last Updated： Aggregation Period:Feb 04, 2026～Mar 03, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Feb 04, 2026～Mar 03, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Feb 04, 2026～Mar 03, 2026
This ranking is based on the number of page views on our site.
61～90 item / All 655 items
2CH Power over Gigabit LAN Frame Grabber, PCI-Ex4
Features - Compliant with PCI Express [x4] - Supports two independent Gigabit Ethernet ports - Jumbo frame support (9KB) - Link aggregation support - Automatic detection and classification of powered devices (PD)
2CH 24Bit 432KS/s simultaneous sampling A/D & D/A conversion
Features - 24-bit sigma-delta ADC and DAC - 2-channel simultaneous analog input & 2-channel simultaneous analog output - 2-channel simultaneous update analog output - Software sampling rate up to 432KS/s - Programmable input range: ±40 V, ±10 V, ±3.16 V, ±1 V, ±0.316 V - Programmable output range: ±10 V, ±1 V, ±0.1 V - AC or DC input coupling, software selectable - Trigger I/O connector for external digital trigger signals - Multi-module synchronized 10MHz clock, PXI start trigger & PXI trigger bus
4/8 port asynchronous serial communication RS-422/485
Features - PICMG 2.0 Rev 2.1 - 4/8 asynchronous communication ports (intelligent buffer) - 3/4 RS-232 ports and one isolated RS-422/485 port (isolation voltage 2500 VRMS) - TXD/RXD signal line surge protector - Supports two cards per system - Robust DB-37 connector (cPCI-3534) - Robust DB-62 connector (cPCI-3538) - Available rear I/O on cPCI-3534R/cPCI-3538R
4CH 14/16Bit Simultaneous Sampling A/D Conversion DAQ Card
■PXI 2.0 compliant ■3U Eurocard form factor, CompactPCI compliant ■4-channel differential analog input ■14 bit A/D resolution (PXI-2010) ■16 bit A/D resolution (PXI-2005 & PXI-2006) ■Onboard 8 K-sample A/D FIFO (PXI-2010) ■Analog input bipolar
64CH 12/16Bit Simultaneous Sampling A/D Conversion DAQ Card
■PXI 2.0 compliant ■3U Eurocard form factor, CompactPCI compliant ■64-CH single-ended or 32-CH differential analog input ■Maximum 3MS/s sampling rate (PXI-2204) ■12 bit A/D resolution (PXI-2204) ■16 bit A/D resolution (PXI-2205 & PXI-2206) ■Onboard 1K-sample A/D FIFO (PXI-2010) ■Bipolar or unipolar analog input
8CH 24Bit Maximum 192KS/s Simultaneous Sampling Analog Input Module
Features ◾ 24-bit Sigma-Delta ADC ◾ 8CH simultaneous analog input ◾ Maximum sampling rate 192KS/s ◾ Input range ±1V - 10V ◾ Dynamic range 110dB ◾ Anti-aliasing filter ◾ Input coupling AC/DC (software selectable) ◾ IEPE - 4mA (software configurable)
NVIDIA(R) Quadro(R) RTX4000 GPU equipped, PCI Express graphics card
【Features】 - Interface: PCIExpress 3.0[x16] - Display Output: 3x DisplayPort 1.4 Digital Video Output (DP++) 1x USB Type-C 4x 3840x2160 @120Hz 4x 5120x2880 @60Hz 2x 7680x4320 @60Hz - VirtualLink x1 - Audio Output Compatible DisplayPort - 3D Stereo Support - Compatible with Quadro Sync II - NVIDIA nView(R) Desktop Management Software - HDCP 2.2 Compliant - NVIDIA Mosaic
NVIDIA(R) Quadro(R) RTX5000 GPU equipped, PCI Express graphics card
**Features** - Interface: PCI Express 3.0 [x16] - Display Outputs: - 4x DisplayPort 1.4 digital video outputs (DP++) - 1x USB Type-C - 4x 4096x2160 @ 120 Hz - 4x 5120x2880 @ 60 Hz - 2x 7680x4320 @ 60 Hz - VirtualLink x1 - Audio output compatible DisplayPort - 3D stereo support - Compatible with Quadro Sync II - NVIDIA nView® desktop management software - HDCP 2.2 compliant - NVIDIA Mosaic
NVIDIA(R) Quadro(R) RTX6000 GPU equipped, PCI Express graphics card
