container Product List and Ranking from 178 Manufacturers, Suppliers and Companies

1111 size flat 2-part size 'SN Container B#94'

Efficient transportation possible with a 2-part size of a 1111 size pallet! Large SN container with two-color molding.

The external dimensions are 1095×540mm, allowing for two units to be perfectly stacked on a 1100×1100 size pallet. This enables efficient transportation without wasting space. The rail structure installed at the long side opening allows for sliding stacking, improving the workability during stacking. Additionally, in multi-layer storage, the fit is difficult to disengage (hard to fit in), making it less likely to collapse. A hanging card holder can be installed on one short side. The card holder has a structure that holds the bottom with a claw shape. Therefore, there is no concern about it getting caught and flipping up on the lower container during nesting, enhancing workability. There are a total of five φ6mm drainage holes installed at the center of the bottom and at the four corners. 【Specifications (excerpt)】 ■ External dimensions: 1095×540×201mm ■ Internal dimensions: 1045×484×194mm ■ Effective internal dimensions: 1019×458×184mm ■ Capacity: 94.1L ■ Color: A Gray/Pink *For more details, please refer to the related links or feel free to contact us.

Company：三甲物流ソリューションサービス
Price：Other

container
container

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Color variation allows for color-coded management! Santer Series

A kitchen mesh container suitable for temporary storage after washing and cutting vegetables! It comes in a variety of standard colors, allowing for management of contents by color!

The mesh container with a handle, "Santainer," allows for stacking while keeping the contents stored by folding the handle inward. If the handle is folded outward for nesting, it can be stored compactly. Made of hygienic plastic, it is suitable for washing and storing food. ● Product Lineup "Santainer A#50N" - Standard lineup of 6 colors 【Specifications】 External dimensions: 578×390×283mm Effective internal dimensions: 479×295×249mm Standard colors: Light Blue, Yellow, Red, Green, Pink, Cream "Santainer A#85-2" - Standard lineup of 6 colors 【Specifications】 External dimensions: 720×475×338mm Effective internal dimensions: 614×375×292mm Standard colors: Light Blue, Yellow, Red, Green, Pink, Cream "Santainer A#120-2" - Standard lineup of 3 colors 【Specifications】 External dimensions: 808×553×370mm Effective internal dimensions: 692×447×302mm Standard colors: Light Blue, Yellow, Orange *For color variations, please refer to the separate PDF brochure.

Company：三甲物流ソリューションサービス
Price：Other

container
container

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

SN Container C#10YA, which allows easy confirmation of contents from the side.

The contents can be easily checked through the side hole.

The SN Container C#10YA is a stacking type SN container in the same color, suitable for transporting food such as bento and side dishes. <Features> - It is a shallow type of 63mm from the "SN Container C#18." It allows for mutual fitting. - All sides have holes, enabling visibility of the contents even when two rows of stacked containers are loaded. - The bag-like handles on the long and short sides allow for stable handling. - There is a textured surface for label peeling on both short sides, the entire top surface of the flange, and part of the inner surface. Please feel free to consult us when you need assistance. 【Specifications (partial)】 ■Model number: 101004 ■External dimensions: 528×314×89mm ■Internal dimensions: 478×276×80mm ■Effective internal dimensions: 457×260×70mm ■Compression load: 13.23kN (1350kgf) *For more details, please refer to the PDF document or feel free to contact us.

Company：三甲物流ソリューションサービス
Price：Other

container
container

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Lightweight design of 'SN Container C#29FC-2' for reducing environmental impact.

The "SN Container C#29FC" has been lightened by 9%. It is a same-color stacking type SN container aimed at reducing environmental impact.

