Last Updated： Aggregation Period:Feb 04, 2026～Mar 03, 2026
This ranking is based on the number of page views on our site.
1～30 item / All 202 items
96/48CH Opto-22 Compatible Digital Input/Output
Features ■ PCI Express [x1] interface ■ 48/96-CH digital TTL/DTL input/output ■ Emulates 4/2/1 industry-standard 8255 PPI (Mode 0) ■ Direct interface with OPTO-22 compatible I/O modules ■ Output port status feedback ■ Onboard 8254 timer/counter chip ■ Programmable interrupt source ■ Supports Windows 7/8 X64/X86 and Windows 2008 R2
4CH 12Bit Maximum 80MS/s Digitizer
Features ◾ Maximum 80MS/s sampling and support for 4-channel simultaneous analog input ◾ High-resolution 12-bit ADC ◾ Analog input (maximum bandwidth 40MHz) with 1GB storage memory ◾ Input voltage range (programmable): ±0.5V, ±1V, ±5V, ±10V ◾ High-speed data streaming support via DMA data transfer scatter-gather ◾ Provides 10/20MHz digital onboard filter (FPGA) ◾ Provides PLL module for accurate synchronization
96/48/24CH Opto-22 compatible TTL digital input/output
Features ■ Supports 32-bit, 5V PCI bus ■ 24/48/96 CH digital TTL/DTL input/output ■ Emulates 4/2/1 industry-standard 8255 PPI (Mode 0) ■ Supports Windows 7/8 X64/X86 and Windows 2008 R2 ■ Output port status feedback ■ Onboard 8254 timer/counter chip ■ Programmable interrupt source ■ (Direct interface with OPTO-22) Provides 12V and 5V power supply to OPTO-22
8CH 12Bit Isolated D/A Conversion
Features - Supports 32-bit, 5V PCI bus - Isolated 8-CH 12-bit voltage output - 2500VRMS optical isolation - Jumper-selectable bipolar and unipolar output ranges - 4-CH isolated DI, 4-CH isolated DO - Current output version available on PCI-6308A
48CH Digital Input/Output & Timer/Counter
■PXI PICMG2.0 Rev2.1 compliant (cPCI-7248) ■16-CH isolated input & 16-CH isolated output (PCI-7230, LPCIe-7230, cPCI-7230) ■32-CH isolated input (PCI-7233) ■32-CH isolated output (PCI-7234) ■Input section isolation withstand voltage 5000VRMS (PCI-7230, PCI-7233) ■Output section maximum sink current 500mA (PCI-7230, PCI-7234)
10CH Timer, Counter & 8CH Digital Input/Output Card
■32 bit 5V PCI bus (PCI series) ■Compliant with PXI PICMG2.0 Rev2.1 (cPCI-8554) ■16-CH isolated input & 16-CH isolated output (PCI-7230, LPCIe-7230, cPCI-7230) ■32-CH isolated input (PCI-7233) ■32-CH isolated output (PCI-7234) ■Input section isolation withstand voltage 5000VRMS (PCI-7230, PCI-7233) ■Output section maximum sink current 500mA (PCI-7230, PCI-7234)
48/96CH High Drive Digital Input/Output Card
■32 bit 5V PCI bus (PCI series) ■16-CH isolated input & 16-CH isolated output (PCI-7230, LPCIe-7230, cPCI-7230) ■32-CH isolated input (PCI-7233) ■32-CH isolated output (PCI-7234) ■Input section: isolation withstand voltage 5000VRMS (PCI-7230, PCI-7233) ■Output section: maximum sink current 500mA (PCI-7230, PCI-7234)
96CH TTL Digital Input/Output
Features ■ Output port status feedback ■ Port configuration that can be set as input or output ■ High drive capability, up to 48mA (sink) and 15mA (source) ■ 48/96CH digital TTL input/output ■ Supports 32-bit, 5V PCI bus ■ Onboard 8254 timer/counter chip ■ Change of State (COS) interrupt ■ Multiple programmable interrupt sources
32-CH Insulated Digital Input/Output Card
■32 bit 5V PCI bus (PCI series) ■PCI Express x1 interface (LPCIe-7230) ■Compliant with PXI PICMG2.0 Rev2.1 (cPCI-7230) ■16-CH isolated input & 16-CH isolated output (PCI-7230, LPCIe-7230, cPCI-7230) ■32-CH isolated input (PCI-7233) ■32-CH isolated output (PCI-7234) ■Input section isolation withstand voltage 5000VRMS (PCI-7230, PCI-7233) ■Output section maximum sink current 500mA (PCI-7230, PCI-7234)
128-CH Insulated Digital Input/Output Card
■32 bit 3.3V & 5V PCI bus ■64-CH isolated input & 64-CH isolated output (PCI-7442) ■128-CH isolated input (PCI-7443) ■128-CH isolated output (PCI-7444) ■Input section: isolation withstand voltage 1250VRMS ■Output section: maximum sink current 300mA
64-CH Insulated Digital Input/Output Card
Features ■ 32 bit 5V PCI bus (PCI-7432/7433/7434) ■ 32-channel isolated input & 32-channel isolated output (PCI-7432 & PCI-7432HIR) ■ 64-channel isolated input (PCI-7433 & PCI-7433HIR) ■ 64-channel isolated output (PCI-7434) ■ Input section isolation withstand voltage 2500VRMS (PCI-7432, PCI-7433) ■ Output section maximum sink current 500mA (PCI-7432, PCI-7434)
Insulated 8-point output card using photomos relays.
