coating(cfrp) - List of Manufacturers, Suppliers, Companies and Products

Release agent, excellent release properties, PFOS and PFOA free, non-VOC.

A dry release film is formed on the surface of the mold. Release properties are significantly improved, and cleaning of the molded products is unnecessary. It is non-flammable and safe, plus it can be easily applied. It does not contain silicone-based compounds.

The "FloroSurf FG-5093" is a fluorine-based dry mold release agent. It is free of silicone, preventing contamination of molded products, and eliminates the need for cleaning the molded items. No regulated substances such as PFOS or PFOA are used. Additionally, it is not classified as a VOC. By applying it, the adhesion of the surface molding resin is reduced, demonstrating excellent release properties even for complex and precise shapes. It is particularly effective in situations where conventional release agents fail to work properly. It boasts excellent durability, with proven continuous release performance over thousands of shots, and reapplication with a brush or spray can restore its effectiveness. 【Features】 - Strongly adheres to mold materials, enabling continuous release. - The film thickness is only a few nanometers, suitable for nano and sub-micron level molds. - Can be easily applied with brushes or spray guns, eliminating the need for outsourcing processing. - No need to remove the film during mold modification. - No transfer of release agent components, eliminating the need for cleaning molded products. - Low odor and non-flammable, maintaining a good working environment. *If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Coating Agent
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Water-based release agent "high performance and continuous release possible" "dry non-transfer" "VOC countermeasure product"

Please try this when regular release agents do not work well. Outstanding continuous release properties. Application is easy; it can be applied on the molding site and dries at room temperature in just 5 minutes. Contains no regulated substances!

"FluoroSurf FG-5095W" is a fluorine treatment agent (release agent) for water-based resin molding molds. (This product does not contain any PFAS regulated substances such as PFOA/PFOS/PFHxS.) * Fluorine release processing can be easily applied on-site using a brush or spray gun. * The release component reacts and bonds to the mold surface, providing durability and continuous release properties. * The release agent component is dry and does not transfer to the molded product, eliminating the need for cleaning. * When the release performance decreases, reapplication will restore its effectiveness. * Applying it to the nozzle of extrusion molds can also reduce blushing. * It is water-based and does not fall under VOC regulations. It is non-flammable and does not contain organic solvents, making it easy to manage without the regulations stipulated by fire and safety laws. * The film thickness is only a few nanometers, suitable for nano and sub-micron level molds and nano imprinting, accurately reproducing precise surfaces. * If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Coating Agent
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Water-soluble release agent, excellent release properties, continuous release with a single application, free of regulated substances.

FloroSurf FG-5095W is an environmentally friendly water-soluble release agent with excellent release properties. Please try it when conventional release agents do not work.

FluoroSurf FG-5095W is a water-soluble fluorine-based release agent. It is ideal for VOC countermeasures and does not use any regulated PFAS substances such as PFOA, PFOS, or PFHxS. When applied with a brush or spray to molds for resin molding elastomers and dried at room temperature for about 10 minutes, the release component reacts and adheres to the mold surface, demonstrating excellent release properties. ◎ The durability of the release effect is outstanding, allowing for continuous release. ◎ The film is at the nanometer level, enabling accurate reproduction even for complex and precise surface shapes. It can also be used for nanoimprinting. ◎ There is minimal contamination of the mold, significantly reducing cleaning efforts. ◎ There is no transfer to the molded products, eliminating the need for a cleaning process. ◎ There is no clouding of the workpiece during transparent resin molding.

Company：フロロテクノロジー
Price：10,000 yen-100,000 yen

Other polymer materials
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Water-soluble release agent, high performance and continuous release, transparent resin without cloudiness, dry.

Please try this when conventional release agents do not work well. Outstanding continuous release properties. Application is easy; it can be applied on the molding site and dries at room temperature in just 5 minutes. Contains no regulated substances!

The "Fluoro Surf FG-5095W" is a fluorine treatment agent (release agent) for water-based resin molding molds. (This product does not contain any PFAS regulated substances such as PFOA/PFOS/PFHxS.) * Fluorine release processing can be easily performed on the molding site using brushes or spray guns. * The release component reacts and bonds to the mold surface, providing durability and continuous release properties. * The release agent component is dry and does not transfer to the molded product, eliminating the need for cleaning. * The film thickness is only a few nanometers, making it suitable for nano and sub-micron level molds and nano imprinting, faithfully reproducing precise surfaces. * When the release performance decreases, reapplication will restore its effectiveness. * There is no cloudiness when molding transparent resins. * By applying it to the die of extrusion molding, it can also reduce defects like splay and sharkskin. * It is water-based and does not fall under VOC regulations. It is non-flammable and does not contain organic solvents, making it easy to manage without the need for controls specified by fire and safety laws. * If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Coating Agent
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Fluorine Coating Agent Example] Easy to apply and improves mold release properties.

