更新日： 集計期間:Dec 31, 2025～Jan 27, 2026
※当サイトの各ページの閲覧回数を元に算出したランキングです。
更新日： 集計期間:Dec 31, 2025～Jan 27, 2026
※当サイトの各ページの閲覧回数を元に算出したランキングです。
更新日： 集計期間:Dec 31, 2025～Jan 27, 2026
※当サイトの各ページの閲覧回数を元に算出したランキングです。
1261～1275 件を表示 ／ 全 2368 件
24-Channel Intelligent Counter/Controller
The VME-2540 Intelligent Counter/Controller (ICC) is a VMEbus slave I/O module designed to provide high-precision digital measurement and function generation capability for VMEbus systems with a simple, consistent memory-mapped user interface.
It can be used as a solution for a wide range of pressure measurement applications.
The "Passive Gauge Controller" is a product that can be used as a solution for a wide range of pressure measurement applications, from HV devices to process industries, and even in cyclotrons where active gauges cannot be used. The controller is available in two types: "PGC201," which is used with Pirani vacuum gauges and Penning vacuum gauges, and "PGC202," which covers an even broader range when used with Pirani vacuum gauges and ionization vacuum gauges. 【Features (Pirani Vacuum Gauge Sensor)】 ■ Tungsten or platinum filament ■ Economical detection cell ■ Complete alignment and temperature compensation from 0 to +40°C ■ Stable maintenance of filament temperature *For more details, please refer to the PDF document or feel free to contact us.
Local control of the heater circuit is possible! It displays the measured temperature/setting temperature and alarm status.
The "JBS-100-ECP-A" is a temperature controller with a power connection box for Raychem heating cables and PYROTENAX MI heating cables. Utilizing the features of the JBS-100-A power connection kit and temperature controller, this controller enables local control of the heater circuit. This controller has a window and a digital display section, showing the measured temperature/setting temperature and alarm status (when detecting RTD failure, high temperature, or low temperature). 【Features】 ■ Alarm status can be externally displayed using a voltage-free contact (C contact) ■ Hold temperature can be set up to 218°C ■ Power supply voltage can be used from 100Vac to 277Vac, with a contact capacity of up to 30A ■ The 100Ω RTD temperature sensor feeds back the pipe hold temperature or outdoor temperature for freeze prevention to the controller ■ Since the power connection and temperature controller are integrated, installation costs can be reduced *For more details, please refer to the PDF document or feel free to contact us.
Tensiometer-based automatic irrigation system
■Features ● Outputs ON/OFF signals in combination with a tensiometer soil moisture sensor, enabling automatic irrigation through the opening and closing of solenoid valves ● Three types of measurement modes: irrigation control, level control, and pressure measurement ● Settings for irrigation time and rest time are possible ● Easy operation with an LCD display featuring a backlight ● Display of three types of pressure units: pF, cmH20, and kPa ● Operates for a long time with replaceable AA batteries, and battery level is also displayed ● Data can be extracted via analog signals and timing signals for data loggers or computers ● Stored in a waterproof case with a snap lock, and measurement display can be operated with an external switch
It is used in research and development, quality control of raw materials, intermediates, and final products, and in product inspection departments.
- NEW: Up to 99 condition registrations - NEW: Quiet operating sound with optimized controls - NEW: Equipped with a USB interface compatible with the classification evaluation software EasySieve - Compatible with both dry and wet processes - Efficient sieving in a short time - Effective electromagnetic shaking - Three-dimensional classification with vertical, horizontal, and twisting effects, allowing the sample to evenly shake across the entire mesh surface. - By setting the acceleration "g" of the sieve bottom, classification results can be compared globally - Maximum sieve frame size: 620 mm (optional) - Time, amplitude, acceleration, and interval can be digitally set. - Intermittent operation possible - Optionally, the classification evaluation software EasySieve can be used. This allows for remote operation of the sieve shaker, evaluation of classification results, and documentation (in English/German). - Ideal for sample monitoring in compliance with ISO9001 and other international standards - Calibration possible; inspection certificate issuance - Easy to operate with an ergonomic design - Maintenance-free
All driving conditions can be set digitally! For experiments that require higher reproducibility and operability!