Insulated 8-point output card using photomos relays ■□■Features■□■ ■Contact capacity: DC60V 400mA, capable of handling outputs with different polarities on a common ground divided into two systems. *Crimping punch is required for wiring of this product. ■Compact card size (50mm × 30mm) *excluding connectors ■Equipped with 8 photomos relay outputs (DC60V 400mA) ■Equipped with 8 monitor LEDs ■5V input → 3.3V power circuit included ■Adopts MI II wiring system ■Fuse installation available as an option ■For other functions and details, please download the catalog or contact us.
ADLINK, 96CH Parallel Digital Input/Output (DIO)
【ADLINK PCIe-7396 Features】 ■ 32-Bit 5 V PCI Express (x4) bus compatible, ideal for high-speed data transfer ■ 96CH parallel digital input/output (DIO) ■ High drive capability: sink maximum 48mA / source maximum 15mA ■ Emulates industry-standard 8255 PPI (mode 0) for 4/2 units ■ Each port can be individually configured as input/output ■ Supports external latch signal for digital input ■ Output status reading function ■ Compatible with known power-on state ■ Onboard 8254 timer/counter chip ■ 1-channel 16-bit external event counter ■ Interrupt generation via 1-channel 32-bit timer ■ Change of state (COS) interrupt support ■ Multiple programmable interrupt sources ■ Compact half-size PCI card
PCIe Time Synchronization Module
Provides accurate time to the host computer with zero latency. Supports various synchronization inputs such as IRIG A, B, NASA 36, and 1PPS. The onboard μprocessor monitors errors due to propagation delays. The user-programmable generator provides heartbeat timing to the host. Windows 10 support (WHQL certified drivers available). * We also offer bus-level timing cards for PCI, cPCI, PMC, and VME. Please feel free to contact us.
8CH High Power Relay & 8CH Isolated Digital Input Module
Features - 8-channel high-power relay output (5A @ 250VAC or 30VDC) - 8-channel AC filter isolated digital input - 1-channel emergency stop input - Pluggable connector for high current input - Supports universal, 32-bit, 3.3V and 5V PCI bus - Initial state and safe state settings via DIP switches - Built-in watchdog timer
2-port CAN interface
Features - PICMG 2.0 Rev 2.1 - Operation of two independent CAN networks - Programmable transfer speed up to 1 Mbps - CAN controller frequency 16 MHz - 2500 VRMS optical isolation - Direct memory mapping to the CAN controller - Powerful master interface for CAN bus protocol - Rear I/O available on cPCI-7841R
Expansion card compatible with PCIe ×4 slot (Gen2), equipped with a maximum of 8 USB 3.0 ports.
Features ■ Supports PCIe ×4 slot (Gen2) ■ Equipped with 8 USB 3.0 ports with independent controller ■ Current limit settings of 900mA/1500mA are possible ■ Compliant with USB 3.0 standard and xHCI standard, Rev 1.0 ■ Optional addition of software programmable port for power ON/OFF control ■ Operating temperature range of 0℃ to 70℃
4/8/12-channel PCI Express x4 Gen3 USB3 Vision Top Performance Frame Grabber
Features ■ Compliant with PCI Express x4 Gen2 ■ USB 3.1 Gen 1 (same as USB 3.0), host controller compliant with Fresco FL1100 ■ 4/8 USB Type-A external ports (PCIe-U304 / U308) ■ Four additional internal USB 3.0 ports via pin header (only for PCIe-U312) ■ Up to 18W USB power from PCIe bus (default); up to 60W USB power supported via 4-pin Molex power connector ■ Current per port below 1500mA ■ Multiple cards and multiple cameras within a single system ■ User-friendly API provided for software-programmable power on/off per port
4CH 16Bit 1MS/s Analog Output & 16CH Isolated Digital Input & 16CH Isolated Digital Output
Features ■ 32-bit PCI bus (3.3V/5V) support ■ Hardware-based waveform generation ■ DNL less than 1 LSB ■ Trigger for digital waveform generation ■ 16-CH isolated digital input & 16-CH isolated digital output ■ 8-CH TTL DI and 8-CH TTL DO ■ 2-CH timer/counter, base clock: 40MHz ■ 4-CH PWM output ■ 3-CH encoder input supporting AB phase and CW/CCW ■ Supports synchronization of multiple cards via SSI bus (system synchronization interface)
8CH 24Bit Maximum 192KS/s Simultaneous Sampling Analog Input Module
Features ◾ 24-bit Sigma-Delta ADC ◾ 8CH simultaneous analog input ◾ Maximum sampling rate 192KS/s ◾ Input range ±1V - 10V ◾ Dynamic range 110dB ◾ Anti-aliasing filter ◾ Input coupling AC/DC (software selectable) ◾ IEPE - 4mA (software configurable)