Dry fluorine-based mold release agent. Overwhelming continuous release performance. Please try it when conventional release agents do not work well. No cleaning of molded products required. Samples available.

The "Fluoro Surf FG-5093" is a mold release agent made by dissolving a special fluororesin in a non-flammable fluorine-based solvent. Additionally, it does not contain any PFAS regulated substances. With just one application, the adhesion of the surface molding resin is reduced, demonstrating excellent continuous release properties even for complex and precise shapes. It is particularly effective in situations where conventional release agents fail to work. It boasts outstanding durability, with a proven track record of continuous release over thousands of shots, and reapplication with a brush or spray can restore its performance. 【Features】 ■ Strongly adheres to mold materials, enabling continuous release ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds ■ Can be easily applied with a brush or spray gun, eliminating the need for outsourcing processing ■ No need to remove the film during mold reworking ■ No transfer of release agent components, eliminating the need for cleaning molded products ■ Low odor and non-flammable, maintaining a good working environment *If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Other molds
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Continuous release-type dry release agent for fine molding "Nanoimprint"

High release properties, compatible with nano-level surface shapes and nano-imprinting "FloroSurf" - Easy application with brushes or sprays.

Introducing the high-performance fluorine-based mold release agent "FloroSurf," which surpasses baked-on fluoropolymer coatings and silicone release agents. When conventional release agents fail to release ⇒ We solve the problem with outstanding release performance. When you want to improve continuous release properties ⇒ Continuous release properties will be enhanced. "FloroSurf" features nano-level release components that bond tightly to the mold surface ⇒ It provides strong release and lubricating properties to the mold surface. It demonstrates exceptional continuous release properties in the molding of precision complex shapes, highly adhesive resins, elastomers, and fragile thin-walled products. ~ We are offering free samples exclusively for businesses! ~ Please select "Request Sample" via the [Contact Button] below.

Company：フロロテクノロジー
Price：Other

Other molds
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Water-based release agent, excellent release properties, continuous release possible with a single application, free of regulated substances.

The Fluoro Surf FG-5095W is an environmentally friendly water-based release agent with excellent release properties. Please try it when conventional release agents do not work.

FloroSurf FG-5095W is a water-based fluorine release agent. It is ideal for VOC countermeasures and does not use any regulated substances such as PFOA, PFOS, or PFHxS. When applied to elastomer molds for resin molding using a brush or spray and allowed to dry at room temperature for about 10 minutes, it reduces the adhesion of the molding resin on the surface, demonstrating excellent release properties. The release component reacts and adheres to the mold surface, providing sustained release effects and enabling continuous release. It is particularly effective in situations where conventional release agents struggle to perform. The coating is at the nanometer level, allowing for accurate reproduction even on complex and precise surface shapes, resulting in less mold contamination and significantly reducing cleaning efforts.

Company：フロロテクノロジー
Price：10,000 yen-100,000 yen

Other polymer materials
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Water-soluble release agent: high performance, continuous release possible, dry non-transfer, non-silicone.

Please try this when conventional release agents do not work well. It offers overwhelming continuous release properties. Application is easy; it can be applied on the molding site and dries at room temperature in just 5 minutes. Contains no regulated substances!

The "Fluoro Surf FG-5095W" is a fluorine treatment agent (release agent) for water-based resin molding molds. (This product does not contain any PFAS regulated substances such as PFOA/PFOS/PFHxS.) * Fluorine release processing can be easily applied on-site using brushes or spray guns. * The release component reacts and bonds to the surface of the mold, providing durability and continuous release properties. * The release agent component is dry and does not transfer to the molded product, eliminating the need for cleaning. * The film thickness is only a few nanometers, making it suitable for nano and sub-micron level molds and nano imprinting, accurately reproducing precise surfaces. * When the release performance decreases, reapplication will restore its effectiveness. * By applying it to the die of extrusion molding, it can also reduce defects like orange peel and shark skin. * It is water-based and does not fall under VOC regulations. It is non-flammable and does not contain organic solvents, making it easy to manage without the need for compliance with fire safety and occupational health regulations. * If you would like a free sample, please indicate "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Coating Agent
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Outstanding non-stick properties! Introducing "Plasma Coat."