<Features> - Approximately 9% weight reduction from SN Container C#29FC This will reduce CO2 emissions by about 1 ton per year with the same operations as before. (Note: This figure is based on our calculation method and does not guarantee results.) Please feel free to contact us when you need assistance. 【Specifications (Partial)】 ■Model Number: 102958 ■External Dimensions: 559×452×151mm ■Internal Dimensions: 513×406×143mm ■Effective Internal Dimensions: 498×391×134mm ■Compression Load: 12.75kN (1300kgf) *For more details, please refer to the PDF document or feel free to contact us.

Company：三甲物流ソリューションサービス
Price：Other

container
container

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

The lock won't pop out! 'Sandbox #36-3, 3B Lid-2'

When locked, the lock does not protrude beyond the external dimensions of the lid, allowing for safe handling.

Until now, there has been no lid with a Sunlock for the Sanbox #36-3 series. We have newly added a lid equipped with the Sunlock Type 13 to our lineup. The Sunlock Type 13 is rotary, offering good operability, and it will not come off due to wind or vibrations. Since the lock does not protrude from the outer dimensions of the lid when locked, it is less likely to be damaged by collisions with adjacent containers. Additionally, there is no risk of the lock getting caught, which improves work efficiency during tasks such as pallet stacking. <Other Features> - A notch for banding is provided in the center of the short side (this notch is flush with the top surface of the lid). - Stacking of the lid alone is possible. *It is also available for sale without a lock. (Part number: 701856-00) Please feel free to consult us when you need assistance. 【Specifications】 ■Part number: 701856-01 ■Outer dimensions: 559×375×29mm ■Lock: Sunlock Type 13 L/R *For more details, please refer to the PDF document or feel free to contact us.

Company：三甲物流ソリューションサービス
Price：Other

container
container

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Perfect for storing 96mm natto packs! 'Santenna B#29T'

The 96mm natto pack is stored in 7×4 rows and 2 tiers! The cutout on the side and the full mesh provide excellent ventilation.

The "Santenna B#29T" is a stacking type container for natto fermentation and aging. <Features> - It can store 7×4 rows of 96mm natto packs in two tiers. - Ventilation is ensured with side cutouts and a full mesh design. - The mesh on the sides is positioned to avoid the flange position of the packs, preventing packs from protruding and direct airflow from entering through gaps. - A wave-shaped handle that is easy to grip is installed at the central flange on the short side. Please feel free to consult us when you need assistance. 【Specifications (partial)】 ■Model number: 102957 ■External dimensions: 707×464×117mm ■Internal dimensions: 672×423×103mm ■Effective internal dimensions: 670×417×95mm ■Compression load: 26.0kN (2650kgf) *For more details, please refer to the PDF document or feel free to contact us.

Company：三甲物流ソリューションサービス
Price：Other

container
container

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Oricon P63B with short edge re-fitting mechanism

Even when stacked, it is possible to readjust the short sides from the outside!! This can prevent accidental cargo collapse.

The "Oricon P63B" is a folding container equipped with a short-side re-fitting mechanism. It features a fold-back section for finger placement at both ends of the lower short side, allowing for easy re-fitting from the outside if the engagement of the short side panels becomes misaligned or detached. Even if the engagement of the lower Oricon in a stacked state comes undone, it can be re-fitted from the outside, eliminating the need to disassemble the stack and helping to prevent load collapse. <Other Features> - The external dimensions of the Oricon are 600×400mm, allowing for the stacking of 4 units on an 812-sized pallet and 5 units on a 1012-sized pallet (100% stacking efficiency). - It has easy-to-handle grip holes that enhance handling. - The printed surface on the side and the label-removable textured surface on the upper short side are designed to prevent adhesive residue from labels, ensuring cleanliness. 【Specifications (partial)】 ■ External dimensions: 600×400×319(74)mm ■ Internal dimensions: 569×368×309mm ■ Effective internal dimensions: 568×367×301mm ■ Capacity: 64.3L ■ Material: PP ■ Color: Blue *For more details, please refer to the PDF document or feel free to contact us.

