We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for center.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

center Product List and Ranking from 450 Manufacturers, Suppliers and Companies

Last Updated： Aggregation Period:Dec 24, 2025～Jan 20, 2026
This ranking is based on the number of page views on our site.

center Manufacturer, Suppliers and Company Rankings

Last Updated： Aggregation Period:Dec 24, 2025～Jan 20, 2026
This ranking is based on the number of page views on our site.

  1. Nishijima Corporation Aichi//Industrial Machinery
  2. ビエッセジャパン Osaka//Industrial Machinery
  3. ブラザー工業 マシナリー事業 Aichi//Industrial Machinery
  4. 4 西田機械工作所 Osaka//Industrial Machinery
  5. 5 システムクリエイト Osaka//Industrial Machinery
Go to Company Ranking

center Product ranking

Last Updated： Aggregation Period:Dec 24, 2025～Jan 20, 2026
This ranking is based on the number of page views on our site.

  1. Column feed type machining center "NMX series" Nishijima Corporation
  2. [Used Machine Tools and Pressing Sheet Metal Machinery Purchase and Sale] Please feel free to consult with us! ダイイチテクノス 本社
  3. Fully Automatic Machining Center 'TTMC' アルム
  4. 4 Horizontal Machining Center 'NHL-3' *BT30, NC5-46, etc. 西田機械工作所
  5. 5 Horizontal Machining Center "RM H Series" ホーコス

center Product List

496～510 item / All 1091 items

Displayed results
[Sold Out] U500Xd1

[Sold Out] U500Xd1

Achieving multi-faceted processing that changes the common sense of number 30 through a combination of 28 magazines!

The "U Series" is a compact machining center that enables flexible indexing and process integration. Equipped with a newly developed inclined rotary table with a maximum diameter of 500 in the fixture area, it achieves multi-surface machining that changes the conventional understanding of category 30 through a combination of a 28-tool magazine. Additionally, by optimizing and speeding up the spindle start/stop, Z-axis movement, and magazine operation, it allows for high-speed tool changes, enabling tool exchanges for tools weighing up to 3 kg in the shortest time, and for tools weighing up to 4 kg with minimal time increase. The control unit features intuitive operation via a touch panel, focusing on ease of use. 【Features】 ■ Machine Configuration Achieves process integration ■ Productivity Reduces waste through integrated mechatronics development ■ Machining Capability Supports a wide range of machining with a high-rigidity machine structure and high-efficiency spindle motor. It also features newly added tool tip point control, supporting simultaneous 5-axis machining. * * This function is available only for the U500Xd1-5AX. ■ NC Device Pursues ease of use with a 15-inch LCD touch panel.

  • U500Xd1_機械構成.jpg
  • U500Xd1_生産性.jpg
  • U500Xd1_加工能力.jpg
  • U500Xd1_NC装置.jpg
  • U500Xd1_信頼性・環境性能.jpg
  • Other machine tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Portal-type 5-axis machining center 'GT-45-5AX'

Portal-type 5-axis machining center 'GT-45-5AX'

High-speed, high-precision, and easy! Choose from high-performance control devices! Space-saving design 5-axis machining machine.

The "GT-45-5AX" is a 5-axis machining center with a gantry structure that allows for high-speed and high-precision 5-axis machining with easy operation. You can choose between control units from Heidenhain or Fanuc, and it supports machining functions such as "high-speed milling" and "nervous surface machining." Despite its space-saving design, it features a wide machining area and user-friendly opening and closing covers. It is ideal for machining molds, medical devices, semiconductors, optics, and automotive parts. 【Features】 ■ Standard equipped with a spindle that has a maximum rotation speed of 36,000 min-1 ■ High cost performance with Taiwanese manufacturing ■ Domestic and international after-sales service support ■ Capable of supporting the introduction of CAM and jigs for 5-axis machining *For more details, please download the catalog or contact us.

  • Other machine tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Gantry-type 5-axis machining center 'GTX-620'

Gantry-type 5-axis machining center 'GTX-620'

Achieved a 15% space-saving compared to conventional products (compared to our company)! A spacious 5-axis machining center for wide processing areas! Easy workpiece loading and unloading! Comprehensive catalog available now.

The "GTX-620" is a 5-axis machining center with a gantry structure that allows for high-speed and high-precision 5-axis machining with easy operation. It is designed with careful consideration of the structural requirements for 5-axis control machines. You can choose control devices from either Heidenhain or Fanuc, and it supports machining functions such as "high-speed milling" and "nervous surface machining." Despite its space-saving design, it features a wide machining area and an easy-to-use opening and closing cover. It is ideal for machining molds, medical devices, semiconductors, optics, and automotive parts. 【Features】 ■ Major components are made of Meehanite cast iron ■ X, Y, Z, B, and C axes are adjusted using laser measurement ■ The cover opening is wide, making it easy to load and unload workpieces ■ NC devices can be selected from Heidenhain or Fanuc ■ Ideal for rubber molds and die-cast molds ■ Achieves a 15% reduction in space compared to conventional models (compared to our products) *For more details, please download the catalog or contact us.