Troubled by adhesion... No adhesion of adhesive tape, glue, etc.! With high release properties and durability, it solves challenges on the production line.

A must-see for those struggling with adhesion issues! "Plasma Coat (Ultra Non-Stick Treatment)" features high hardness and durability of thermal spray coatings made from metals, cermets, ceramics, etc., along with the extremely high non-stick properties of silicone resin, while also possessing high grip friction characteristics. Plasma Coat can be applied not only to metal components such as aluminum, stainless steel, and iron, but also to CFRP materials.

Company：大阪ガスケミカル株式会社　奈良表面加工センター
Price：Other

Processing Contract
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Continuous release dry release agent "Silicone-free" "No cleaning of molded products required"

A dry release film is formed on the surface of the mold. Release properties are improved, and cleaning of the molded product is unnecessary. It is non-flammable and safe, plus it can be easily applied. It does not contain silicone-based compounds.

The "FloroSurf FG-5093" is a fluorine-based dry mold release agent. It does not contain silicone, preventing contamination of molded products and eliminating the need for cleaning. By applying it, the adhesion of the surface molding resin is reduced, demonstrating excellent release properties even for complex and precise shapes. It is particularly effective in situations where conventional release agents fail to perform. It boasts outstanding durability, with a proven track record of continuous release over thousands of shots, and reapplication with a brush or spray can restore its performance. 【Features】 ■ Strongly adheres to mold materials, enabling continuous release ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds ■ Can be easily applied with brushes or spray guns, eliminating the need for outsourcing processing ■ No need to remove the film during mold modification ■ No transfer of release agent components, eliminating the need for cleaning of molded products ■ Low odor and non-flammable, maintaining a good working environment *If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Coating Agent
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Release agent Fluorosurf for precision surfaces, for fine molding, nanoimprint.

High release properties with nanometer-level surface shapes and compatibility with nanoimprinting "FloroSurf" - easy application with brushes or sprays.

Introducing the high-performance fluorine-based mold release agent "FloroSurf," which surpasses baked-on fluoropolymer processing and silicone release agents. When conventional release agents fail to provide release or you want to improve continuous release properties, this is where it shines. "FloroSurf" bonds tightly to the mold surface with a nanometer-level ultra-thin film, imparting strong non-stick and lubricating properties to the mold surface. It demonstrates exceptional continuous release properties in the molding of precision complex shapes, highly adhesive resins and elastomers, and fragile thin materials. ～ We are offering free samples exclusively for corporate clients! ～ Please indicate "Sample Request" when you contact us using the button below.

Company：フロロテクノロジー
Price：Other

Other molds
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Fluorine surface treatment of molds at our own site - Room temperature release agent - FluoroSurf

Fluorine-based dry release agent. Please try it when conventional release agents do not work well. Overwhelming continuous release properties. Easy to apply and dries at room temperature in 5 minutes. No need to clean the molded products.

The "Fluoro Surf FG-5093, 5095, 5097 Series" is a mold release agent made by dissolving a special fluororesin in a non-flammable fluorinated solvent. Just one application grants a non-stick property to the mold surface. It reduces the adhesion of molding resins to the mold, demonstrating excellent continuous release even for complex and precise shapes. Please try it in cases where conventional release agents do not work well. It boasts excellent durability and a proven track record of continuous release, and its performance can be restored by reapplying with a brush or spray. 【Features】 ■ Strongly adheres to mold materials, enabling continuous release ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds and nano imprinting ■ Easily applied with brushes or spray guns, with a drying time of 10 minutes at room temperature. No need for outsourcing processing ■ No need to remove the film during reapplication ■ No transfer of release agent components, eliminating the need for cleaning of molded products (FG-5093, 5095) ■ Low odor and non-flammable, maintaining a good working environment Applying it to the extrusion molding nozzle can also reduce haze. Free samples are available for trial (limited to corporations)! Feel free to request.

Company：フロロテクノロジー
Price：Other

Coating Agent
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Room temperature construction dry release agent Fluorine surface processing of molds at our own site

Please try this when conventional release agents do not work well. It offers overwhelming continuous release properties. Easy to apply, it dries at room temperature in 5 minutes on the molding site. No need to clean the molded products.