Company：三甲物流ソリューションサービス
Price：Other

container
container

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

SN container of jade ball size 'SN Container C#37ZT'

Size capable of loading 13 flat items onto a light truck bed.

The "SN Container C#37ZT" is a type of SN container that is perfectly suited for loading onto the bed of a light truck, with the same color and shape. Its external dimensions are the same size as the Sun Container B#50 series, allowing for similar use in light trucks. (Note: Calculated based on light truck bed size: 1945×1410mm.) It is compatible with the Sun Container B#50 series, which is widely used by many fresh produce producers. <Other Features> - With the SN design, it is more compact compared to the Sun Container B#50 series, allowing for efficient storage. - Additionally, when loading empty boxes onto a truck, nesting can reduce the height (approximately 27% reduction), enabling safe transportation. - It features a fold-over handle design, preventing contact between hands and contents, thus preventing damage to the contents. - Large chamfers and R shapes are installed on the inner surface of the container, making it difficult for fruits and vegetables to get marks or scratches, thereby minimizing quality degradation during storage and transportation. - It can be stacked in a sliding manner along the short and long sides, making stacking operations easy. *For more details, please refer to the PDF document or feel free to contact us.

Company：三甲物流ソリューションサービス
Price：Other

container
container

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Lightweight Large Sleeve Container "DECABO" made of Prapal.

Stackable OK! Lightweight large sleeve container made entirely of plastic! It can be folded when not in use, which helps cut unnecessary transportation costs.

"DECABO" is a returnable pallet container made entirely of plastic. With dimensions suitable for container and truck transport, it significantly improves loading and transportation efficiency. It can also be folded when not in use, reducing unnecessary transportation costs. 【Features】 ■ Reduction of loading and waiting times ■ High-efficiency loading and storage possible through stacking ■ Foldable design that considers space-saving for storage ■ Load capacity made possible by lightweight, high-rigidity plastic ■ Lightweight large container (sleeve box, box pallet) that ensures safety, security, and ease of use ■ Reduction of one-way materials possible (stretch film, PP bands, etc.) *For more details, please refer to the catalog or feel free to contact us.

Company：Kawakami Sangyo Co., Ltd. TOKYO/NAGOYA/OSAKA/FUKUOKA, 10 other locations
Price：Other

container
palette
Other packaging materials
container

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Lightweight Plastic Large Pallet Sleeve Container "Dekabo"

Stackable OK! Lightweight large sleeve container that is easy to assemble. Made with bubble wrap pearl-shaped resin boards, featuring a locking mechanism with three parts.

"DECABO" is a returnable pallet container made entirely of plastic. It has dimensions that are most suitable for container and truck transport, significantly improving loading and transportation efficiency. It can also be folded when not in use, reducing unnecessary transportation costs. 【Features】 ■ By converting from bulk loading to palletization, it is possible to reduce loading and waiting times. ■ The sleeve box can be folded, allowing for high-efficiency loading. ■ The folding design considers space-saving for storage. ■ The load-bearing capacity made possible by lightweight, high-rigidity plastic. ■ A lightweight large container sleeve box (box pallet) that ensures safety, security, and ease of use. ■ It is possible to reduce one-way materials (stretch film, PP bands, etc.). For more details, please refer to the catalog or feel free to contact us.

Company：Kawakami Sangyo Co., Ltd. TOKYO/NAGOYA/OSAKA/FUKUOKA, 10 other locations
Price：Other

container
container

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[With construction examples] Modular architecture *Components produced in the factory are assembled on-site.

Wide range of applications! We offer functional spaces and highly designed houses at low cost to meet your needs! You can also choose the size of the building and the materials and colors of the walls!