  • Other machine tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Machining Center ROBOT SYSTEM

Machining Center ROBOT SYSTEM

Are you considering the automation of your existing machining centers? A robotic system that contributes to increased productivity per person.

Are you considering the automation of your existing machining centers? This is a robot system that contributes to increasing productivity per person. 【Features】 1. It is possible to retrofit a robot system to existing machines (conditions need to be confirmed based on the NC model year, etc.). 2. We also propose combinations with automation units and jigs to effectively utilize the robot. 3. Is a robot necessary for loading and unloading long processing workpieces? In the medium term, automation can reduce the burden on operators and increase productivity per person! *For more details, please contact us.

  • Machining Center

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
MILLSTAR "BMV Vertical Machining Center" *Test machining available

MILLSTAR "BMV Vertical Machining Center" *Test machining available

This autumn, a custom machine with an angle head will land in Japan. It can process heavy workpieces in a stable condition! A machining center with an orthodox and robust structure.

The XYZ axis guide adopts a full-axis angular guide in the 'BMV Vertical Machining Center.' The Y-axis guide consists of four rails, minimizing overhang at the table edges, allowing for stable machining of heavy workpieces. Additionally, we offer a variety of spindle options. 【Features】 ■ Gear-equipped specification for high-efficiency machining. BT50 / 8,000 min.-1 (Option: 10,000 min.-1) ■ Built-in motor specification BT40 / 50 ■ Selectable NC devices - FANUC - MITSUBISHI - HEIDENHAIN ■ Additional options - Scale feedback (HEIDENHAIN) - Angle head unit (stored in ATC) - High column - Center through coolant - Other automation options Direct shipping to overseas factories is also possible. We also have attractive models such as 5-axis machines equipped with Heidenhain NC.

  • Plastic processing machines (cutting and rolling)

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Vertical Machining Center 'MILLSTAR BMV1200'

Vertical Machining Center 'MILLSTAR BMV1200'

User-friendly machine! The NC device adopts FANUC 0iMF-PLUS (simultaneous three-axis specification / 1μm setting)! *Exhibited at JIMTOF!

The "MILLSTAR BMV1200" is a vertical machining center that employs square guides on each slide. The Y-axis guide features a four-rail design, resulting in minimal overhang at the left and right ends of the table, allowing for stable machining. Additionally, it is equipped with a geared spindle and an ATC interchangeable angle head, making it a "user-friendly machine." 【Features】 ■ User-friendly machine ■ Square guides on each slide ■ Four-rail design for Y-axis guide ■ Minimal overhang at the left and right ends of the table for stable machining ■ Equipped with a geared spindle and an ATC interchangeable angle head ★ Exhibition Information ★ The manufacturer of MILLSTAR, "JIUH-YEH PRECISION MACHINERY CO., LTD.," will be exhibiting at JIMTOF. Exhibition Name: JIMTOF 2022 (31st Japan International Machine Tool Fair) Venue/Dates: November 8 (Tuesday) to November 13 (Sunday) Booth Number: E6022 (East Hall 6) We look forward to your visit. *For more details, please download the PDF or feel free to contact us.

  • Plastic processing machines (cutting and rolling)

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Vertical Machining Center 'YZ-500SGATC'

Vertical Machining Center 'YZ-500SGATC'

It is a memory random method while allowing pot number specification! Compatible with program operation.

The "YZ-500SGATC" is a vertical machining center that generates a large torque even at low speeds compared to direct drive systems, offering excellent economic efficiency. By placing the spindle motor, which reduces heat generation, far from the spindle, the product minimizes the impact of heat on precision. Additionally, it supports large programs such as mold processing through two types of DNC operation. 【Overview】 ■ Spindle Taper: No. 50 ■ Maximum Spindle Speed: 3000 min^-1 [4000 min^-1・6000 min^-1] ■ Table Working Area: 1600mm × 500mm ■ Table Load Capacity: Approximately 700kg *For more details, please refer to the PDF document or feel free to contact us.

  • Machining Center

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Vertical Machining Center 'YZ-502SGATC'

Vertical Machining Center 'YZ-502SGATC'

The sliding surface is finished with a chisel! The head reference surface uses a completely symmetrical box-shaped center guide system.

The "YZ-502SGATC" is a vertical machining center assembled with hand-finished guideways on each axis using scraping techniques. The wide, monolithic guideways promise long-term high precision maintenance. Additionally, it supports large programs for mold processing through two types of DNC operation. 【Overview】 ■ Spindle taper: No. 40 ■ Maximum spindle speed: 8500 min^-1 [10000 min^-1] ■ Table working area: 1600mm × 500mm ■ Table load capacity: approximately 700kg *For more details, please refer to the PDF document or feel free to contact us.

  • Machining Center

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High rigidity and high precision vertical machining center - MAC-Series

High rigidity and high precision vertical machining center - MAC-Series

Increased machine rigidity enables high-speed and heavy cutting of small and medium-sized parts!

