Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.
106～120 item / All 143 items
A key board for realizing IoT (Internet of Things) applications.
The FMC-IOT daughter card provides a set of peripherals and interfaces commonly used in embedded designs, serving as a key to realizing IoT (Internet-of-Things) applications. Various wireless communication standards are available for use in such designs. This board enables prototyping using either Wi-Fi, Bluetooth, ZigBee, sub-GHz RF devices, wired Ethernet, or USB.
You can add wireless LAN and Bluetooth to compatible barebone systems and computers.
The "WLN-M" is an expansion card compatible with barebones and computers equipped with an M.2 (2230) slot. It comes with two types of antenna cables: one for slim models (21cm and 29cm) and one for cube models (53cm x 2). Since it fits inside the body, it looks more streamlined compared to USB-connected wireless LAN cards, and it also helps prevent theft. 【Features】 ■ Complies with IEEE 802.11ac standards, enabling high-speed wireless communication ■ Supports Bluetooth version 4.0, allowing for wireless connections ■ Comes with two antennas that can be freely adjusted for optimal signal reception angles *For more details, please refer to the related links or feel free to contact us.
Leave it to us for technical consulting in semiconductor, LCD, and electronic component manufacturing!
Kanematsu PWS Corporation is a company primarily engaged in the development, design, manufacturing, and sales of semiconductor manufacturing and inspection equipment. Our main products include equipment-related units and parts such as "wafer probe cards," "polishing films," and "Post CMP Blush." In addition, we provide technical services such as the design and manufacturing of various labor-saving devices, installation and maintenance of our own equipment, and imported semiconductor manufacturing and inspection equipment. Please feel free to contact us if you have any requests. 【Business Introduction】 ■ Development, design, manufacturing, and sales of semiconductor manufacturing/inspection equipment ■ Technical services ■ Sales, brokerage, maintenance services, setup, and modification of used semiconductor manufacturing equipment *For more details, please refer to our catalog or feel free to contact us.
2CH 14Bit Maximum 200MS/s Digitizer
Features ◾ Maximum sampling rate of 200 MS/s ◾ High-resolution 14-bit ADC ◾ Analog input (up to 90 MHz bandwidth) ◾ 1GB onboard storage memory ◾ High-speed PCI Express x4 bus interface ◾ Scatter-Gather DMA data transfer for high-speed data streaming ◾ Digital trigger input/output terminals
The memory uses SLC! Introducing industrial PCMCIA ATA cards.
At A&F Corporation, we handle the 'ATA-68SI' compliant with PCMCIA/IDE. It supports CF-ATA commands and enables high-speed data transfer. Additionally, it uses SLC memory. We also offer other models such as "MDM-0VUD" and "MDM-0VSI," so please feel free to contact us if you need them. 【ATA-68SI Features】 ■ Compliant with PCMCIA/IDE ■ Compliant with CompactFlash Specification Version 3.x ■ Supports CF-ATA commands ■ Supports SMART functionality for lifespan monitoring ■ Supports Static and Dynamic Wear Leveling *For more details, please download the PDF or feel free to contact us.
High-performance IEEE 488 GPIB interface with 1.5MB/s data transfer.
Features - Supports 32-bit 3.3V/5V PCI bus - Low-profile PCI MD1 form factor - Fully compatible with IEEE 488 standard - Data transfer rate: up to 1.5MB/s - Built-in 2KB FIFO read/write operations - Provides API compatible with NI-488.2* driver software - Supports industrial standard VISA library - Interactive utility for testing and diagnostics
This is an industrial CF card compatible with OEM.
This is a high-speed (600x or 900x) industrial-grade CF card. It is an ideal high-speed CF card for industrial equipment such as aircraft equipment, helicopters, medical devices, slot machines, gaming devices, and embedded devices. Of course, BOM fixation is possible, and changes to S/N, ID, and labels are also available.
XMC providing 2-channel 10GBase-T Ethernet and 2-channel SFP+ 10 Gigabit Ethernet interfaces.