**Features** - Interface: PCI Express 3.0 [x16] - Display Output: - 4x DisplayPort 1.4 digital video output (DP++) - 1x USB Type-C - 4x 4096x2160 @ 120 Hz - 4x 5120x2880 @ 60 Hz - 2x 7680x4320 @ 60 Hz - VirtualLink x1 - Audio output compatible DisplayPort - 3D stereo support - Compatible with Quadro Sync II - NVIDIA nView® desktop management software - HDCP 2.2 compliant - NVIDIA Mosaic
Intel I210-AT equipped, energy-saving, Ethernet card for medical use
Features ■ Uses Intel I210-AT ■ RJ45 + 1GbE 1 port ■ Complies with IEC-60601-1 ■ Withstands up to 4KV of dielectric strength
PCI-based serial communication card, jumperless, plug and play
Features ■ IRQ and IO addresses are automatically assigned by the BIOS ■ Supports up to 2 cards per system ■ Jumperless for easy configuration ■ PCI Rev2.1 Plug and Play
16CH latching relay output and 16CH isolated DI card
Features - Supports PCI Express x1 and plug-and-play (PCIe-7256) - 16-channel latch SPDT relay output - Power-saving during relay operation - Output status remains unchanged when power is off - Onboard LED indicator for relay status - 16-channel isolated digital input - Status change (COS) interrupt - Board ID
PCIe ×4 slot compatible, 4-channel LAN Bypass/PoE+ LAN expansion card compliant with IEEE 802.3at.
Features ■ Equipped with 4 PoE+ LAN ports powered by Intel Ethernet Server Adapter I350 ■ Energy-efficient with power management features, supporting Ethernet IEEE 802.3az (Energy Efficient Ethernet/EEE) and DMA core-lessing support ■ Achieves low power consumption with a single chip ■ Compliant with IEEE 802.3at, capable of supplying up to 25.5W/48V per port ■ Two LAN ports support bypass mode (hardware) ■ Optionally changeable to M12 connector specifications ■ Compliant with IEEE 802.1AS and supports IEEE 1588 high-precision time synchronization protocol (PTP) ■ Supports teaming, maximum 9.7K jumbo frames, and link aggregation (LAG) ■ Operating temperature range from -25°C to 70°C
PCIe ×4 slot compatible, 4-channel PoE+ (2.5GigE) LAN expansion card compliant with IEEE 802.3at.
Features ■ Equipped with Intel I225, 2.5Gbps 2.5GBASE-T compatible with 4 LAN ports ■ Supports PCIe x4 slot (PCIe 3.0, 8 GT/s) ■ Complies with IEEE 802.3at standard (PoE+), capable of supplying up to 25.5W/48V per port, with On/Off control function ■ Complies with IEEE 802.3bz (2500BASE-T), IEEE 802.3ab (1000BASE-T), IEEE 802.3u (100BASE-TX), IEEE 802.3i (10BASE-TX) standards ■ Supports teaming (fault tolerance, link aggregation (802.3ad), load balancing), with a maximum jumbo frame support of 9KB ■ Energy-efficient Ethernet with power management features ■ iSVR (integrated switching voltage regulator), IEEE 802.1q VLAN support ■ Operating temperature range of -25°C to 60°C
SUMIT expansion card, supports 2 10GigE LAN, operating temperature confirmed from -25°C to 50°C.
Features ■ Intel X710-AT2 10GBASE-T controller supports data transfer speeds of up to 10Gbps ■ Compliant with IEEE 802.3an Fast Ethernet standard ■ IEEE 1588 high-precision time synchronization protocol (PTP) ■ Supports IEEE 802.3az, reducing power consumption ■ Maximum jumbo frame size of 9728 bytes, link aggregation ■ Intel Ethernet Flow Director (FD) ■ Intel Virtualization Technology (VT) ■ Operating temperature range of -25°C to 70°C
PCIe x4 slot compatible, equipped with Intel X550-AT2, wide operating temperature guarantee, expansion card supporting 2×10 GigE ports.