The MAC-Series emphasizes high rigidity in all aspects, achieving high-speed heavy cutting and high precision. By improving machine rigidity, it enables high-speed and heavy cutting of medium to small parts, introducing a cost-effective machining center. 【Product Introduction】 ■MAC-V40 #40 Vertical Machining Center This machining center allows for high-speed and heavy cutting of medium to small parts due to improved machine rigidity, offering high reliability and cost performance. ■MAC-Y520 #40 Vertical Machining Center This low-cost machining center achieves #50 class machining strokes in a #40 format. Users of #40 machining centers and drill centers can make use of their existing tools. *For more details on each product, please visit our website or feel free to contact us.

  • Other machine tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Proposal for Automation Line for End Face Processing of Shaft and Bar Materials on Vertical Machining Centers.

Proposal for Automation Line for End Face Processing of Shaft and Bar Materials on Vertical Machining Centers.

Proposing automation in a space-saving manner! Automated production line for axle shafts and bar materials.

This is an automatic production system machining machine for end face processing of long workpieces such as axle shafts, set up with jigs and automatic transport based on a machining center. We will deliver it in a form that incorporates machining machines, jigs, pneumatic and hydraulic equipment, coolant systems, and automatic transport. We recommend it to customers considering stable quality and mass production. A compact automatic transport system that is space-saving is possible based on a vertical machining center. We have numerous delivery records in Japan, the United States, Southeast Asia, and more. We provide reliable after-sales services such as regular inspections, repairs, modifications, and maintenance.

  • Machining Center

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Proposal for an automated line for end face processing of shaft and bar materials in turret M/C.

Proposal for an automated line for end face processing of shaft and bar materials in turret M/C.

The two turret heads on both sides of the aircraft process the end faces simultaneously!

This is a turret machining center equipped with two turret heads within a single processing machine. We will deliver it in a configuration that incorporates the options discussed with the customer. We recommend it to customers considering mass production, mass processing, and automated lines for workpieces that require machining on both end faces. Productivity is increased as both end faces of shafts, bars, and drawn materials can be processed simultaneously. Since each turret is equipped with its own NC control unit, simultaneous processing is possible even if the machining of the left and right end faces differs, allowing for independent control. It has a structure that is easy to automate and easy to integrate into processing lines. If you are considering the design and production of jigs or automation, we will propose options after consultation. We have a track record of deliveries in Japan, the United States, Southeast Asia, and many other locations. We provide reliable after-sales services such as regular inspections, repairs, modifications, and maintenance.

  • Machining Center

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Proposal for an automated line with double space productivity using twin spindles.

Proposal for an automated line with double space productivity using twin spindles.

Ideal for processing through holes in flanges! Automated line with twin spindles.

This is an automatic production system machining machine that combines a twin spindle M/C equipped with two main spindles and a gantry loader. It will be delivered in a form that incorporates the machining machine, gantry loader, and optional components. We recommend it to customers considering effective use of limited factory space and improvement of productivity. The base machine's twin spindle is equipped with two main spindles in one unit, making it ideal for mass production and processing of two workpieces simultaneously. It is expected to significantly improve the effective use of factory space and area productivity. Currently processing with two machines → consolidating into one twin spindle → integrating jigs, coolant systems, NC devices, and peripheral equipment into one set → enabling substantial cost reduction. We have numerous delivery records in Japan, the United States, Southeast Asia, and more. We provide reliable after-sales service, including regular inspections, repairs, and maintenance.

  • Machining Center

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Proposal for Ball Screw Stretch Compensation Function

Proposal for Ball Screw Stretch Compensation Function

Patent granted: Ball screw thermal displacement correction function for compensating ball screw elongation.

The ball screw elongation compensation function detects the rotation speed of the ball screw to predict the amount of elongation and incorporates this into the movement amount to prevent a decrease in positioning accuracy. In pursuit of higher precision and to improve the machining accuracy of our machining centers, we have obtained a patent through years of effort. Since it is sensorless, it can improve machining accuracy without additional costs, making it a beneficial feature for our customers. ■ Reduces elongation of ball screws without pre-tension by about one-third ■ No warm-up operation required ■ Sensorless with no failures ■ Fully automatic with initial settings completed It is planned to be standard equipment on our machining centers.

  • Machining Center

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Horizontal Machining Center "PCH-400" ★Exhibited at JIMTOF 2016

Horizontal Machining Center "PCH-400" ★Exhibited at JIMTOF 2016

From rough machining to finishing processes! Ideal for machining parts such as shafts, cases, steering, and powertrains!

The horizontal machining center "PCH-400" is our new product that offers finishing boring processing and reliable automation solutions. It can consistently handle processes from rough machining to finishing machining in cutting automation lines, making it ideal for machining parts such as shafts, cases, steering components, and powertrains. 【Product Features】 ■1: Flexible support for automation ■2: Minimizes warm-up time ■3: Design that suppresses chip accumulation 【Exhibiting at JIMTOF2016!】 ■Dates: November 17 (Thursday) to November 22 (Tuesday), 2016 ■Venue: Tokyo Big Sight ■Booth: East Hall 1, E1053 ■Highlights We will showcase the "PCH-400," which achieves finishing machining, along with sample work in the cutting automation line from rough machining to finishing machining, and propose the cutting automation line that our company aims to achieve in the future. *For details about the product and the exhibition, please contact us directly.

  • Machining Center

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.