The "Fluoro Surf FG-5093, 5095, 5097 Series" is a mold release agent made by dissolving a special fluororesin in a non-flammable fluorinated solvent. Just one application provides a non-stick surface on the mold. It reduces the adhesion of molded resin to the mold, demonstrating excellent continuous release properties even for complex and precise shapes. Please try it in cases where conventional release agents do not work well. It has excellent durability and a proven track record of continuous release, and reapplication with a brush or spray can restore its performance. 【Features】 ■ Strongly adheres to the mold material, allowing for continuous release ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds and nanoimprinting ■ Easily applied with a brush or spray gun, drying at room temperature in 10 minutes. No need for outsourcing processing ■ No need to remove the film during reapplication ■ No transfer of release agent components, eliminating the need for cleaning of molded products (FG-5093, 5095) ■ Low odor and non-flammable, maintaining a good environment on-site By applying it to the extrusion molding nozzle, it can also reduce haze. Free samples are available for trial (limited to businesses)! Please feel free to request.

Company：フロロテクノロジー
Price：Other

Coating Agent
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Continuous release is possible. Fluorine surface processing of molds at our own site. Non-transfer.

Please try this when conventional release agents do not work well. It offers overwhelming continuous release properties. It is easy to apply, can be applied on the molding site, and only requires 5 minutes of air drying at room temperature. No cleaning of the molded products is necessary.

The "Fluoro Surf FG-5093, 5095, 5097 Series" is a mold release agent made by dissolving a special fluoropolymer in a non-flammable fluorinated solvent. Just one application provides a non-stick surface on the mold. It reduces the adhesion of molding resins to the mold, demonstrating excellent continuous release properties even for complex and precise shapes. Please try it in cases where conventional release agents do not work well. It has excellent durability and a proven track record of continuous release, and its performance can be restored by reapplying with a brush or spray. 【Features】 ■ Strongly adheres to the mold material, enabling continuous release ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds and nano-imprinting ■ Can be easily applied with brushes or spray guns, drying at room temperature in 10 minutes. No need for outsourcing processing ■ No need to remove the film during reapplication ■ No transfer of release agent components, eliminating the need for cleaning of molded products (FG-5093, 5095) ■ Low odor and non-flammable, maintaining a good working environment By applying it to the extrusion molding nozzle, it can also reduce haze. Free samples are available for trial (limited to corporations)! Please feel free to request.

Company：フロロテクノロジー
Price：Other

Coating Agent
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Release agent case: No transfer to the workpiece in dry conditions! Continuous release is now possible!

It is easy to perform release agent treatment that exceeds in-house baked fluororesin processing. Significant reduction in processing costs and lead times!

The "Fluoro Surf FG-509X Series" is a mold release agent made by dissolving a special fluororesin in a non-flammable fluorinated solvent. When applied to the mold with a brush or spray and dried at room temperature for about 10 minutes, it reduces the adhesion of the surface molding resin, demonstrating excellent release properties. It is particularly effective in situations where conventional release agents fail to work properly. The film is at the nanometer level, allowing for precise reproduction even on complex and intricate surface shapes. It has excellent durability, with a proven track record of continuous release over thousands of shots, and reapplication with a brush or spray can restore its performance. Since the release agent components do not adhere to the molded products, cleaning is unnecessary. Furthermore, regulated substances such as PFOS, PFOA, and PFHxS are not used. 【Features】 ■ Strongly adheres to mold materials, enabling continuous release ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds ■ Easily applied with brushes or spray guns, eliminating the need for outsourcing processing ■ No need to remove the film during mold reworking ■ No transfer of release agent components, making cleaning of molded products unnecessary ■ Low odor and non-flammable, maintaining a good working environment and easy management.

Company：フロロテクノロジー
Price：Other

Coating Agent
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Release agent for transparent resin: No cloudiness during the molding of transparent resin!

Release agent for transparent resin forms a dry release film on the mold surface. No cleaning of molded products is required. Non-flammable and safe + easy to apply. Contains no silicone compounds.

"FloroSurf" and "Mold Free" are fluorine-based dry release agents that do not cause cloudiness in transparent resins. They do not contain silicone, ensuring that molded products remain clean and do not require washing. Additionally, no PFAS regulated substances are used at all. These agents demonstrate their effectiveness in situations where traditional release agents struggle to perform. They are highly durable, with a proven track record of continuous release over thousands of shots, and their performance can be restored by reapplying with a brush or spray. There are two types available: solution type (product name FloroSurf) and aerosol type (product name Mold Free). 【Features】 ■ Strongly adheres to mold materials, enabling continuous release ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds ■ Can be easily applied with brushes or spray guns, eliminating the need for outsourcing processing ■ No need to remove the film during mold reworking; reapplication restores release performance ■ No transfer of release agent components, eliminating the need for cleaning molded products ■ Low odor and non-flammable, maintaining a good working environment (excluding aerosol type) *If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Coating Agent
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Spray release agent "Mold Free" high-performance release, free of regulated substances.