The electromagnetic sieve shaker "AS200 series" adopts an electromagnetic drive that allows for amplitude adjustment, making it suitable for classifying various types of samples. It is a sieve shaker that can effectively separate even in a short time. The "AS200 Control" allows all operating conditions to be set digitally, with the ability to register up to 99 conditions. Additionally, a calibration certificate is included as standard. This model complies with ISO9001 guidelines. 【Features】 ■ Up to 99 condition registrations ■ Quiet operation due to optimized control ■ USB interface compatible with the classification evaluation software EasySieve ■ Suitable for both dry and wet sieving ■ Efficient separation in a short time ■ Effective electromagnetic shaking ■ Three-dimensional effects of vertical, horizontal, and twisting shaking, allowing samples to evenly shake across the entire mesh ■ Calibration possible; inspection certificate issuance ■ Maintenance-free *For more details, please refer to the PDF document or feel free to contact us.
Compatible with a Φ305mm test sieve! Achieves efficient sieving in a short time!
The electromagnetic sieve shaker "AS300" employs an adjustable amplitude electromagnetic drive, making it suitable for classifying various types of samples. It is a sieve shaker that can effectively separate materials even in a short amount of time. The "AS300 Control" is compatible with a test sieve of Φ305mm, which has a mesh area 2.25 times larger than that of a Φ200mm test sieve, significantly reducing classification time. Additionally, all operating conditions can be set digitally, and a calibration certificate is included as standard. This model is suitable for experiments requiring higher reproducibility and operability. 【Features】 ■ Up to 99 condition registrations ■ Quiet operation due to optimized control ■ USB interface compatible with classification evaluation software EasySieve ■ Suitable for both dry and wet sieving ■ Efficient separation in a short time ■ Effective electromagnetic shaking ■ Three-dimensional classification with vertical, horizontal, and twisting effects, allowing samples to evenly shake across the entire mesh surface ■ Calibration possible; inspection certificate issuance ■ Maintenance-free *For more details, please refer to the PDF document or feel free to contact us.
Easy-to-set digital temperature controller (ON/OFF control)
You can easily control the heater's temperature with a digital display.
Compact and very easy to use, it comes with an output adjustment knob, allowing for fine control. Thanks to PID control, it can also prevent overshoot.
Industrial heater temperature controller equipped with numerous functions necessary to control various heaters.
The high-precision control of the renowned TCX-15F is preserved while condensing the necessary functions into a compact housing. It is a space-saving wall-mounted temperature controller.
■ Voltage-free: AC 100V to 240V ■ Sensor-free: Compatible with K-type thermocouples or temperature resistance sensors (Pt100Ω) ■ Equipped with output adjustment dial ■ Control method: PID control (with auto-tuning) or ON/OFF control ■ Protection: Equipped with circuit protector
A device that integrates a regulator and an internal pressure adjustment controller.
A device for filling the appropriate amount of air. It is essential for bulk packaging.
With the communication function, temperature settings and monitoring can be done from a PC! Temperature and parameter settings are easy.
The TA-151 is a compact, high-precision controller specifically designed for Peltier elements. Input voltage: 8-24V, output current: 8A max, temperature setting range: -80 to +150°C, providing high cost performance due to limited basic functions. The external dimensions are W120×D100×H44mm (excluding protrusions), and with communication capabilities, temperature settings and monitoring can be done from a PC. 【Features】 ■ Compact and high precision ■ High cost performance due to limited basic functions ■ Easy temperature and parameter setting ■ Temperature setting and monitoring possible from a PC via communication functions *For more details, please refer to the PDF document or feel free to contact us.
The lineup includes the MFC-S series equipped with a sensor timer function!
We would like to introduce the "Electromagnetic Controller" handled by Sankik Co., Ltd. The "MFC-S Series" utilizes a piezoelectric vibration sensor that has been used traditionally, enabling constant amplitude control. The "MFC-N Series" features phase control, allowing for switching between half-wave and full-wave, and is compatible with both 100V and 200V. [MFC-S Series Features] ■ Digital setting and display ■ Soft start/stop function ■ Sensor timer function ■ Operating signal output ■ Speed switching *For more details, please refer to the PDF materials or feel free to contact us.
Introduction of the synchronous rectification NVDC battery boost/buck charging controller 'bq25703A'.
With a synchronous rectification NVDC battery buck-boost charging controller, it is possible to build a solution with fewer components and high efficiency for charging applications that accommodate various types of batteries while being space-constrained. The NVDC-1 configuration allows the system to be regulated to the battery voltage while maintaining the system above its minimum voltage. The system can continue to operate even if the battery is fully discharged or removed. When the load power exceeds the rated input power, the battery transitions to a supplemental mode to prevent overload of the input power source. Additionally, it charges the battery from a wide range of input power sources, including USB adapters, high-voltage USB PD sources, and traditional adapters. *For more details, please contact us.