Features ■ Equipped with Intel X550-AT2 10GBASE-T Ethernet controller, supporting data rates of up to 10Gbps ■ Compliant with IEEE 802.3an standard ■ Compliant with IEEE 1588 standard (Precision Time Protocol/PTP) ■ Supports IEEE 802.1Q VLAN standard ■ Supports jumbo frames of up to 9728 bytes and link aggregation ■ Wake-on-LAN (WoL) and PXE support ■ Power management features for Intel Ethernet ■ Supports Intel Data Direct I/O Technology (DDIO) ■ Supports Intel Virtualization Technology (VT-c) ■ Available in low-profile and standard (full-height) form factors ■ Operating temperature range guaranteed from -40°C to 55°C
Supports PCIe x4 slot, equipped with Intel X710-BM2, wide operating temperature guarantee, compatible with 2×10 GigE SFP+ ports.
Features ■ Equipped with Intel X710-BM2 10GigE Ethernet controller, supporting data rates of up to 10Gbps ■ Compliant with IEEE 802.3an standard ■ Compliant with IEEE 1588 standard (Precision Time Protocol/PTP) ■ Supports IEEE 802.1Q VLAN standard ■ Supports jumbo frames of up to 9728 bytes and link aggregation ■ Wake-on-LAN (WoL) and PXE support ■ Equipped with power management for Intel Ethernet ■ Compatible with Intel Data Direct I/O Technology (DDIO) ■ Available in low-profile and standard (full-height) form factors ■ Operating temperature range guaranteed from -40°C to 55°C
Expansion card compatible with PCIe ×4 slot (Gen2), equipped with a maximum of 8 USB 3.0 ports.
Features ■ Supports PCIe ×4 slot (Gen2) ■ Equipped with 8 USB 3.0 ports with independent controller ■ Current limit settings of 900mA/1500mA are possible ■ Compliant with USB 3.0 standard and xHCI standard, Rev 1.0 ■ Optional addition of software programmable port for power ON/OFF control ■ Operating temperature range of 0℃ to 70℃
ADLINK, 4CH 10/12Bit 20MS/s simultaneous sampling analog input
【ADLINK PCI-9812 Features】 ■ PCI bus compatible 32bit 5V (PCI-9812) ■ Supports simultaneous sampling with a maximum of 20MS/s and 12-bit resolution (4 channels) ■ Programmable input range ±1V / ±5V (input impedance of 50Ω / 1.25kΩ / 15MΩ) ■ Equipped with bus master DMA for high-speed data transfer ■ 32k sample FIFO for A/D sampling (prevents data loss) ■ Operating temperature range: 0 to 40℃ ■ I/O connectors: BNC×5, 10-pin ribbon (male) ■ Power supply: +5V / 1.4A, size: 173 × 108 mm
ADLINK, 96CH Parallel Digital Input/Output (DIO)
【ADLINK PCIe-7396 Features】 ■ 32-Bit 5 V PCI Express (x4) bus compatible, ideal for high-speed data transfer ■ 96CH parallel digital input/output (DIO) ■ High drive capability: sink maximum 48mA / source maximum 15mA ■ Emulates industry-standard 8255 PPI (mode 0) for 4/2 units ■ Each port can be individually configured as input/output ■ Supports external latch signal for digital input ■ Output status reading function ■ Compatible with known power-on state ■ Onboard 8254 timer/counter chip ■ 1-channel 16-bit external event counter ■ Interrupt generation via 1-channel 32-bit timer ■ Change of state (COS) interrupt support ■ Multiple programmable interrupt sources ■ Compact half-size PCI card
Intel Arc A380E, 6GB GDDR6, PCIe x8 Gen4, PCI Express graphics card
【ADLINK EGX-PCIE-A380E Features】 ■ Equipped with Intel ARC A380E GPU (Alchemist architecture) ■ Low-profile & single-slot design ■ PCIe Gen4 x8 interface ■ 6GB GDDR6 memory (bandwidth: 186 GB/s) ■ 4 × Mini DisplayPort (mDP) outputs ■ Low power consumption design: 50W ■ Supported technologies: Intel OpenVINO, DirectX 12, Vulkan 1.3, OpenGL 4.6, OpenCL 3.0 ■ Driver support for Windows 11 / Linux (64-bit)
PCI bus card type 8-axis position command pulse output card
The motion card "JOY-RT8 series" can achieve synchronous control of up to 40 axes at 1 ms when combined with the motion controller software "MOTIWARE" from Prime Motion Co., Ltd. Additionally, it can realize a variety of special motions.