Please use this as an alternative to the discontinued fluorine-based release agents! It provides enhanced release properties. Free of regulated substances.

A high-performance fluorine-based release agent with proven results in various fields, "Fluorosurf," has been made into an aerosol. It can be easily applied on-site and exhibits excellent release properties after drying at room temperature. Additionally, it can be used as a substitute for release agents that have been discontinued by other companies. MF-5095 is a high-performance product that surpasses past aerosol release agents. Furthermore, this product does not contain regulated substances (PFOA, PFOS, PFHxS). *If you would like a sample for use, please include "Sample Request" in your inquiry. (This is limited to corporate clients. It cannot be used for applications involving food contact or medical purposes.)

Company：フロロテクノロジー
Price：Other

Coating Agent
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Release agent spray "Mold Free" high-performance release agent, free of regulated substances.

Please use this as a substitute for the discontinued fluorinated release agent! It provides enhanced release properties. Free of regulated substances.

The fluorine-based release agent "Fluorosurf," which has a proven track record in various fields, has been made into an aerosol. It can be easily applied on-site and exhibits excellent release properties after air-drying at room temperature. Additionally, it can be used as a substitute for release agents that have been discontinued from other manufacturers' fluorine-based products. MF-5095 is a high-performance product that surpasses previous aerosol release agents. Furthermore, this product does not contain regulated substances (PFOA, PFOS, PFHxS). *If you would like a sample for use, please include "Sample Request" in your inquiry. (This offer is limited to corporate clients. It cannot be used for applications involving food contact or medical use.)

Company：フロロテクノロジー
Price：Other

Coating Agent
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Release Agent Example] Cleaning of molded products is unnecessary, enabling continuous release.

FloroSurf FG-5093 forms a dry release film on the mold surface. Release properties are improved, and cleaning of the molded products is unnecessary.

"FloroSurf FG-5093" is a mold release agent that dissolves a special fluororesin in a non-flammable fluorinated solvent. By applying it, the adhesion of the surface molding resin is reduced, demonstrating excellent release properties even for complex and precise shapes. It is particularly effective in situations where conventional release agents do not work well. It has outstanding durability, with a proven track record of continuous release over thousands of shots, and reapplication with a brush or spray can restore its performance. Additionally, the release agent components do not adhere to the molded products, eliminating the need for cleaning. 【Features】 ■ Strongly adheres to mold materials, enabling continuous release ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds ■ Can be easily applied with brushes or spray guns, eliminating the need for outsourcing processing ■ No need to remove the film during mold modifications ■ No transfer of release agent components, eliminating the need for cleaning of molded products ■ Low odor and non-flammable, maintaining a good working environment *If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Coating Agent
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

On-site construction fluorine-based release agent - No need to clean the work! FluoroSurf

Please try this when regular release agents do not work well. Outstanding continuous release properties. Easy to apply with a brush or spray. Dries at room temperature in 5 minutes after application.

The "Fluoro Surf FG-5093/5095 Series" is a mold release agent made by dissolving a special fluororesin in a non-flammable fluorinated solvent. Just one application provides a non-stick surface on the mold. It reduces the adhesion of molded resin to the mold, demonstrating excellent continuous release properties even for complex and precise shapes. Please try it in cases where conventional release agents do not work well. It has excellent durability and a proven track record of continuous release, and its performance can be restored by reapplying with a brush or spray. 【Features】 ■ Strongly adheres to the mold material, enabling continuous release ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds ■ Can be easily applied with a brush or spray gun, and dries at room temperature in 10 minutes. No need for external processing ■ No need to remove the film during reapplication ■ No transfer of release agent components, eliminating the need for cleaning of molded products ■ Low odor and non-flammable, maintaining a good working environment Applying it to the extrusion molding nozzle can also reduce streaking. *If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Coating Agent
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Water-soluble release agents [for rubber molding] continuous release and quality improvement

Solving the challenges of rubber molding sites! Improving productivity with overwhelming release properties.