Our "modular construction" involves the factory production of standardized components, which are then assembled on-site. By managing production in the factory, we can achieve quality control, shorter construction periods, and cost reduction. We have obtained certification for the international standard ISO 9001 for our quality management system. Additionally, we are certified by the Minister of Land, Infrastructure, Transport and Tourism (with steel performance evaluation grades J and R). Customers can choose the building size, wall materials, and colors, allowing us to propose and realize functional spaces and aesthetically pleasing houses at a low cost, tailored to their needs. **Features** - A wide variety of both interior and exterior options - Maintaining quality through factory production of standardized components - Shortening construction time by assembling pre-manufactured components on-site - Suitable for various applications, including offices, warehouses, and factories *For more details, please refer to the PDF document or feel free to contact us.*

Company：ナガワ
Price：Other

others
container

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Container Tough Tena KCC type

The reliability is different with dual safety design.

Differentiated logistics services enhance sales competitiveness. In the era of small-lot production and frequent small-volume transportation, Taftena's logistics services further promote product sales. The combination of polyethylene tanks and steel outer frames ensures greater safety and economy in liquid transportation. The outer frame is made using a prefabricated method with zinc-dipped galvanization. Since the outer frame is surface-treated with zinc-dipped galvanization, it remains rust-free and maintains cleanliness for quality control. It is assembled with blocks of pallets, supports, side panels, and upper frames, and maintenance can be performed on-site by replacing the necessary blocks. With advanced rotational molding technology, it is highly durable. Produced using the "Engel method," which was introduced from the Dutch company VassenSchomaker, along with independently developed foam triple technology, it has significantly improved rigidity, impact resistance, and thermal insulation.

Company：共立物流システム
Price：Other

container
container

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Liquid container Drum can

No need for wastewater treatment from cleaning operations.

It can be used as a multi-type transport container. Drum with a 15° tapered bottom discharge type. Single bag using super metallocene. No troublesome cleaning or waste liquid treatment is required. The volumes are 335 liters and 350 liters.

Company：共立物流システム
Price：Other

container
container

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Flexible container K-bee bag

K-bee bags are designed with ease of handling, toughness, and considerations for filling, transport, storage, and discharge.

The container base fabric is produced in our own factory according to usage conditions and contents. It is safe in terms of the quality of the contents. It has a long service life and is economical. The toughness is further enhanced by reinforced sewing with high-strength tarpaulin and high-frequency welders. Since it is made of synthetic resin tarpaulin, even in the unlikely event of a tear, applying the same fabric ensures strength and reliability. Repair work can be done easily.

Company：共立物流システム
Price：Other

container
container

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Counter-Terrorism Product] Explosive Storage Container 'GOLAN 0.03-6'

For transporting hazardous waste with explosion risks! An explosive storage container that can withstand explosions equivalent to 30 grams of TNT.

The "GOLAN 0.03-6" is a convenient and cost-effective explosive storage container designed for storing and transporting explosives and flares indoors. It has a diameter of 175mm (6.9 inches) and a total length of 390mm (15.3 inches). The body is made of full stainless steel. It can withstand explosions equivalent to 30 grams of TNT at any point inside and suppresses shock waves. 【Specifications】 ■ Diameter: 175mm (6.9 inches) ■ Total Length: 390mm (15.3 inches) ■ Weight: 16kg (35 pounds) ■ Internal Storage ・ Diameter: 120mm (4.7 inches) ・ Total Length: 215mm (8.5 inches) ■ Bottom Hole: 3mm ※ For pressure relief and electrical cable outlet ■ Exterior: Full stainless steel body *For more details, please refer to the PDF document or feel free to contact us.

Company：シー・ティ・マシン大阪本社
Price：Other

Other safety and hygiene products
container
container

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Counter-Terrorism Product] Explosive Storage Container 'GOLAN 0.15'

Withstand explosions equivalent to 150 grams of TNT! Moving and loading/unloading can be done by two people.

