Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.
16～30 item / All 187 items
2-port CAN interface
Features - PICMG 2.0 Rev 2.1 - Operation of two independent CAN networks - Programmable transfer speed up to 1 Mbps - CAN controller frequency 16 MHz - 2500 VRMS optical isolation - Direct memory mapping to the CAN controller - Powerful master interface for CAN bus protocol - Rear I/O available on cPCI-7841R
Expansion card compatible with PCIe ×4 slot (Gen2), equipped with a maximum of 8 USB 3.0 ports.
Features ■ Supports PCIe ×4 slot (Gen2) ■ Equipped with 8 USB 3.0 ports with independent controller ■ Current limit settings of 900mA/1500mA are possible ■ Compliant with USB 3.0 standard and xHCI standard, Rev 1.0 ■ Optional addition of software programmable port for power ON/OFF control ■ Operating temperature range of 0℃ to 70℃
4/8/12-channel PCI Express x4 Gen3 USB3 Vision Top Performance Frame Grabber
Features ■ Compliant with PCI Express x4 Gen2 ■ USB 3.1 Gen 1 (same as USB 3.0), host controller compliant with Fresco FL1100 ■ 4/8 USB Type-A external ports (PCIe-U304 / U308) ■ Four additional internal USB 3.0 ports via pin header (only for PCIe-U312) ■ Up to 18W USB power from PCIe bus (default); up to 60W USB power supported via 4-pin Molex power connector ■ Current per port below 1500mA ■ Multiple cards and multiple cameras within a single system ■ User-friendly API provided for software-programmable power on/off per port
4CH 16Bit 1MS/s Analog Output & 16CH Isolated Digital Input & 16CH Isolated Digital Output
Features ■ 32-bit PCI bus (3.3V/5V) support ■ Hardware-based waveform generation ■ DNL less than 1 LSB ■ Trigger for digital waveform generation ■ 16-CH isolated digital input & 16-CH isolated digital output ■ 8-CH TTL DI and 8-CH TTL DO ■ 2-CH timer/counter, base clock: 40MHz ■ 4-CH PWM output ■ 3-CH encoder input supporting AB phase and CW/CCW ■ Supports synchronization of multiple cards via SSI bus (system synchronization interface)
8CH 24Bit Maximum 192KS/s Simultaneous Sampling Analog Input Module
Features ◾ 24-bit Sigma-Delta ADC ◾ 8CH simultaneous analog input ◾ Maximum sampling rate 192KS/s ◾ Input range ±1V - 10V ◾ Dynamic range 110dB ◾ Anti-aliasing filter ◾ Input coupling AC/DC (software selectable) ◾ IEPE - 4mA (software configurable)
8CH 24Bit Maximum 192KS/s Simultaneous Sampling Analog Input Module
Features ◾ 24-bit Sigma-Delta ADC ◾ 8CH simultaneous analog input ◾ Maximum sampling rate 192KS/s ◾ Input range ±1V - 10V ◾ Dynamic range 110dB ◾ Anti-aliasing filter ◾ Input coupling AC/DC (software selectable) ◾ IEPE - 4mA (software configurable)
12MB/s high speed 32CH digital input & 32CH digital output
Features - Supports 32-bit, 5V PCI bus - 32-CH DI and 32-CH DO - Maximum data transfer speed: 12Mbytes/s - Onboard internal timer pacer for clock-driven DIO - ACK and REQ signals for handshaking data transfer - Bus mastering DMA data transfer
12MB/s high speed 32CH digital input & 32CH digital output
Features - PCI Express [x1] interface - 32-CH TTL digital input & 32-CH TTL digital output - Transfer speed: up to 12MB/s - Programmable timer pacer clock on board - Supports handshake transfer mode for digital I/O - Bus mastering DMA for both digital input and output - 5V power available via connector - Compact half-size PCB
Supports 2-wire sensor signals! Optical isolation input card
A card that uses a photocoupler to provide isolated input for external 24V signals. ■□■Features■□■ ■Supports 2-wire sensor inputs, with output connectable to 3.3V / 5V TTL inputs. *Requires a crimping punch for wiring. ■Compact card size (50mm x 30mm) excluding connectors. ■Photocoupler isolation with support for 8-point input (DC24V). ■Equipped with 8 monitoring LEDs. ■5V input with a 3.3V power circuit. ■Adopts Mi II wiring system. ■Compatible with 2-wire sensors (sensor leakage current below 1mA). ■For other functions and details, please download the catalog or contact us.
High-performance IEEE 488 GPIB interface with 1.5MB/s data transfer.
Features - Supports 32-bit 3.3V/5V PCI bus - Low-profile PCI MD1 form factor - Fully compatible with IEEE 488 standard - Data transfer rate: up to 1.5MB/s - Built-in 2KB FIFO read/write operations - Provides API compatible with NI-488.2* driver software - Supports industrial standard VISA library - Interactive utility for testing and diagnostics
32-bit/66 MHz high speed
◾High-speed PCI Express X1 interface ◾Extension distance: up to 7 meters (extension cables: 1M, 3M, 7M) ◾Comprehensive hardware and software transparency
8CH relay output (4 SPDT & 4 SPST) & 8CH isolated digital input
Features - Supports 32-bit, 5V PCI bus - PCI-7250 has 8-channel relay output - 8-channel isolated digital input - LED indicators for on-board relay status - On-board relay drive circuit - Statistical feedback for relay output - Low-pass filter processing for on-board digital input - PCI-7250 is expandable, allowing up to 32-channel relay output and 32-channel digital input with three PCI-7251 units
![4-Port USB 3.0 Expansion Card [PER-T479]](https://image.mono.ipros.com/public/product/image/5ba/2000385490/IPROS37415222761637489547.jpeg?w=280&h=280)
PCIe(4) specification 4-port USB 3.0 (USB 3.2 Gen 1) expansion card
The 4-port USB 3.0 (USB 3.2 Gen 1) expansion card features the following: ● Compliant with PCIe [x4] Gen. 2 ● Four independent USB 3.0 host controllers ● Each port supports a bandwidth of 5 Gb/s ● Locking USB connectors
A card equipped with two contact-type relays.
A contact relay card that can drive various external loads using outputs from low-voltage devices such as CPUs and FPGAs. ■□■ Features ■□■ ■ Contact capacity: AC125V 1A is possible ■ Both A and B contacts are connected to the connector, allowing for selection based on application * A crimping punch is required for wiring this product ■ Compact card size (50mm x 30mm) *excluding connector ■ Equipped with 2 miniature relays (AC125V 1A) ■ Equipped with 2 monitor LEDs ■ 5V input → 3.3V power circuit included ■ MI II wiring system adopted ■ Relay is driven with isolation via a photocoupler (18mA required) ■ For other functions and details, please download the catalog or contact us.
32-bit/66 MHz high-speed interface card
- PXI-based control - Direct control of PXI systems - Supports 32-bit/66MHz PCI interface - Maximum extension distance of 7 meters (with 1M extension cable, 3M, and 7M) - Comprehensive hardware and software transparency