In the rubber molding industry, there is a demand for both product quality and productivity. Particularly in complex shapes and precision products, molding defects can occur due to release agent issues, potentially leading to reduced yield. Additionally, transfer of the release agent and adhesion to molds not only compromises product quality but also increases cleaning processes. Our water-soluble release agent addresses these challenges and supports the balance between productivity and quality. 【Usage Scenarios】 - Release of rubber molded products - Application to molds - Extrusion molding 【Benefits of Implementation】 - Improved continuous release properties - Reduction of molding defects - Decrease in cleaning processes - VOC-free, reducing environmental impact

Company：フロロテクノロジー
Price：Other

Coating Agent
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Water-soluble release agent for automotive resin parts

Reduce molding defects of resin and rubber parts! Improve productivity with continuous release.

In the automotive industry, mass production of high-quality parts is required. Particularly for parts with complex shapes and designs, defects in mold release during the forming process are a significant factor that reduces production efficiency. Mold release defects can lead to damage to parts and aesthetic issues, potentially resulting in increased costs. Our water-soluble release agent addresses these challenges with its overwhelming continuous release capability. 【Application Scenarios】 - Forming of interior parts such as dashboards, door trims, and console boxes - Forming of parts with complex shapes or high design aesthetics - Compatibility with various resin materials such as urethane, ABS resin, and PP resin 【Benefits of Implementation】 - Improved yield due to reduced mold release defects - Reduced frequency of mold maintenance - Cost savings through increased productivity - Stable supply of high-quality interior parts

Company：フロロテクノロジー
Price：Other

Coating Agent
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Release agent for transparent resin: "No cloudiness on the product!" "Continuous release is possible."

A dry release film is formed on the surface of the mold. Continuous release is possible, and there is no cloudiness on the resin. Since it is dry, the release agent components do not transfer, so cleaning of the workpiece is unnecessary.

The "Fluoro Surf FG-5093" is a fluorine-based dry mold release agent. It is free of silicone, ensuring that molded products remain clean and do not require washing. It is the only release agent that does not cause cloudiness when molding transparent resins. With a thin film at the nanometer level, it demonstrates excellent release properties even for complex and precise shapes, maintaining accurate surface precision. It has high release properties and excellent durability, with a proven track record of continuous release over thousands of shots. It is particularly effective in situations where conventional release agents fail. 【Features】 ■ The release agent components react with the mold material to adhere strongly, allowing for continuous release. ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds. ■ It can be easily applied with brushes or spray guns, eliminating the need for outsourcing processing. ■ No removal of the film is required during mold reworking. ■ There is no transfer of release agent components, and cleaning of molded products is unnecessary. ■ When performance degrades, reapplication is as simple as top-coating! No need to remove the old film. ■ It has low odor and is non-flammable, helping to maintain a good working environment. ■ It does not use PFAS regulated substances (such as PFOS, PFOA, PFHxS, etc.).

Company：フロロテクノロジー
Price：Other

Coating Agent
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Please try the following for moldability: "Continuous molding possible" "Dry non-transfer"

Overwhelming continuous release properties. Easy to apply with a brush or spray. Dries at room temperature in just 5 minutes after application. The film thickness is only a few nanometers, and cleaning of the molded product is unnecessary. Sample available.

"FluoroSurf" and "Mold-Free" provide excellent non-stick release properties to metal surfaces when applied. PFAS regulated substances (such as PFOS, PFOA) are not used. Please try it when conventional release agents do not work. 【Features】 ■ The fluoropolymer film reacts with the mold material to adhere strongly, enabling continuous release even when conventional release agents fail. ■ With a film thickness of just a few nanometers, it can faithfully reproduce surface shapes at the nano and sub-micron level. ■ FluoroSurf can be easily applied with brushes or spray guns, while Mold-Free can be applied with an aerosol. Application is completed in just 10 minutes at room temperature, eliminating the need for external processing like baked fluoropolymer. ■ There is no accumulation of dirt on the mold, and no transfer of components to the workpiece, eliminating the need for cleaning processes. (Excluding Mold-Free MF-02S) ■ It is also effective in improving resin flow. ■ It is non-flammable, thus not classified as hazardous under fire laws. (Excluding Mold-Free) It has low odor. A water-based model is also available for VOC countermeasures. ■ There is no need to remove the film during mold reworking. ■ It is effective in reducing surface defects in extrusion molding and addressing melt fracture issues.

Company：フロロテクノロジー
Price：Other

Other molds
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Water-soluble release agent for automotive resin parts - transparent resin without cloudiness.

Reduce molding defects of resin and rubber parts! Improve productivity with continuous release.