"GOLAN 0.15" is a convenient and cost-effective explosive storage container designed for storing or transporting explosives and flares indoors, as well as temporarily storing small objects that may pose an explosive risk. It can withstand explosions equivalent to 150 grams (0.33 pounds) of TNT at any point inside and can suppress blast waves. Movement and loading/unloading can be done by two people. 【Features】 ■ Convenient and cost-effective ■ Withstands explosions equivalent to 150 grams of TNT and suppresses blast waves ■ Movement and loading/unloading can be done by two people ■ Can be mounted on trucks and trailers (optional) ■ Custom designs, including changes in paint color and other requests (optional) *For more details, please refer to the PDF document or feel free to contact us.

Company：シー・ティ・マシン大阪本社
Price：Other

Other safety and hygiene products
container
container

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Terrorism Countermeasure Product] Explosive Storage Container 'GOLAN 0.5'

Convenient and cost-effective! It can be used as a container for storing suspicious mail and objects.

"GOLAN 0.5" is a convenient and cost-effective explosive storage container designed for storing and transporting explosives and small-caliber ammunition indoors. It can contain unexpected explosions of up to 0.5 kilograms (1.1 pounds) of TNT equivalent. It can be used as a container for storing suspicious mail or objects (even large ones) at various checkpoints. 【Features】 ■ Convenient and cost-effective ■ Usable as a container for storing suspicious mail or objects ■ Can contain up to 0.5 kilograms (1.1 pounds) of TNT equivalent ■ Truck and trailer mounting available (optional) ■ Custom designs, including color changes and other requests (optional) *For more details, please refer to the PDF document or feel free to contact us.

Company：シー・ティ・マシン大阪本社
Price：Other

Other safety and hygiene products
container
container

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Counter-Terrorism Product] Explosive Storage Container 'GOLAN 3'

The device does not affect the external environment with blast waves! Custom designs and various additional accessories can be equipped upon request.

The "GOLAN 3" is an explosive storage container designed for the safe transportation and storage of large packages suspected to contain explosives. In the event of an unexpected explosion, it can contain up to 3 kilograms (6.6 pounds) of TNT equivalent without affecting the external environment. Standard features include a spare wheel, parking brake, and towing connection hardware. 【Features】 ■ Can contain up to 3 kilograms (6.6 pounds) of TNT equivalent ■ Does not affect the external environment in the event of an explosion ■ Optional specifications - Command button for explosive disposal robots - Custom designs and various additional accessories can be equipped upon request - Exterior color can be changed to your preference *For more details, please refer to the PDF document or feel free to contact us.

Company：シー・ティ・マシン大阪本社
Price：Other

Other safety and hygiene products
container
container

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Option] Installation, moving rack/container

Leveraging the features of the 3D-shaped Steritainer Plus, we also offer liquid delivery racks that reduce work load, as well as exterior containers that are convenient for moving and storage.

The "Steritainer Plus dedicated upside-down rack" is a space-saving rack compatible with 10L-20L that makes it easy to discharge solutions. With the Steritainer Plus, which has a mouth shape that prevents residual liquid, complete discharge of the contents is possible. The "Storage Outer Container RIC" is a plastic outer container that allows for stacking storage of Steritainer Plus filled with liquid. It can be moved on a cart or stored in a refrigerator while in the container. *Trial lending is also available. Please feel free to contact us for more details.

Company：積水成型工業ブロー事業部
Price：Other

container
rack
Plastic utensils and containers
container

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Container "Industrial Waste Container Standard Type (U Type)"

Sturdy and neat! A bolt-assembled waste box container that can be used for a long time!

The "Standard Type Industrial Waste Container" is a general-purpose box. It is a steel industrial waste container that is strong against impact and offered at a reasonable price, contributing to an improved image with its design and helping to reduce labor costs during handling. Additionally, since each panel is fastened with bolts and nuts, it can be disassembled, assembled, or changed in type by one person. 【Features】 ■ Impact-resistant steel container ■ Replacement of just one side is possible in case of damage ■ Long-lasting structure that is resistant to rust ■ Suitable for both forklifts and lifting lanes ■ Can be stacked in multiple layers, also serving as a storage container ■ Easy to change models even after introduction *For more details, please refer to the PDF materials or feel free to contact us.