TXMC897 is a switched mezzanine card (XMC) compatible module that provides 2-channel 100Base-TX / 1000Base-T / 2.5GBase-T / 5GBase-T / 10GBase-T Ethernet and 2-channel extended small form-factor pluggable (SFP+) 10 Gigabit Ethernet interfaces. The XMC connector P15 provides access to the Intel X710-TM4/AT2 quad/dual-port 10GbE controller via an x8/x4 PCIe link. The two Ethernet interfaces support transmission speeds of 100, 1000 Mbit/s, and 2.5, 5, 10 Gbit/s, and the two SFP+ cages accept various SFP and SFP+ transceiver modules. These two SFP+ hosts are connected to the SFI interface of the Ethernet controller.
4-port/2-port server-grade PoE+ frame grabber card!
Machine vision, circuit board appearance inspection equipment, monitoring, medical, and transportation are being used. ■Features - Manufacturer: Neousys - x4, Gen2 PCI Express interface offering 2GB/s total bandwidth - Supports four (354at) or two (352at) independent GigE Ports - Compliant with IEEE 802.3at to deliver 25.5 W each port - Supports 9.5 kB jumbo frame, teaming, and IEEE 1588 - Per-port PoE+ power on/off control Neousys is a manufacturer of reliable embedded products for industrial applications. Our company, Helvetia, has a cooperative relationship as a domestic agent in Japan and has a proven track record of delivering many embedded products to domestic manufacturers.
Visualization of infrared light from 700 to 1700 nm through electronic trapping!!!
The IR sensor card (infrared sensor card) is laminated and is the most common product in the IR sensor series. It emits visible light from the area where infrared is irradiated. The letter R (reflective) at the end of the model number indicates that the IR beam image is displayed only on the front side of the card (the irradiated side). The letter T (transmissive or translucent) at the end of the model number indicates that the IR beam image is displayed on both sides of the card. At the same infrared intensity, the R type card provides a clearer image due to the backing of reflected light. The phosphor layer is laminated between transparent plastics suitable for various near-infrared detection and imaging applications.
![[Information] Understanding RFID and IC Tags through Manga](https://image.mono.ipros.com/public/product/image/325/2000359030/IPROS09569155305008112769.jpeg?w=280&h=280)
Rich manufacturing of IC cards/tags! RFID designs tailored to your needs, including installation environment and budget!
"RFID," which is used in various fields such as engineering management and inventory management in logistics, is a focus of our company. In addition to manufacturing and developing IC cards and IC tags, we offer total solutions utilizing RFID. Currently, we are giving away materials that introduce RFID through manga. You can view them immediately from the [Download] link. [Contents] ■ What is an RFID tag (IC tag)? ■ About communication distance ■ Points to consider when implementing ■ Examples of RFID implementation [Related Articles] Knowledge of electronic tags you may be hesitant to ask about: "What is an IC tag?" https://www.ipros.jp/product/detail/2000404918 Applications of NFC tags https://www.ipros.jp/product/detail/2000354615
![2-Port Industrial 10GbE LAN Expansion Card [PER-T514]](https://image.mono.ipros.com/public/product/image/de6/2000434071/IPROS78841506179062492779.jpeg?w=280&h=280)
PCIe(4) standard 2-port industrial 10GbE LAN expansion card
The 2-port 10GbE LAN expansion card has the following features: ● Compliant with PCIe [x4] Gen. 2 ● Equipped with Intel(R) x550 controller, 10GbE Ethernet LAN with 2 ports ● Compatible with CAT-6/6a RJ45 cables ● Supports CAT-5/5e cables, compatible with 1000BASE-T and NBASE-T ● Supports 15.5 KB jumbo frames, NIC teaming, and IEEE 1588
Enhance the security level with fingerprint authentication while using your current IC card for entry and exit!
By introducing the ATKey.Card, the following can be achieved! - You can easily upgrade the security level with fingerprint authentication while keeping the existing IC card access control system. - Fingerprint registration can be done using only the card, without the need for a computer, allowing for immediate use. - Even if the card is lost, you can use it with peace of mind since NFC will not be activated unless fingerprint authentication is performed. - It is possible to prevent impersonation through the transfer of IC cards to others.