8CH 24Bit Maximum 192KS/s Simultaneous Sampling Analog Input Module
Features ◾ 24-bit Sigma-Delta ADC ◾ 8CH simultaneous analog input ◾ Maximum sampling rate 192KS/s ◾ Input range ±1V - 10V ◾ Dynamic range 110dB ◾ Anti-aliasing filter ◾ Input coupling AC/DC (software selectable) ◾ IEPE - 4mA (software configurable)
12MB/s high speed 32CH digital input & 32CH digital output
Features - Supports 32-bit, 5V PCI bus - 32-CH DI and 32-CH DO - Maximum data transfer speed: 12Mbytes/s - Onboard internal timer pacer for clock-driven DIO - ACK and REQ signals for handshaking data transfer - Bus mastering DMA data transfer
12MB/s high speed 32CH digital input & 32CH digital output
Features - PCI Express [x1] interface - 32-CH TTL digital input & 32-CH TTL digital output - Transfer speed: up to 12MB/s - Programmable timer pacer clock on board - Supports handshake transfer mode for digital I/O - Bus mastering DMA for both digital input and output - 5V power available via connector - Compact half-size PCB
High-performance IEEE 488 GPIB interface with 1.5MB/s data transfer.
Features - Supports 32-bit 3.3V/5V PCI bus - Low-profile PCI MD1 form factor - Fully compatible with IEEE 488 standard - Data transfer rate: up to 1.5MB/s - Built-in 2KB FIFO read/write operations - Provides API compatible with NI-488.2* driver software - Supports industrial standard VISA library - Interactive utility for testing and diagnostics
8CH relay output (4 SPDT & 4 SPST) & 8CH isolated digital input
Features - Supports 32-bit, 5V PCI bus - PCI-7250 has 8-channel relay output - 8-channel isolated digital input - LED indicators for on-board relay status - On-board relay drive circuit - Statistical feedback for relay output - Low-pass filter processing for on-board digital input - PCI-7250 is expandable, allowing up to 32-channel relay output and 32-channel digital input with three PCI-7251 units
Supports 2-wire sensor signals! Optical isolation input card
A card that uses a photocoupler to provide isolated input for external 24V signals. ■□■Features■□■ ■Supports 2-wire sensor inputs, with output connectable to 3.3V / 5V TTL inputs. *Requires a crimping punch for wiring. ■Compact card size (50mm x 30mm) excluding connectors. ■Photocoupler isolation with support for 8-point input (DC24V). ■Equipped with 8 monitoring LEDs. ■5V input with a 3.3V power circuit. ■Adopts Mi II wiring system. ■Compatible with 2-wire sensors (sensor leakage current below 1mA). ■For other functions and details, please download the catalog or contact us.
32-bit/66 MHz high speed
◾High-speed PCI Express X1 interface ◾Extension distance: up to 7 meters (extension cables: 1M, 3M, 7M) ◾Comprehensive hardware and software transparency
![4-Port USB 3.0 Expansion Card [PER-T479]](https://image.mono.ipros.com/public/product/image/5ba/2000385490/IPROS37415222761637489547.jpeg?w=280&h=280)
PCIe(4) specification 4-port USB 3.0 (USB 3.2 Gen 1) expansion card
The 4-port USB 3.0 (USB 3.2 Gen 1) expansion card features the following: ● Compliant with PCIe [x4] Gen. 2 ● Four independent USB 3.0 host controllers ● Each port supports a bandwidth of 5 Gb/s ● Locking USB connectors
A card equipped with two contact-type relays.
A contact relay card that can drive various external loads using outputs from low-voltage devices such as CPUs and FPGAs. ■□■ Features ■□■ ■ Contact capacity: AC125V 1A is possible ■ Both A and B contacts are connected to the connector, allowing for selection based on application * A crimping punch is required for wiring this product ■ Compact card size (50mm x 30mm) *excluding connector ■ Equipped with 2 miniature relays (AC125V 1A) ■ Equipped with 2 monitor LEDs ■ 5V input → 3.3V power circuit included ■ MI II wiring system adopted ■ Relay is driven with isolation via a photocoupler (18mA required) ■ For other functions and details, please download the catalog or contact us.
32-bit/66 MHz high-speed interface card
- PXI-based control - Direct control of PXI systems - Supports 32-bit/66MHz PCI interface - Maximum extension distance of 7 meters (with 1M extension cable, 3M, and 7M) - Comprehensive hardware and software transparency