Company：アーク・ロット
Price：Other

container
container

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Container "Industrial Waste Container, Bottom Opening, Crane Type (BK Type)"

[Patented Product] Contributes to labor-saving during discharge! Bolt-assembled industrial waste box container!

The "Bottom-Opening Crane-Type Industrial Waste Container" is a box that can be emptied simply by unlocking it and lifting it with a crane. After emptying, the bottom plate closes just by moving it down, and it locks automatically, completing the process. This contributes to labor-saving in operations. It is a reasonably priced, impact-resistant steel industrial waste container, characterized by its design that enhances image. Additionally, since each panel is fastened with bolts and nuts, it can be disassembled, assembled, or changed in type by one person. 【Features】 ■ Impact-resistant steel container ■ One side can be replaced in case of damage ■ Long-lasting structure that is resistant to rust ■ Suitable for both forklifts and lifting lanes ■ Can be stacked in multiple layers, also useful as a storage container ■ Easy to change models even after introduction *For more details, please refer to the PDF materials or feel free to contact us.

Company：アーク・ロット
Price：Other

container
container

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Industrial Waste Container "Open Bottom Container (SDI Type)"

You can open the bottom plate while remaining on the lift! An air cushion type is also available.

We would like to introduce our industrial waste container, the "Open Bottom Plate Container (SDI Type)." The bottom plate can be opened while still on the lift (crane). It was previously difficult to open with the force of pulling a cord due to the load weight, but this machine allows for easy opening. We also offer an air cushion type as an option. Please feel free to contact us if you would like to place an order. 【Upper Insertion Port Specifications (Partial)】 ■0.9m2 Type ・W (Width): 1330 ・D (Depth): 1025 ・H (Height): 1200 ・Weight: 208 ・Lift Insertion Port: L1-300, L2-600 *For more details, please download the PDF or feel free to contact us.

Company：アーク・ロット
Price：Other

container
container

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Industrial Waste Container "High-Place Bottom Plate Opening and Closing Type (WT-BL Type)"

Detaching and attaching the container and lift is very easy! The operating load is based on the lift's lifting capacity.

The "High Position Bottom Plate Opening and Closing Type (WT-BL Type)" is a waste container operated by a hinge-type forklift. It allows for the opening and closing of the bottom plate at a high position, resolving previous inconveniences during loading and unloading. It can be easily connected by bringing it to a general position, and after connection, the container automatically moves to the correct position through automatic alignment, ensuring safety and cost efficiency. Please feel free to contact us when you need assistance. 【Specifications (Partial)】 ■WT-BL-1.5m2 ・W(mm): 1940 ・D(mm): 1020 ・D2(mm): 1220 ・H(mm): 1200 ・Weight(kg): 338 *For more details, please download the PDF or feel free to contact us.

Company：アーク・ロット
Price：Other

container
container

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Industrial Waste Container "Lift Rotating Type (LR Type)"

Streamline your work with lifts! Introducing containers available in a wide variety.

We would like to introduce our industrial waste container, the "Lift Rotating Type (LR Type)." With the use of a rotating lift, the processing speed is outstanding. The lift attachment specifications include "front two-way difference," "side two-way difference," and "front-side four-way difference," among others. For your specified topcoat products, we can ship from 5 units or more, while our standard color products can be shipped from just 1 unit. Please feel free to contact us when you need assistance. 【Specifications (partial)】 ■LR1.5 ・W(mm): 1940 ・D(mm): 1025 ・H(mm): 1130 ・Weight (approx): 240 kg *For more details, please download the PDF or feel free to contact us.

Company：アーク・ロット
Price：Other

container
container

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Industrial Waste Container "Side Opening Type (SO Type)"

The definitive version of industrial waste containers! Our designated standard color products can be shipped from just one unit.