In the automotive industry, mass production of high-quality parts is required. Particularly for parts with complex shapes and designs, issues with mold release can significantly reduce production efficiency. Mold release problems can lead to damage to parts and defects in appearance, potentially resulting in increased costs. Our water-soluble release agent addresses these challenges with its overwhelming continuous release properties. 【Application Scenarios】 - Molding of interior parts such as dashboards, door trims, and console boxes - Molding of parts with complex shapes or high design quality - Compatibility with various resin materials such as urethane, ABS resin, and PP resin 【Benefits of Implementation】 - Improved yield through reduced mold release issues - Decreased frequency of mold maintenance - Cost reduction through increased productivity - Stable supply of high-quality interior parts

Company：フロロテクノロジー
Price：Other

Coating Agent
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Water-soluble release agent for transparent resin - transparent resin without cloudiness - non-transferable upon drying.

Reduce molding defects of resin, rubber, and transparent parts! Improve productivity with continuous release.

Our water-soluble release agent solves issues such as poor release performance through its overwhelming continuous release capability. Additionally, it contributes to improved productivity by minimizing cloudiness of the workpiece during the molding of transparent resins such as polycarbonate. Furthermore, the thickness of the release agent film is at the nanometer level, allowing for faithful reproduction of the mold's surface precision. Being water-based, it does not generate VOCs and poses no fire hazards, making it easy to manage and environmentally friendly. Moreover, although it is a fluorine-based release agent, it does not contain regulated substances such as PFOA, PFOS, or PFHxS. 【Application Scenarios】 - Molding of transparent components such as lens parts - Molding of interior parts like dashboards, door trims, and console boxes - Molding of complex-shaped parts or parts with high design aesthetics - Compatibility with various resin materials such as urethane, ABS, and PP 【Benefits of Implementation】 - Improved yield due to reduced release failures and workpiece cloudiness - Reduced frequency of mold maintenance - Cost reduction through increased productivity - Stable supply of high-quality interior parts

Company：フロロテクノロジー
Price：Other

Coating Agent
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Fluorine-based release agent that can be applied on-site: Fluorosurf FG-5093.

Please try this when regular release agents do not work well. It offers overwhelming continuous release properties. Easy to apply with a brush or spray. Dries at room temperature in 5 minutes after application.

The "Fluoro Surf FG-5093" is a mold release agent made by dissolving a special fluororesin in a non-flammable fluorinated solvent. After application, a non-stick property is imparted to the mold surface within 5 minutes of air drying at room temperature. The adhesion of the molded resin to the mold is reduced, demonstrating excellent continuous release even for complex and precise shapes. Please try it in cases where conventional release agents do not work well. It boasts excellent durability, with a proven track record of continuous release over thousands of shots, and reapplication using a brush or spray can restore its performance. 【Features】 ■ Strongly adheres to the mold material, enabling continuous release ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds ■ Easily applied with a brush or spray gun, with a 10-minute air drying time at room temperature. No need for outsourcing processing ■ No need to remove the film during reapplication ■ No transfer of release agent components, eliminating the need for cleaning of molded products ■ Low odor and non-flammable, maintaining a good working environment Applying it to the extrusion molding nozzle can also reduce flash. *If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Coating Agent
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Release agent Continuous release is possible Fluorine surface processing of molds in our own manufacturing facility

Please try this when conventional release agents do not work well. It offers overwhelming continuous release properties. Easy to apply, dries at room temperature in 5 minutes on the molding site. No need to clean the molded products.

The "FloroSurf FG-5093, 5095, 5097 Series" is a mold release agent made by dissolving a special fluororesin in a non-flammable fluorinated solvent. It does not contain PFAS regulated substances (such as PFOS and PFOA). Just one application provides a non-stick surface to the mold. It demonstrates excellent continuous release properties even for complex and precise shapes. Please try it in cases where conventional release agents do not work well. It has excellent durability and a proven track record of continuous release, and reapplication using a brush or spray can restore its performance. 【Features】 ■ Strongly adheres to the mold material, enabling continuous release. ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds and nanoimprinting. ■ Easily applied with a brush or spray gun, drying at room temperature in 10 minutes. No need for external processing. ■ No need to remove the film during reapplication. ■ No transfer of release agent components, eliminating the need for cleaning of molded products (FG-5093, 5095). ■ Low odor and non-flammable, maintaining a good environment on-site (excluding aerosol types). ■ Applying it to the nozzle of extrusion molds reduces defects like blushing and melt fracture. Free samples are available for trial (limited to corporate clients)!

Company：フロロテクノロジー
Price：Other

Coating Agent
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Water-soluble release agent for electronic components

Ideal for precision molding! Continuous release, non-silicone, air-dry in 5 minutes at room temperature.