Options such as sign panels are also available! Ideal plastic cards for medical examination tickets and membership cards.
"Plastic cards" are cards made from rigid PVC or PET-G materials, typically represented by cash cards and credit cards. They are widely used in various fields and applications, including membership cards and medical examination cards. [Main Optional Processing] - Signature panel - Magnetic stripe - Encoding - Variable information printing - Embossing, etc. *For more details, please refer to the catalog. Feel free to contact us with any inquiries.
The replacement of variable images is easy, making it ideal for employee ID cards and similar uses! Cards can be produced at low cost and with a short lead time.
The "Digital Print Card" is a card that utilizes full-color digital printing to incorporate variable image information in ways not possible before, allowing for card designs that are not limited by the number of colors. It significantly reduces printing preparation time without the need for creating plates, enabling small lot production and achieving short delivery times and low costs, making it suitable for an information-oriented society. It is also easy to replace variable images such as facial photos, making it widely used for employee IDs and qualification certificates. 【Features】 ■ Produced with full-color digital printing machines ■ High-quality cards produced at low cost and with short delivery times ■ Easy replacement of variable images ■ Ideal for employee IDs and qualification certificates *For more details, please refer to the catalog. Feel free to contact us with any inquiries.
You can carry it as a keychain! A card that allows you to accumulate points with a common barcode.
The "Parent-Child Card" is a card composed of multiple pieces that share a common barcode. Since the three cards for the parent and children share the same barcode, it is possible to accumulate points, and it can be produced at a lower cost than issuing multiple family cards. The parent card is the same size as a credit card, and the child card can also be used as a keychain, making it convenient to carry. 【Features】 ■ Composed of multiple pieces with a common barcode ■ Points can be accumulated ■ Can be produced at a lower cost than issuing multiple pieces ■ Child card can also be used as a keychain *For more details, please refer to the catalog. Feel free to contact us with any inquiries.
We propose cards that suit your intended use! You can choose from printing to recording methods.
The "cards" handled by the Japan Management Label come in many varieties due to differences in material, printing method, recording method, size, and more. We propose cards that suit our customers' intended use. If you are unsure about selecting a card, please feel free to consult us. *For more details, please refer to the catalog. Feel free to contact us as well.
Easily laminate on the spot! Cards that can be completed without any equipment.
The "Half Laminated Card" is a card that can be easily laminated on the spot after writing names or attaching facial photos. No equipment such as a laminating machine is required for the lamination process. Additionally, the base material is made of plastic, making it strong against water and bending, and it has excellent durability. 【Features】 ■ No laminating machine required ■ Excellent durability *For more details, please refer to the catalog. Feel free to contact us with any inquiries.
Library IC card that can be laminated and embedded with RFID inlets.
The Japan Management Label offers various types of "Library Use Cards." After filling in details such as your name and attaching a photo, you can easily laminate it on the spot with our "Half Laminated Card," as well as options like the "Rewrite Card," which allows you to change the information displayed on the card. 【Lineup】 ■ Half Laminated Card ■ Rewrite Card ■ Plastic Card ■ Contactless Card *For more details, please refer to the catalog or feel free to contact us.
An ideal contactless IC card for entry and exit management, public transportation, and membership or employee identification!
A "contactless IC card" is a card that has an RFID inlay (IC chip with antenna) embedded in it. We manufacture contactless IC cards such as Mifare cards, FeliCa cards, I-CODE SLI cards, and Tag-it cards according to your preferences. They are ideal for various applications such as access control, public transportation, membership cards, employee ID cards, and entry passes. 【Product Lineup】 ■Standard Products ■Combo Cards ■Key Tag Cards ■Clamshell Cards *For more details, please refer to the catalog or feel free to contact us.
A card with a detachable barcode label that enables speedy membership registration!
The "Peelable Barcode Label Card" has a barcode label pre-attached to the point card, which is then replaced with the barcode label on the membership application form during the enrollment process. Since it uses a low-adhesive material, there is no residue left on the card. To make it easy to peel off during the enrollment process, it is attached to the card while leaving the release paper intact. 【Features】 ■ Uses low-adhesive material ■ No residue left on the card ■ Prevents mismatching between the card and the membership application form ■ Makes the enrollment process faster *For more details, please refer to the catalog or feel free to contact us.