We would like to introduce our industrial waste container, the "Side Opening Type (SO Type)." It's easy to open the container in just 1, 2, 3. It can be opened and closed by one person, saving labor. We offer two types: one with a pipe insertion port in the 1335 direction and another with a pipe insertion port in the 1940 direction. Please feel free to contact us if you would like to order. [Types] ■ Lift Type with pipe insertion port in the 1335 direction ■ Pipe insertion port in the 1940 direction *For more details, please download the PDF or feel free to contact us.

Company：アーク・ロット
Price：Other

container
container

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Industrial Waste Container "Side Half-Open Type (SHO Type)"

Easy, open the container in 1, 2, 3! For more efficient cargo handling.

We would like to introduce our industrial waste container, the "Side Half-Open Type (SHO Type)." It can be opened and closed by one person, making it labor-saving. We offer two types: "SH-0.75" and "SH-1.5." Please feel free to contact us when you need assistance. 【Specifications (partial)】 ■SH-0.75 ・W(mm): 1025 ・D(mm): 1025 ・H(mm): 1130 ・Weight (kg): 135 *For more details, please download the PDF or feel free to contact us.

Company：アーク・ロット
Price：Other

container
container

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High-performance industrial waste container equipped with safety, efficiency, and durability.

Introducing high-performance industrial waste containers that are space-saving with multi-layer stacking! Affordable and durable!

This catalog is a comprehensive catalog featuring container products such as industrial waste containers that our company handles. We introduce the "open-bottom container" that can be easily opened and the "high-opening bottom container" that can be easily moved to any location with a crane. Additionally, we have products for those who want to operate general containers with a lift or a crane. Please take a look. [Featured Products (Excerpt)] ■ Standard Type ■ Lift Rotating Type ■ Dump Crane Type ■ Dump Lift Type ■ Bottom Opening Crane Type *For more details, please download the PDF or feel free to contact us.

Company：アーク・ロット
Price：Other

container
container

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Dismantling Container "T-BOX"

A manufacturer that has specialized in custom production until now introduces a new standard to the world.

The "T-BOX" is a detachable container that is robust and highly weather-resistant. Its design combines wear-resistant steel plate HARDOX and SS400, resulting in a sturdy and weather-resistant product. With full circumferential welding by skilled craftsmen, it offers excellent transport efficiency and stability for long-term use. Additionally, we also offer custom-made cargo beds "T-CON" that match your needs, crafted with expert techniques. 【Features】 ■ Utilizes wear-resistant steel plate HARDOX, achieving a robust and highly weather-resistant product ■ Full circumferential welding by skilled craftsmen allows for long-term use ■ Product design combining SS400 improves transport efficiency and stability *For more details, please download the PDF or feel free to contact us.

Company：ナニワプロジェックス
Price：Other

Steel
alloy
container

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Next Container Mixer 'CTM-94'

By eccentricity of the mixing angle, it exhibits a mixing ability unlike anything seen before!

The "CTM-94" is a container mixer that achieves space-saving through its cantilever design and offers easy operability. By offsetting the mixing angle, it demonstrates a mixing capability that is unprecedented. Additionally, it can accommodate containers of different types, making it excellent for small-batch, diverse production. 【Features】 ■Significantly reduces mixing time ■Enables precise mixing ■Can accommodate containers of different types ■Achieves space-saving through cantilever design ■Easy to operate *For more details, please refer to the PDF document or feel free to contact us.

Company：ジェイピーネクスト
Price：Other

Mixer/agitator
container

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Storage box - a heavy-duty container that can be divided into three sections.

Compactly organized and stored!

Stacking is allowed up to 3 tons. The standard size is 1,100 x 1,100, and the height can be freely made from 300 to 1,200.

Company：コンドー・マシナリー
Price：Other

furniture
container

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

container Product List and Ranking from 178 Manufacturers, Suppliers and Companies | IPROS GMS

container Manufacturer, Suppliers and Company Rankings

container Product ranking