In the electronic components industry, precision molding requires the faithful reproduction of intricate mold shapes to efficiently produce high-quality products. Particularly in the molding of complex shapes and fine parts, the quality of release properties significantly affects production efficiency and product quality. Traditional release agents have led to issues such as poor release, transfer problems, and increased cleaning efforts, which can decrease productivity. Our water-soluble release agent addresses these challenges and contributes to improved productivity. 【Application Scenarios】 - Precision molding molds - Nanoimprinting - Extrusion molding (mouthpieces) 【Benefits of Implementation】 - Improved continuous release properties - Enhanced quality of molded products - Reduction in cleaning processes - Improved working environment

Company：フロロテクノロジー
Price：Other

Coating Agent
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Release Agent Example] Fluorine treatment on mold surface in-house (easy application + room temperature drying)

It is easy to perform release agent treatment that surpasses in-house baked fluororesin processing. Significant reduction in processing costs and delivery times!

"FloroSurf FG-5093" is a mold release agent made by dissolving a special fluororesin in a non-flammable fluorinated solvent. By applying it to the mold with a brush or spray and allowing it to dry at room temperature for about 10 minutes, the adhesion of the molding resin to the surface is reduced, demonstrating excellent release properties. It is particularly effective in situations where conventional release agents do not work well. The film is at the nanometer level, allowing for accurate reproduction even on complex and precise surface shapes. It has excellent durability, with a proven track record of continuous release for thousands of shots, and reapplication with a brush or spray can restore its performance. Since the release agent components do not adhere to the molded products, cleaning is unnecessary. 【Features】 ■ Strongly adheres in reaction to mold materials, enabling continuous release ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds ■ Can be easily applied with a brush or spray gun, eliminating the need for outsourcing processing ■ No need to remove the film during mold reworking ■ No transfer of release agent components, eliminating the need for cleaning of molded products ■ Low odor and non-flammable, maintaining a good working environment and easy management *If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Coating Agent
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

coating(cfrp) - List of Manufacturers, Suppliers, Companies and Products | IPROS GMS

coating Product List

Release agent, excellent release properties, PFOS and PFOA free, non-VOC.

Water-based release agent "high performance and continuous release possible" "dry non-transfer" "VOC countermeasure product"

Water-soluble release agent, excellent release properties, continuous release with a single application, free of regulated substances.

Water-soluble release agent, high performance and continuous release, transparent resin without cloudiness, dry.

[Fluorine Coating Agent Example] Easy to apply and improves mold release properties.

Continuous release-type dry release agent for fine molding "Nanoimprint"

Water-based release agent, excellent release properties, continuous release possible with a single application, free of regulated substances.

Water-soluble release agent: high performance, continuous release possible, dry non-transfer, non-silicone.

Outstanding non-stick properties! Introducing "Plasma Coat."

Continuous release dry release agent "Silicone-free" "No cleaning of molded products required"

Release agent Fluorosurf for precision surfaces, for fine molding, nanoimprint.

Fluorine surface treatment of molds at our own site - Room temperature release agent - FluoroSurf

Room temperature construction dry release agent Fluorine surface processing of molds at our own site

Continuous release is possible. Fluorine surface processing of molds at our own site. Non-transfer.

Release agent case: No transfer to the workpiece in dry conditions! Continuous release is now possible!

Release agent for transparent resin: No cloudiness during the molding of transparent resin!

Spray release agent "Mold Free" high-performance release, free of regulated substances.

Release agent spray "Mold Free" high-performance release agent, free of regulated substances.

[Release Agent Example] Cleaning of molded products is unnecessary, enabling continuous release.

On-site construction fluorine-based release agent - No need to clean the work! FluoroSurf

Water-soluble release agents [for rubber molding] continuous release and quality improvement

Water-soluble release agent for automotive resin parts

Release agent for transparent resin: "No cloudiness on the product!" "Continuous release is possible."

Please try the following for moldability: "Continuous molding possible" "Dry non-transfer"

Water-soluble release agent for automotive resin parts - transparent resin without cloudiness.

Water-soluble release agent for transparent resin - transparent resin without cloudiness - non-transferable upon drying.

Fluorine-based release agent that can be applied on-site: Fluorosurf FG-5093.

Release agent Continuous release is possible Fluorine surface processing of molds in our own manufacturing facility

Water-soluble release agent for electronic components

[Release Agent Example] Fluorine treatment on mold surface in-house (easy application + room temperature drying)

Search Keywords Related to coating